Problems with upgrading firmware in Zen Micro 4
I am currently having a problem with upgrading the firmware on my Zen Micro 4 GB. The Zen Micro seems to hang right after the first reboot, therefore not finishing the whole upgrade. I am currently trying to upgrade to 2.2.02. It seems that whenever I try to reboot the Zen Micro while it is connected via USB, it hangs at the Creative Logo and I have to end up resetting the system. Oddly enough, I have a second Zen Micro that I was able to upgrade the firmware with no problems whatsoever. Any suggestions?
P.S. I do have Windows XP SP2 with WMP 0 installedMessage Edited by Hubmasterflex on 0-07-2006 04:23 AM
Try using reload OS in the recovery mode to erase the current firmware, then connect to the PC and reload. You take a risk doing this though as if the firmware won't reload from the PC you'll be left with an effecti'vely useless player, and you'll have to contact support to get a replacement.
Similar Messages
-
Problem with headphone jack on zen micro and customer support hel
I have had a zen micro for about a month now and i am very pleased with my purchase. BUT a few days ago the sound suddenly changed whilst i was listening to it. i found out it was a faulty headphone jack. i emailed customer support to arrange a replacement and the replied asking to send back information about my player then they would send me a returns number.i did that and im still waiting for the returns number 3 days later!
i was wondering if anyone else is experienceing the same problem as me and how long it takes for customer support to send you a returns number?
im afraid i will eventualy get a relpacement and the same thing will happen again. anyone got any advice on how to avoid the problem?Message Edited by alexkelly on 02-02-2005 09:0 PMThis happened to me as well after about a week. Like most portable devices I think the headphone jack is one of the weak points and can be easily jarred from its solder joints. I am taking extra care with the replacement Creative sent and I expect that it will not happen again.
As far as getting the replacement, I would recommend calling Customer Support directly and explain what the problem is and they should give you an RMA over the phone. Be sure to have the player in front of you as they will need the serial number that is on it. I was very impressed with the speed of service as well. I called them Monday morning, sent my Micro back after the phone call (I used Priority Insured Mail, be sure to insure it whatever you use) and they sent me a replacement that arri'ved the following Tuesday, just 8 days which I have only had one other company beat as far as service ever. Also be sure to backup everything on your Micro before sending it as you will probably not receive the same one back and I believe they format them on the way in the door for various reasons. Also they will tell you only send the the player back, keep all the accessories as you will only get a player sent back to you. Good luck! -
Problem with Upgrading Firmware of Solaris 10
I have X4500 running solaris 10 with 5.10 version. The ILOM version is 1.1.1 and I want to upgrade the firmware. I setup the TFTP server on my machine using the following link.
http://docs.sun.com/source/819-7247-10/app_tftp.html
I could install the tftp server and could transfer a file as well. When I use tftp localhost and use get command it works fine. But when I login to my ILOM port and give the IP address of my X4500 machine it say's connection timed out and firmware upgrade failed.
I use load -source tftp://134.197.38.228/ilom.X4500-1.1.8.ima.
Someone please help me with this. I have a problem using Web GUI and I have got only this option to upgrade.
Any help would be appreciated.
Thank youHave you upgraded the firmware with correct version number.If the firmware is not correct,you can get the problem like this.
Hard-reset the router for 2 minute,Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now,open the setup page and check. -
Problem with upgrading firmware on WRT54Gl
hello i have the WRT54Gl
and i upgraded the firmware from the defulat i think it wa 1.1 to 4.3 and after succesfuly upgrading i am entering to the router configurations and i dont have any bar to click on, nothing i cant choose any option and that from3 pc's,,
here is the print screen pf the thingHave you upgraded the firmware with correct version number.If the firmware is not correct,you can get the problem like this.
Hard-reset the router for 2 minute,Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now,open the setup page and check. -
Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues
Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs -
Problem with upgrade Extension Manager 6.0.4
Problem with upgrade Extension Manager 6.0.4, code error U44M1P7
What version of the Adobe Application Manager are you using? Which operating system are you using?
-
Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?
iphoto upgrading: Apple Support Communities
iphoto upgrade hangs: Apple Support Communities -
Problem with upgrade Windows 2003 to Windows 2008
Hi,
I have problem with upgrade Windows 2003 to Windows 2008 R2
When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall "adaptec storage manager" but I already remove this driver from the system and registry.
Any ideas to solve this problem?
My server it's IBM System x3500
RegardsNot sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned.
2. Uninstall IBM ServeRAID from the system, just in case
3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else.
5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker. -
Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1
have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected] -
I am having no problems with old firmware for my 27" iMac Quad i5. Should I update anyway?
As posted in another thread, after having my first ever screen flickers only after installing the 4850 firmware patch:
"Called tech support. She had me do a PRAM reset and since then I loaded 25 programs, many of which were busy doing things like playing music, using iSight, playing video - no more flicker or black screens. I expressed my doubts that the PRAM reset would help, but it appears to have been effective for this.
By the way, with 25 programs loaded and several active, I was able to use only 4 GB of this 16 GB machine. All 8 threads were busy but overall CPU use was modest most of the time. I think I taxed the GPU though and no problems." -
Cannot upgrade Firmware on Zen Mi
Just bought a Zen Micro yesterday, it came with the .0.03 firmware.
Wanted to upgrade to version 2 firmware because I used WMP and XP. Also would like to be able to drag and drop using windows Explorer.
However everytime I try to upgrade the firmware, the firmware upgrade application on the PC is waiting for the Zen to reboot even if it did. The player formats his dri've, then reboot, then waits forever.
I even unplugged the Zen after 30 minutes... everything is fine on the player, it still has the .0.03 firmware.
Any help would be appreciated.
StephaneIs the MediaSource detector on? If yes, try turning it off. Start MediaSource -> Tools -> Settings -> Detector.
