Problems With Transporting Interaction Center Scripts

I have problem when I select a Script and click on Transport button in the Web UI for the interaction center, IC_Manager Role. After clicking on the transport button I need to check in the back end (transaction code SE01), if a customizing request has been created for that script I selected.
So the problem is how do we find out if there is customizin request for that script or not? Is there a Pop Up window which comes after clicking on Transport button which would give me a customizin request number, which could be later used to find the request in backend?

Hi,
Try checking this in the BSP Application CRM_IC_ISE.
If you open the script on the third tab (Script Transport) you can see the transport details.
Hope this helps.
Rgds,
Rajiv

Similar Messages

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

STMS problem with transport import

Hello all
I had a problem with transports in STMS.
Log history of imported transport didn't show any error and simophore is green.
But in target system data element wasn't presented.
When i import this transport again - it's all ok.
It happened twice. And i didn't find any solutions yet.((
Did anyone have the same problem???

Start import LIMUMETH/NPQ/CL_RESERVATION           SPLIT_RESERV ...
0 entries from SMODILOG (CLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (CVCLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (CUCLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (PRCLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (SVCLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (CICLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
method SPLIT_RESERVATION                                             include /NPQ/CL_RESERVATION===========CM01Z      will be impor
REPOS /NPQ/CL_RESERVATION===========CM01M      A replaced.
End of import LIMUMETH/NPQ/CL_RESERVATION           SPLIT_RESERV
E071-LOCKFLAGs 000016 - 000016 updated ('2', 1 entries).
E071C entries 000016 - 000016 deleted (1 entries).
report /NPQ/CL_RESERVATION===========CM01M      (L) synchronized.
report /NPQ/CL_RESERVATION===========CP         (L) synchronized.
169836 5330910
LIMUTABD/NPQ/LOCATION_HIERARCHY_QRY was not imported in this step
LIMUTABD/NPQ/RESERV_ROOM_SERVICE_STR was not imported in this step
LIMUTABD/NPQ/RES_SERVICE was not imported in this step
LIMUTABD/NPQ/RES_SERVICE_DETAILS was not imported in this step
Start import LIMUWAPP/NPQ/FM                       SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM                       SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM                       SERVICE/GETS ...
Start import LIMUWAPP/NPQ/FM_NEW_DESIGN            SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETS ...
0 entries from SMODILOG (WAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIO
0 entries from SMODISRC (CVWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (CUWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (PRWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (SVWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (CIWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 d /   0 i /   2 u /   1 = 33% ucf O2PAGCON
3 entries for O2PAGCON imported (TR/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d /   0 i /   1 u /   0 =   0% ucf O2PAGDIR
1 entry for O2PAGDIR imported (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d /   0 i /   0 u /   4 = 100% ucf O2PAGDIRT
4 entries for O2PAGDIRT imported (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d /   0 i /   0 u /   1 = 100% ucf O2PAGEVH
1 entry for O2PAGEVH imported (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from O2PAGPAR (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY                                  %) d
0 entries from O2PAGPAR (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY                                  %) d
0 entries from O2PAGPART (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY                                  %)
0 entries from O2PAGPART (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY                                  %)
0 entries from SOTR_USE (LIMUWAPP/NPQ/FM#_NEW#_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USE (LIMUWAPP/NPQ/FM#_NEW#_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USEU (LIMUWAPP/NPQ/FM#_NEW#_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USEU (LIMUWAPP/NPQ/FM#_NEW#_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
End of import LIMUWAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETS
R3TRDTEL/NPQ/DELIVERY_POINT was not imported in this step
R3TRDTEL/NPQ/SRV_POINT was not imported in this step
E071-LOCKFLAGs 000021 - 000025 updated ('2', 5 entries).
E071C entries 000021 - 000025 deleted (5 entries).
DEVK902177           touched.
table O2PAGDIR (R) synchronized.
1 tables in P-buffer synchronized.
2 tables in R-buffer synchronized.
42832 5373742
158359 bytes read.
Transport overhead 15.3 %.
Data compressed to 5.3 %.
Duration: 14 sec (11311 bytes/sec).
1 0
Summary:
15 REPOS imported.
Totally 15 Objects imported.
Totally 1551 tabentries imported.
5373742 bytes modified in database.
[dev trc     ,00000] Thu Mar 03 18:26:16 2011                                             13410099 13.410099
[dev trc     ,00000] Disconnecting from ALL connections:                                       21 13.410120
[dev trc     ,00000] Disconnecting from connection 0 ...                                       33 13.410153
[dev trc     ,00000] Now I'm disconnected from SAP DB                                        4897 13.415050
[dev trc     ,00000] Disconnected from connection 0                                            63 13.415113
[dev trc     ,00000] statistics db_con_commit (com_total=17, com_tx=17)                        26 13.415139
[dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)                      25 13.415164
Disconnected from database.
End of Transport (0000).
date&time: 03.03.2011 - 18:26:16
Main import
End date and time : 20110303182616
     |   Ended with return code: ===> 0 <===

