Problems with the testing of querys in view objects

I am working whih view object and i like to do one query with parameters for it(all with the wizard).
The help of wizard no help me, because i write the clause where similar to the clause of the help.
the error is:
ORA-00904
Exception:java.jql.SQLException
Thank you for the attention.

Hi Lynn
Excuse me, i don't well explain my problem.
I do the query of view object with the wizard of JDeveloper 3.2. i push the 'expert mode' and 'use ? style parameters' selection, and i build the query:
SELECT EntVariable.COD,
EntVariable.NOMBRE,
EntVariable.DESCRIPCION,
EntVariable.RANGO_INFERIOR,
EntVariable.RANGO_SUPERIOR,
FROM VARIABLE EntVariable
WHERE :1 = EntVariable.NOMBRE
When i push the button of 'Test' the query appear the error:
java.sql.SQLException: ORA-00904: nombre de columna no valido
void oracle.jdbc.dbaccess.DBError.throwSqlException(java.lang.String, java.lang.String, int)
void oracle.jdbc.ttc7.TTIoer.processError()
void oracle.jdbc.ttc7.Oall7.receive()
void oracle.jdbc.ttc7.TTC7Protocol.doOall7(byte, byte, int, byte[], oracle.jdbc.dbaccess.DBType[], oracle.jdbc.dbaccess.DBData[], int, oracle.jdbc.dbaccess.DBType[], oracle.jdbc.dbaccess.DBData[], int)
oracle.jdbc.dbaccess.DBColumn[] oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(oracle.jdbc.dbaccess.DBStatement, byte[], oracle.jdbc.dbaccess.DBDataSet)
void oracle.jdbc.driver.OracleStatement.doExecuteQuery()
void oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout()
int oracle.jdbc.driver.OraclePreparedStatement.executeUpdate()
java.sql.ResultSet oracle.jdbc.driver.OraclePreparedStatement.executeQuery()
java.lang.Exception oracle.jbo.dt.ui.view.VOClausePanel.testSQL()
java.lang.Exception oracle.jbo.dt.ui.view.VOClausePanel.testAction()
void oracle.jbo.dt.ui.view.VOClausePanel.actionPerformed(java.awt.event.ActionEvent)
void javax.swing.AbstractButton.fireActionPerformed(java.awt.event.ActionEvent)
void javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(java.awt.event.ActionEvent)
void javax.swing.DefaultButtonModel.fireActionPerformed(java.awt.event.ActionEvent)
void javax.swing.DefaultButtonModel.setPressed(boolean)
void javax.swing.plaf.basic.BasicButtonListener.mouseReleased(java.awt.event.MouseEvent)
void java.awt.Component.processMouseEvent(java.awt.event.MouseEvent)
void java.awt.Component.processEvent(java.awt.AWTEvent)
void java.awt.Container.processEvent(java.awt.AWTEvent)
void java.awt.Component.dispatchEventImpl(java.awt.AWTEvent)
void java.awt.Container.dispatchEventImpl(java.awt.AWTEvent)
void java.awt.Component.dispatchEvent(java.awt.AWTEvent)
void java.awt.LightweightDispatcher.retargetMouseEvent(java.awt.Component, int, java.awt.event.MouseEvent)
boolean java.awt.LightweightDispatcher.processMouseEvent(java.awt.event.MouseEvent)
boolean java.awt.LightweightDispatcher.dispatchEvent(java.awt.AWTEvent)
void java.awt.Container.dispatchEventImpl(java.awt.AWTEvent)
void java.awt.Window.dispatchEventImpl(java.awt.AWTEvent)
void java.awt.Component.dispatchEvent(java.awt.AWTEvent)
void java.awt.EventQueue.dispatchEvent(java.awt.AWTEvent)
boolean java.awt.EventDispatchThread.pumpOneEvent()
void java.awt.EventDispatchThread.pumpEvents(java.awt.Conditional)
void java.awt.EventDispatchThread.run()
so i haven't code because the code not generate it,
I know that i must to ask to the Oracle service tecnical because the view object i think that is well build it, but now i can't.
sorry my english.
If you think a good idea, it is will fantastic, because i need it this 'where' on this view object.
Thank you for all.

