Problems with the Xserver Bus error

I think this problem started when I updated to 10.4.10, but I'm not entirely sure.
All of the sudden, I lost the Windows Login, the first problem I found was that the "crashreport" couldn't write on file and exited with signal 1 and 10.
Following up on the system.log the application crashing was Spotlight damon.
I remove it from the boot process and now it's not crashing (because is not running )
But I still cannot login, when I restart the server, the screen stays on the part where the "bar" estimate the time to boot, although some of the services are up.
Like LDAP, AFP, DHCP, etc.
I cannot connect with the "Server Admin" remotely, although the "Workgroup Mannager" DOES connect.
I CAN login ssh, but if I try any privileged commands, like "systemsetup", "networksetup", "softwareupdate", I get "Bus error" and there's nothing I can do.
From the system.log I get
Jul 10 21:20:34 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 10 21:20:34 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 10 21:20:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 10 21:20:35 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 10 21:21:05 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
"ps xl" gives me this:
UID PID PPID CPU PRI NI VSZ RSS WCHAN STAT TT TIME COMMAND
0 1 0 0 32 -1 28348 212 - S<s ?? 0:47.20 /sbin/launchd
0 27 1 0 63 0 27264 108 - Ss ?? 0:00.00 /sbin/dynamic_pager -F /private/var/vm/swapfil
0 31 1 0 31 0 28216 940 - Ss ?? 0:01.20 kextd
0 35 1 0 31 0 27752 568 - Ss ?? 0:05.62 /usr/sbin/kdcmond -n -a
0 36 1 0 31 0 27844 400 - Ss ?? 0:00.03 /usr/sbin/KernelEventAgent
0 37 1 0 31 0 28612 984 - Ss ?? 0:04.22 /usr/sbin/mDNSResponder -launchdaemon
0 38 1 0 31 0 27592 412 - Ss ?? 0:06.12 /usr/sbin/netinfod -s local
0 39 1 0 31 0 34464 2380 - Ss ?? 0:11.64 /usr/sbin/PasswordService -n
0 41 1 0 31 0 27772 620 - Ss ?? 0:00.02 vpnd -x -i com.apple.ppp.pptp
0 43 1 0 31 0 27284 236 - Ss ?? 0:22.46 /usr/sbin/syslogd
0 45 1 0 31 0 28580 920 - Ss ?? 0:00.26 /usr/sbin/kadmind -passwordserver -nofork
0 46 1 0 31 0 86292 3112 - Ss ?? 0:17.80 /usr/sbin/named -f
0 49 1 0 31 0 118008 3584 - Ss ?? 1:18.70 /usr/libexec/slapd -d 0 -h ldap:/// ldapi://%2
0 50 1 0 31 0 27348 460 - Ss ?? 0:01.59 master
0 52 1 0 31 0 28872 756 - Ss ?? 0:00.25 /usr/sbin/coreaudiod
0 53 1 0 31 0 27780 820 - Ss ?? 0:46.80 /usr/sbin/diskarbitrationd
0 54 1 0 31 0 28340 520 - Ss ?? 0:00.58 /usr/sbin/memberd -x
0 55 1 0 31 0 30368 2856 - Ss ?? 0:22.12 /usr/sbin/securityd
0 57 1 0 31 0 27864 308 - Ss ?? 0:33.99 /usr/sbin/notifyd
0 63 1 0 31 0 27672 520 - Ss ?? 0:06.20 /usr/sbin/distnoted
0 64 1 0 31 0 34644 3616 - Ss ?? 0:10.24 /usr/sbin/DirectoryService
0 66 1 0 31 0 27248 168 - Ss ?? 0:58.58 /usr/sbin/update
0 81 1 0 31 0 29896 1052 - Ss ?? 0:28.71 /System/Library/CoreServices/coreservicesd
0 130 1 0 31 0 27768 212 - Ss ?? 1:41.87 /usr/libexec/crashreporterd
0 177 1 0 31 0 28992 1016 - Ss ?? 0:01.44 /usr/sbin/serialnumberd
0 179 1 0 31 0 28512 1264 - Ss ?? 0:01.66 /usr/sbin/cupsd -L
0 180 1 0 31 0 29308 128 - Ss ?? 0:00.00 nfsiod -n 4
0 191 1 0 31 0 29080 160 - Ss ?? 0:00.00 /usr/sbin/AppleFileServer
0 192 191 0 31 0 81588 9656 - S ?? 2:54.72 /usr/sbin/AppleFileServer
0 193 1 0 31 0 27812 504 - S ?? 0:00.04 /bin/sh ./bin/mysqld_safe --datadir=/usr/local
0 199 1 0 31 0 30224 528 - Ss ?? 0:00.41 /usr/sbin/smbd -D
0 202 199 0 31 0 30224 208 - S ?? 0:00.00 /usr/sbin/smbd -D
0 204 1 0 31 0 27308 128 - Ss ?? 0:00.00 rpc.lockd -w
0 207 1 0 31 0 29716 904 - Ss ?? 0:00.06 /usr/sbin/automount -f -m /Network -nsl -mnt /
0 209 1 0 31 0 28456 688 - Ss ?? 0:11.09 /usr/sbin/nmbd -D
0 210 209 0 31 0 28440 172 - S ?? 0:00.01 /usr/sbin/nmbd -D
0 213 1 0 31 0 29420 868 - Ss ?? 0:00.06 /usr/sbin/automount -f -m /automount/Servers -
0 216 35 0 31 0 28848 1592 - S ?? 0:12.35 /usr/sbin/krb5kdc -n -a
0 219 1 0 31 0 27508 316 - Ss ?? 0:08.14 ntpd -f /var/run/ntp.drift -p /var/run/ntpd.pi
0 348 1 0 31 0 30936 772 - Ss ?? 0:00.46 slpd -f /etc/slpsa.conf
0 402 1 0 31 0 27328 76 - Ss ?? 0:00.00 /usr/sbin/webperfcache
0 19558 1 0 31 0 30292 1064 - S ?? 0:00.36 /usr/sbin/sshd -i
0 23027 1 0 31 0 27844 904 - Ss ?? 0:00.05 /usr/libexec/bootpd -q
0 23341 1 0 32 -1 28352 232 - S< ?? 0:00.00 /sbin/launchd
0 26365 1 0 31 0 29928 1508 - Ss ?? 0:31.98 /usr/sbin/configd
0 26375 1 0 31 0 30268 1056 - Ss ?? 0:06.97 /usr/sbin/lookupd
0 19562 19558 0 31 0 27812 864 - Ss p0 0:00.25 -sh
0 23342 19562 0 31 0 27288 396 - R+ p0 0:00.01 ps xl
G5   Mac OS X (10.4.9)   2 512Gb Mirror Disks

