Problems with Tick Configuration on the x-axis in an XY graph

I have set up an XY graph in LabView 2012. The plot area is 1000x750. The x range min is -15. x range max is 15. y range min is -20. y range max is 20. The x and y range increments are 1. The x and y range minor increments are 0.2. The x range start is -14.
When I run the vi the graph comes up in the proper size. The minor grid lines for both the x and y ranges are there at every 0.2 units. The major grid lines are correct for the y scale at every 1 unit. The x scale has a major grid lines at -14 and 14, but in between the major grid lines are at -12, -10, -8, -6 ,-4, -2, 0, 2, 4, 6, 8, 10, and 12. This is incorrect. I expect to see them for every 1 unit as they are on the y scale.
I have change the x range start to -15 keeping all other properties the same. When I do this the major grid lines on the x scale are at -13, -11, -9, -7, -5, -3, -1, 1, 3, 5, 7, 9, 11, 13. Again every 2 units.
I have tried changing the width of the graph along with many of the other properties. Nothing has worked.
Why is this happening? Why does the y scale set up properly but the x scale does not?
I have attached a screenshot of the property node.
Any help is appreciated.
Regards-
john
John O'C
Staff Test Systems Engineer
Woodward, Inc.
Skokie, Illinois, USA
"Life is not a journey to the grave with the intention of arriving safely
in a pretty and well preserved body, but rather to skid in broadside,
thoroughly used up, totally worn out, and loudly proclaiming...
Wow...What a Ride!"
Attachments:
Plot_grid_config.jpg ‏39 KB

Two things to try:
Use a smaller font for the X-axis.
Change the display format.
johnoc wrote:
I tried expanding the width of the graph. Even to the point that it was the same width as it was tall.
A vertical axis needs much less space for a tick than a horizontal axis, so that's expected. We really need to see a simplified version of your actual VI (delete everything except the graph and the property nodes).
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Problems with jdbc configuration  in the config.cfg file

    Hi to all,
    I need to change my oracle database ucm user from idc_orcl to idc_oracle for example but i dont know how to generate the encrypted password of the user in the config.cfg file
    if I let the configuration like below (plain text password and JdbcPassword commnetend) it works.
    But it is not an accepted solution for me, leaving the password in plain text.
    +#Database Variables+
    JdbcDriver=oracle.jdbc.OracleDriver
    JdbcConnectionString=jdbc:oracle:thin:@localhost:1521:ucm
    JdbcUser=idc_oracle
    JdbcPassword=idc_oracle
    +#JdbcPasswordEncoding=Intradoc+
    +#DatabasePreserveCase=1+
    Is there any doc or example related.
    Thanks in advance
    Soni

    Resolved using the following link
    http://www.docs.hvacpartners.com/idc/help/troubleshooting/wwhelp/wwhimpl/common/html/wwhelp.htm?context=troubleshooting&file=page_05_12.htm
    Hope it helps someone in the future!

  • Chart - problem with realize one of the function under CR XI

    Post Author: mrowa
    CA Forum: Charts and Graphs
    Hello,
    I have
    problem with realize one of the function under CR XI. I would be persuade if
    any of us would like to help me.
    1)   
    1) From
    database (basically from one table), I take data to make report. Each of record
    have appropriate fields:
    dteData
    intYear
    intMonth
    intDate
    2)   
    2) I
    want to realized comparison data from two or more periods of time on one chart
    and in one table. For easily explanation I will describe problem on two
    periods.For instance, user want to display and compare
    on chart date (type monthly -sum data of each month) from 2007.02 u2013 2007.05
    with date from 2006.03 u2013 2006.06. So we compare month 2007.02 with 2006.03;
    2007.03 with 2006.04; 2007.04 with 2006.05; 2007.05 with 2006.06
    On char I would like to display bars with comparison
    of months.
    Problem is that I donu2019t know how to write
    something similar. I can use one period without any problems, but two and mores
    I canu2019t realized.
    Detail description:
    I passed
    two parameters two report:
    {?from}, {?to} u2013for first period
    {?offset}, it means {?from}+{?offset},
    {?to}+{?offset}  - for second period
    On axis Y I have Sum(intDate);On
    X (year + month). But on each value x( example 20007.02) I need to have
    two values (bars). Value for standard period and offset.
    For example for x=2007.02, I need
    two bars one equal 2007.02 and second with offset u2013 2006.03
    Movement to next value (bar) is
    persuade by fields {data.rok}&{data.month} first or second period. This is
    combination of two elements year&month defined under Formula. Problem
    persist in that both period has different year.month and here problem starts once
    again. I donu2019t know how to solve it. I have found out one solution but it
    limits user only for two periods (I want to compare more).
    My idea for compare only two
    periods:
    I make one query in CR for one
    period and second query for second period.
    Firs query:
    "SELECT 
           year ,
          month
    Second query
    "SELECT 
           year + FLOOR({month + offset} % 13),
          {month + offset} % 13
    Then in CR I connect two periods and
    make u201Ctableu201D (results of queries) with JOIN on fields year and month.
    This solution is not functional,
    because I need to make reports for days and hours as well. In this solution I
    canu2019t use (%31), because not all months has 31 days.
    I use CR in WEB app made in Visual
    Studio 2005. Maybe from aspx we can manipulate with date to get exact solution,
    and solve problem with SELECT.
    Hope my description clearly
    describe problem and someone will be able to help me. I would be thankful.

