Problems with the Validator
Hi,
I have a
<h:command_hyperlink label="DataList" commandName="showList" actionRef="Bean.showDataListAction"/>
and some late in the Code a <h:form .....> with some text fields using the custom validator. The value will be requaed for this text fields.
The validator should only be invoked after the form submition.
But it will be invoked every time that i click on the link, becouse the fields are empty.
Goes every action from the JSP that have some fields to validate over the Validator?
How can I obviate it?
Thanks
Viktoria Tokaev
Hi Viktoria,
I had that problem too. See what I wrote in following thread:
http://forum.java.sun.com/thread.jsp?forum=427&thread=445506&message=2014319#2014319
Greetings,
Rene
Similar Messages
-
The timesheet creation failed, because of problems with the project I server or with data validation
Hi,
One of my user is facing issue in creating new time sheet,
"The time sheet creation failed, because of problems with the project server or with data validations".
This issue is coming to only few members out of 10000 members.
Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
Many thanks in advance.I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
Ben Howard [MVP] | web |
blog | book -
Is anyone having problems with the w3c validator killing Dreamweaver
CS5.5 on win7 64bit is my system.
If I try to validate a PHP page in live view, most times the validator works fine.
If there is an error, and I click on the line number to find the error location, edit the file and close the validator window, I get a short fat barber's pole in blue and white on the bottom right of my screen, or sometimes a long thin one at the top right.
The following message appears:
>>>>>>>>>
Server not found
The page
"http://localhost (path to page) was not loaded because Dreamweaver could not find the server "localhost". Please make sure that you are connected to the internet and the server name is correct.
>>>>>>>>>
On other occasions, the following message appears after using the validator:
>>>>>>>>>
path to filename The request to the W3C service has timed out. The service or your Internet connection appears to be down.
My Internet connection is fine, and if I click on the w3c button again it validates with no problem.
>>>>>>>>>
When the first message appears, Dreamweaver becomes unstable and hangs, the only solution is to restart the program, after which everything works fine - including the validator, until it finds another error and the whole thing starts over again.
CS5.5 on win7 64bit is my system.
Is anyone else having problems like this with the validator?Try this: http://forums.adobe.com/message/2796075
-
Hello,
I am running an advanced tutorial: http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/issue_track_ui.htm#BGBJCGIC
and I have a problem with item Validation.
Tutorial offers the following:
You must manually create another validation to ensure that the Actual End Date is the same or later then the Start Date.
To add a validation for the Actual End Date:
1.Under Page Processing, Validations, click the Create icon.
2.For Level, accept the default, Item level validation, and click Next.
3.For Item, select Project Details: 50.P3_ACTUAL_END_DATE (Actual End Date) and click Next.
4.For Validation Method:
a.Select PL/SQL and click Next.
b.Accept the default, PL/SQL Expression and click Next.
5.For Sequence and Name:
a.Sequence - Enter 50.
b.Validation Name - Enter P3_END_AFTER_START.
c.Accept the remaining defaults and click Next.
6.For Validation:
a.Validation - Enter:
to_date(:P3_ACTUAL_END_DATE,:APP_DATE_FORMAT) >= to_date
(:P3_START_DATE,:APP_DATE_FORMAT)
b.Error Message - Enter:
Actual End Date must be same or after Start Date.
c.Click Next.
7.For Conditions:
a.Condition Type - Select Value of Item in Expression 1 is NOT NULL
b.Expression 1 - Enter P3_ACTUAL_END_DATE
8.Click Create.
Is there a mistake in explanation? I did it 3 times already, very carefully! I ran the page, entered the date, which is After the Start date, and get the error message: Actual End Date must be same or After Start Date!!
Thank you for your consideration...I got it solved. I don't know if this is documented(or a bug) but what I did was declare an exception and then raise it and put the form_trigger_failure into the exception handler rather than raise form_trigger_failure in the body.
declare
alreadyExists exception;
begin
-- select .....
raise alreadyExists;
exception
when alreadyExists then
message('.....exists');
raise form_trigger_failure
end; -
The enclosed trivial sample illustrates a problem I'm experiencing with validating dates
The date field is initialized when the form opens.
Once the form is open, click the button and a popup appears saying there is a validation problem with the date field. Yet if the date is selected with the date selection widget the appearance is exactly the same, but without the validation problem. What's going on?OK, I've solved this, but I am hoping some kind person can tell me why I solved it.
On the trivial form I enclosed before before, the "click" script used to say
xfa.forms.recalculate(1);
Now I've changed it to
xfa.forms.recalculate (0);
And I no longer see the undesired date validtion errors when I click the button. (See updated enclosure on this post).