OK, I put the things back before my changes.
I run the "privilages", install the Combo package, but everithing stays the same.
Here's the system.log
Jul 11 16:31:30 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jul 11 16:31:27 localhost mDNSResponder-108.5 (May 9 2007 16: 57:18)[37]: starting
Jul 11 16:31:30 localhost kernel[0]: vmpagebootstrap: 124261 free pages
Jul 11 16:31:27 localhost memberd[50]: memberd starting up
Jul 11 16:31:30 localhost kernel[0]: migtable_maxdispl = 70
Jul 11 16:31:28 localhost named[44]: starting BIND 9.3.4 -f
Jul 11 16:31:31 localhost kernel[0]: 91 prelinked modules
Jul 11 16:31:29 localhost lookupd[54]: lookupd (version 369.5) starting - Wed Jul 11 16:31:29 2007
Jul 11 16:31:31 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jul 11 16:31:31 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jul 11 16:31:31 localhost kernel[0]: using 1310 buffer headers and 1310 cluster IO buffer headers
Jul 11 16:31:31 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Jul 11 16:31:31 localhost kernel[0]: DART enabled
Jul 11 16:31:31 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe42198e; max speed s800.
Jul 11 16:31:31 localhost kernel[0]: Security auditing service present
Jul 11 16:31:31 localhost kernel[0]: BSM auditing present
Jul 11 16:31:31 localhost kernel[0]: disabled
Jul 11 16:31:31 localhost kernel[0]: rooting via boot-uuid from /chosen: 1FFA9A97-D6DE-3E6F-8EAD-9C7D29C054DB
Jul 11 16:31:31 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jul 11 16:31:31 localhost kernel[0]: AppleSMU -- shutdown cause = 2
Jul 11 16:31:31 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3500630AS Media/IOApplePartitionScheme/AppleRAID_OfflineV2_Untitled2@3/AppleRAIDMember/AppleRAIDMirrorSet/IMER Server Disk@0
Jul 11 16:31:31 localhost kernel[0]: BSD root: disk2, major 14, minor 8
Jul 11 16:31:31 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x69, SDB vers = 0x01,
Jul 11 16:31:31 localhost kernel[0]: Jettisoning kernel linker.
Jul 11 16:31:31 localhost kernel[0]: Resetting IOCatalogue.
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 1
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: Matching service count = 3
Jul 11 16:31:31 localhost kernel[0]: NVDANV40HAL loaded and registered.
Jul 11 16:31:31 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Jul 11 16:31:31 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Jul 11 16:31:31 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Jul 11 16:31:31 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Jul 11 16:31:31 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Jul 11 16:31:31 localhost named[44]: command channel listening on 127.0.0.1#54
Jul 11 16:31:33 localhost diskarbitrationd[49]: disk2 hfs 1FFA9A97-D6DE-3E6F-8EAD-9C7D29C054DB IMER Server Disk /
Jul 11 16:31:33 localhost DirectoryService[58]: Launched version 2.1 (v353.6)
Jul 11 16:31:34 localhost launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:31:34 localhost launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:31:34 localhost launchd: com.apple.servermgrd: 9 more failures without living at least 60 seconds will cause job removal
Jul 11 16:31:34 localhost launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:31:35 localhost kernel[0]: BCM5701Enet: Ethernet address 00:16:cb:3a:f0:88
Jul 11 16:31:35 localhost launchd: Server 351b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[54]: exited abnormally: Hangup
Jul 11 16:31:35 localhost kernel[0]: BCM5701Enet: Ethernet address 00:16:cb:3a:f0:89
Jul 11 16:31:36 localhost lookupd[73]: lookupd (version 369.5) starting - Wed Jul 11 16:31:36 2007
Jul 11 16:31:36 localhost mDNSResponder: Adding browse domain local.
Jul 11 16:31:37 imerserver configd[47]: setting hostname to "imerserver.intranet.imeronline.com"
Jul 11 16:31:40 imerserver kernel[0]: NVDA,Display-B: vram [98020000:08000000]
Jul 11 16:31:40 imerserver kernel[0]: NVDA,Display-A: vram [00000000:01000000]
Jul 11 16:31:40 imerserver kernel[0]: AppleBCM5701Ethernet - en0 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Jul 11 16:31:40 imerserver configd[47]: AppleTalk startup
Jul 11 16:31:42 imerserver configd[47]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jul 11 16:31:42 imerserver configd[47]: posting notification com.apple.system.config.network_change
Jul 11 16:31:42 imerserver lookupd[81]: lookupd (version 369.5) starting - Wed Jul 11 16:31:42 2007
Jul 11 16:31:44 imerserver configd[47]: AppleTalk startup complete
Jul 11 16:31:48 imerserver DirectoryService[58]: LDAPv3: [127.0.0.1] Updated Security Policies from Directory.
Jul 11 16:31:52 imerserver kernel[0]: nmbd[207] uses send/recv on a pipe
Jul 11 16:31:52 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:31:52 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:31:52 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:31:52 imerserver launchd: com.apple.servermgrd: 8 more failures without living at least 60 seconds will cause job removal
Jul 11 16:31:52 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:31:53 imerserver /usr/sbin/serialnumberd[179]: serialnumberd: Firewall rule #1 added to allow port 626.
Jul 11 16:31:55 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:55 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:55 imerserver ntpdate[94]: getnetnum: "time.apple.com" invalid host number, line ignored
Jul 11 16:31:55 imerserver ntpdate[94]: no servers can be used, exiting
Jul 11 16:31:55 imerserver configd[47]: target=enable-network: disabled