Similar Messages

Problem with the webuijsf:helpwindow component (Illegal view id )

Hello
I just tried the helpwindow component of woodstock 4.3.
After starting the application, I always get this error in the glasfish log
JSF1010: Illegal view ID faces/com_sun_webui_jsf/help/helpwindow.jsp. The ID must begin with '/'
WebModule[POSWareLizenz]Illegal view ID faces/com_sun_webui_jsf/help/helpwindow.jsp. The ID must begin with /
java.lang.IllegalArgumentException: Illegal view ID faces/com_sun_webui_jsf/help/helpwindow.jsp. The ID must begin with /
at com.sun.faces.application.ViewHandlerImpl.getActionURL(ViewHandlerImpl.java:627)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.getActionURL(ViewHandlerImpl.java:244)
I am using this environment:
Vista x64 (german), q6600, 8Gigs Ram, Glasfish v2ur2, netbeans 6.1
The four required pages buttonnav.jsp, helpwindow.jsp, navigator.jsp and tips.jsp are installed under the path com_sun_webui_jsf/help, prefixed with faces.
This pages were extracted from the downloadable Woodstock.4.3-200806241804.jar
The helpwindow component is startet from a masthead component in this way
<webuijsf:masthead dateTime="true" id="masthead1" productImageDescription="POSWare Lizenzanwendung"
 serverInfo="#{MastHeadBean.serverInfo}" serverInfoLabel="Server" style="left: 0px; top: 0px; position: absolute; width: 1030px"
 userInfo="#{MastHeadBean.userInfo}" userInfoLabel="Benutzer">
 <f:facet name="brandImage">
 <webuijsf:image alt="(C) ebit company" height="100" url="/resources/ebit logo.GIF" width="100"/>
 </f:facet>
 <f:facet name="versionLink">
 <webuijsf:hyperlink actionExpression="#{Page1.versionlink_action}" id="versionlink"
 onClick="javascript: var versionWin = window.open('faces/VersionPage.jsp','VersionWindow','scrollbars,resizable,width=650,height=500,top='+((screen.height - (screen.height/1.618)) - (500/2))+',left='+((screen.width-650)/2) ); versionWin.focus()"
 text="Version" toolTip="Version dieser Anwendung"/>
 </f:facet>
 <f:facet name="helpLink">
 <webuijsf:helpWindow windowTitle="Window Title Param"
 toolTip="Help for This Page (Opens a New Window)"
 linkIcon="true" linkText="Hilfe" />
 </f:facet>
 <f:facet name="logoutLink">
 <webuijsf:hyperlink text="Logout"/>
 </f:facet>
 <f:facet name="productInfo">
 <h:panelGrid columns="3" id="gridPanel3">
 <webuijsf:image height="120" url="/resources/POSware%20Logo%20klein.gif" width="120"/>
 <webuijsf:staticText style="font-style:bold; font-size:300%;color:white;" text="POSWare Lizenz Anwendung"/>
 </h:panelGrid>
 </f:facet>
 </webuijsf:masthead>There are three possibilities: a.helpwindow is not yet functional, b.the download in the 4.3 download area contains some mistakes or c. I did something wrong.
Any Ideas?
Thank you

Lakshmi,
I think you dont need to create a z component .you can enhance your existing component(if you enhance you willnot have any of these problems)
check these blogs on how to enhance a component
The Three Use Cases of the Enhancement- and Switch-Framework - Part 1
The Three Use Cases of the Enhancement- and Switch-Framework - Part 2
search for Thomas Weiss blogs on enhancement
Thanks
Bala Duvvuri

