Problems with the X configuration

Hi everyone, please help...
Pacman just remove nvidia to install nvidia-utils, now the nvidia modules is not lauched at the boot of my system or when I do a "startx".
The errors messages tells me that my system can't find the nvidia module and lauch it...
What Can I do??
In my xorg.conf, I have the glx without # and my driver for my video card is "nvidia"
Thanks for the help
Kingboxer

kingboxer wrote:Hi everyone, please help...
Pacman just remove nvidia to install nvidia-utils, now the nvidia modules is not lauched at the boot of my system or when I do a "startx".
The errors messages tells me that my system can't find the nvidia module and lauch it...
What Can I do??
In my xorg.conf, I have the glx without # and my driver for my video card is "nvidia"
Thanks for the help
Kingboxer
After the nvidia-tools install, reinstall nvidia (pacman -S nvidia) and all is well again.

Similar Messages

  • Detected problem with the audio configuration

    Hi guys, can anyone help me with this problem?
    i really have no idea how this error occured. Coz i didnt do anything with the audio configuration.
    I worked well before i updated the iTunes.
    The error is:
    "The iTunes cannot run because it has detected a problem with your audio configuration"
    Thanks...

    Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • May I have Problems with the following configuration

    I'm going to build a production server, so I would like to ask
    you all if I could have some problems with Oracle 8.0.5 on Red
    Hat 6.0 and the Patch on the following hardware:
    MB: Asus P2B-DS with 2 Pentium III 500MHz/512k 512 MB Ram and
    2 IMB Ultrastar-9LZX; 9.1 GB U2WSCSI 10000rpm running with the
    onboard adaptec U2WSCSI controller.
    Does Oracle run better with 2 CPU's? How should I configure the
    server to get the best perfomance? Ist SGA 256 OK or can it be
    greater than that?
    I would greatly appritiate your tips and opinions.
    Thanks in advance
    null

    First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Next, go into the router and make sure your router is properly setup for WEP.  Copy down the WEP "key 1".   You will need to enter WEP "key 1" into your computer, not the WEP password or passphase.
    Next, go into your computer.  Go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use.  Delete your current network (this will delete any old settings).  Reboot computer.  Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".  Reboot computer.  You should connect automatically.
    If you still have trouble, in the computer, temporarily turn off your software firewall, including Windows Firewall, and see if that helps.
    If the above does not fix your problem, download and install the latest driver for your wireless card.
    Some users have reported improved wireless performance by switching from WEP to WPA encryption.
    Message Edited by toomanydonuts on 01-15-2008 01:02 AM

  • Problem with the BPEL configuration in IPM

    Hi,
    I am using ECM 11.1.1.3.
    i have created an application in IPM for invoices and done BPEL configuration.
    Here IPM input agent pick the text file exported by the OFR.( contains xml(supporting content) and tiff file).
    some of the BPEL fiels are mapped with the IPM application and some of the fields are mapped with supporting
    content(i.e line items)
    but here when we test it only one line item will be taken in Bpel payload even if there are 4 line items supporting content.
    can anybody plz help?.....

    Hi,
    I fear that is a bug in the report which is currently being investigated. For now, can you simply create the logical ports and RFC destination manually.
    For this follow the steps outlined in the deployment guide
    -> 3.2.4 Retrieve URL for Logical Port
    -> 3.2.5 Create a Logical Port
    in Chapter 3.2.5. execute these steps on the SCL and not (like mentioned in the documentation) on the SAP system. After doing that the missing steps of report /IWCNT/DEMO_REP_LP_CONFIG should be executed.
    (you might also have to create an HTTP RFC destination that points to the SCL itself)
    I will let you know as soon as we have a fix for /IWCNT/DEMO_REP_LP_CONFIG itself.
    Regards,
    Holger.

  • Problems with the iTunes configuration Assistant

    Hello,
    as far as I know, iTunes using a lot of CPU when used with Windows XP is quite normal and thus nothing one can do something about. But since a few weeks, I have experienced another problem wit iTunes:
    Every time I start iTunes, the start assistant starts as well, asking me whether to import files from my music et cetera. This is not a big problem, as I can cancel the assistant and keep my individual settings. But as it's quite ennerving after all, I would really like to disable that assistant. But how is this possible?
    This bug "survived" a iTunes update (now version 7.6.0.29), but I did not try to uninstall iTunes, as I was not shure whether it is possible or not to keep the library data and ratings etc

    It's fine to do that. Maybe just post in english as well? We all really appreciate your willingness to come and help in another languange, I just think others want to understand as well, since this is a common question!
    Happy Holidays
    btabz

  • I have a problem with the installation/configuration of Creative Suite Design 5.