Jul 11 16:31:56 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:56 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:56 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:56 imerserver automount[192]: Failed request for Finder notification; result = -1.
Jul 11 16:31:57 imerserver ntpd_initres[258]: couldn't resolve `time.apple.com', giving up on it
Jul 11 16:32:01 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:32:01 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:32:02 imerserver netinfod local[38]: cannot lookup child
Jul 11 16:32:02 imerserver netinfod local[38]: cannot lookup child
Jul 11 16:32:02 imerserver netinfod local[38]: cannot lookup child
Jul 11 16:32:02 imerserver netinfod local[38]: cannot lookup child
Jul 11 16:32:03 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:03 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:03 imerserver launchd: com.apple.servermgrd: 7 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:03 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:05 imerserver mDNSResponder: Update kerberos.udp.IMERSERVER.INTRANET.IMERONLINE.COM. refused
Jul 11 16:32:05 imerserver mDNSResponder: Registration of record kerberos.udp.IMERSERVER.INTRANET.IMERONLINE.COM. type 33 failed with error -65553
Jul 11 16:32:05 imerserver mDNSResponder: ERROR: hndlLookupSOA - recursed to root label of _kerberos.imerserver. without finding SOA
Jul 11 16:32:05 imerserver mDNSResponder: RecordRegistrationCallback: error -65537
Jul 11 16:32:05 imerserver mDNSResponder: Update kerberos.tcp.IMERSERVER.INTRANET.IMERONLINE.COM. refused
Jul 11 16:32:05 imerserver mDNSResponder: Registration of record kerberos.tcp.IMERSERVER.INTRANET.IMERONLINE.COM. type 33 failed with error -65553
Jul 11 16:32:13 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:13 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:13 imerserver launchd: com.apple.servermgrd: 6 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:13 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:24 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:24 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:24 imerserver launchd: com.apple.servermgrd: 5 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:24 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:31 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:32:31 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:32:31 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:32:32 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:32:34 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:34 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:34 imerserver launchd: com.apple.servermgrd: 4 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:34 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:44 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:44 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:44 imerserver launchd: com.apple.servermgrd: 3 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:44 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:32:55 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:32:55 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:32:55 imerserver launchd: com.apple.servermgrd: 2 more failures without living at least 60 seconds will cause job removal
Jul 11 16:32:55 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:33:02 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:02 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:02 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:02 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:03 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:33:05 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:33:05 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:33:05 imerserver launchd: com.apple.servermgrd: 1 more failure without living at least 60 seconds will cause job removal
Jul 11 16:33:05 imerserver launchd: com.apple.servermgrd: will restart in 10 seconds
Jul 11 16:33:15 imerserver launchd: com.apple.servermgrd: exited abnormally: Bus error
Jul 11 16:33:15 imerserver launchd: com.apple.servermgrd: respawning too quickly! throttling
Jul 11 16:33:15 imerserver launchd: com.apple.servermgrd: too many failures in succession
Jul 11 16:33:33 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:33 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:33 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:33 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:33:34 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:34:04 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:04 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:04 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:04 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:05 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:34:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:35 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:34:36 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:35:06 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:06 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:06 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:06 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:07 imerserver launchd: getty repeating too quickly on port /dev/console, sleeping
Jul 11 16:35:37 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:37 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:37 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jul 11 16:35:37 imerserver /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started