Problems with transporting

Hi,
I have a problem with transporting from DEV to PROD. There are no imports in import queue in SMTS.
I can export data from DEV, but there are not displayed in STMS. (Only texts as Language Netweaver 04 SR1 CS).
In TMS alert viewer there are a lot of errors. F.E. READ_DOCU_FAILED, RFC_SYSTEM_FAILURE, TP_REPORTED_ERROR (Transport control program tp ended with error code 0012).
We had no problems with this before but the old transports are not displayed in gueue too.
The RFC connection seems to be ok.
Can anybody help?
Thanks
Radka

Hi,
it seems does not help.
But I found a problem in transport groups.
If i run a check of transport groups. The error message "System DWP cannot read test file written by DWD" is displayed.
"When the system checked the transport groups, it discovered that system DWP cannot read a test file written by system DWD to the transport directory. The return code of the action was 0008"
DWD=DEV
DWP=PROD
Can anybody help? Or does somebody know, where sap creates the test file? Or the name of the test file...
Thanks
RH

I have a problem with Transport the personalization of standard ess compone

I have a problem with Transport the personalization of standard ess component.
My problem is in several components, such as:
portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.area_personal_information/persinfo_es/com.sap.pct.erp.ess.13.pdata
I have personalized this page (into rol, not directly in the page), with Ctrl+Right button.
Now i transport the rol, from Development to Quality environment, but i don't see the changes in Quality.
My system is NW 7.01 SP7, Can be that the problem?
Any idea to solve this problem?

First please see note 1234273 which details how best to personalize
for all users.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ed3ce7f8593eebe10000000
a1553f7/frameset.htm
Here you can read:
"If an iView is transported to another portal all these properties are
also transported. This is needed to make sure that role-specific changes
could be transported together with the role. End user personalization
data is NOT transported in this way as end user personalization is only
local to the current portal."
Could you please ensure that personalization was done by an admin user?
I'm afraid that if it was done by an end user, personalization isn´t
transported as it's explained in the documentation provided.
Could you please confirm whether you are using exactly the same language
to access to both systems, development and quality? Maybe you are using
language en(us) in one system and en(gb) in the other one. Please take
into account that personalization is language specific.
From the web dynpro end, the WebDynpro personalization is stored
NOT in the PCD prior to 710 release. And as such it cannot be included
in a portal role transport. This feature is available with NW 7.10 SP2
or later (from webdynpro point stand). The best option is to
go with NW 7.30 as this is the first NetWeaver release with EP since
NW 7.02.

Problem with shell commands and scripts from an Applescript Application

Hi-
I am fairly new to OSX software development. I am trying to build an application that creates a reverse SSH tunnel to my computer and starts OSXvnc. The idea is that my Mom or anyone else who needs help can connect to me without having to tinker with their firewalls.
There are plenty of resources on how to do this, and I have found them. What I have a problem with is the following.
I am building this application in Xcode as an Applescript application, because Applescript and shell scripting are the only forms of programming I know. I use an expect script to connect through SSH, and a "do shell script" for the raw OSXvnc-server application to allow screen sharing.
The problem is that when I click on the button to launch OSXvnc-server or the button to launch SSH, the application freezes until the process it spawns is killed or finishes. For example, I can set SSH to timeout after 60 seconds of no connection, and then the Applescript application responds again. I even tried using the ssh -f command to fork the process, but that doesn't seem to help.
I am also using "try" around each of the items.
What am I doing wrong? How can I make the buttons in my app launch SSH and OSXvnc-server without hanging the application while it waits for them to finish?
Thanks so much!