Jason -
[Solved] Problem with upgrading polkit or filesystem
Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit" So I tried that a couple of times but I could never get pacman to finish and get past that. I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it). So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue. Fast forward to today and I go to upgrade my system. Among the 83 updates or so was polkit and filesystem. What do you know it gets stuck at "(15/83) upgrading polkit". Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem. I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
I tried re-installing polkit again and filesystem again but they continue to get stuck. I cannot "complete" the upgrade even though they show the appropriate version when I check.
Terminal
[507] shauder@arch-desktop [~] $ sudo pacman -S polkit
warning: polkit-0.107-4 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): polkit-0.107-4
Total Installed Size: 1.77 MiB
Net Upgrade Size: 0.00 MiB
Proceed with installation? [Y/n]
(1/1) checking package integrity [########################################################] 100%
(1/1) loading package files [########################################################] 100%
(1/1) checking for file conflicts [########################################################] 100%
(1/1) checking available disk space [########################################################] 100%
(1/1) upgrading polkit
/var/log/pacman.log
[2012-07-18 18:27] installed filesystem (2012.6-4)
[2012-07-18 18:27] installed findutils (4.4.2-4)
[2012-07-18 18:27] installed gawk (4.0.1-1)
[2012-07-18 18:27] installed gettext (0.18.1.1-4)
[2012-07-18 18:27] installed grep (2.13-2)
[2012-07-18 18:27] installed sed (4.2.1-4)
[2012-07-18 18:27] installed grub (0.97-21)
[2012-07-18 18:27] installed gzip (1.5-1)
[2012-07-18 18:27] installed gdbm (1.10-1)
[2012-07-18 18:27] installed perl (5.16.0-2)
[2012-07-18 18:27] installed openssl (1.0.1.c-1)
[2012-07-18 18:27] installed libsasl (2.1.23-9)
[2012-07-18 18:27] installed libldap (2.4.31-4)
[2012-07-18 18:27] installed keyutils (1.5.5-3)
[2012-07-18 18:27] installed krb5 (1.10.2-2)
[2012-07-18 18:27] installed heirloom-mailx (12.5-3)
[2012-07-18 18:27] installed inetutils (1.9.1-2)
[2012-07-18 18:27] installed iproute2 (3.4.0-2)
[2012-07-18 18:27] installed sysvinit (2.88-6)
[2012-07-18 18:27] installed initscripts (2012.06.3-2)
[2012-07-18 18:27] installed sysfsutils (2.1.0-8)
[2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
[2012-07-18 18:27] installed iputils (20101006-4)
[2012-07-18 18:27] installed jfsutils (1.1.15-3)
[2012-07-18 18:27] installed less (444-3)
[2012-07-18 18:27] installed licenses (2.9-1)
[2012-07-18 18:27] installed linux-firmware (20120625-1)
[2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
[2012-07-18 18:27] installed expat (2.1.0-1)
[2012-07-18 18:27] installed libarchive (3.0.4-1)
[2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
[2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
[2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-18 18:27] ==> Building image from preset: 'default'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [autodetect]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] ==> Building image from preset: 'fallback'
[2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
[2012-07-18 18:27] -> Running build hook: [base]
[2012-07-18 18:27] -> Running build hook: [udev]
[2012-07-18 18:27] -> Running build hook: [pata]
[2012-07-18 18:27] -> Running build hook: [scsi]
[2012-07-18 18:27] -> Running build hook: [sata]
[2012-07-18 18:27] -> Running build hook: [filesystems]
[2012-07-18 18:27] -> Running build hook: [usbinput]
[2012-07-18 18:27] -> Running build hook: [fsck]
[2012-07-18 18:27] ==> Generating module dependencies
[2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-18 18:27] bsdcpio: Failed to set default locale
[2012-07-18 18:27] ==> Image generation successful
[2012-07-18 18:27] installed linux (3.4.5-1)
[2012-07-18 18:27] installed logrotate (3.8.1-2)
[2012-07-18 18:27] installed lvm2 (2.02.96-3)
[2012-07-18 18:27] installed texinfo (4.13a-7)
[2012-07-18 18:27] installed groff (1.21-2)
[2012-07-18 18:27] installed libpipeline (1.2.1-1)
[2012-07-18 18:27] it's recommended to create an initial
[2012-07-18 18:27] database running as root:
[2012-07-18 18:27] "/usr/bin/mandb --quiet"
[2012-07-18 18:27] installed man-db (2.6.2-1)
[2012-07-18 18:27] installed man-pages (3.41-1)
[2012-07-18 18:27] installed mdadm (3.2.5-2)
[2012-07-18 18:27] installed nano (2.2.6-2)
[2012-07-18 18:27] installed ca-certificates (20120623-1)
[2012-07-18 18:27] installed libssh2 (1.4.2-1)
[2012-07-18 18:27] installed curl (7.26.0-1)
[2012-07-18 18:27] installed pth (2.0.7-4)
[2012-07-18 18:27] installed libksba (1.2.0-2)
[2012-07-18 18:27] installed libassuan (2.0.3-1)
[2012-07-18 18:27] installed pinentry (0.8.1-4)
[2012-07-18 18:27] installed dirmngr (1.1.0-4)
[2012-07-18 18:27] installed gnupg (2.0.19-2)
[2012-07-18 18:27] installed gpgme (1.3.1-4)
[2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
[2012-07-18 18:27] installed archlinux-keyring (20120622-1)
[2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
[2012-07-18 18:27] >>> to import the data required by pacman for package verification.
