Problems with the text/font in email

My iphone 4S is now, independently, displaying my email content in microscopic font. I even get some emails where the content "floats" across the screen. Why is that happening and how do I fix it?

i found that anti-alias is only good for bigger text
(12-24px).
whereas anything below 12 looks best when antialias is turned
off.
alias text is best for 8-12px. more crisp, less blurry.
I suppose text type would play a factor in this, but the
above, I realized for generic text (arial, geneva, etc.).

Similar Messages

Problem with the text from previous year in current year appraisal (PPR)

Hi Gurus,
I have some problem with the text from the PPR of the previous year in the PPR current year.
The text from the previous year have not the same displaying in the tab "previous year" of the current year PPR.
EXAMPLE :
this is write in the PPR of year 2009 in Individual Targets without Incentives (tab My S-imple) :
-Aufrechterhaltung der MA motivation, in dieser Zeit der Neuorientierung.
-G1 Unterstüzung
-Fachübergreifende Teamarbeit ausbauen
Gefährdungsbeurteilung weiter führen
-tragen von PSA einfordern
-VI Opt.(Intervalle)
-Azubi und Praktikanten AUsbildung unterstüzen
and this is what I have in the PPR of 2010 in Individual Targets without Incentives (tab Previous Year's Targets):
-Aufrechterhaltung der MA motivation, in dieser Zeit der-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
there is the error, all the end of the text isn't displayed and the begin of the text is repeated.
I think that this issue is created at the creation of the PPR.
If someone have a idea he is welcom.
thanks and regards

Hi,
Please follow the note:425601,
Go to Tcode: OBA5 change the error messge into warning message. carry out the settlement and roll abck the warning message into the error message after sucessfull settlement.
Reward points if found useful.
Thanks!

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
marek

How do I resolve a problem with the Pompiere font download?

How do I resolve a problem with the Pompiere font download for Word on a MacPro?

never mind... download must have been corrupt. re-downloading it seems to have fixed the problem.

Problem with the way fonts display in Internet Explorer

Howdy. I built a site about a week ago (first crack at this). It has quite a bit of content but seemed to be fine on Safari, Netscape and Firefox. I checked it out at work on a PC with Internet Explorer 6 and there were typography problems. I intentionally used simple web fonts (all Arial) to hopefully minimize this sort of thing. I used a 70% tint of Black for the font color on all the fonts. On Explorer the fonts display fine on pages 1, 2, 3, and 4. On page 5 the type appears blurry, really greyed and spread. I can't figure out why (same fonts and styles).
As an experiment I tried posting just a couple of pages with the type at 100% black. The really bad pages weren't so bad (but not nearly as good as on the other browsers.) The site is rballister.com. If you click on any of the links (picture boxes) on the "print & mail index" pages you will see the problem with the type. Thanks in advance for any help anyone can provide.

Because I thought it would be a nice effect, I decided to use the slider in the color pallette and change to color of the type from 100% black to 70% black (which is to to say a shade of gray). I'm referring to text that I keyboarded into iWeb. As previously mentioned, the gray type worked just fine on most browsers but caused problems in Internet Explorer (in a seemingly random way. Still can't figure out the reason). When I changed the type to black on a white background (black and white), the problem wasn't as bad as it was in Explorer, but still not nearly as good as in the other browsers.

Problems with the text graphic and the text itself.

Hello everybody. I have been making a site in Adobe Muse CC and I've run into some troubles. The textboxes I've made are not like textboxes, in preview mode, but more like a picture. This also makes the text look blurry when you zoom into the page. Is there a way to make the text in the textboxes like a real text and not like a picture. Make the textmoxes so that you can mark the words and letters, just like you can in a normal website.

I have tried several fonts but it's still blurry and unclear when I preview it in a browser.
I believe it has something to do with the textboxes.
Karamelrand | Smith'N'Jones You can try and look at the page here. The text is like a picture.
Is that fixable?

Problem with the text in my oracle report

hi
I am create an oracle 9i report which consists of some text.
While writing the text , i want to type some alaphets as the power of a a number. For example, 1 to the power of 'st' (i.e. first). Can anybody help me out.
Thanks in advance

Hi,
I don't think you'll be able to do it. It's a special effect, like Superscript in MS Work, that you can apply to a part of the text, but Oracle Reports (at least version 9.0.4.0.33 i'm working with) has only 2 of them - Strikeout and Underlying.
Regards,
Andrew Velitchko
BrainBench MVP for Oracle Developer
http://www.brainbench.com

Find problem with the text search in jdeveloper.