Similar Messages

  • 'A problem with the cooling system' error message on Satellite A660

    Hi all,
    Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
    The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
    The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
    As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
    I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
    Thanks

    In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
    I really dont know why this happen on your notebook and dont think there is anything you can do about it.
    I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

  • Cannot open Word File because "there are problems with the contents"

    Hi Everyone,
    I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2.  Please help as I need this doc for work meeting this morning.  Nothing special about this doc but links were copied into it???  However I do that all the time.  I have never had this happen before.  I am on a 2010 machine.  I just ran a disk permissions repaired and emptied the trash but still no dice.  I had several other word docs up as well when I got up this morning but they are all fine.  I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
    Thank you,
    sb

    Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor?  Not sure what happened here but hope it doesn't happen again?

  • I can not upgrade to quicktime 7.7.3 for windows vista.  Error message says there is a problem with the program installer.  Any clue as to how to get around this.

    I can not download quicktime 7.7.3 for windows vista.  The error message says that there is a problem with the windows installer.  Any clues?

    The error message says that there is a problem with the windows installer.
    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again.  The server returned the error: Mail was unable to log in

    I can send but cannot recieve email
    This is the messege I am gewtting:
    There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
    The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
    The server returned the error: Service temporarily unavailable

    Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

  • Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

    I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
    error, Location: 2'
    When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
    were illegible, but no other weirdness was observed.
    I have microsoft 2008 installed on my Mac OS X version 10.6.8.
    I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
    I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

    Hi,
    This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
    Please use the "Fix it" tool in the following KB article to resolve the problem. See:
    http://support.microsoft.com/kb/2528942
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • There is a problem with the security certificate of the proxy server. Error code 18 and 38.

    Hi All,
    After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
    Exchange 2013 on a remote location with a CA-certificate.
    Outlook 2010 and 2013 on different locations, locally installed and on RDS.
    When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
    name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
    After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
    site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
    certificate is invalid or does not match the name of the site."
    Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
    - restarting mailserver and AD;
    - restarting switches;
    - restarting routers;
    - restarting RDS, AD and all other servers;
    - bypassed proxyserver for RDS;
    - created a new profile;
    - checked recently installed updates;
    - checked certificate on mailserver;
    - checked RDS on a different location, working fine.
    Nothing helped, what can I do next? Please advice.
    Regards.

    Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
    The first message can be suppressed by adding this to the Exchange config:
    set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
    set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
    Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
    this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
    Not completely where I want to be, any help regarding the second alert is greatly appreciated!

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error message in time machine: "There was a problem with the user name or the password of the network

    I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
    "The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
    Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
    I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
    Best regards,
    John

    I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
    "The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
    Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
    I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
    Best regards,
    John

  • While installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

    while installing adobe creative cloud , getting the following error msg " There seems to be a problem with the download process. Error code:201"

    Creative Cloud Help / Error downloading Creative Cloud applications
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  • ITunes won't upgrade to10.5. Error message "There is a problem with the Windows installer package. Contact the package vendor". I need help.

    iTunes won't upgrade to10.5. I'm on 10.1.17.
    When installing 10.5 it terminates with an error message "There is a problem with the Windows  installer package. Contact the package vendor".
    It does not provide an error code or details/description to further troubleshoot. As a result I can't upgrade my Apple devices to leverage the cloud.
    Any smarts out there who could help?
    Using PC Win-7 w/IE 7 (should that matter)
    Thanks much

    I know there's a million threads like this, but I thought I'd record my experience.  I, too, was having the original poster's error when I tried to update iTunes on Windows XP.  I think I was stuck on 10. 
    I solved it by un-installing iTunes and every other Apple app.  I discovered that Apple Software Update would not un-install as its MSI file could not be found.  I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs.  Google "kb290301" for a Microsoft page that includes a download link for it.  After that, I was able to install a fresh copy of iTunes 10.5.2.
    I'm not sure why this app's folder and MSI were missing from my computer.  I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

  • Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

    I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

    There are so many different error and problems peopl are having.
    This is a link to mine
    https://discussions.apple.com/thread/3467825
    I think it has to be something on Apples end.
    Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
    hope this settles you a bit

  • HT1926 can't install quicktime or itunes on windows 7 get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run

    please help. Can't install quictime player or itunes on windows 7. Get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run. Have followed all the steps suggested and still no luck.

    thank you for trying to help. I do not have apple software update on my computer. I have tried to install several programs so i could install it but every installation will not finish and rolls back and says no changes were made to my computer so i can't install the update. I even tried to force install as administrator but nothing works. Any help would be greatly appreciated. I have windows 7 64 bit.

  • WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

    My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft.  Now I cannot print at all.  I get an error that says,  "windows cannot print due to a problem with the current printer set up".  I have tried reinstalling and a ton of other solutions to no avail.  Can someone PLEASE Help!

    Hello there, @jesseangelique ,
    Welcome to the Community!
    I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
    Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
    This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Also, let me know which Officejet 8500 Model you have:
     HP Officejet Pro 8500 All-in-One Printer - A909a
     HP Officejet Pro 8500 All-in-One Printer - A909b
     HP Officejet Pro 8500 Premier All-in-One Printer - A909n
     HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
    Hope to hear from you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

    I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

    Zap the PRAM and Reset the SMC, then try again.

Maybe you are looking for

  • ICal with iCloud syncing - how to back up

    Like many others, I have had problems with multiple entries on iCal. In my case, i probably stuffed up trying to fix it. I ended up with duplicate calendar items before I switched off mobile me. I also updated iPad and iPhone 4 with OS5 thinking i co

  • EJB 3.0 - problem reading request parameters

    I'm looking at Spring and TopLink integration and deploying with the EJB 3.0 version. I ran into problems when trying to retrieve a parameter from a request. Since I could not see anything wrong, I deployed with Tomcat and the code executed correctly

  • Keynote 6.0.1: How To Set Rulers?

    Yo, Keynote fans. Since upgrading to Keynote 6.0.1 (on Mavericks), the new RULERS functionality is stumping me. How do I set (or re-set) the 0/ZERO values of the horizontal & vertical rulers to appear at the middle of each slide, and not in the (defa

  • IPhoto or iMovie for imports

    I import my movies off my Canon sx200is via a SDHC reader. When I plug the reader in it opens iPhoto and tries to import photos and movies alike. This works, but i wondered if there is an advantage to importing the movies in iMovie instead, like if I

  • DHCP with Cisco ap 1300

    hi friends, i want to use two dhcp pool with Cisco ap 1300 and each pool ip is associated with an ssid and a vlan. is'it possible to do this configuration with Cisco ap 1300 ??? urgent thanks