[2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
[2012-07-18 18:27] installed pacman (4.0.3-3)
[2012-07-18 18:27] installed pciutils (3.1.10-1)
[2012-07-18 18:27] installed pcmciautils (018-4)
[2012-07-18 18:27] installed libnl (3.2.11-1)
[2012-07-18 18:27] installed libusbx (1.0.12-2)
[2012-07-18 18:27] installed libpcap (1.3.0-1)
[2012-07-18 18:27] installed ppp (2.4.5-3)
[2012-07-18 18:27] installed procps-ng (3.3.3-3)
[2012-07-18 18:27] installed psmisc (22.19-1)
[2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
[2012-07-18 18:27] installed shadow (4.1.5.1-1)
[2012-07-18 18:27] installed eventlog (0.2.12-3)
[2012-07-18 18:27] installed syslog-ng (3.3.5-2)
[2012-07-18 18:27] installed tar (1.26-2)
[2012-07-18 18:27] installed usbutils (006-1)
[2012-07-18 18:27] installed vi (1:050325-2)
[2012-07-18 18:27] installed wget (1.13.4-1)
[2012-07-18 18:27] installed which (2.20-5)
[2012-07-18 18:27] installed dbus-core (1.6.2-2)
[2012-07-18 18:27] installed wpa_supplicant (1.0-1)
[2012-07-18 18:27] installed xfsprogs (3.1.8-2)
[2012-07-18 18:27] installed m4 (1.4.16-2)
[2012-07-18 18:27] installed autoconf (2.69-1)
[2012-07-18 18:27] installed automake (1.12.2-1)
[2012-07-18 18:27] installed binutils (2.22-9)
[2012-07-18 18:27] installed bison (2.5.1-1)
[2012-07-18 18:27] installed fakeroot (1.18.4-1)
[2012-07-18 18:27] installed flex (2.5.35-5)
[2012-07-18 18:27] installed mpfr (3.1.1-1)
[2012-07-18 18:27] installed libmpc (0.9-2)
[2012-07-18 18:27] installed isl (0.10-1)
[2012-07-18 18:27] installed cloog (0.17.0-2)
[2012-07-18 18:27] installed ppl (1.0-1)
[2012-07-18 18:27] installed gcc (4.7.1-4)
[2012-07-18 18:27] installed libltdl (2.4.2-6)
[2012-07-18 18:27] installed libtool (2.4.2-6)
[2012-07-18 18:27] installed make (3.82-4)
[2012-07-18 18:27] installed patch (2.6.1-3)
[2012-07-18 18:27] installed pkg-config (0.27-1)
[2012-07-18 18:37] Running 'pacman -Syy'
[2012-07-18 18:37] synchronizing package lists
[2012-07-18 18:38] Running 'pacman -Syy'
[2012-07-18 18:38] synchronizing package lists
[2012-07-18 18:39] Running 'pacman -S sudo'
[2012-07-18 18:43] Running 'pacman -S sudo'
[2012-07-18 18:44] Running 'pacman -S sudo'
[2012-07-18 18:44] installed sudo (1.8.5.p2-1)
[2012-07-18 18:45] Running 'pacman -S alsa-utils'
[2012-07-18 18:46] installed alsa-lib (1.0.25-1)
[2012-07-18 18:46] installed dialog (1.1_20120706-1)
[2012-07-18 18:46] installed libogg (1.3.0-1)
[2012-07-18 18:46] installed flac (1.2.1-3)
[2012-07-18 18:46] installed libvorbis (1.3.3-1)
[2012-07-18 18:46] installed libsndfile (1.0.25-2)
[2012-07-18 18:46] installed libsamplerate (0.1.8-1)
[2012-07-18 18:46] installed alsa-utils (1.0.25-3)
[2012-07-18 18:46] Running 'pacman -S alsa-plugins'
[2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
[2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
[2012-07-18 18:48] installed xproto (7.0.23-1)
[2012-07-18 18:48] installed libxdmcp (1.1.1-1)
[2012-07-18 18:48] installed freetype2 (2.4.10-1)
[2012-07-18 18:48] installed libfontenc (1.1.1-1)
[2012-07-18 18:48] installed fontsproto (2.1.2-1)
[2012-07-18 18:48] installed libxfont (1.4.5-1)
[2012-07-18 18:48] installed libpciaccess (0.13.1-1)
[2012-07-18 18:48] installed libdrm (2.4.37-1)
[2012-07-18 18:48] installed pixman (0.26.2-1)
[2012-07-18 18:48] installed libxau (1.0.7-1)
[2012-07-18 18:48] installed xcb-proto (1.7.1-1)
[2012-07-18 18:48] installed libxcb (1.8.1-1)
[2012-07-18 18:48] installed kbproto (1.0.6-1)
[2012-07-18 18:48] installed libx11 (1.5.0-1)
[2012-07-18 18:48] installed libxkbfile (1.0.8-1)
[2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
[2012-07-18 18:48] installed xkeyboard-config (2.6-1)
[2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
[2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
[2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
[2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
[2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
[2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
[2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
[2012-07-18 18:48] installed xorg-font-utils (7.6-3)
[2012-07-18 18:48] updating font cache... done.
[2012-07-18 18:48] installed fontconfig (2.8.0-2)
[2012-07-18 18:49] Updating font cache... done.