Problem with in-memory filtering: JBO-25016: View object is read only

Hello,
I have problem with implementation of Steve's Muench example #71 - Dropdown Lists in Table with Different Choices per Row.
Source for the list is a read only view object.
Invoking viewObject.findByViewCriteria throwing:
javax.faces.el.EvaluationException: oracle.jbo.ReadOnlyViewObjectException: JBO-25016: View object ... is read only.
What's wrong?
Rado
Error stack:
Caused by: oracle.jbo.ReadOnlyViewObjectException: JBO-25016: View object ... is read only.
     at oracle.jbo.server.ViewDefImpl.newInstance(ViewDefImpl.java:991)
     at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:2784)
     at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1271)
     at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:1869)
     at oracle.jbo.server.ViewRowSetImpl.makeRowCopy(ViewRowSetImpl.java:1546)
     at oracle.jbo.server.ViewRowSetImpl.insertRowAtInternal(ViewRowSetImpl.java:1667)
     at oracle.jbo.server.ViewRowSetImpl.findByViewCriteria(ViewRowSetImpl.java:4126)
     at oracle.jbo.server.ViewObjectImpl.findByViewCriteria(ViewObjectImpl.java:7033)
My code:
public RowIterator selectDetails(String code) {
ViewObject vo = getVO();
if (!vo.isExecuted()) {
vo.setQueryMode(ViewObject.QUERY_MODE_SCAN_DATABASE_TABLES);
vo.executeQuery();
vo.last();
vo.setQueryMode(ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);
ViewCriteria vc = vo.createViewCriteria();
ViewCriteriaRow vcr = vc.createViewCriteriaRow();
vcr.setAttribute("Code", "='"+code+"'");
vc.add(vcr);
vc.setCriteriaMode(ViewCriteria.CRITERIA_MODE_CACHE);
return vo.findByViewCriteria(vc,-1,ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);
}

check attribute settings of your VO...
the attribute for wich you set view criteria must be set to queryable and updatable - always

Problem with the Z axis...blurred objects...what'd I miss?

Howdy,
I've got some vector objects in Flash that start out real small--like 20-30 pixels square. When I change their position on the Z axis to 'zoom in' on them, the larger they get, the blurrier they get.
When I just tween the x/y size, and not move the z axis they look fine.
For example draw a 20x20 square on the stage.
Convert it to a movie clip so that I can 3D it.
Scale it up to 300 pixels.
Looks fine.
Adjust the Z axis by 1.
Blllluuuurrrrrrrrr.
Did I miss a setting somewhere or is this just a limitation that needs to be worked around?
Thanks in advance,
-Ted

Rothrock, Excellent link, thanks for that! Have some points.
After reading it:
crap.
Looks like I need to learn about hand coding the 3d effects, or using scaling instead and adding switch when I need the z....
Hmmm...that'll require a little mor coffee.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.
Just started happening yesterday.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Do you see any prefs related to that knoxnews.com site on the about:config page if you enter that URL in the Filter?
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I am having problems with the month of October. When I have the full month view, the synced items from google calendars won't show. But they do for all the other months.

I am having problems with the month of October. When I have the full month view, the synced items from google calendars won't show. But they do for all the other months. There is definitely a glitch somewhere because if I am on day view and try to click on day 15 of October, it will not let me. It totally is acting weird.

Free fonts, fonts from a reliable foundry?
Have you tried removing them temporarily?
Do you still have problems if you create a new Windows user account and log in with that? How about if you start in Safe Mode?
And I would run a memory checker and see Troubleshoot font problems | Windows

Problems with the display when I change the view

Hi,
I have recently downloaded th emost up to dat everion of itunes and I have a problem when I change the view. All I get is a black screen down the right hand side where the library details sit. This eventually clears but is **** annoying. It also happened when I had version V7.01 running.
Any ideas?
Thanks,
Fujitsu Siemens MS 6567V2 Windows XP

