Problems with Trainz Mac since upgrading to OSX Mountain Lion

I have tried various screen resolutions but to no avail. The objects in the game have become very small.
Any Ideas Please

Try the app developer's FAQ's > http://support.auran.com

Similar Messages

Cannot access hotmail and other sites since upgraded to osx mountain lion

Since I upgraded air to OS X Mountain Lion, I stoped accessing several websites such as hotmail (I can open first page but not after I login), and same for facebook, some bank accounts and even some sites that do not require passwords. Any tips? Many thanks from Brasil!

vikramkg wrote:
Hi
if i increase the memory will the system become faster.
No. Installing RAM doesn't make a computer faster.
Can we get it done this in Apple store
Sure, but why pay for that when you can do it yourself.
without upgrading hte memory cna we make this ystem to run faster ?
Have you checked activity monitor to see if any apps or processes are takin up a large percentage of the CPU?

The built-in camera doesn't work since upgrade to osx mountain lion

macbook air late 2010

I have the same issue. I did a clean install of ML and my camera is not recognized on any application. I have a Macbook Late 2008. Any help will be appreciated. Thanks!

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

TS1394 my friends mac book pro never got an upgrde that allowed her to have the app store on her dock, now I can't help her to upgrade to OSX mountain lion... any ideas on how to do this?? it's driving me crazy!

my friends mac book pro never got an upgrde that allowed her to have the app store on her dock, now I can't help her to upgrade to OSX mountain lion... any ideas on how to do this?? it's driving me crazy!

Bad choice, since the cost is exorbitant. Snow Leopard ($29 USD) is available from its online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.]
Additionally, you can get a MAS redemption code via the same route. See https://discussions.apple.com/thread/4140947?tstart=0 for details.

Do I have to pay to upgrade to OSX Mountain Lion? I just got my mac 6 months ago

Do I have to pay to upgrade to OSX Mountain Lion? I just got my mac 6 months ago

http://www.apple.com/osx/uptodate/
You may qualify for the Up-to-Date Program if you bought your Mac from Apple or an Apple Authorized Reseller on or after June 11, 2012.
explains it all. If it does not meet the date above then you have to purchase it at $19.99 I think

Ever since i downloaded OSX Mountain Lion, Express VPN no longer works properly for me. Even though it says I am connected, webpages refuse to load. However, everything works fine when its turned off. I cannot go on many websites without the VPN.

Ever since i downloaded OSX Mountain Lion, Express VPN no longer works properly for me. Even though it says I am connected, webpages refuse to load. However, connection speed is fine when its turned off. I cannot go on many websites without the VPN. My current location is Shanghai, China. OSX Mountain was installed this morning and everything worked fine until then. Is Express VPN not supported? What do i need to do in order to get it working again on my Macbook Pro (early 2011). I want to be able to go on websites such as Youtube, Facebook, Twitter, ect...

Hi,
I am having the same issue listed above on my new Mac Mini i just bought, I also contacted Express VPN support and got the same instructions with exception of the command to run in the utilities terminal. I tried the steps listed, and both commands (posted here, and sent to me directly by Express VPN support), and still unable to connect on my Mac Mini running OS X 10.8.2, but I am able to connect on my iPad and my MacBook which is running Mac OS X 10.6.8. Usually Express VPN is spot on with their customer support, but this is taking longer to get resolved. Here is the steps sent to me
Try doing the following to see if the problem gets resolved:
Please follow the instructions here: https://www.expressvpn.org/support/setting_dns_servers_mac_os
(should still be the same for Lion) and then add the following DNS servers: 8.8.8.8 & 208.67.222.220. After adding the DNS servers, please do the following steps as well:
Note: If you're connecting to your ISP via a PPPoE connection, then set the DNS servers on the PPPoE connection itself and then restart your computer for the DNS settings to take effect.
1. Click on Applications
2. Click on Utilities
3. Click on Terminal
4. Type the following command (without the quotes): "sudo killall -HUP mDNSResponder"
5. Press enter and then try reconnecting to the VPN.
If you're still unable to connect, please send us in the latest log files.
Hope this helps. Let us know how it goes.