See here for an explanation of the syntax.
(20960)

"There is a problem with this installer package - script is required to complete install," - please can someone clarify script supplied.

I have downloaded EMET 4.1 but it will not install -
"There is a problem with this Windows installer package. A script required for this install to complete. Contact your support personnel or package vendor."
I have seen the same problem answered in the support section with a script posted as follows, and wondered if it would solve my problem - only there is no explanation with it and I have no idea what to do with it! Forgive my ignorance but could someone
please explain what to do with it please? Many thanks.
(I looked up the other thread but I was no wiser.)
This thread is probably a dublet of http://social.technet.microsoft.com/Forums/pt-BR/ab0ee94b-ce61-4a62-8478-41a1e8ac39e2/emet-40-installation-fails-with-error-code-1720?forum=emet
Please create and check a verbose Installer logfile: msiexec.exe /?
_FA2E7A16_A819_4F3A_AB7E_0A039BE81BD7 refers the Custom Install Action Blob _6A58D16B437E5B268B3B9D09B8746240 which conatins this vb script in EMET 4.1:
' Begin
REM kill the old EMET 3.0 Notifier process if running (upgrade scenario)
strAppName = "emet_notifier.exe"
Set objProcesses = GetObject("winmgmts://" & strMachine).ExecQuery("SELECT * FROM Win32_Process WHERE Caption LIKE '" & strAppName & "'")
For Each objProcess In objProcesses
intRetVal = objProcess.Terminate(0)
Next
REM kill EMET Agent 4.0 process if running (re-installing scenario)
strAppName = "emet_agent.exe"
Set objProcesses = GetObject("winmgmts://" & strMachine).ExecQuery("SELECT * FROM Win32_Process WHERE Caption LIKE '" & strAppName & "'")
For Each objProcess In objProcesses
intRetVal = objProcess.Terminate(0)
Next
' End

Managed to get the installation sorted. Go to Control Panel, and where you have a list of all installed programs, repair all the Apple/Itunes related programs. Installation worked fine after that. Hopefully it helps you out too!

Problems with Long Interactive PDFs with Extensive Interactivity via Buttons and Hyperlinks

I have inherited a project which requires the creation of large interactive pdfs with lots of buttons and hyperlinks. I am having continuing problems with buttons not working and long periods of wasted time as attempted exports fail.
Background:
The largest books range from 264 MB to 411 MB – (764 to 1024 pages). Per book, the maximum number of buttons on each page is 16, linking separate files (subsections) in the book via text anchors. The buttons are created using Master Pages which are set for each file (subsection) in the book. 50% to 60% of the pages in each file (subsection) will also be referenced as 2 hyperlinks. One is the source page hyperlink on each workflow and the second is a listing on the source page as a possible navigation path. I have created hyperlink destinations for each page which is used to generate the source and navigation hyperlinks. With 2 hyperlinks representing 50%-60% of the pages - that means the largest book contains a maximum of 1200 hyperlinks. Each file (subsection) also has it’s own separate TOC and the bookmarks that are created (optionally) during the TOC creation process.   As currenlty formatted, the book is primarily images of workflows which mean 50%-60% of the pages contain pdf images.
Several questions:
1. How do I get my buttons to work consistently? There is nothing worse than working hard and then ending up with faulty product. I have been thinking about combining all the files into 1 document per book. Then I could change the buttons to objects, add a hyperlink over each one and set them for a specific hyperlink destination. Can I do that if the buttons are on Master Pages? Can InDesign handle a document with 1024 pages?    I can't fix the problems in Acrobat later because it would mean 1024 fixes for just 1 button correction.
2. How do I stop InDesign from freezing when exporting these large pdfs? It seems to wait until the final steps to crash which sometimes means a 4-6 hour waste of time per export.
3. Are we making a mistake using pdfs as our workflow images? I'm not pleased with the quality of the images we have and wonder if we switched to another image format if this would improve the results.   Would it be worth the effort and relinking? I have been reading different information on what the preferred source image format is for InDesign. One article I found yesterday says using pdf images is a problem. Another site said the Photoshop, TIF and JPG are preferred but PDFs were also acceptable.
4. Do I need to propose scrapping InDesign as the source of the project? If so, what application can better meet my needs?