Helpful AnswerRe: Have anyone problems with the dock? when I start the imac it doesn't appears
27-jun-2011 15:58 (in response to pocoto)
If you run Parallels, this is one of the symptoms of this issue:
http://kb.parallels.com/en/111541
Regards,
Captfred
Like (0) Reply
Captfred post me this page, follow the instrutions on parallels preferences and for me it works. Try it and let us knows if it's works for u too..Regards

Why cant I rotate and save a picture from iphone 4s in windows photo viewer windows 7? the error is cannot save because there is a problem with the photo properties. I can rotate and save screenshots

why cant i rotate and save a picture from iphone 4s in windows photo viewer windows 7? the error is cannot save because there is a problem with the photo properties. I can rotate and save screenshots

Windows do not repect the digital EXIF specification. Use a free viewer http://www.irfanview.net/ for Windows.

Information you exchange with this site cannot be viewed or changed by others, However there is a problem with the

Team,
Getting below X mark for couple of users when they are using outlook.
Information you exchange with this site cannot be viewed or changed by others, However there is a problem with the
site's security certificate
X- the security certificate was issued by a company you have not chosen to trust.
view the certificate to determine whether you want to trust the certificate authority.
we have 2 child domain namely us.com and emea.com.
us.com users are getting a certificate pop up on outlook , but the entry on the top is showing as server.emea.com which is not belongs to us.com
checked the certificates on us child domain cas/ht server and there are no SAN entry listed for emea.com, it was working earlier and started week back.
any help in this matter is appreciated.
regards
Srinivas
Srinivasa K

Hi,
According to your description, your Outlook clients on child domain us.com come across the security alert about one name of another child domain. If I misunderstand your meaning, please feel free to let me know.
If yes, I'd like to recommend you check if there is any URL which is set with the name. Additionally, please check if there is any expired certificate.
Thanks,
Angela Shi
TechNet Community Support

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

Problem with the AF of my new 18-135mm EFS IS STM lens

Hello,
The lens came with the EOS Rebel T5i bundle.
The auto focus is working incorrectly, focusing closer than the detected area. This is happening when I use the viewfinder. When a picture is taken using the “direct view” (LCD display) it focus correctly.
I didn’t use the camera a lot since I bought it, now looking the first pictures I see that this problem is happening since I bought it.
I changed the zoom lens with another Canon camera and then my new Rebel T5i works fine and the same problem happens with the other camera, therefore I’m sure that the problem is in the lens and not in the camera body.
The out of focus is more noticeable when I'm taking pictures in 18mm position to an object farther than 2 meters but it is happening in any zoom position. It is clear when I compare the same picture taken with the viewfinder with one taken with the LCD Display.
I updated the body firmware and the problem continues.
Is it possible to update the lens firmaware? I couldn’t find them in the canon webpage.
I will go into an important trip next week, therefore I will not have time to send the camera to repair.
Any idea?
Thanks!

You may want to rent a lens for your trip and get this lens to service.
You'll want to be sure it really is a problem with the lens (it sounds like it is from your description). Test the lens against a "flat" target (such as a wall). You can hang something on the wall with high-contrast (newspaper works great) and put the camera on a tripod. The idea is that (a) the camera is definitely not moving, (b) the focus target is definitely not moving, and (c) the target is flat and there are no distracting objects in the field of view so it's not possible for the focus system to decide to lock focus on anything OTHER than your intended target.
Next... deliberately turn the focus ring to put the camera out of focus (so that the camera HAS to move the focus). This is mildly tricky with an STM lens since there's no mechanical link from the focus ring to the lens -- it's electronic. The lens only accepts focus input when focus is active (e.g. half-press the shutter button, etc. to wake it up.) I run focus all the way in and test several times, then run focus all the way out and test several times (that way it has to move focus in both directions.)
If the lens is consistently focusing closer, then it will need service.
Tim Campbell
5D II, 5D III, 60Da

Problems with the vba command sendkeys in Access 2013.