The difference is supposed to be that, if the parameter is 0 (or false) then only "pending" calculation scripts are fired, and if 1 (or true) then all calculation scripts are fired. So what does it mean to my DateTime field having unjust validation errors? The DateTime field has no calculation script, only an iitialize script. -
There is a problem with the security certificate of the proxy server. Error code 18 and 38.
Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated! -
Problems with the Spry Content Slider Widget in DW6
Hello there,
I have been wrestling with a problem I'm having with the Spry Content Slider Widget that I hope someone has an answer for.
I have 2 widgets on a page, but the problem I'm having occurs whether there is 1 or 2 on the page.
No matter how many slides I have in the widget, it only shows the first 3. The 2 widgets per page occurs on every html page (9 in total.)
In there a setting in the inline or linked .js code limiting the number of slides to 3?
In addition to these widgets, I also use a DWUser_EasyRotator Slider on the pages, and both the easyRotator and Spry Widgets launch a fancyBox jQuery Gallery. Tho it's a possibility, I don't think the mixing of sliders/js is the problem, as I was having the problem with the Spry Widget showing only the first 3 upon the first insert of the Widget.
Any suggestions on settings I should be aware of, as regards the Widget, would be greatly appreciated… (;On line 66 of your code, you have an extra </head> tag that doesn't belong. Remove that and validate your code again.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.gallerynumber9.com.au%2Findex ---778.html
Nancy O. -
Charm: BP problem with the user
Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
ThomHi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen -
Problem with the cache hit ratio
Hello,
I ma having a problem with the cache hit ratio I am geting. I am sure, 100% sure, that something has got to be wrong with the cache hit ratio I am fetching!
1) I will post the code that I am using to retrieve the cache hit ratio. I've seen about a thousand different equations, all equivalent in the end.
In oracle cache hit ratio seems to be:
cache hits / cache lookups,
where cache hits <=> logica IO - physical reads
cache lookups <=> logical IO
Now some people use the session logical Reads stat, from teh view v$sysstat; others use db block gets + db consistent gets; whatever. At the end of the day its all the same, and this is what i Use:
SELECT (P1.value + P2.value - P3.value) AS CACHE_HITS, (P1.value + P2.value) AS CACHE_LOOKUPS, P4.value AS MAX_BUFFS_SIZEB
FROM v$sysstat P1, v$sysstat P2, v$sysstat P3, V$PARAMETER P4
WHERE
P1.name = 'db block gets' AND
P2.name = 'consistent gets' AND
P3.name = 'physical reads' AND
P4.name = 'sga_max_size'
2) The problem:
The cache hit ratio I am retrieving cannot be correct. In this case i was benchamarking a HUGELY inneficient query, consisting of the Union of 5 Projections over the same source table, and Oracle is configured with a relatively small SGA of 300 MB. They query plan is awful, the database will read the source database table 5 times.
And I can see in the physical data statistics of the source tablespace, that total Bytes read is aproximatly 5 times the size of the text file that I used to bulk load data into the databse.
Some of the relevant stats, wait events:
db file scattered read 1129,93 seconds
Elapsed time: 1311,9 seconds
CPU time: 179,84
SGA max Size: 314572800 Bytes
And total bytes read: 77771964416 B (aproximatly 72 Gga bytes)
the source txt loaded to the database was aprox 16 G
Number of reads was like 4.5 times the source datafile.
I would say this, given the difference between CPU time and Elapsed Time, it is clear that the query spent almost all of its time doin DB file scattered reads. How is it possible that i get the following cache hit ratio:
Cache hit Ratio: 0,92
Cache hits: 109680186
Cache lookups: 119173819
I mean only 8% of that Logical I/O corresponded to physical I/O? It is just not possible.
3) Procedure of taking stats:
Now to retrieve these stats I snapshot the system 2 times. One before the query, one after the query.
But: this is not done in a single session. In total 3 sessions are created. One session two retrieve the stats before the query, one session to run the query, a last session to snapshot after the query.
Could the problem, assuming there is one, be related to this:
"The V$SESSTAT view contains statistics on a per-session basis and is only valid for the session currently connected. When a session disconnects all statistics for the session are updated in V$SYSSTAT. The values for the statistics are cleared until the next session uses them."
What does this paragraph mean. Does it mean that the v$sysstat only shows you the stats of the last session that closed? Or does it mean thtat v$sysstat is increamented with the statistics of each v$sessionstat once a session terminates? If so, then my procedure for gathering those stats should be correct.