[2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
[2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
[2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
[2012-07-18 18:49] installed xorg-server (1.12.3-1)
[2012-07-18 18:49] installed xextproto (7.2.1-1)
[2012-07-18 18:49] installed libxext (1.3.1-1)
[2012-07-18 18:49] installed libice (1.0.8-1)
[2012-07-18 18:49] installed libsm (1.2.1-1)
[2012-07-18 18:49] installed libxt (1.1.3-1)
[2012-07-18 18:49] installed libxmu (1.1.1-1)
[2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
[2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
[2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
[2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
[2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
[2012-07-18 18:49] installed renderproto (0.11.1-2)
[2012-07-18 18:49] installed libxrender (0.9.7-1)
[2012-07-18 18:49] installed randrproto (1.3.2-2)
[2012-07-18 18:49] installed libxrandr (1.3.2-2)
[2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
[2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
[2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
[2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
[2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
[2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
[2012-07-18 18:49] installed inputproto (2.2-1)
[2012-07-18 18:49] installed libxi (1.6.1-1)
[2012-07-18 18:49] installed xineramaproto (1.2.1-2)
[2012-07-18 18:49] installed libxinerama (1.1.2-1)
[2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
[2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
[2012-07-18 18:49] installed mcpp (2.7.2-4)
[2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
[2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
[2012-07-18 18:49] installed xorg-xset (1.2.2-1)
[2012-07-18 18:49] installed fixesproto (5.0-2)
[2012-07-18 18:49] installed libxfixes (5.0-2)
[2012-07-18 18:49] installed libxcursor (1.1.13-1)
[2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
[2012-07-18 18:49] installed xorg-server-utils (7.6-3)
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
[2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
[2012-07-18 18:51] installed videoproto (2.3.1-2)
[2012-07-18 18:51] installed libxv (1.0.7-1)
[2012-07-18 18:51] installed libxvmc (1.0.7-1)
[2012-07-18 18:51] installed nvidia-utils (302.17-1)
[2012-07-18 18:51] In order to use nvidia module, reboot the system.
[2012-07-18 18:51] installed nvidia (302.17-3)
[2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
[2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
[2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
[2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
[2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
[2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
[2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
[2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
[2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
[2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
[2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
[2012-07-18 18:55] installed xorg-twm (1.0.7-1)
[2012-07-18 18:55] installed libxpm (3.5.10-1)
[2012-07-18 18:55] installed libxaw (1.0.11-1)
[2012-07-18 18:55] installed libxft (2.3.1-1)
[2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
[2012-07-18 18:55] installed xorg-luit (1.1.1-1)
[2012-07-18 18:55] installed xbitmaps (1.1.1-2)
[2012-07-18 18:55] installed xterm (281-1)
[2012-07-18 18:55] Running 'pacman -S dbus'
[2012-07-18 18:55] installed dbus (1.6.2-1)
[2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
[2012-07-18 18:56] installed ttf-dejavu (2.33-3)
[2012-07-18 18:57] Running 'pacman -S awesome'
[2012-07-18 18:57] installed libpng (1.5.11-1)
[2012-07-18 18:57] installed cairo (1.12.2-2)
[2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
[2012-07-18 18:57] installed libtiff (4.0.2-1)
[2012-07-18 18:57] installed giflib (4.1.6-5)
[2012-07-18 18:57] installed libid3tag (0.15.1b-7)
[2012-07-18 18:57] installed imlib2 (1.4.5-2)
[2012-07-18 18:57] installed libev (4.11-1)
[2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
[2012-07-18 18:57] installed lua (5.1.5-2)
[2012-07-18 18:57] installed libdatrie (0.2.5-1)
[2012-07-18 18:57] installed libthai (0.1.17-1)
[2012-07-18 18:57] installed pango (1.30.1-1)
[2012-07-18 18:57] installed xcb-util (0.3.9-1)
[2012-07-18 18:57] installed startup-notification (0.12-3)
[2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
[2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
[2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
[2012-07-18 18:57] installed awesome (3.4.13-1)
[2012-07-18 18:58] Running 'pacman -S rlwrap feh'
[2012-07-18 18:58] installed rlwrap (0.37-2)
[2012-07-18 18:58] installed giblib (1.2.4-5)
[2012-07-18 18:58] installed libexif (0.6.20-2)
[2012-07-18 18:58] installed feh (2.5-1)
[2012-07-18 18:59] Running 'pacman -S packer'
[2012-07-18 18:59] Running 'pacman -S lightdm'
[2012-07-18 19:01] Running 'pacman -S fakeroot'
[2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
[2012-07-18 19:08] Running 'pacman -S git'
[2012-07-18 19:08] installed perl-error (0.17018-1)
[2012-07-18 19:08] installed git (1.7.11.2-1)
[2012-07-18 19:08] Running 'pacman -S jshon'
[2012-07-18 19:08] installed jansson (2.3-1)
[2012-07-18 19:08] installed jshon (20111222-1)
[2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
[2012-07-18 19:08] installed packer (20120718-1)
[2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
[2012-07-18 19:10] installed polkit (0.105-1)
[2012-07-18 19:10] installed accountsservice (0.6.22-1)
[2012-07-18 19:10] installed dbus-glib (0.100-1)
[2012-07-18 19:10] installed sqlite (3.7.13-1)
[2012-07-18 19:10] installed python2 (2.7.3-2)
[2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
[2012-07-18 19:10] installed perl-xml-parser (2.41-3)
[2012-07-18 19:10] installed intltool (0.50.2-1)
[2012-07-18 19:10] installed libxml2 (2.7.8-2)
[2012-07-18 19:10] installed itstool (1.1.2-1)
[2012-07-18 19:10] installed iso-codes (3.34-1)
[2012-07-18 19:10] installed libxklavier (5.2.1-2)
[2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
[2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
[2012-07-18 19:14] installed lightdm (1.3.1-4)
[2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
[2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
[2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
[2012-07-18 19:15] installed bzr (2.5.1-1)
[2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
[2012-07-18 19:15] installed libxslt (1.1.26-3)
[2012-07-18 19:15] installed docbook-xml (4.5-5)
[2012-07-18 19:15] installed rarian (0.8.1-2)
[2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
[2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
[2012-07-18 19:15] installed gtk-doc (1.18-1)
[2012-07-18 19:15] installed atk (2.4.0-1)
[2012-07-18 19:15] installed compositeproto (0.4.2-2)
[2012-07-18 19:15] installed libxcomposite (0.4.3-2)
[2012-07-18 19:15] installed damageproto (1.2.1-2)
[2012-07-18 19:15] installed libxdamage (1.1.3-2)
[2012-07-18 19:15] installed shared-mime-info (1.0-1)
[2012-07-18 19:15] installed libtasn1 (2.13-1)
[2012-07-18 19:15] installed nettle (2.5-1)
[2012-07-18 19:15] installed p11-kit (0.12-1)
[2012-07-18 19:15] installed gnutls (3.0.21-1)
[2012-07-18 19:15] installed libdaemon (0.14-2)
[2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
[2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
[2012-07-18 19:15] ==> dbus needs to be running when you start it.