Those are the limitations you have to put up with.
Apple doesn't follow the PDF spec. It chooses which PDF features it will support.
As to the version number (v5 or v6 or the new multimedia features in v9), there is different support in different versions of Reader/Acrobat as the product has developed. You just need to post a message to downloaders that they need to view the file in Adobe Reader version X or above to get the best experience.
Other industry standards face the same problem: How can you add new feature like multimedia? You can't always be backwards compatible.

Problem with Prometric exam center

Hi,
I would like to find out where can I get help if I face problem with Prometric exam.
I had registered with Prometric for exam 70-647 on 16-Sep at 10:00AM.
On 16-Sep, I reach the exam venue and was inform that the exam venue was close.
I had wasted 7 hours on that day (2 hours travel from my home to exam venue, waited at exam venue for 3 hours and take another 2 hours to return home) and didn't manage to sit for exam. I keep calling exam venue phone number on that day and no one is answering
the call.
Upon return home, I submit a complaint to Prometric using the form on their website.
Prometric only reply me with an email 2 days later asking me to call their candidate care number.
I call Prometric candidate care and spend 10 minutes to explain to them my problem as if they never receive my complaint. Prometric told me their system show that the exam venue is not close on that day and I have to call the exam venue to re-schedule the exam.
I then call the exam venue and was inform that I need to call Prometric to re-schedule the exam for me. They say their system does not show that I had register for the exam on 16-Sep. I had explain to exam venue that it was Prometric who ask me to call them
to re-register. They told me they will call Prometric on this issue and get back to me.
After one day without return call from either exam venue or Prometric, I decided to call Prometric again. I then have to spend time to explain to them the problem that I face from beginning (I can't understand why a large organisation like Prometric don't keep
a log of customer feedback/complaint and expect customer keep explaining to them whenever customer call back). Prometric then told me they never receive any update from exam venue that they were close on 16-Sep and expect me to keep calling exam venue to get
them update Prometric that they were close on that day. The guy from Prometric candidate care refuse to take ownership of this problem to call the exam venue to find out whether it was close on exam date.
I then call the exam venue again and was inform that Prometric's number is busy whenever they trying to call them. They told me they can't help me to re-register for exam, only Prometric can help me to re-register for exam.
It seems like none of Prometric Candidate care or exam venue want to take ownership of this problem.
Please advice who can assist me with this issue?

SUB: Asking for Help (Exam has not been conduct at Prometric Center at Below address)
Test Site Code:     IIJ6K
Test Site Address:     Off NH-8
Ajwa Waghodia Crossing
Vadodara, GJ 390019 India
Test Site Phone:     912652454057
Myself Snehalkumar, 30 Jan 2014, I scheduled to have an exam on 23 March April2014. I went 1 Hour Before at Site Location Which Is above.
At Site location, No one is there except security. I called on above site location number no one picked up the phone. I got the number from security 919879261687 that person (Sajesh Thomas) was managed/arranged at there. I talked with him and he replied me
that there is no more Prometric center here its only for L&T employees.
He gave me another number 09313978791 and said that talked to him, he is regional head of Promatric I think his name is Utkarsh Pande.
I cleared state him what i can do now? I came faraway (90kms) from here for attending an exam. He asked me what exam it is? I said 74-409. He said that its free exam so reschedule it. What about my time and petrol to come from 90 km?
I was very frustrated to listen this kind of answer. I am very disappointed and I said that i will complaint to Microsoft and Promatric center. He answered that go for the complaint. Just because he is regional Manger so he is careless to manage/arrange
and give me pathetic answer.
And give me another number and that was call center number 01244517160. He said that called tomorrow at call center. This is just one center of Promatric center that comes under him . How about other center? Same thing happen at other center which comes under
him.
And L&T person (At site location) said that talked to regional head of Promatric Center. If regional head give me this kind of answer, Where should i go. I was waiting for long time and think what to do next? At some stage i was very depress.
I wasted time and money and went back to home 90kms without appearing an exam just because some irresponsible person forgot to arranged an Exam.
If there is no more Promatric center at this site than Why they did not contact to let me know that there is no longer Promatric center? even day before, if they send me a mail or make a call its ok for me. but that did not happen.
Why on Promatric schedule list to see this site location if no more Promatric center. If its for L&T employees only than please specified that for only L&T employees or remove it from the schedule list so no one will have problem like i had.
I logged into Promatric Center website. I click on rescheduling an exam but that filed was empty so no way to reschedule it.
Now you tell me what should i do after facing this problem?