When i press "ctrl + f" sometimes i am unable to edit the data which is already in the text box.
Same case with the line number even. When i press "cntrl + g" the text box with line number is uneditable.
My machine config :
RHEL 4,
Jdeveloper version : 10.1.3.0.4.3673

I've seen this issue too. It appears to be related to top level window focus. Sometimes the modal dialogs for Find and Go to Line number are on top, but without focus. This seems to be some generic Java issue on Linux (I'm using Gnome, unsure about other desktops).
One workaround for find: instead of using Ctrl+F, try using Ctrl+E instead. This invokes incremental search. A lot of people prefer this to regular find anyway.
Brian

A problem with the Bembo font in Pages

I've designed a document using the Bembo font and it keeps substituting "Expert" for "Regular." I've actually removed "Expert" from my font book and yet I'm still having this problem. Any suggestions for how to fix this glitch?

Look for an otf verion of the font or convert your Type 1 postscript to an otf.
Check the actual font name and verify it in Font Book.
Peter

Mr Magoo has problems with the small font print in the "Everything Mac" man

Well thanks to a one year no payments offer by my local Future Shop i purchased the iMac 3.0.6GHz.
However the "Everything Mac" manual and other enclosed printed documents are printed in extremely small fonts.
Is there a download site for a pdf version which may allow me to print or view the instructions in larger print.
Lordy, SteveJobs must have extremely good vision.

If you find a PDF copy such as this http://manuals.makeuseof.com.s3.amazonaws.com/the-mac-manual.pdf - open that in Safari and zoom to your heart's delight.
As well, go to System Preferences/Universal Access and see if any options there help out.
And finally, if you also have the new Magic Mouse, simply hold down on the Control Key on your keyboard and 'scroll' with one finger fore/aft on the mouse top to zoom with ease.
Good luck and any case and enjoy your new Mac.
Just a note....be sure that manual is current with the OS version on your new computer - things have changed in many ways and if you're learning, you should learn in sync, etc.

I have problem with The text size during the last weeks.

My IPad 2 is a little weird. During the last weeks it seems it works ok, and suddenly text size, icons size grow very big and it takes me ages to get my IPad back to its original size. Is this happening to anyone?

Short of something that might be going on with the settings, have you tried a reset of the iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button.
In the event that something wonky is going on with your settings you can try Settings>General>Reset>Reset all settings. No data will be lost but all settings will have to be entered again.

Problem with the text tool

when I try to use the text tool asks me this error
Could not complete your request because something prevented the text engine was initialized
need urgently, thank you

Look in windows event viewer and post the results here.
As a quick fix try deleting the prefs by reading this.
http://forums.adobe.com/thread/375776?tstart=0