[2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
[2012-07-18 19:15] ==> configuration on dhcp-less networks.
[2012-07-18 19:15]
[2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
[2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
[2012-07-18 19:15] ==> twisted for avahi-bookmarks.
[2012-07-18 19:15] installed avahi (0.6.31-3)
[2012-07-18 19:15] installed libcups (1.5.3-5)
[2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
[2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
[2012-07-18 19:15] installed gtk2 (2.24.10-3)
[2012-07-18 19:15] installed gtk-engines (2.21.0-1)
[2012-07-18 19:15] installed icu (49.1.2-1)
[2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
[2012-07-18 19:15] installed orc (0.4.16-1)
[2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
[2012-07-18 19:15] installed libproxy (0.4.7-2)
[2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
[2012-07-18 19:15] installed glib-networking (2.32.3-1)
[2012-07-18 19:15] installed libsoup (2.38.1-1)
[2012-07-18 19:15] ==> aspell comes with no default dictionary
[2012-07-18 19:15] installed aspell (0.60.6.1-1)
[2012-07-18 19:15] installed hunspell (1.3.2-1)
[2012-07-18 19:15] installed hspell (1.1-2)
[2012-07-18 19:15] installed enchant (1.6.0-4)
[2012-07-18 19:15] installed geoclue (0.12.0-5)
[2012-07-18 19:15] installed libwebkit (1.8.1-1)
[2012-07-18 19:15] installed vala (0.16.1-1)
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
[2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:47] Running 'pacman -R lightdm'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
[2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
[2012-07-18 19:49] removed libwebkit (1.8.1-1)
[2012-07-18 19:49] removed geoclue (0.12.0-5)
[2012-07-18 19:49] removed enchant (1.6.0-4)
[2012-07-18 19:49] userdel: user lightdm is currently used by process 657
[2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
[2012-07-18 19:49] removed lightdm (1.3.1-4)
[2012-07-18 19:49] removed libxklavier (5.2.1-2)
[2012-07-18 19:49] removed dbus-glib (0.100-1)
[2012-07-18 19:49] removed accountsservice (0.6.22-1)
[2012-07-18 19:50] Running 'pacman -S chromium'
[2012-07-18 19:50] installed dbus-glib (0.100-1)
[2012-07-18 19:50] installed nspr (4.9.1-1)
[2012-07-18 19:50] installed nss (3.13.5-1)
[2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
[2012-07-18 19:50] installed libevent (2.0.19-1)
[2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
[2012-07-18 19:50] installed libxss (1.2.2-1)
[2012-07-18 19:50] installed desktop-file-utils (0.20-1)
[2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
[2012-07-18 19:50] installed chromium (20.0.1132.57-1)
[2012-07-18 19:50] Running 'pacman -Sy abs'
[2012-07-18 19:50] synchronizing package lists
[2012-07-18 19:51] installed rsync (3.0.9-3)
[2012-07-18 19:51] installed abs (2.4.3-2)
[2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
[2012-07-18 19:53] installed ca-certificates-java (20120608-1)
[2012-07-18 19:53] installed recordproto (1.14.2-1)
[2012-07-18 19:53] installed libxtst (1.2.1-1)
[2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
[2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
[2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
[2012-07-18 19:53] done.
[2012-07-18 19:53] when you use a non-reparenting window manager
[2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-07-18 19:53] /etc/profile.d/openjdk6.sh
[2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
[2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
[2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
[2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
[2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
[2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
[2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
[2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
[2012-07-18 19:53] installed gperf (3.0.4-4)
[2012-07-18 19:53] installed zip (3.0-3)
[2012-07-18 19:53] installed unzip (6.0-6)
[2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
[2012-07-18 19:53] installed lzo2 (2.06-1)
[2012-07-18 19:53] installed squashfs-tools (4.2-2)
[2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
[2012-07-18 19:53] installed libusb-compat (0.1.4-2)
[2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
[2012-07-18 19:54] installed erlang (R15B01-1)
[2012-07-18 19:54] installed sdl (1.2.15-1)
[2012-07-18 19:54] installed dri2proto (2.6-1)
[2012-07-18 19:54] installed glproto (1.4.15-1)
[2012-07-18 19:54] installed mesa (8.0.4-1)
[2012-07-18 19:54] installed esdl (2:1.2-1)
[2012-07-18 19:54] installed schedtool (1.3.0-2)
[2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed pngcrush (1.7.31-1)
[2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
[2012-07-18 19:55] installed repo (1.17-1)
[2012-07-18 19:59] Running 'pacman -S terminator'
[2012-07-18 19:59] installed vte-common (0.32.2-1)
[2012-07-18 19:59] installed vte (0.28.2-3)
[2012-07-18 19:59] installed libglade (2.6.4-3)
[2012-07-18 19:59] installed python2-cairo (1.10.0-1)
[2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
[2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
[2012-07-18 19:59] installed pygtk (2.24.0-3)
[2012-07-18 19:59] installed terminator (0.96-1)
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-07-18 20:00] synchronizing package lists
[2012-07-18 20:01] removed gcc-libs (4.7.1-4)
[2012-07-18 20:01] removed binutils (2.22-9)
[2012-07-18 20:01] removed gcc (4.7.1-4)
[2012-07-18 20:01] removed libtool (2.4.2-6)
[2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
[2012-07-18 20:01] installed binutils-multilib (2.22-8)
[2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
[2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
[2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
[2012-07-18 20:01] installed lib32-ncurses (5.9-1)
[2012-07-18 20:01] installed lib32-readline (6.2.003-1)