After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recordings

After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recorded files.

HI,
In Message Menu > Preference > Accounts you should at least have the iMessage Account (Which is Enabled) and th Bonjour one that most likely is not.
After that if you had iChat type AIM valid Screen Names or Jabber IDs in an earlier OS then the System Preferences > Mail, Contacts and Calendars should list them and have them set to be used with Messages.
There is a vague chance that you have not set these up yet (you can do it in Messages or Mail, Contacts and Calendars)
Once you have a t least one other "Account" other than th iMessage one in Messages then the Buddy List option will appear next to CMD and 1 in the Window menu list.
NEXT
If you go to the General Section of the Messages Preferences you can unlink several Buddy lists if you have them (By default they are shown as one gathered Buddy list)
I Have several Accounts logged in (AIM valid and Jabber ones)
Uploaded with Skitch!
And I separate them in to individual lists which then gives me this in the Window Menu
Uploaded with Skitch!
8:06 PM Thursday; August 2, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Mainstage always crashes before even start after I upgraded to OSX Mountain Lion. Doesn't matter if I use 32bit or 64bit mode. What to do? I bought Logic Studio 9 as a hard box at a retail store (including Logic Pro 9, Mainstage, Soundtrack Pro, Compresso

Mainstage always crashes after I upgraded to OSX Mountain Lion. Doesn't matter if I choose 32bit or 64bit mode. I sent all the error reports to Apple but no help from there. I heard rumours that Mountain Lion creates the problem. With Lion I had no problem. Logic Pro runs without issues. So what can I do now? Do I have to reinstall Logic Studio and then download all the updates again? Hopefully not.. Any advice? Thanks to all! Ben

Try delete the mainstage preferences
from USER/library/preferences com.apple.mainstage.plist
even if you are running mainstage 2.1.3 and not 2.2.2 it should work with mountain lion

Have macosx 10.5.8 model iMac7,1 can I upgrade to osx Mountain lion?

I have a Mac osx 10.5.8
model: iMac
model identifier iMac7,1
Intel Core 2 Duo
2.4GHZ
Can I upgrade to osx mountain lion Or to something higher than what I currently have and if so how?
Thanks!

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8.
You should now see the App Store icon, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

How can i upgrade to OSX Mountain Lion other than from the app store?

I am trying to upgrade to OSX Mountain Lion from OSX Lion but i get this message:
"We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
Further I am able to download other programs from the app store (like growl) but it does not work for Mountail Lion ????
I looked through the forum and one post said that i have to use lion recovery to reinstall osX lion but then it defetes the objective of upgrading.
Please help me
Cheers

If your system's not compatible with 10.8 and has at least a Core 2 Duo(not Core Duo) CPU, phone the online Apple Store and order a download code for 10.7.
(73799)

After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recorded files.

After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recorded files.

Try using one of these video players. VLC usually works with most files.
Video Player - Divx
Video Player – Flip4Mac
Video Player - VLC

Is it safe to upgrade to OSX Mountain Lion yet?

Is it safe to upgrade to OSX Mountain Lion yet?

Yes, it is. But not all 3rd party plugs are compatible yet and fail AU validation.

I am having problems with AOL since downloading new OSX Mountain Lion

Since downloading OSX Mountain Lion I can't access AOL Mail -- has a line and a circle next to each e-mail.
Any suggestions.

See the discussions under "More Like This" at right.

Upgrade to osx mountain lion will final cute version 5 still run?

if I have final cut pro version 5 and I upgrade me mac to OSX maountain Lion to be able to use aperture. Will I still be able to use my final cut pro on version 5 runing fine with the new OSx mountain lion? many thanks for any advice!

You also might be better off asking your questions in the Final Cut Studio forum, since this is the Final Cut Pro X forum.
https://discussions.apple.com/community/professional_applications/final_cut_stud io

Problems with Trainz Mac since upgrading to OSX Mountain Lion

Similar Messages

Maybe you are looking for