Problems with the Toshiba Recovery Disk Generator program

Hi,
I have a Satellite Pro U400 laptop running XP SP3 - iyes t's old, but still running with newly added memory and a new battery.
I wanted to make a fresh set of recovery disks so I fired up the Toshiba app. It created the first disk fine. Then it prompted for Disk 2. So I put Disk 2 in. It contemplated for a bit, it said it would now create disk 2. Then, it prompts me again for Disk 2. There's no error message or anything. So, I ejected the disk and tried a different one. Several times. It just can't get past this to create disks 2 and 3.
I downloaded an "update" I found on the Toshiba site, but it didn't change anything.
Any suggestions?
Thanks.

Hello
I think you mixed up something...
The hidden Windows partition (Recovery Environment) has nothing to do with the Toshiba recovery disk or HDD recovery procedure. This is a Windows feature that is on all PCs and notebooks available so my suggestion is you read this good Wikipedia article about this:
http://en.wikipedia.org/wiki/Recovery_Environment
The HDD recovery files are stored on the second partition of the HDD in the folder HDDRecovery. So if you use the HDD recovery function only the first partition will be formatted and you can only use this feature if you have access to the advanced boot menu. If you dont have it you must use the Toshiba recovery disk because the disk formats the whole HDD and restore the factory settings of the notebook (the HDD recovery too but only with the first partition).
You can change the partition size of both partitions but there should be enough free space on both partitions. Otherwise the HDD recovery does maybe not work.
About the Vista partition tool I can prefer this useful article:
http://aps2.toshiba-tro.de/kb0/TSB7101OB0006R01.htm
I hope you understand it better now and if you have more questions please let us know.
Greets

Similar Messages

Re: Does partitionning cause problems with the Toshiba Recovery System ?

I'm french so don't be afraid of mistakes !
I wonder if I can repartition my HDD as I want
First of all, I explain you what I've understood with the FAQ:
If Vista fail to boot, Toshiba Recovery in the hidden partition WinRE ( eisa configuration) offer to repair and use either the DVD we have burn or the directory HDDRecovery in the partition E: to repair.
My question is if I don't have the DVD (or if I lost it) :
Can I repartition my HDD (not the Recovery partition but enlarge the partition C: en reduce the partition E:) without causing problems of recovery ?
In other terms will the Recovery partition at boot update the position of recovery files in E:
And if it works, can I simply copy-paste the HDDRecovery directory from E: to C: and then to E: while I format E:
Thank you for your answers
Juju313

Hello
I think you mixed up something...
The hidden Windows partition (Recovery Environment) has nothing to do with the Toshiba recovery disk or HDD recovery procedure. This is a Windows feature that is on all PCs and notebooks available so my suggestion is you read this good Wikipedia article about this:
http://en.wikipedia.org/wiki/Recovery_Environment
The HDD recovery files are stored on the second partition of the HDD in the folder HDDRecovery. So if you use the HDD recovery function only the first partition will be formatted and you can only use this feature if you have access to the advanced boot menu. If you dont have it you must use the Toshiba recovery disk because the disk formats the whole HDD and restore the factory settings of the notebook (the HDD recovery too but only with the first partition).
You can change the partition size of both partitions but there should be enough free space on both partitions. Otherwise the HDD recovery does maybe not work.
About the Vista partition tool I can prefer this useful article:
http://aps2.toshiba-tro.de/kb0/TSB7101OB0006R01.htm
I hope you understand it better now and if you have more questions please let us know.
Greets

Problems with the summit that auto generate t:panelTab

Hi,
I have a problem with the summit that auto generate <t:panelTab. When I submit with this button the bean PortfolioPageBean doesn�t recover the property contractListItem. However when I submit with <h:commandButton commandButton action="add", the bean recover information. What is the difference between these two types of submits?. This is my core:
<h:form id="menuTag">
<h:inputHidden id="contractListItem"
 value="#{PortfolioPageBean.contractListItem}" />
<h:commandButton action="add" id="buttonTab" value="Add" />
 <t:panelTabbedPane styleClass="tabbedPane"
 activeTabStyleClass="activeTab" inactiveTabStyleClass="inactiveTab"
 disabledTabStyleClass="disabledTab" activeSubStyleClass="activeSub"
 inactiveSubStyleClass="inactiveSub" tabContentStyleClass="tabContent"
 serverSideTabSwitch="true" id="menuTabs">
 <t:panelTab id="tab1" styleClass="" label="Contract Listing">
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab1">
 <jsp:include page="contract-list.jsp" />
 </f:subview>
 </t:panelTab>
 <t:panelTab id="tab2" label="General Policy Details" style="align:center">
 <h:outputText
 value="#{PortfolioPageBean.contractListItem}"></h:outputText>
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab2">
 <jsp:include page="general-policy.jsp" />
 </f:subview>
 </t:panelTab>
 </t:panelTabbedPane>
</h:form>
Thank for your time!!!