[2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-07-18 20:07] Running 'pacman -S ssh'
[2012-07-18 20:10] Running 'pacman -S ssh-keygen'
[2012-07-18 20:10] Running 'pacman -S openssh'
[2012-07-18 20:10] installed libedit (20120311_3.0-1)
[2012-07-18 20:10] installed dnssec-anchors (20120422-1)
[2012-07-18 20:10] installed ldns (1.6.13-1)
[2012-07-18 20:10] installed openssh (6.0p1-3)
[2012-07-18 20:11] Running 'pacman -S pbcopy'
[2012-07-18 20:11] Running 'pacman -S copy'
[2012-07-18 20:13] Running 'pacman -S gedit'
[2012-07-18 20:13] installed lcms2 (2.3-2)
[2012-07-18 20:13] installed libgusb (0.1.3-1)
[2012-07-18 20:13] installed gd (2.0.36RC1-5)
[2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
[2012-07-18 20:13] installed libieee1284 (0.2.11-4)
[2012-07-18 20:13] installed v4l-utils (0.8.8-1)
[2012-07-18 20:13] installed net-snmp (5.7.1-3)
[2012-07-18 20:13] NOTE
[2012-07-18 20:13] ----
[2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
[2012-07-18 20:13] installed sane (1.0.22-9)
[2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
[2012-07-18 20:13] installed colord (0.1.21-2)
[2012-07-18 20:13] installed gtk3 (3.4.3-1)
[2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
[2012-07-18 20:13] installed libpeas (1.4.0-2)
[2012-07-18 20:13] installed enchant (1.6.0-4)
[2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
[2012-07-18 20:13] installed python2-gobject (3.2.2-1)
[2012-07-18 20:13] installed dconf (0.12.1-2)
[2012-07-18 20:13] installed gedit (3.4.2-1)
[2012-07-18 20:15] Running 'pacman -S python'
[2012-07-18 20:16] installed python (3.2.3-3)
[2012-07-18 20:26] Running 'pacman -S xclip'
[2012-07-18 20:26] installed xclip (0.12-3)
[2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
[2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
[2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
[2012-07-18 20:37] installed openal (1.14-1)
[2012-07-18 20:37] installed lib32-openal (1.14-1)
[2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
[2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
[2012-07-18 20:37] installed swt (3.7.2-1)
[2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:50] The android group has been removed, install android packages as root.
[2012-07-18 20:50] installed android-sdk (r20-2)
[2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
[2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-07-18 20:54] The android group has been removed, install android packages as root.
[2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
[2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
[2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
[2012-07-18 21:10] Running 'pacman -S perl-switch'
[2012-07-18 21:10] installed perl-switch (2.16-1)
[2012-07-21 03:29] Running 'pacman -S flashplugin'
[2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
[2012-07-21 03:29] installed mozilla-common (1.4-3)
[2012-07-21 03:29] >>
[2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
[2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
[2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
[2012-07-21 03:29] >>
[2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
[2012-07-21 03:32] Running 'pacman -S libvdpau'
[2012-07-21 03:32] installed libvdpau (0.4.1-2)
[2012-07-21 14:53] Running 'pacman -S gedit-common'
[2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
[2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:00] Running 'pacman -S gtk-icons'
[2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
[2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
[2012-07-21 15:06] removed gedit (3.4.2-1)
[2012-07-21 15:06] removed python2-gobject (3.2.2-1)
[2012-07-21 15:06] removed libpeas (1.4.0-2)
[2012-07-21 15:06] removed iso-codes (3.34-1)
[2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
[2012-07-21 15:06] removed enchant (1.6.0-4)
[2012-07-21 15:06] removed dconf (0.12.1-2)
[2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
[2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
[2012-07-21 15:06] removed libsoup (2.38.1-1)
[2012-07-21 15:06] removed glib-networking (2.32.3-1)
[2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
[2012-07-21 15:07] Running 'pacman -R wxgtk'
[2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
[2012-07-21 15:07] Running 'pacman -R libxt libsm'
[2012-07-21 15:11] Running 'pacman -S ranger'
[2012-07-21 15:11] installed ranger (1.5.4-1)
[2012-07-21 15:32] Running 'pacman -S irssi'
[2012-07-21 15:32] installed irssi (0.8.15-6)
[2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
[2012-07-24 20:20] installed sublime-text (2.0.1-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
[2012-07-24 23:41] installed dropbox (1.4.11-1)
[2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
[2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
[2012-07-24 23:41] installed dropbox-daemon (0.8-8)
[2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
[2012-07-24 23:48] installed dropbox-cli (1-12)
[2012-07-24 23:49] Running 'pacman -S nautilus'
[2012-07-24 23:56] Running 'pacman -S ranger'
[2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:23] Running 'pacman -Sy'
[2012-07-25 00:23] synchronizing package lists
[2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
[2012-07-25 00:25] installed gconf (3.2.5-2)
[2012-07-25 00:25] installed libmng (1.0.10-4)
[2012-07-25 00:25] installed qt (4.8.2-3)
[2012-07-25 00:25] installed qtwebkit (2.2.2-1)
[2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
[2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
[2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
[2012-07-25 00:28] installed libpng12 (1.2.49-1)
[2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
[2012-07-25 00:31] installed spotify (0.8.4.103-1)
[2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 16:58] Running 'pacman -Syy'
[2012-07-29 16:58] synchronizing package lists
[2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