Hi, I have problems with the vba command sendkeys in Access 2013.
I use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field, then place (paste) the text in a Word document. The command line sendkeys
is followed by moving the focus to a particular control. In Access 2003, which went smoothly. Now the sendkeys command is executed only in Access 2013 in the control that then receives focus. If the procedure ends with the sendkeys command then it works well.
The procedure with the sendkeys command is activated by a button on a form.
Who can help me?
private user

Hi H.Plmp,
Based on the description, you want to call the sendkeys from a button.
>> use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field<<
What did you mean that you no control? And how did you get the text in memory from the text field? Also I am not able to understand the exact reason that the command doesn't works in Access 2013.
And based on the test, sendkeys "+ {Delete}" works well for me when I set a focus for the textbox control. Here is th test code:
Me.Controls("txtField1").SetFocus
SendKeys "+ {DELETE}", 1
If I misunderstood, please feel free to let me know.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem with the standard RMDATIND

Good afternoon
I say that tango is a problem with the standard load of the material RMDATIND where the burden me all the good materials but in the CAT type of feedstock me what brand as subject to lot but I do not step parameter that the program that will be That someone can help me ..

Thanks for the suggestion to debug the problem - but I have no idea what I'm looking for.
I answer to your question, this is not restricted to just the one user. It has happened to a few, but not all. Not sure what the trigger is.
Now it has happened for a non-portal user, that is to say when I run it test mode from SE80. Debugging has not shed any light on it. All behaves as I would expect. All the alv formatting code is executed, then the component loads and by default the 'standard view' has all column set as hidden.
Looking at this from a different perspective, when, in an alv you create a custom view and 'save as' to store the settings, does anyone know where that is saved too ? Can we delete the settings for the user ? or see the personalization ?

Problem with the cache hit ratio

Hello,
I ma having a problem with the cache hit ratio I am geting. I am sure, 100% sure, that something has got to be wrong with the cache hit ratio I am fetching!
1) I will post the code that I am using to retrieve the cache hit ratio. I've seen about a thousand different equations, all equivalent in the end.
In oracle cache hit ratio seems to be:
cache hits / cache lookups,
where cache hits <=> logica IO - physical reads
cache lookups <=> logical IO
Now some people use the session logical Reads stat, from teh view v$sysstat; others use db block gets + db consistent gets; whatever. At the end of the day its all the same, and this is what i Use:
SELECT (P1.value + P2.value - P3.value) AS CACHE_HITS, (P1.value + P2.value) AS CACHE_LOOKUPS, P4.value AS MAX_BUFFS_SIZEB
FROM v$sysstat P1, v$sysstat P2, v$sysstat P3, V$PARAMETER P4
WHERE
P1.name = 'db block gets' AND
P2.name = 'consistent gets' AND
P3.name = 'physical reads' AND
P4.name = 'sga_max_size'
2) The problem:
The cache hit ratio I am retrieving cannot be correct. In this case i was benchamarking a HUGELY inneficient query, consisting of the Union of 5 Projections over the same source table, and Oracle is configured with a relatively small SGA of 300 MB. They query plan is awful, the database will read the source database table 5 times.
And I can see in the physical data statistics of the source tablespace, that total Bytes read is aproximatly 5 times the size of the text file that I used to bulk load data into the databse.
Some of the relevant stats, wait events:
db file scattered read 1129,93 seconds
Elapsed time: 1311,9 seconds
CPU time: 179,84
SGA max Size: 314572800 Bytes
And total bytes read: 77771964416 B (aproximatly 72 Gga bytes)
the source txt loaded to the database was aprox 16 G
Number of reads was like 4.5 times the source datafile.
I would say this, given the difference between CPU time and Elapsed Time, it is clear that the query spent almost all of its time doin DB file scattered reads. How is it possible that i get the following cache hit ratio:
Cache hit Ratio: 0,92
Cache hits: 109680186
Cache lookups: 119173819
I mean only 8% of that Logical I/O corresponded to physical I/O? It is just not possible.
3) Procedure of taking stats:
Now to retrieve these stats I snapshot the system 2 times. One before the query, one after the query.
But: this is not done in a single session. In total 3 sessions are created. One session two retrieve the stats before the query, one session to run the query, a last session to snapshot after the query.
Could the problem, assuming there is one, be related to this:
"The V$SESSTAT view contains statistics on a per-session basis and is only valid for the session currently connected. When a session disconnects all statistics for the session are updated in V$SYSSTAT. The values for the statistics are cleared until the next session uses them."
What does this paragraph mean. Does it mean that the v$sysstat only shows you the stats of the last session that closed? Or does it mean thtat v$sysstat is increamented with the statistics of each v$sessionstat once a session terminates? If so, then my procedure for gathering those stats should be correct.
Can anyone help me sort out the origin of such a high cache hit ratio, with so much I/O being done?

