Problems with typing-is it T9 or what...?

Recently,every time I try to wright a message or to make some calendar entry,I cant do it cause I have problems in typing-I cant type a word because it doesnt change a letter,but it changes two or free letter or a whole word. Is that T9? If it is,I dont know when and how I've switched it on and whats most important,I dont know how to switch it off and start typing in normal manner. Anyone knows how to make typing normal,like it was before?
Solved!
Go to Solution.

Like with my internet issue,Abi99 gave a fast solution... Thanks again! There was number keypad and letter keaboard,I've switched of second one and there was no changes,but switching off the number keypad made it better. So,I've switched off both of them and now its normal again.
You really know everything about Nokia phone,do you...
One little question aside-how to change ringtone for messages. Yes,i know trhough setings-profiles-general.personalise.message alert-tones,but I did that and it wont change the tune. Is it maybe beacause of the relatively often changing themes or etc.,some of them changing lot of things. It probably isnt that,actually it isnt a big issue,just to ask why it wont change that alert. Its been set to "soundmessagealert" from the sounds (I dont know how it got there at the first place,when I've downloaded it),and I am changing that to some tone,but it brings back that sound again.
How to change it or how to erase that from the sounds,so it cant make a mess anymore?
I hope it wont be to much,but its better to put that in the same theme,then to make another and another one-how to download something from the computer to the mobile. I've send some pictures via right click-send to- N8-00 (I dont know the other way,of course it was with the usb connection),but they were not in the gallery. However,when I wanted to change the walpaper,there was an image option and when I clicked on that pictures were there.
In which folder they are and how to see/open them,is there some better way to download and arrange something from the computer?

Similar Messages

Problem with Typing Korean (-ㅆ)

When I type in Korean, I have a problem with typing a specific letter: double 's' (ㅆ). It comes out if it is at the beginning of the character, but it does not come out if it is at the end of the character: rather than creating 'ㅆ', it types out one 'ㅅ' and then begins a new character with 'ㅅ'. Thus, I cannot type the word '있다' (copy and pasted from website) because I can only type '잇ㅅ다'; but, I can type '쓰다'.

Hi Greg,
I found the following in the Apple Help Viewer. I hope it helps...
About input methods for different languages
Some non-Roman languages like Japanese or Korean have too many characters to fit on a physical keyboard. You can set an input method for these languages in International preferences. The input method you choose determines what characters appear when you type, and provides a way to choose between alternative characters.
When you type a sequence of keys that refers to more than one character or word in a script, a window appears allowing you to choose the character or word you want to use.
When you install Mac OS X, all input methods for the languages that Mac OS X supports are installed on your computer. If you don't see the input method for the language you want to type in, you may need to install a third-party input method.
Some languages may not appear unless a font for that language is installed. For more information about the languages and fonts installed with Mac OS X, visit www.apple.com/support and search for "using different languages."
To use an input method:
Open System Preferences and click International.
Click Input Menu.
Select the checkbox next to the input method you want to use.
Select the "Show Input menu in menu bar" checkbox.
Click the Input menu icon in the upper-right corner of the menu bar. It looks like a flag.
Choose the input method from the menu.
If you're not familiar with the input method and how to use it, see the onscreen help for the input method. If you don't see help for the input method in the Input menu, choose Help for the application you're in. When the Help Viewer opens, choose the input method help from the Library menu.
You can also use the Keyboard Viewer to help you locate specific characters on your keyboard. For more information, click the link below.
Carolyn

Hi, I have a version of CS4 on my Mac. I can not longer open Raw files with it from my Canon 5D. I never had problems with it in the past. What can I do?

Hi, I have a version of CS4 on my Mac. I can not longer open Raw files with it from my Canon 5D. I never had problems with it in the past. What can I do?

is that the eos 5d?
if so, you only need cr 3.3 or greater. what version do you have in your cs4? (help>about plugins>camera raw)
if you need to update it, http://www.adobe.com/downloads/updates/

Having problem with typing chinese in OS X Lion

After installing OS X Lion, I am having problem with typing traditional chinese in my own account. Everytime I switch to traditional chinese the computer become extremely slow and the finally freezed. However, when I am using visitor account, I can type in traditional chinese without any problem. How should I fix this?

Normally differences like that between main and visitor accounts indicate a bad .plist in Home/Library/Preferences in the main account. I don't know which one might cause this...