[2012-07-29 17:00] installed gsm (1.0.13-7)
[2012-07-29 17:00] installed lame (3.99.5-1)
[2012-07-29 17:00] installed libasyncns (0.8-4)
[2012-07-29 17:00] installed json-c (0.9-1)
[2012-07-29 17:00] installed libpulse (2.1-1)
[2012-07-29 17:00] installed libtheora (1.1.1-2)
[2012-07-29 17:00] installed libglapi (8.0.4-2)
[2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
[2012-07-29 17:00] installed libegl (8.0.4-2)
[2012-07-29 17:00] installed libva (1.1.0-1)
[2012-07-29 17:00] installed libvpx (1.1.0-1)
[2012-07-29 17:00] installed opencore-amr (0.1.3-1)
[2012-07-29 17:00] installed openjpeg (1.5.0-1)
[2012-07-29 17:00] installed rtmpdump (2.4-1)
[2012-07-29 17:00] installed schroedinger (1.0.11-1)
[2012-07-29 17:00] installed speex (1.2rc1-2)
[2012-07-29 17:00] installed x264 (20120705-1)
[2012-07-29 17:00] installed xvidcore (1.3.2-1)
[2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
[2012-07-29 17:00] installed libmms (0.6.2-1)
[2012-07-29 17:00] installed libzen (0.4.26-1)
[2012-07-29 17:00] installed libmediainfo (0.7.58-1)
[2012-07-29 17:00] installed recode (3.6-7)
[2012-07-29 17:00] installed enca (1.13-2)
[2012-07-29 17:00] installed a52dec (0.7.4-6)
[2012-07-29 17:00] installed libdca (0.0.5-3)
[2012-07-29 17:00] installed talloc (2.0.7-1)
[2012-07-29 17:00] installed libwbclient (3.6.6-1)
[2012-07-29 17:00] installed libcap-ng (0.6.6-1)
[2012-07-29 17:00] installed cifs-utils (5.5-1)
[2012-07-29 17:00] installed tdb (1.2.9-2)
[2012-07-29 17:00] installed smbclient (3.6.6-1)
[2012-07-29 17:00] installed libmad (0.15.1b-6)
[2012-07-29 17:00] installed fribidi (0.19.2-2)
[2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
[2012-07-29 17:00] installed faac (1.28-4)
[2012-07-29 17:00] installed faad2 (2.7-3)
[2012-07-29 17:00] installed mpg123 (1.14.4-1)
[2012-07-29 17:00] installed libass (0.10.0-3)
[2012-07-29 17:00] installed libbluray (0.2.2-1)
[2012-07-29 17:00] installed libcddb (1.3.2-3)
[2012-07-29 17:00] installed libcdio (0.83-1)
[2012-07-29 17:00] installed mencoder (35014-1)
[2012-07-29 17:00] installed libftdi (0.20-1)
[2012-07-29 17:00] installed libirman (0.4.5-3)
[2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
[2012-07-29 17:00] installed gpm (1.20.6-10)
[2012-07-29 17:00] installed aalib (1.4rc5-9)
[2012-07-29 17:00] installed jack (0.121.3-6)
[2012-07-29 17:00] installed libcaca (0.99.beta18-1)
[2012-07-29 17:00] installed xf86dgaproto (2.1-2)
[2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
[2012-07-29 17:00] installed mplayer (35014-1)
[2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
[2012-07-29 17:00] installed pms (1.60.0-1)
[2012-07-29 17:20] Running 'pacman -S netstat'
[2012-07-29 17:31] Running 'pacman -S ntfs-3g'
[2012-07-29 17:31] installed fuse (2.9.0-1)
[2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
[2012-07-29 17:45] Running 'pacman -S tsmuxer'
[2012-07-29 17:45] Running 'pacman -S tsMuxeR'
[2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
[2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
[2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
[2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
[2012-07-29 17:48] The tsmuxer package is licensed software.
[2012-07-29 17:48] You MUST read and agree to the license stored in
[2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
[2012-07-29 17:48] installed tsmuxer (1.10.6-12)
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
[2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
[2012-07-29 18:24] Running 'pacman -S openjre'
[2012-07-29 18:25] Running 'pacman -S jre'
[2012-07-29 18:25] Running 'pacman -S icetea-plugin'
[2012-07-29 18:27] Running 'pacman -S icedtea-web'
[2012-07-29 18:27] installed icedtea-web (1.2-1)
[2012-07-29 18:35] Running 'pacman -S ccache'
[2012-07-29 18:35] installed ccache (3.1.7-1)
[2012-07-29 18:50] Running 'pacman -S rtorrent'
[2012-07-29 18:50] installed libsigc++ (2.2.10-2)
[2012-07-29 18:50] installed libtorrent (0.13.2-2)
[2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
[2012-07-29 18:50] installed rtorrent (0.9.2-2)
[2012-07-29 18:52] Running 'pacman -S rutorrent'
[2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
[2012-07-29 18:52] installed php (5.4.5-1)
[2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 18:53] installed rutorrent (3.4-2)
[2012-07-29 18:53] Running 'pacman -R rtorrent'
[2012-07-29 18:53] removed rtorrent (0.9.2-2)
[2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
[2012-07-29 18:54] Running 'pacman -S rtorrent'
[2012-07-29 18:54] installed rtorrent (0.9.2-2)
[2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
[2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
[2012-07-29 18:55] installed apr (1.4.6-1)
[2012-07-29 18:55] installed unixodbc (2.3.1-1)
[2012-07-29 18:55] installed apr-util (1.4.1-1)
[2012-07-29 18:55] installed apache (2.2.22-4)
[2012-07-29 18:55] installed php-apache (5.4.5-1)
[2012-07-29 18:55] installed php-cgi (5.4.5-1)
[2012-07-29 18:55] installed php-xsl (5.4.5-1)
[2012-07-29 18:55] installed geoip-database (20120706-1)
[2012-07-29 18:55] installed geoip (1.4.8-2)
[2012-07-29 18:55] installed php-geoip (1.0.8-2)
[2012-07-29 18:55] installed screen (4.0.3-13)
[2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
[2012-07-29 19:03] installed mod_scgi (1.14-1)
[2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
[2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
[2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
[2012-07-29 19:46] Running 'pacman -S unrar unzip'
[2012-07-29 19:46] installed unrar (4.2.4-1)
[2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
[2012-07-29 20:00] Running 'pacman -S php-apache mysql'
[2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
[2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
[2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
[2012-07-29 20:02] Installing MySQL system tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02] Filling help tables...