sono99 wrote:
Hi,s
first of, let me start by saying that there were many things in your post that you mentioned that I could no understand. 1. Because i am not an Oracle Expert, i use whatever RDBMS whenever i need to. 2. Because another problem has come up and, right now, i cannot inform myself to be able to comprehend it all.Well, could it be that you need to understand the database you are working on in order to comprehend it? That is why we strongly advise you to read the concepts manual first, you need to understand the architecture that Oracle uses, as well as the basic concepts of how oracle does locking and maintains read consistency. It does these different than other database engines, and some things become nonsense if looked at from the viewpoint of a single user.
>
quote:
It would be useful to see the execution plan jhust in case you have simplified the problem so much that a critical detail is missing.
First, the query code:
2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:>SQL> CREATE TABLE FAVFRIEND
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 2 NOLOGGING TABLESPACE TARGET
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 3 AS
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 4 SELECT ID as USRID, FAVF1 as FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 5 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 6 SELECT ID as USRID, FAVF2 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 7 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 8 SELECT ID as USRID, FAVF3 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 9 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 10 SELECT ID as USRID, FAVF4 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 11 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 12 SELECT ID as USRID, FAVF5 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 13 ;
Now, Althought it is clear from the query that the statement is executed with the NOLOGGiNG, i have disabled the logging entirely for the tablespace.There are certain rules about nologging that may not be obvious. Again, this derives from the basic Oracle architecture, and if you use the wrong definitions of things like logging, you will be led down the primrose path to confusion.
>
Futhermore, yes, the RDBMS is a test RDBMS... I have droped the database a few times... And I am constantly deleting an re-inserting data into the source database table named PROFILE.>
I also make sure do check all the datafile statistics, and for this query the amount of RedoLog, Undo "Log", Templife used is negligible, practically zero.Create table is DDL, which has implied commits before and afterwards. There is a lot going on, some of it dependent on the volume of data returned. The Oracle database writer writes things out when it feels like it, there are situations where it might just leave it in memory for a while. With nologging, Oracle may not care that you can't perform recovery if it is interrupted. So you might want to look into statspack or EM to tell you what is going on, the datafile statistics may not be all that informative for this case.
>
Most of the I/O is reading, a few of the I/O is writing.
My idea is not to optimize this query, it is to understand how it performs. Well, have you read the Concepts manual?
I have other implementations to test, namely I having trouble with one of them.
Furthermore, I doubt the query Plan Oracle is using actually involves tablescans (as I I'd like it to do); because in the Wait Events, most of the wait time for this query is spent doing "db file scattered read". And I think this is different from a tablescan.Please look up the definition of [db file scattered read|http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#sthref703].
>
Do you really have to use sessions external to the query session ? Can you query v$mystat joined to v$statname from the session itself.
No, I don't want to that!
I avoid as much as possible having the code I execute being implemented in java. Why do you think java has anything to do with this? In your session, desc v$mystat and v$statname, these are views you can look at.
When i can avoid it I don't query the database directly through JDBC, i use the RDBMS command line client, which is supposed to be very robust. Er, is that sqlplus?
So yes, I only connect to the database with JDBC... in very last session.
Of course, I Could Have put both the gather stats before query and gathers stats after query a single script: the script that would be also runing the query.