Problems with typing in mac os lion

hello,
just two days ago I had some problems with my MacBook Pro running with Lion, I just went to update my mac os 10.7.3 to 10.7.4 and suddenly it failed to instal
just then I was told to restart my computer. Ater I restarted the computer there was a huge problem, I had a Kernel Panic issues and I realized that my mac OS had crashed. So I clean install my mac using my recovery disk that was given in the box by purchase.
after re-installing I got this annoying typing problem (sorry for sharing a Youtube URL to show you exactly how it goes)
http://www.youtube.com/watch?v=LVCwZD3ZEVU
I have tried to turn of the auto correct feature on Text & Languages in system prefrences but it doesnt fix anything.
maybe you have some great solution to fix my problems? thanks before..

If it happens in a new user you may be able to repair this with the 10.5.4 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj

Problem with typing

Hi..
I'm a fairly new user to macs...i have an ibook G4 and recently when i'm typing emails or in a word document, the little carrot/tab will keep randomly shifting around/back so my typing just looks all over the place...is this a virus?
Hope someone can help.
Melissa

It;s not a virus, just a poorly designed trackpad. Many folks have this problem with the iBook. About the best you can do is to keep your hands a good distance away from the trackpad while typing

Can't load Tiger - Problem with hard drive or other? What to do next?

I would like some advice on installing Tiger on an IMac PowerPC G4 (700 MHZ machine). This machine has 512 MB SDRAM. The machine is currently running Mac OS 10.3.9. Thus far I have been unable to install Tiger.
The machine is 5 years old and was run in Classic OS 9 for several years. There have been no material problems since upgrading to 10.3.9 several years ago.
I have been Installing with Archive. The install does 100% of the Checking Installation DVD but very soon after entering the Preparing for Installation/Verifying Destination Volume (the task bar has only filled about 5%) it kicks out of the install saying that there were errors in installing the software. No further information is provided.
I have disconnected all external devices and run the Tiger disk utilities. I receive the message that an “Invalid catalog record type” has been encountered and that “Volume Check has failed.”
“Error: The underlying task reported failure on exit”
“1 HFS volume checked”
“1 volume could not be repaired due to error”
At this time, I do not know what steps to take next.
Should I get a stronger utility program to try to mend the hard drive?
Should I conclude that the Tiger update is not feasible given the age of my machine?
I don’t have an external drive to load everything off of the iMac to do an Erase and Install. I am reluctant to do this anyway in case this will not fix the above issue?
Any advice would be most welcome.
700 Mhz PowerPC G4 Mac OS X (10.3.9)

Thank you for your reply.
I found the article you sent me to so fascinating with the pictures.
Sad to say, that this is completely beyond me from a mechanical and personal dexterity perspective. I actually only knew what two items were in the tools required list. I think I could only get through two steps: set imac on soft surface (but not wool blanket) and take the bottom off.
Therefore, I think the next step is to go to the Mac store with my problem description and the imac and see what they can do.
Based on reading the article, I think I should also have more memory installed if in fact, they are going to take the bottom off at the Apple store. Would you agree?
Alternatively, it occurs to me to simply keep using the imac in 10.3.9 and save for a new laptop since I'm now running wireless network and it would be fun to have another laptop accessible around the house. Or maybe save for a new desktop...
Any thoughts?
2nd floor mac

Has anyone had any problems with fusion drive? If so, what kind of problems, and were they easily corrected?

I'm looking at buying a new computer. Has anyone had any problems with fusion drive on iMac? If so, what kind of problems, and were they easily corrected?

NOPE!
I better not! My iMac is only a week old. And, if I did have any problems with it, I would let Apple deal w/it! I do not troubleshoot when I'm under warranty. That's Apple job!

Bought a 2nd hand iphone4. On the screen it shows "Connect to itunes" after connecting it shows in my itunes "There is a problem with your iphone" Pls help me what to do next? Thanks

Hi. I would really appreciate if someone could help me find a way to solve my problem. I bought a second hand iphone4 from my friend's friend. I fully trust my friend coz she said this iphone is working but it was handed to her lowbat so i get home i recharge it immediately and after charging it, i open and it shows to select language and country and i did select. After this it shows on the screen "Connect to itunes". Then i plug it in to my laptop and connect to itunes. It shows in my itunes " There is a problem with your iphone". Please visit the Service Answer Center to find answers to all your questions etc. To find your nearest Apple Store pls click here. I know i was so stupid to fully trust and paid before i check the phone. Can anybody pls help me with my problem.

It's probably broken. Is there an error number displayed by iTunes?

TS3297 Why I can't download a free game I get a message that there's a problem with my payment method but not what it is this is a free app I tried support and got nowhere help

Why can't I down load a free app I get a message that there is a problem with my payment method but I gave all information correctly , I did recently change my card no because I lost my old one .i did change the no. On my account HOPE YOU HAVE SOME SUGGESTIONS I DON'T SEE WHY THEY HAVE TO CHECKMY PAYMENT METHOD FOR A FREE GAME

Contact iTunes customer support.
We're all users like yourself and as such have no access to your account.