Can anyone help me sort out the origin of such a high cache hit ratio, with so much I/O being done?sono99 wrote:
Hi,s
first of, let me start by saying that there were many things in your post that you mentioned that I could no understand. 1. Because i am not an Oracle Expert, i use whatever RDBMS whenever i need to. 2. Because another problem has come up and, right now, i cannot inform myself to be able to comprehend it all.Well, could it be that you need to understand the database you are working on in order to comprehend it? That is why we strongly advise you to read the concepts manual first, you need to understand the architecture that Oracle uses, as well as the basic concepts of how oracle does locking and maintains read consistency. It does these different than other database engines, and some things become nonsense if looked at from the viewpoint of a single user.
>
quote:
It would be useful to see the execution plan jhust in case you have simplified the problem so much that a critical detail is missing.
First, the query code:
2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:>SQL> CREATE TABLE FAVFRIEND
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 2 NOLOGGING TABLESPACE TARGET
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 3 AS
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 4 SELECT ID as USRID, FAVF1 as FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 5 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 6 SELECT ID as USRID, FAVF2 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 7 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 8 SELECT ID as USRID, FAVF3 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 9 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 10 SELECT ID as USRID, FAVF4 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 11 UNION ALL
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 12 SELECT ID as USRID, FAVF5 AS FAVF FROM PROFILE
[2009-10-20 15:11:59,141 INFO]: OUTPUT_GOBLER:> 13 ;
Now, Althought it is clear from the query that the statement is executed with the NOLOGGiNG, i have disabled the logging entirely for the tablespace.There are certain rules about nologging that may not be obvious. Again, this derives from the basic Oracle architecture, and if you use the wrong definitions of things like logging, you will be led down the primrose path to confusion.
>
Futhermore, yes, the RDBMS is a test RDBMS... I have droped the database a few times... And I am constantly deleting an re-inserting data into the source database table named PROFILE.>
I also make sure do check all the datafile statistics, and for this query the amount of RedoLog, Undo "Log", Templife used is negligible, practically zero.Create table is DDL, which has implied commits before and afterwards. There is a lot going on, some of it dependent on the volume of data returned. The Oracle database writer writes things out when it feels like it, there are situations where it might just leave it in memory for a while. With nologging, Oracle may not care that you can't perform recovery if it is interrupted. So you might want to look into statspack or EM to tell you what is going on, the datafile statistics may not be all that informative for this case.
>
Most of the I/O is reading, a few of the I/O is writing.
My idea is not to optimize this query, it is to understand how it performs. Well, have you read the Concepts manual?
I have other implementations to test, namely I having trouble with one of them.
Furthermore, I doubt the query Plan Oracle is using actually involves tablescans (as I I'd like it to do); because in the Wait Events, most of the wait time for this query is spent doing "db file scattered read". And I think this is different from a tablescan.Please look up the definition of [db file scattered read|http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#sthref703].
>
Do you really have to use sessions external to the query session ? Can you query v$mystat joined to v$statname from the session itself.
No, I don't want to that!
I avoid as much as possible having the code I execute being implemented in java. Why do you think java has anything to do with this? In your session, desc v$mystat and v$statname, these are views you can look at.
When i can avoid it I don't query the database directly through JDBC, i use the RDBMS command line client, which is supposed to be very robust. Er, is that sqlplus?
So yes, I only connect to the database with JDBC... in very last session.
Of course, I Could Have put both the gather stats before query and gathers stats after query a single script: the script that would be also runing the query.
But that would cause me a number of problems, namely some of the SQL i build has to be implemented dynamically. And I don't want to be replicating the snapshoting code into every query script I make. This way I have one sql with the snapshoting scripts; and multiple scripts for running each query. I avoid code replication in this manner.Instrumentation is a large subject; dynamic sql generation is something to be avoided if possible. Remember, Oracle is written with the idea that many people are going to be sharing code and the database, so it is optimized in that way. For SQL parsing in particular, if every SQL is different, you get a performance problem called "hard parsing." You can (and generally should, and sometimes can't avoid) use bind variables so that Oracle doesn't need to hard parse every SQL. In fact, this is one of those things that applies to other engines besides Oracle. I would recommend you read Tom Kyte's books, he explains what is going on in detail, including in some places the non-Oracle viewpoint.
>
Furthermore, Since the database is not a production database, it is there so I can do my tests. I don't have to be concerned with what other sessions may be doing to my system. There are only the sessions I control.No, there are sessions Oracle controls. If you are on unix, you can easily see this, but there are ways to see it on Windows, too. In some cases, your own sessions can affect themselves.
>
then what it the array fetch size ? If the array fetch size is large enough the number of block visits would be similar to the number of physical block reads.
I don't know what the arraysize you mention is. i have not touched that parameter. So whatever it is, it's the default.You should find out! You can go to http://tahiti.oracle.com and type array fetch size into the search box. You can also go to http://asktom.oracle.com and do the same thing, with some more interesting detail.