But that would cause me a number of problems, namely some of the SQL i build has to be implemented dynamically. And I don't want to be replicating the snapshoting code into every query script I make. This way I have one sql with the snapshoting scripts; and multiple scripts for running each query. I avoid code replication in this manner.Instrumentation is a large subject; dynamic sql generation is something to be avoided if possible. Remember, Oracle is written with the idea that many people are going to be sharing code and the database, so it is optimized in that way. For SQL parsing in particular, if every SQL is different, you get a performance problem called "hard parsing." You can (and generally should, and sometimes can't avoid) use bind variables so that Oracle doesn't need to hard parse every SQL. In fact, this is one of those things that applies to other engines besides Oracle. I would recommend you read Tom Kyte's books, he explains what is going on in detail, including in some places the non-Oracle viewpoint.
>
Furthermore, Since the database is not a production database, it is there so I can do my tests. I don't have to be concerned with what other sessions may be doing to my system. There are only the sessions I control.No, there are sessions Oracle controls. If you are on unix, you can easily see this, but there are ways to see it on Windows, too. In some cases, your own sessions can affect themselves.
>
then what it the array fetch size ? If the array fetch size is large enough the number of block visits would be similar to the number of physical block reads.
I don't know what the arraysize you mention is. i have not touched that parameter. So whatever it is, it's the default.You should find out! You can go to http://tahiti.oracle.com and type array fetch size into the search box. You can also go to http://asktom.oracle.com and do the same thing, with some more interesting detail.
>
By the way, I don't get the query results into my client, the query results are dumped into a target output table.
So, if the arraysize has something to do with the number of rows that Oracle is returning the client in each step... I think it doesn't matter.You may hear this phrase a lot:
"It depends."
>
As for the query plan, If i am not mistaken you can't get get query plans for queries that are: create table as select.What?
JG@TTST> explain plan for create table jjj as select * from product_master;
Explained.
JG@TTST> select count(*) from plan_table;
COUNT(*)
 3
I can however commit the create table part and just call for the evalution of the Select part of the query; i believe it should be same.
"Optimizer" "Cost" "Cardinality" "Bytes" "Partition Start" "Partition Stop" "Partition Id" "ACCESS PREDICATES" "FILTER PREDICATES"
"SELECT STATEMENT" "ALL_ROWS" "2563" "586110" "15238860" "" "" "" "" ""
"UNION-ALL" "" "" "" "" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "512" "117222" "3047772" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "513" "117222" "3047772" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "513" "117222" "3047772" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "513" "117222" "3047772" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "513" "117222" "3047772" "" "" "" "" ""
This query plan was taken from sql developer, exported to txt, and the PROFILE table here has only 100k tuples.
Right now I am more concerned with testing the MODEL query. Which Oracle doesn't seem to be able any more... but that is a matter for another thread.
Regarding this plan. The Union ALL seems to be more than just a binary Operator... IT seems to be Neray.
The union all on that execution plan seems to be taking as leaf tables 5 99sono.Profile tables, and be making a table scan to them all. So I'd say that the RDBMS should only scan each database block once and not 5 times.
But: It doesn't seem to be so. IT seems like what oracle is doing is scanning completly each the table, and then moving on to next select statement in the UNION ALL. Because given the amount of source table that was read, 5 times greater than the size of the source table. Oracle didn't reuse read blocks.
But this is just my feeling.Your feeling is uninteresting. Telling us what you really hope to accomplish might be more interesting.
Anyway, in terms of consistent gets, how many consistent gets should the RDBMS be doing? 5
One for each table block?It depends.
>
My best regards,
Nuno (99sono xp).

Having Problems With The Neo2 ? Read This!!!!

Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :D

Ok.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world

Problems with the testing of querys in view objects

Similar Messages

Maybe you are looking for