Problems with upgrading creative play center

I recently purchased a new computer and I wanted to install my software for my nomad jukebox. I installed the creative play center software and I got an error message that stated i must use a different version compatiblw with windows xp. I go to the download section and download the latest software and it won't work because the software can't locate my hardware (nomad jukebox). I can't install my nomad player because my drivers are not xp certified. What can I do?

You can still install the drivers even though they aren't XP certified - you just accept the warning when it is given.
Once the drivers are installed, and the Jukebox is recognised, you can install the software.
I have had PlayCenter working fine with my JB on my XP machine.
PB

Similar Messages

  • Problem with Upgrading Creative Cloud

    I recently upgraded from the trial version and now I cannot use any of the apps. The creative cloud program thinks I already downloaded them and won't allow me to download again and then apps think I'm still in the trial and won't allow use. Please advise.

    hi mbmcdona2,
    It seems you subscription not been activated yet.
    Please try to launch any of the Creative Cloud application and click on "License this Software" button when prompt.
    Sign In with the Adobe ID, you have purchased Creative Cloud subscription.
    After successful sign in it will activate your subscription.
    Hope this helps.
    Please let me know if you have any other question.
    Regards,
    Sumit Singh

  • Updating my Creative Play Center & Audio Headquarte

    I had to have some major work done on my computer a while back, and they updated my Sound Blaster drivers while they were doing the repairs. As a result, my sound card works, my Creative recorder apparently works (it at least opens anyway), but my Creative Play Center and Audio Headquarters will no longer open. I'm running Windows XP and have a Sound Blaster Audigy Audio with IEEE 394 Sound Card . . .
    The current driver is version: 5.2..286.
    Creative PlayCenter is version: .5.23.0
    Creative AudioHQ is version: .3.0.0
    Creative Recorder is version: .2.2.0
    I attempted to update using some of the files from Creative's download center (Audigy Web Update - Audigy Drivers AUD-WEBUP-W4-LB ) but that caused my sound card not to functon at all.
    Which files do I need and what steps do I need to follow to upgrade my system so I can use Play Center and Audio Headquarters again?

    Wow I have almost the exact same problem.
    I have the original creative sound blaster.. (Which came installed with my computer.)
    Originally I had the play center version number, 2.0.
    But I had to recover my hard dri've due to another issue (not related to the sound card) and when I rebooted my system, at first certain creative software programs (such as sound recorder and other audio head quarters software) wasn't working correctly.
    I tried to re-install the software but now here was where my problem got worse..
    The card is set up for basically for plug and play on my system. It didn't come with a CD as the install program seams to be either in the card or saved to my hard dri've.. Not sure exactly but it was there.. (WAS!)
    I should be able to un-install / re-install the programs but for some reason the first time I tried it worked but then the software slowly crashed out.
    I tried to re-install the software again and when the computer finished booting I lost half the software all together! Including the install program! I tried going to creative and tried downloading software but all I could find was play center .0
    I need 2.0.
    As it stands now.. I still do not have the sound recorder and i also lost the creative sound studio.
    but I do have audio head quarters which has the mixer and a few other things..
    If someone knows a way to help either of us please respond..
    Thanks to any that can help..

  • Problems with upgrading firmware in Zen Micro 4

    I am currently having a problem with upgrading the firmware on my Zen Micro 4 GB. The Zen Micro seems to hang right after the first reboot, therefore not finishing the whole upgrade. I am currently trying to upgrade to 2.2.02. It seems that whenever I try to reboot the Zen Micro while it is connected via USB, it hangs at the Creative Logo and I have to end up resetting the system. Oddly enough, I have a second Zen Micro that I was able to upgrade the firmware with no problems whatsoever. Any suggestions?
    P.S. I do have Windows XP SP2 with WMP 0 installedMessage Edited by Hubmasterflex on 0-07-2006 04:23 AM

    Try using reload OS in the recovery mode to erase the current firmware, then connect to the PC and reload. You take a risk doing this though as if the firmware won't reload from the PC you'll be left with an effecti'vely useless player, and you'll have to contact support to get a replacement.

  • Problems with my Creative Sound Blaster X-Fi Xtreme Gamer bulk P

    Hey there!!!
    I acutally have a Problem with my Creative Sound Blaster X-Fi Xtreme Gamer bulk PCI-Card. The Card by it self is working perfectly. But i cant use the Digital-In as the Mic in. I dont know how to turn it so that the Digital-In is the Mic-In. So my Microphone donst work. I hear everything but nobody hears my Voice. There is sometimes a Signal but not the correct, the Guys playing with me dont hear anything of my voice...
    Can somebody help me plz?
    Greetings Thomas

    Moep wrote:
    Why i must use TORRENT?
    Why is this driver not on your page?!
    Please fast help...
    and this is a secure download you mean? ....
    Jeez, calm down already. I never said you HAD to download it, but if you want any of the applications that work in XP to work in Vista then you're going to need that disk; either by downloading it or fromk here,?http://us.creative.com/products/prod...7&product=6743?
    2. ISN'T THIS THE DRIVER FOR ME?! http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7838Message Edited by Moep on 07-3-20070:7 PM
    Maybe you really should take a vallium or something and re-read what I posted, then you may just grasp the fact that that is the exact driver I told you you needed.