Problems with the private key at email signing

Error when running the app: org.bouncycastle.cms.CMSStreamException: Inappropriate key for signature.
I'm trying to sign an email with a smart card using Java, mime type multipart / signed, when I do a debug the code without saving the
message or without sending, there is no error or warning, or exception. But when I save or send the message out, I'm getting errors,
inappropriate key .
When I save the message:
body.writeTo(new FileOutputStream("signed.message"));
Whe I send the message:
Transport.send(body);
The error:
Exception in thread "main" org.bouncycastle.cms.CMSStreamException: key inappropriate for signature.
at org.bouncycastle.cms.CMSSignedDataStreamGenerator$CmsSignedDataOutputStream.close(Unknown Source)
at org.bouncycastle.mail.smime.SMIMESignedGenerator$ContentSigner.write(Unknown Source)
at org.bouncycastle.mail.smime.handlers.PKCS7ContentHandler.writeTo(Unknown Source)
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:869)
at javax.activation.DataHandler.writeTo(DataHandler.java:302)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1383)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:852)
at org.bouncycastle.mail.smime.handlers.multipart_signed.outputBodyPart(Unknown Source)
at org.bouncycastle.mail.smime.handlers.multipart_signed.outputBodyPart(Unknown Source)
at org.bouncycastle.mail.smime.handlers.multipart_signed.writeTo(Unknown Source)
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:869)
at javax.activation.DataHandler.writeTo(DataHandler.java:302)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1383)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1743)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1719)
at javaemail.SignedMultipartEmailTest.main(SignedMultipartEmailTest.java:537)
Caused by: java.security.InvalidKeyException: Supplied key (sun.security.mscapi.RSAPrivateKey) is not a RSAPrivateKey instance
at org.bouncycastle.jce.provider.JDKDigestSignature.engineInitSign(Unknown Source)
at java.security.SignatureSpi.engineInitSign(SignatureSpi.java:86)
at java.security.Signature$Delegate.engineInitSign(Signature.java:1104)
at java.security.Signature.initSign(Signature.java:498)
at org.bouncycastle.cms.CMSSignedDataStreamGenerator$SignerInf.toSignerInfo(Unknown Source)
... 16 more
Java Result: 1
BUILD SUCCESSFUL
In the code:
PrivateKey key = (PrivateKey)keyStore.getKey(aliasNm, null);
gen.addSigner(key, signCert, SMIMESignedGenerator.DIGEST_SHA1, new AttributeTable(signedAttrs), null);
where key is the private key of the alias from signature certificate at smart card of type RSAPrivateKey type, according to the debugger
but according to the javadoc returns Type Key but is forced to type PrivateKey which extends to the other.
This line is like a example which I'm using, is a bouncy castle example, but with generated certificates, I changed to use certificates
from smarct card.
signCert is the certificate associated with key , certificate of SIGNATURE from smartcard.
At the debugger:
In the method keyStore.getKey() I'm using null instead of char[] password because is using the windows certificate store which store the
certificates at the smart card and is getting the PIN with PIN dialogue, and is loading the keystore perfectly and I'm getting the
certificates from smart card.
I tried to use:
PrivateKey key = (PrivateKey)keyStore.getKey(aliasNm, PIN_FROM_SMARTCARD);
And I'm getting the same value when I use null.
The value at the debugger is:
(java.security.PrivateKey) (sun.security.mscapi.RSAPrivateKey) RSAPrivateKey [size=2048 bits, type=Signature,
container=hexadecimal_number](the same hexadecimal number in both cases)
Obviously we can see in the error:
Caused by: java.security.InvalidKeyException: Supplied key (sun.security.mscapi.RSAPrivateKey) is not a RSAPrivateKey instance
And we can see too:
RSAPrivateKey de 2048 bits
at the debugger, in the key value.
I can't understand why I'm getting the error only when the message is saved, or sended.
If the key was inappropriate I would receive an error, or an exception when I'm not sending or saving the message.
These are one, of the last lines of the code that I'm hidding with //
When I save the message:
//body.writeTo(new FileOutputStream("signed.message"));
Whe I send the message:
//Transport.send(body);
If I uncomment one of these lines, I'm receiving the errors, previously written above
Any suggestion?
Than you
Regards

Try to reset the device by pressing hold of the home and power button for 15-20 seconds and letting of when the Apple logo appears.

Problem with the progress line in MS Project

Hi there,
I have a question about the progress line in MS Project.
My boss asked me to see how far we were with the work, so I inserted the column '% Complete' and then the progress line.
Now my boss has a problem with the layout and I don't know how the fix it. The problem is at line 43 and 44, where the progress line indicates that we are behind on that group of tasks. But is it possible for the progress line to not indicate it on lines
43 and 44 but only on lines 45 to 50? So my question is if it's possible to make the progress line go down (vertically) over line 43 and 44 instead of jumping to the back?
It would be much more simple if I could insert lines 43 ad 44 as text but not as a task, so that it just counts as a title of some tasks but nothing more than that. Is that possible in Project?
(Lines 45 to 50 are subtasks for line 44, and 44 is a subtask for 43. So line 43 is the main task.)
Normally there was a picture here but I couldn't upload it because my account is not yet verified... So hopefully you can understand the problem with the text.
If anyone could give my some advice or the solution, that would be great!
Thanks in advance!

Hi Thunderbal66--
Basically your activity 43 is late because the sub tasks are also late. Thus MS Project shows the situation by moving the progress line backward. The progress line is automatically displayed based on your project progress, there is no way to manually change
it unless you update your project.
I think the question is not there. This is more a matter of project governance and transparency: why not showin that a project is late when it is late and taking the appropriate corrective actions?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Problem with plain text trailers in rich text email?

I'm a member of a mail group which adds subscribe and unsubscribe trailers added to the emails. When reading these emails with Mail 2.1.1, text emails appear fine. But sometimes html emails that have the text trailer have problems.
The text trailer (which is within a pre html tag) often has and equal sign "=" and "return" which brings the links on two lines. The placement of the extra characters is random... The html of the problem emails look fine when downloaded as a file and viewed with a browser (and the code is fine too)
I see this problem ONLY from group html emails that have a plain text trailer.
Comments or thoughts?

-

Problems with the text/font in email

Similar Messages

Maybe you are looking for