>
By the way, I don't get the query results into my client, the query results are dumped into a target output table.
So, if the arraysize has something to do with the number of rows that Oracle is returning the client in each step... I think it doesn't matter.You may hear this phrase a lot:
"It depends."
>
As for the query plan, If i am not mistaken you can't get get query plans for queries that are: create table as select.What?
JG@TTST> explain plan for create table jjj as select * from product_master;
Explained.
JG@TTST> select count(*) from plan_table;
COUNT(*)
3
I can however commit the create table part and just call for the evalution of the Select part of the query; i believe it should be same.
"Optimizer" "Cost" "Cardinality" "Bytes" "Partition Start" "Partition Stop" "Partition Id" "ACCESS PREDICATES" "FILTER PREDICATES"
"SELECT STATEMENT" "ALL_ROWS" "2563" "586110" "15238860" "" "" "" "" ""
"UNION-ALL" "" "" "" "" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "512" "117222" "3047772" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "513" "117222" "3047772" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "513" "117222" "3047772" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "513" "117222" "3047772" "" "" "" "" ""
"TABLE ACCESS(FULL) SONO99.PROFILE" "" "513" "117222" "3047772" "" "" "" "" ""
This query plan was taken from sql developer, exported to txt, and the PROFILE table here has only 100k tuples.
Right now I am more concerned with testing the MODEL query. Which Oracle doesn't seem to be able any more... but that is a matter for another thread.
Regarding this plan. The Union ALL seems to be more than just a binary Operator... IT seems to be Neray.
The union all on that execution plan seems to be taking as leaf tables 5 99sono.Profile tables, and be making a table scan to them all. So I'd say that the RDBMS should only scan each database block once and not 5 times.
But: It doesn't seem to be so. IT seems like what oracle is doing is scanning completly each the table, and then moving on to next select statement in the UNION ALL. Because given the amount of source table that was read, 5 times greater than the size of the source table. Oracle didn't reuse read blocks.
But this is just my feeling.Your feeling is uninteresting. Telling us what you really hope to accomplish might be more interesting.
Anyway, in terms of consistent gets, how many consistent gets should the RDBMS be doing? 5
One for each table block?It depends.
>
My best regards,
Nuno (99sono xp). -
Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank youDid you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM -
I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago but have repeatedly encountered problems with the programs freezing or not opening properly. It's a Student and Teacher Licensing version so an academic ID is required but I am no longer a student--can I still reinstall it since my academic ID may no longer be valid?
Erin Elzo as long as the serial number has been registered under your account at http://www.adobe.com/ then you should be able to continue to utilize the software. You can find details on how to locate your registered serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
-
I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. -
Hi my name is Lior Sassi from Israel. I bought an iPhone 5 in Amsterdam. Now I have a problem with the button on the iPhone and I still have a guarantee. Where can I fix the problem?
The Warranty is only valid in the Original Country of Purchase.
For Troubleshooting your button issue... See Buttons and Switches here...
http://support.apple.com/kb/TS2802 -
I bought an iPhone in San Francisco and I live in Ecuador, I need a place to claim the world apple warranty in Ecuador, because I have a problem with the screen
There is no "world apple warranty" on iPhones. As paulcb points out, the warranty is only valid in the country of origin. You will have to bring it to the U.S. or send it to someone you know there to get it serviced.
-
Hi .
I was creating the pass the values t in temp tables though s sis package vs2012 .
First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
exec USP_GETMP02333
go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
[Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help meArthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.
Maybe you are looking for
-
Can't enable hyper-v on i5 win 8.1 laptop
Folks, I cannot figure out how to get Hyper-V to run on my new Dell I7352 i5 (5200) 8GB RAM Windows 8.1 touch-screen laptop. Running 'Coreinfo.exe -v' indicates full support for hardware virtualization (HYPERVISOR - Hypervisor is present, VMX * Suppo
-
Internet sharing suddenly not working, PC related problem
Here's the scenario. My Mac-Mini, using 10.7.4, is sharing its Wi-fi connection to my airport extreme base station through a hard-wired ethernet connection with a PC. So the mac is tethered via ethernet cable to the PC, so it can share its wifi conne
-
Interactive froms in web dynpro ABAP
Hi All, Can you please help me in creating a table for input in an interactive form. Thanks & Regards Gaurav Jain
-
Cannot select configuration options on the "select organizer data to synchronize"
I cannot select the option buttons to configure the synch options
-
Using TomCat to view JSP files
I've installed tomcat for the purpose of viewing jsp files. In which folder am i supposed to place the jsp files to view them? Also, what address am i supposed to type in my browser ( http://localhost:8080/myJspFile.jsp ?????? ) My tomcat folder is e