Hi,
I have a problem with the summit that auto generate <t:panelTab. When I submit with this button the bean PortfolioPageBean doesn�t recover the property contractListItem. However when I submit with <h:commandButton commandButton action="add", the bean recover information. What is the difference between these two types of submits?. This is my core:
<h:form id="menuTag">
<h:inputHidden id="contractListItem"
 value="#{PortfolioPageBean.contractListItem}" />
<h:commandButton action="add" id="buttonTab" value="Add" />
 <t:panelTabbedPane styleClass="tabbedPane"
 activeTabStyleClass="activeTab" inactiveTabStyleClass="inactiveTab"
 disabledTabStyleClass="disabledTab" activeSubStyleClass="activeSub"
 inactiveSubStyleClass="inactiveSub" tabContentStyleClass="tabContent"
 serverSideTabSwitch="true" id="menuTabs">
 <t:panelTab id="tab1" styleClass="" label="Contract Listing">
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab1">
 <jsp:include page="contract-list.jsp" />
 </f:subview>
 </t:panelTab>
 <t:panelTab id="tab2" label="General Policy Details" style="align:center">
 <h:outputText
 value="#{PortfolioPageBean.contractListItem}"></h:outputText>
 <f:verbatim>
 
 </f:verbatim>
 <f:subview id="subtab2">
 <jsp:include page="general-policy.jsp" />
 </f:subview>
 </t:panelTab>
 </t:panelTabbedPane>
</h:form>
Thank for your time!!!

I have a problem with the sound and voice communication programs amplifier

I have a problem with the sound and voice communication programs amplifier

Define "voice of the device."
Are you referring to the ear speaker or main speaker? Phone calls? Rings/alerts? Music?
What troublshooting steps did you take?

Problem with the selection screen in submit program

Hi Friends,
i am facing the problem wih the selection screen in submit program. in my Module pool program i am using the submit program statement, When i execute the program , The module program display the submit program selections creen.
I have implemented the code same as below.
submit ztest with tknum =p_tknum and return.
Can you pleaes help me how to avoid the submit program selection screen.
Thanks,
Charan

Hi Charan,
You have to give the selection screen values when you submit a job.
Press F1 on submit and you will see more details.
Here is an example from ABAP Documentation.
Program accessed
REPORT report1.
DATA text(10) TYPE c.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
     DATA: text(10)   TYPE c,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Regards,
Jovito.

Getting error and cannot download itunes. says there is a problem with the windows installer package. a program required for the install to be complete could not be run. any ideas?

getting an error downloading itunes 64bit for windows 7. says there is a problem with the windows installer package. a program required for the install to be complete could not be run. any ideas? i uninstalled it last night when it would not open.

Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

Any problems with the recalled hard disk drives, any problems with the recalled hard disk drives

Has anyone had their defective hard drive replaced?
any problems with the Apple service or restarting the machine with a new hard drive?

See this FAQ: http://www.thexlab.com/faqs/freeingspace.html

Problem with HP G62 Recovery Disks

Hello,
I am having a problem with restoring the operating system on an HP G-62 Notebook. When I first purchased the notebook I was unable to make the recovery disks, so I recently ordered some new ones from HP. Because I has installed Ubuntu on the notebook, I wiped it from the hard drive used Wipedrive to delete the old Ubuntu operating system I had installed.
The notebook reads the first disk ok and installs part of windows, but when the screen comes on asking for disk number two it freezes up and never installs anything when you try to move anything on that screen it wont do anything and it wont install the second disk. It just keeps saying 'please wait'.
Thanks, Robert
This question was solved.
View Solution.

Hi, Robert:
I can't help you to get the recovery disks to work, but if you can read all 25 characters of the windows 7 product key on the bottom of your PC, you can make your own windows 7 installation disk to reinstall the operating system.
Here's how:
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Wrong Machine message with genuine Toshiba recovery disk

I have a Sat Pro L300 EZ1004X and ordered a recovery disk from Toshiba after giving them the model number and serial number. When I boot from the disk I get a "Wrong Machine" message with an exit button that just powers off the machine, there is no exit to DOS. Booting from recovery partition by holding down 0 does not work either, just some colors at the top of the screen. The laptop was refurbished at a genuine Toshiba service center. The recovery disks are labelled L300 series. The machine was running fine until attacked by the Alureon virus and now hangs at the Microsoft screen on boot. I want to wipe the disk and start again. Net research indicated I may need a DMI reset utility, but the one I found at the Toshiba site does not list the L300 models. Any ideas would be greatly appreciated.