    All is normal about the installation and the activation, but when I try to launch any aplication (Illustrartor, InDesign) this error appears: "Configuration Error. Error:5"
    Thanks for you help.

    This is the error.
    Thanks.

  • Satellite U300-13U - iTunes has detected a problem with the audio config

    Please can someone help me? I've got a U300-13U laptop and have just installed iTunes on it. However, when I open iTunes I get an error message saying that "iTunes has detected a problem with the audio configuration and may not play properly" That's an understatement - it doesn't play at all!
    I've uninstalled, reinstalled both iTunes and Quicktime but to no avail. I've searched and exhausted the iTunes support boards but got nowhere either. The sound is fine as I can play CDs with no issues at all. The only suggestion that I can get is that there may be a problem with audio device not liking Apple and vice versa.
    Does anyone have ANY idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play her music!!!
    Thanks ever so.

    Hello
    I dont use iTunes so Im not an expert with this player but first of all you should give us some important informations:
    - What OS do you use?
    - Are you using the factory settings (Toshiba recovery disk) or your own Windows version
    - Do you have yellow exclamation marks in device manager?
    Ok, iTunes told you that there is a audio configuration problem so did you try to update the sound driver? If not, you should try it.
    Check the Toshiba website for an update and see what happens. Then post your result:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Greets

  • I up graded to Lion OsX and when I configured my POP account, it says is null and with the same configuration in my Macbook I have no problem at all, what can I do?

    I upgraded my operating system to Lion osx 10.7 and after  I ibnstalles it I coul not receive or send  emails from my POP account, yes from my IMAP accounts,Itried to configure it again with the same configuration I have in my Macbook with Leopard system and it say its null, what can I do?
    Carlos38

    That issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    If clearing the cookies doesn't help then it is possible that the file <i>cookies.sqlite</i> that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete <b>cookies.sqlite-journal</b> and <b>cookies.txt</b>, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • HT1199 cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can anyone help. Cheers Wade Johnson

    Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
    Audio/Video playback may not operate properly.
    Cheers
    Wade Lawrence

    Hello Wade,
    This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Resolution
    QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
    On the Start menu, click Control Panel.
    Follow the steps appropriate for your Windows operating system below.
    Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
    Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
    Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
    Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
    During the download:
    If you choose to run the installer, proceed to the next step.
    If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
    Follow the on-screen instructions to install QuickTime.
    Reopen iTunes.
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371
    Cheers,
    Allen

  • Problem with the new server UCS C220 for set IP to CIMC

    Hi
    We’ve a problem with the new server UCS C220.
    We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
    When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
    Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
    Note. The dedicated management NIC does not link, the other two ports do make link.
    What do you suggest to put an IP to CIMC and start installing our applications?
    regards

    You may have noticed that there is no DVD rom on the c220. What you need to do is:
    Login into the CIMC from your browser
    Luanch the KVM
    Insert the VMware DVD in your machines drive
    On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
    After the VMware OS installs press F2 to enter IP.
    Browse to the VMware ip to download the Vsphere client
    Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
    You can now upload OVA templates or manually create virtua machine from this enviroment.
    Hope this help

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud.  I have verified the settings.  I can access my iCloud account online but can't send or receive e-mail via the mail account.

    Text limits to the "Question" link prevents a full explanation:
    This is a long-time problem.  I have tried to resolve it with Apple but their "Customer Support" is merely a name.
    I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network.  Verify the settings for 'Apple Email' and try again.
    "The server returned the error:  The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
    Well, I have verified the setting and tried again and again and …
    Well, you get the idea …

    JungleTaxi Cabbie wrote:
    Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
    Enter your Incoming Mail Server, User Name, and Password using the following settings:
    Incoming Mail Server: mail.me.com
    User Name: Your iCloud email address (excluding @me.com)
    Password: Your password
    Last Modified: Jun 27, 2013
    Maybe you should test these things before calling people out, because these settings do function perfectly well.
    iCloud is not supported on Snow Leopard or lower, why bother to mention it?
    The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
    The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
    JungleTaxi Cabbie wrote:
    Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
    I never said that there was, perhaps you imagined it.

  • There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

    Hello,
    I have an issue with connecting client SB1H on Windows, the scenario is as follows:
    1.- Server:
         Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
         NDB and Server are review 69 SP06
    2.- Client:
         Windows 8 Pro Virtual Machine on Microsoft Hyper-V
         SB1H PL 11 version 32bits    
         SAP HANA Studio version 1.0.60
    When I run SB1H the following message appears:
    There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
    Any idea what could be the solution?

    Hi,
    Please check SAP notes:
       1993392 - Server components setup wizard: New default values for certificates and single sign-on option
    1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
    Thanks & Regards,
    Nagarajan

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

Maybe you are looking for