I have a iPhone 4S 16 gb and I am having problem with sim activation please tell me what to do

I have a iPhone 4S and I am having problem with its.activation plz tell me. The solution of this problem?

Did you already try these steps?
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
copied from iOS: Troubleshooting activation issues

Copy a small version into a larger file - problem with typing

Hi,
I have paste a copy of a Captivat file in a 10px (each side) larger file. Now I got the problem that typing animation is not on the correct place. Take a look:
the original:
the pasted version in the 10px larger file:
Is this a known problem? Is there a way to fix this?

Hi there,
I would suggest that you use a screen capture utility such as Snagit to capture your Request Membership box and then insert this into your Captivate slide as an image. This will then enable you to accurately position the graphic and should address the typing problem.
Best - Mark
Visit the macrofireball blog

Wifi problems with 10.4.10 upgrade, so what to do ?

Macbook pro core duo 15" Mac OS X (10.4.10)
Hi, most of these subjects seem to be quickly closed.
I experience the same proble as others do :
after having my os upgraded to 10.4.10, I thought my internet provider had troubles...
But all my pc could connect fluidly without any problem.
Wifi indicator seems to be always correct, no problems with wep passphrases on my wifi access point, but traffic is null.
To get traffic, I must disable airport, reactivate it, and I can surf for few minutes or seconds before it hangs again.
On another thread I saw a way to fix it changing the wifi access point setup :
RTS 2304
fragmentation 2305
Beacon interval 50
It works fine (it's not a tipically clean solution, but it helps) but.... but... it works only if my MacBook is AC powered !
If battery powered, I have exactly the same problem than before with wifi connection that drops without external signs...
On ethernet card, no problem.
It looks like 10.4.10 changes many things with power...
It's strange because my problem can be partially solved with ac-power, people also experience audio troubles (with speakers that pops because it goes asleep... power again), other say they kill USB devices because of power too...
My problem is Wifi.
Some Apple resellers say cleverly (for them) that there is no problem, and could not consider there is a problem with only few hundreds of people talking about this on a discussion board....
They prefer to say "our macbook pro works fine with 10.4.10".
I could also say that you could'nt be sick if I'm not.
I'm waiting for an Apple consideration of this REAL problem, as it alters my feeling about their products.

Try a Safe Boot, and see if that helps. Repair Disk Permissions with Disk Utility, while you are booted into Safe Mode. When that is done, do a normal restart.
Do you have any third party devices connected when the kernel panic happens?
You should also check out TheXLab article about resolving kernel panics:
http://www.thexlab.com/faqs/kernelpanics.html

Problem with typing in illustrator

When ever I hold down the shift key when I am typing in illustrator nothing comes up. It completely ignores every character I try to put in. Lower case works but upper does not. Has anyone heard of this or knows a fix I could use? I am not sure what I hit to make it do this.
Illy CS2
Thanks,

I have the same issue with a font I want to use. Works fine in word programs, note pad, simple text, MS Word. It will show up in Illustrator's font list but when I select it my type disappears! Yes, it was a free download. I have tryed a lot of things, re-downloaded same file, I have used three computers with illus, I downloaded the pc version(TTF), tryed that, then I converted it to Mac, I tryed it on an older machine and Illus 6.0, I tryed to resave the font and export outlines in FontMonger, tryed to resave as type1 and type3 - nothing, Font Dr. says it's ok but FontBook says there are major problems when I activate it. I don't know what the problem is with this font. Seems like it has the preview info but no outline data. If I know how Illus uses fonts differently than other programs I would have a better idea as to how to fix it. I hope Illus isn't doing something so people will only use Adobe fonts... who knows, no one from Adobe is talking - from google searches, this has been a known issue for a long time.

Problem with Nightly, Aurora, and 4.01, what should I do?

I had Firefox 4.01 installed on my PC, and I recently updated it to get the Aurora which I noticed allows you to change between Aurora, the Beta, and the Release, which I loved, but I also downloaded Nightly too. Nightly works great and I was able to run both programs no problem, however, I noticed with the new update for Nightly, whenever I run Aurora, it opens up Nightly. I install the release of 4.01 again and it still opens up as nightly, what should I do?

Make sure that you close all other browsers before opening Aurora. Otherwise Firefox will find the already running Nightly build and open a new window in that process. Also make sure that each version has its own profile folder.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

Problems with typing-is it T9 or what...?

Similar Messages

Maybe you are looking for