Problem with Customer Interaction Module in Web Channel Builder

Hello Everyone,
Facing an issue with Web Channel Builder Customer Interaction Module.
In Web channel builder we have done all the required configuration changes, but still we are not able to get the reviews and rating part in the product detail page.
We have created a new application and all the other module are working fine ,but the only module that is causing problem is Customer Interaction module. Every time we are activating this module rest modules stops working.
Can anyone please let us know what could be the root cause of this problem.
Are there any setting that has to be done ...that we are missing in?
I have studied that Product Catalogue is integrated with this module. Are there any setting that are to be done in the Product Catalogue module in Web channel builder?
Thanks in advance!
Regards,
PB

Hi PB,
Did you please get any proper error / exception in log file? Did you please check the web.xml as well that there is no same application name defined.
Can you please also copy paste the log please.
Thanks,
Hamendra

Problems with Transport Management System

Hi All,
i seem to be having some issues with my Transport Management System, we have a two system landscape DEV & PRD, the operating system is windows 2003 server. i am trying to access the usr/sap/trans on the transport host (DEV) from the PRD system, i have put patches on the DEV server, but i can't access these patches from the PRD server. I have also tried to release a test transport, but the queues are not being updated. the systems are in the same Domain and the same transport group. on the PRD server i have specified the following value for the DIR_TRANS =
DEVSERVER\sapmnt\trans. i have checked the files and they are shared, what could be the cause of this?

Can you please check the access of global TRANS directory from your PRD server. Login to your PRD server, goto transaction STMS --> Overview --> Systems. Select your developement system and goto SAP System --> Check --> Transport Directory. If it can access the global directory the tick marks will come otherwise there is some problem with the directory access.
Regards,
Abhishek Jain

Calling all script experts - Wierd problem with a previously perfect script

Hi,
As script which used to work fine is now causing me big problems.
The line that is causing the problem is highlighted in the script editor as:
tell application "Finder" to set file_List to every file of entire contents of master_Folder -- Obtains all related files.
On running the script I get the following message:
Finder got an error: Can't make every file of entire contents of alias "Atlas Mac-Mini:Users:design:Desktop: TESTpictures - for script:Landscape copy:" into type reference.
As I said the script used to work fine, A couple of members of this forum have tried to rewrite the script for me (thanks to them) but I'm still gettig the same message. I'm wondering is there something wrong with my system (which otherwise works fine).
I'd appreciate any help and advice on what may be going wrong.
Thanks, Ray
In case it helps, here's the full script (which adds the file's path to the filename):
set master_Folder to (choose folder with prompt "Choose a folder for filename processing") -- Select folder.
set path_Depth to ((choose from list {1, 2, 3, 4, 5} with prompt "How many paths in these filenames?") as number) -- Select folder depth.
tell application "Finder" to set file_List to every file of entire contents of master_Folder -- Obtains all related files.
repeat with i in file_List
set {oAStId, AppleScript's text item delimiters} to {AppleScript's text item delimiters, ":"}
set fileItemsList to text items of (i as string) -- List of individual path items [disk, folder(s), file] of file of file_List.
set fileItemsCount to count fileItemsList -- Number of individual path items.
set fileItemsList to text items (fileItemsCount - path_Depth) through fileItemsCount of fileItemsList
set fullFileName to last item of fileItemsList as string -- Obtain full file name.
set AppleScript's text item delimiters to "."
try -- Obtain file name and file extension.
set file_Name to ((text item 1 of fullFileName as string) & "-") -- Obtain only file name, less any file extension..
set file_Ext to ("." & (text item 2 of fullFileName as string)) -- Obtain file extension.
on error -- Sets up a "If you can't do case 1 then try this" .
set file_Ext to "" -- If no File Extension exists, set 'file_Ext' to "".
end try
set AppleScript's text item delimiters to "-"
-- Change name of file.
set name of i to (file_Name & ((text items (1) through ((count fileItemsList) - 1) of fileItemsList) as string) & file_Ext)
set AppleScript's text item delimiters to oAStId
end repeat
Various Mac OS X (10.4.6)