Satellite Pro L300-EZ1004X
"Wrong Machine" message
You're right, Chris. If the recovery disc is the correct one, the DMI string in the machine needs fixing. Since the utility for that computer is not posted, you need to contact Toshiba. It's 800-457-7777 or..
Locate a Toshiba Service Center
-Jerry

Question / problems with the Toshiba TV 40TL938 (40TL938F)

Hi everybody,
I bought the Toshiba TV 40TL938 french version ( 40TL938F ), in an online store.
I have a few question / problem, and i hope you could help me.
- when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
- when i play MKV vido files via DLNA (with XBMC), there is no subtitles anymore. Whose fault is it ? my TV ? XBMC ? do you how i can fix this ?
- does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938
Thank you very much by advance for your help !
Backslash
French user of a beautiful Full HD 3D 40 inches toshiba LED TV :)

> {quote:title=TomDexter wrote:}{quote}
> > when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
>
> User manual page 76:
> http://www.toshiba-om.net/LCD/PDF/English/TL938-4046-English.pdf
> You will need to check the option: +Subtitle Type+
Hi !
Thank you for your answer,
I saw this but there is no way to change the subtitle setting.
In "subtitle type" the only thing i can do is to swich from "normal" to "deaf and hearing impaired" ("sourd et malentendant" in french).
So i guess i will have to get used to it
Anyway, thank you for your help !
> {quote:title=donhe7 wrote:}{quote}
> BACKSLASH ASKS " does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938?"
>
> Please excuse my ignorance, but what is "DTS"???
>
> donhe7
DTS is an audio format, such as AC3 or mp4. This TV doesn't support DTS, so when i play movie (such as MKV file) with audio in DTS, there is no sound (but the video is ok).

Problems with the MacBook Air disk drive

My brother bought a MacBook air and I am trying to install Microsoft Office on it from my MacBook Pro but every time I try it repeats the same message: “The operation can’t be completed because the original item for “Microsoft Office 2011” can’t be found”. Does anybody know how to get around this?
Thanks!

Since Apple says that some copy protected DVD's will not function with Disk Sharing, you may need to "clone" the DVD, using the MBP, to a flash drive, and use the flash drive to perform the installation of the software.
Another alternative is to download and install the Trial version from the Microsoft Office For Mac website, and then use the activation code provided with the DVD to activate the full version install of the trial.

Problems with the Fixed Optical Disk Drive

I have a Tecra A4, DVD DOES NOT operate, does not read any DVD or CD-ROM and the computer display following error message indicating: Device is not accessible the request could not be performed because of an I/O device error. Any suggestions? lhidalgoa

Since Apple says that some copy protected DVD's will not function with Disk Sharing, you may need to "clone" the DVD, using the MBP, to a flash drive, and use the flash drive to perform the installation of the software.
Another alternative is to download and install the Trial version from the Microsoft Office For Mac website, and then use the activation code provided with the DVD to activate the full version install of the trial.

Installation problems with The Sims 2 (disk space)

Hey, sorry to bug everyone but I have been having so much trouble trying to install The Sims 2. Whenever I try to open the installer it says..."Package Installer requires at least 1 MB of free disk space. Free up some space on your local disk and then re-lauch Package Installer"
I am so confused, I got my macbook about a month ago and it is my first mac. I didn't think I would have to "free up space on my local disk" And if I do how do I go about doing that?
Or am I just screwed? I thought if my macbook wouldn't run this game it may just be very slow because it couldn't keep up with the graphics, I didn't expect it to not even open the installer.
Please help!

I had this same thing happen. Its because you are trying to start the game from the DVD instead of the Harddrive as I recall. Make sure you are clicking on the icon in the Applications folder. It was a long time ago this happened to me and I forget all the details.

How to repair corrupted xp files with the Toshiba recovery dvd pkg

Hello all, my Satellite a105-s4054 has some corrupted xp os files. Please advise on how to repair only these files using the recovery dvd pks included with my sytem. I would rather not have to do a complete format and install. And it is now obvious which of the individual files listed should be replaced to repair the corrupted files.
Is there way to just replace the corrupted files?
Thank you

Satellite A105-S4054
..replace the corrupted files?
If they are system files, this will fix them.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-Jerry

Re: How much does the Toshiba recovery disk would cost?

Thank You very much for your timely and valuable inputs.
i tried the below link
https://backupmedia.toshiba.eu/landing.aspx
and not able to get price in Indain Rupee.
kindly can you(anyone) help me to know,
How much it Cost in Indian Rupee?
Thanks in Advance !

*This page is for EMEA (Europe-Middle East-Africa) only.*
If you need recovery media for Indian notebook model you will not get it there.
For recovery media please contact nearest Toshiba Authorized service provider in your country.

Problems with the Toshiba Recovery Disk Generator program

Similar Messages

Maybe you are looking for