    I have had similar problem before.
    Because I had too many data, the legend would not display all the data. Also the chart would not display all the data. But I was able to find a work around.
    In your case, Right click on the Legend text and click on Format Legend Entry.
    Change the font of the legend to 4 (which is the minimum). This may work.
    If you are also having problem with data labels, you could change the font size of the data labels.
    Hope this helps.
    Thank you.

  • Problem With Cutom Configuration with Object Type

    Dear Guru's
    I am working WebUI, I am facing a problem with Custom Configuration.
    1. The initial requirement to control the visibility for a dropdown event in ERP Quotation.
    2. To this i copied the default configuration to custom configuration with custom Object type and Subtype.
           CONFIG KEY: ZPJQTN
           OBJECT TYPE: ZOTYP_CONFIG
           OBJECT SUB TYPE:  ZSTYPE_CONFIG1
    3. I have created customm fields in enhancement.
    4. Now i chosen my new configuration (ZPJQTN,ZOTYP_CONFIG,ZSTYP_CONFIG1), when i click Show available fields, the custom fields are not showing. Instead the created fields are available at other configuration.
    5. I am able to control the visibility for the standard available fields.But i am not getting the custom created fields
    (Note:  I have created the Object type and Object sub type as follows: SPRO->CRM->UI Framework->Define Object Types
    Object type: ZOTYP_CONFIG Callback class: ZCL_CONFIG_CALLBACK
    Redifned the method: IF_BSP_DLC_OBJ_TYPE_CALLBACK~GET_OBJECT_SUB_TYPES
    Coded as below:
      data: lv_subtype type bsp_dlc_object_sub_type.
      lv_subtype = 'ZSTYP_CONFIG1'.
      append lv_subtype to result.
      lv_subtype = 'ZSTYP_CONFIG2'.
      APPEND lv_subtype to result.
    Now Please suggest me how to achieve this.
    Also please let me know, whether i am following the correct procedure for controlling the visibility.
    Thanks in Advance,
    S.Meganadhan.

    Hi Harshit,
    I added custom fields using AET only.
    I am able to see the field got added in the structure. I am able to access GET and SET methods of the field.
    But the problem is, it is not getting saved. Am i missed any configuration step?
    Please suggest me.
    Thanks in advance,
    Regards,
    S.Meganadhan.

  • Problem with InDesign CC redrawing the screen too slow while using Zoom tool

    Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

    Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
    The lasso tool should then work normally.

  • Error -43  when try playback on win7 64bits over the network QT that recide MacPro  osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

    error -43  when try playback on win7 64bits over the network QT that recide MacPro  osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT  nfs sharing

    Never mind, I already found the solution myself.
    What I did wrong was:
    - not copying the master image to the nbi folder
    - selecting the netinstall-restore.dmg image as source to copy to my HD.
    The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
    With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
    In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
    Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
    http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
    This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

  • Can't run itunes because it has detected a problem with audio configuration

    What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

    Some people have found the following works:
    Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
    http://docs.info.apple.com/article.html?artnum=93698
    Turn off antivirus/anti spyware
    Go to Control Panel>Add/Remove Programs>Change or Remove Programs
    Select iTunes, then click on Change, then select Repair.
    Restart computer

  • ITunes has detected a problem with your configuration

    I recently tried to use my iTune player and when I click the shortcut to open it, the following error message appears:  "iTunes has detected a problem with your configuration.  Audio/Video playback may not operate properly."  The program shows up on my desktop, but when I select something to play, nothing happens.
    I use Windows 7.  It did work previously, and I do not know of any specific change made to my computer that could have caused this.  I am not sure when it developed since I have not tried to use iTunes for a week or more.  I checked the community forum and there were similar problems 7 years ago, but could not find any solution (One link to a solution is not longer good.)

    Hello LouisvillePS
    Start with the troubleshooting in the article below to resolve issues with start. You can use Safe Mode to start up to see if it still pops up as well as testing in a new user on your computer.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/dl1614
    Regards,
    -Norm G.

  • TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.

    'm having a problem with downloading and installing the new version of itunes for windows (11.1.4)  I have done everything the troubleshooting article has said and it is still not working properly.  I have even done a repair to see if that works and it has not.  Has anyone else found a new way to get it working?

    Try Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be..

    I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be...
    I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • Hello , please am having a problem with my iphone 5 , the battery runs out quickly , also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out , and my final problem is that is "no service " appears a lot can you help ?

    Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that  "no service " appears a lot  especially when opening wifi or 3G , can you help ?

    Your battery is running quickly because your cellular data connection is weak.
    Is your phone carrier a supported carrier:   Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
    For your no service issues:  If you see No Service in the status bar of your iPhone or iPad - Apple Support

  • HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

    Hi folks,
    i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
    Can any one help me in this regard??

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

  • MacBook Pro 15 with Windows 8.1 installed via Boot Camp problem with keys "@" and " " of the keyboard

    Hello,
    I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
    The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
    When I type the "@" key, I get "<"
    When I type the "<" button, I get "@"
    I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
    Someone of you has he encountered the same problem?
    Thank you.

    The language of my Keyboard is French

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

Maybe you are looking for