Hello RaymondTomin,
I don't see any reason for Finder to throw such an error in the said line. Perhaps something is wrong in your system.
Try the following test scripts. If they fail on any folder you choose, I'm afraid something is surely wrong in your system, not in your script code.
(If they fail, create new user account and try them in it to narrow down the problem cause. Also try repairing disk and/or repairing permissions.
And it might help as well to clear some caches by using, e.g. Onyx:
http://www.titanium.free.fr/pgs/english.html
Or even to re-apply OSX's Combo Updater:
http://www.apple.com/support/downloads/
Good luck
H
-- TEST 1
set fda to choose folder
tell application "Finder"
items of item fda
end tell
-- END OF TEST 1
-- TEST 2
set fda to choose folder
tell application "Finder"
try
items of item fda as alias list
on error
items of item fda as alias as list
end try
end tell
-- END OF TEST 2
Mac OS 9.1.x

I have a problem with my Notification Center!

I have a problem with my iPhone 4 and i want to see if anyone else has it...You see I recently updated my iPhone 4 to iOS 5.0.1 and my notification center stopped working!Well it works only in landscape mode.Before that itused to work perfectly-I was swiping it down with no problem!
Can anyone give me a solution?

Try reset iPad and try again.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Problems with "GET" in a Script Logic

Hi,
I created a Script Logic in BPC NW with the following code:
*WHEN *
*IS *
   *REC(GET(CONCEPTO=M30121),CONCEPTO=M213)
*ENDWHEN
And I click "Validate and Save" and I get this error:
Validation Error
Unknown Dimension Name in Keyword: "*:
What's happening?
Regards,
Miguel.

Thanks, but my problem is with "GET" function in Script Logic. You don't look at what I do with the code because it's an example. The problem is that the GET function doesn't work.
I created a Script Logic in BPC NW with the following code:
*WHEN CONCEPTO
*IS M30121
   *REC(FACTOR=GET(CONCEPTO=M213),CONCEPTO=M30121)
*ENDWHEN
And I click "Validate and Save" and I get this error:
Validation Error
Unknown Dimension Name in Keyword: "M213):
And if the code is like this:
*WHEN CONCEPTO
*IS "M30121"
   *REC(FACTOR=GET(CONCEPTO="M213"),CONCEPTO=M30121)
*ENDWHEN
The error is this:
Validation Error
Unknown Dimension Name in Keyword: ""M213"):
Regards,
Miguel.

Problem with running Bash shell scripts

I am unable to run Bash shell scripts on the UNIX Terminal application.
This is the transcript from the Terminal application.
Zhi-Yang-Ongs-Computer:/Applications/MetaPost/metapost-1.102 zhiyangong$ ./test1.sh
dyld: Symbol not found: _BC
Referenced from: /usr/local/bin/bash
Expected in: /usr/lib/libSystem.B.dylib
Trace/BPT trap
Zhi-Yang-Ongs-Computer:/Applications/MetaPost/metapost-1.102 zhiyangong$
Is this a problem with the the default installation of the Bash shell? Can I install the Bash shell on my own? If so, how can I do that?
Also, how can I get the dynamic linker, dyld, to refer to the symbol "_BC"? What does this symbol "_BC" refer to?

This was in your posted output:
/usr/local/bin/bash
You are NOT running the default bash, you are trying to run a private copy.
The default Mac OS X bash is located at
/bin/bash
Try the following:
/bin/bash ./test1.sh
Does that work?
What is the first line of your script? Is it:
#!/bin/bash
Or maybe
#!/usr/bin/env bash
/usr/bin/env would find the first bash in PATH . I find this most useful for finding perl on different systems, but sh, ksh, bash, zsh, csh, tcsh are all generally found in /bin so I do not bother using /usr/bin/env
And if you have
#!/usr/local/bin/bash
Then the person that wrote test1.sh choose to use something besides the default bash
Or maybe this script was transferred from some system where you needed to put your own copy of bash in /usr/local/bin because the vendor does not distribute bash
Then again, you have not showed us what is inside your script, so it is possible something in the script called something else which invoked the /usr/local/bin/bash
If that is the case, then you might try:
/bin/bash -x ./test1.sh
which should show you the commands executed before it died.

Problems With Transporting Interaction Center Scripts

Similar Messages

Maybe you are looking for