  • Problems with Adobe Creative Cloud Packager

    Hello Community
    I have a problem with the Creative cloud packager.
    i can pakage fine but when i try to install the package on another mac it simply says installation failed after a few minutes, i can see it installs Adobe Bridge in the launchpad but nothing more.
    The package includes Photoshop , Bridge, Muse, Premiere, Illustrator, Indesign, After Effects,l Dreamweaver, incopy, lightroom,
    The install works fine if i try to install it on the mac i made the package with
    The mac im trying to install on is a imac 27 " 5K osx 10.10

    Hi KwKn,
    Does it work on the machine on which you are creating the package?
    Do you have any security software running on the machine?
    Also I would request you to go through the below link.
    Creative Cloud Help | Packager
    Regards,
    Anand

  • Problem with upgrade Extension Manager 6.0.4

    Problem with upgrade Extension Manager 6.0.4, code error U44M1P7

    What version of the Adobe Application Manager are you using?  Which operating system are you using?

  • Has anyone had problems with upgrading iPhoto. I am, it's stops at 5 0f 9 and will not finish!! Can someone please help me out?

    Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?

    iphoto upgrading: Apple Support Communities
    iphoto upgrade hangs: Apple Support Communities

  • I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

    I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • Problem with upgrade Windows 2003 to Windows 2008

    Hi,
    I have problem with upgrade Windows 2003 to Windows 2008 R2
    When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall  "adaptec storage manager" but I already remove this driver from the system and registry.
    Any ideas to solve this problem?
    My server it's IBM System x3500
    Regards 

    Not sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
    Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
    AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
    In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
    0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
    1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned. 
    2. Uninstall IBM ServeRAID from the system, just in case
    3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
    4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else. 
    5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
    6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker.

  • Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1

    have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1.    Lost all software and data.
    how to re install elements11. (downloads purchased in your store 2013-05)
    [email protected]

    have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1.    Lost all software and data.
    how to re install elements11. (downloads purchased in your store 2013-05)
    [email protected]

  • I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.  What should I do

    I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
    What should I do?

    Hi Anto2211,
    Please follow the thread: Black screen CC where this issue is already discussed and resolved.
    Let me know for any further query.
    Thanks,
    Ratandeep Arora

  • I have a 7th generation ipod, i have a problem with the pause/play button, it no longer works.

    I have a 7th generation ipod, i have a problem with the pause/play button, it no longer works.
    What does it take to make sure it works ????
    Thanks

    If you successfullt restore to factory defaults/new iPod and still have the problem then it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Zen Extra -problem with "add to Play " but

    Hi
    I have a creative Zen Xtra, bought it just a week ago, and liked it a lot, (Except the size ...)
    but i think i am having a problem with it. If I have to create a play list, while I am playing songs how to do it ?
    Lets say i am playing song aa from album AA
    i click on AA , and the select song aa and click on Play now it starts playing but now i want to add it to playlist , then i click on aa and in the menu that comes up i click on "Add to Play" but as soon as i click on the "black roller while) to select "add to play" I can see the selection on the previous menu (song aa ) moves to next line..
    Same thing happens if I have to add Album AA to play list, the cursor on the previous manu shifts one position below,
    And the song/alblum is never added to the play list.
    Do i have to do it only using PC ?
    that sucks ..
    let me know

    avoodi wrote:
    Hi I have a creative Zen Xtra, bought it just a week ago, and liked it a lot, (Except the size ...) but i think i am having a problem with it. If I have to create a play list, while I am playing songs how to do it ?Lets say i am playing song aa from album AA i click on AA , and the select song aa and click on Play now it starts playing but now i want to add it to playlist , then i click on aa and in the menu that comes up i click on "Add to Play" but as soon as i click on the "black roller while) to select "add to play" I can see the selection on the previous menu (song aa ) moves to next line.. Same thing happens if I have to add Album AA to play list, the cursor on the previous manu shifts one position below, And the song/alblum is never added to the play list.Do i have to do it only using PC ?that sucks .. let me know
    Basically whenever you make a playlist, it includes whatever is in your "selected music". So let's say you want to add an album to an existing playlist. Go into your media library, add your playlist ("Add to play"). Then add the album you want from the media library (also doing the "add to play" option). When you go into the "selected music" section, click in on the scroll wheel and "save as playlist"

  • PLEASE HELP - Serious problem with my Creative Zen Touch firmware

    Ok, so I finally decided that I would upgrade to the latest firmware version for my Creative Zen Touch. I knew that doing so would erase everything on it, so I backed up everything onto my computer's hard dri've. So from that standpoint, I'm in the clear.
    HOWEVER, during the upgrade process, my computer froze, leaving my precious MP3 player without ANY firmware. This then drove it into "recovery" mode, where I can either clean up, format, or reload firmware. I've gone through each of these options, but when I go to "reload firmware" my computer will no longer detect my Zen! I've tried reinstalling different driver versions, different firmware versions, etc. The bottom line now is that my mp3 player has no firmware, and my computer won't detect it.
    I feel like I probably need to go back to the basics. Unfortuantely, I don't have my installation CD with me. Can anyone post the initial installation file please? Thanks in advance!
    I really hope I can work this out, I don't know if I've gone a day without my Zen in the past two years!

    Simon, this is actually a common problem with the touch. Mine did it about a year after purchase, so I was safe to open it up and fix it. It is actually a really simple fix and is due to a loose connector. I know alot of other people on nomadness.net were having this problem, so I posted a solution here. Hope this helps!
    http://www.nomadness.net/modules.php?name=Forums&file=viewtopic&p=42838

Maybe you are looking for