[2012-07-29 20:02] OK
[2012-07-29 20:02]
[2012-07-29 20:02] To start mysqld at boot time you have to copy
[2012-07-29 20:02] support-files/mysql.server to the right place for your system
[2012-07-29 20:02]
[2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
[2012-07-29 20:02] To do so, start the server, then issue the following commands:
[2012-07-29 20:02]
[2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
[2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
[2012-07-29 20:02]
[2012-07-29 20:02] Alternatively you can run:
[2012-07-29 20:02] /usr/bin/mysql_secure_installation
[2012-07-29 20:02]
[2012-07-29 20:02] which will also give you the option of removing the test
[2012-07-29 20:02] databases and anonymous user created by default. This is
[2012-07-29 20:02] strongly recommended for production servers.
[2012-07-29 20:02]
[2012-07-29 20:02] See the manual for more instructions.
[2012-07-29 20:02]
[2012-07-29 20:02] You can start the MySQL daemon with:
[2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
[2012-07-29 20:02]
[2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
[2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
[2012-07-29 20:02]
[2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
[2012-07-29 20:02]
[2012-07-29 20:02] installed mysql (5.5.25.a-1)
[2012-07-29 20:49] Running 'pacman -Syyu'
[2012-07-29 20:49] synchronizing package lists
[2012-07-29 20:50] starting full system upgrade
[2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
[2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
[2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
[2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
[2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
[2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
[2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
[2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
[2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
[2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
[2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
[2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
[2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
[2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
[2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
[2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
[2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
[2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
[2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
[2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
[2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
[2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
[2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
[2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
[2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
[2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
[2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
[2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-07-29 20:52] ==> Building image from preset: 'default'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [autodetect]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] ==> Building image from preset: 'fallback'
[2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
[2012-07-29 20:52] -> Running build hook: [base]
[2012-07-29 20:52] -> Running build hook: [udev]
[2012-07-29 20:52] -> Running build hook: [pata]
[2012-07-29 20:52] -> Running build hook: [scsi]
[2012-07-29 20:52] -> Running build hook: [sata]
[2012-07-29 20:52] -> Running build hook: [filesystems]
[2012-07-29 20:52] -> Running build hook: [usbinput]
[2012-07-29 20:52] -> Running build hook: [fsck]
[2012-07-29 20:52] ==> Generating module dependencies
[2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-07-29 20:52] ==> Image generation successful
[2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
[2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
[2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
[2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
[2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
[2012-08-03 12:40] Running 'pacman -S filezilla'
[2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
[2012-08-03 12:40] installed libidn (1.25-1)
[2012-08-03 12:40] installed filezilla (3.5.3-1)
[2012-08-06 13:55] Running 'pacman -R openjdk'
[2012-08-06 13:55] Running 'pacman -R openjdk6'
[2012-08-06 13:55] Running 'pacman -R icedtea-web'
[2012-08-06 13:55] removed icedtea-web (1.2-1)
[2012-08-06 13:56] Running 'pacman -S jdk'
[2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
[2012-08-06 13:58]
[2012-08-06 13:58] The jre package is licensed software.
[2012-08-06 13:58] You MUST read and agree to the license stored in
[2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
[2012-08-06 13:58] Please relogin to include jre in your PATH.
[2012-08-06 13:58]
[2012-08-06 13:58] installed jre (7.5-2)
[2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
[2012-08-06 14:01]
[2012-08-06 14:01] The jdk package is licensed software.
[2012-08-06 14:01] You MUST read and agree to the license stored in
[2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
[2012-08-06 14:01] Please relogin to include jdk in your PATH.
[2012-08-06 14:01]
[2012-08-06 14:01] installed jdk (7.5-2)
[2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:15] Running 'pacman -R jdk jre'
[2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
[2012-08-06 14:17] removed jdk (7.5-2)
[2012-08-06 14:17] removed jre (7.5-2)
[2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:19] The jre package is licensed software.
[2012-08-06 14:19] You MUST read and agree to the license stored in
[2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
[2012-08-06 14:19] Please relogin to include jre in your PATH.
[2012-08-06 14:19] installed jre6 (6u33-b04)
[2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:21] The jdk package is licensed software.
[2012-08-06 14:21] You MUST read and agree to the license stored in
[2012-08-06 14:21] /opt/java/LICENSE before using it.
[2012-08-06 14:21] Please relogin to include jdk in your PATH
[2012-08-06 14:21] installed jdk6 (6u33-b04)
[2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
[2012-08-06 17:23] Running 'pacman -S gimp'
[2012-08-06 17:23] installed lcms (1.19-2)
[2012-08-06 17:23] Updating font cache... done.
[2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
[2012-08-06 17:23] installed libwmf (0.2.8.4-9)
[2012-08-06 17:23] installed libcroco (0.6.5-1)
[2012-08-06 17:23] installed librsvg (2.36.1-1)
[2012-08-06 17:23] installed babl (0.1.10-1)
[2012-08-06 17:23] installed gegl (0.2.0-2)
[2012-08-06 17:23] installed freeglut (2.8.0-1)
[2012-08-06 17:23] installed jasper (1.900.1-7)
[2012-08-06 17:23] installed gimp (2.8.0-2)
[2012-08-06 18:25] Running 'pacman -Sy'
[2012-08-06 18:25] synchronizing package lists
[2012-08-06 18:25] Running 'pacman -S yaourt'
[2012-08-06 18:28] Running 'pacman -Sy'
[2012-08-06 18:28] synchronizing package lists
[2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:29] Running 'pacman -Sy'
[2012-08-06 18:29] synchronizing package lists
[2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
[2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
[2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
[2012-08-06 21:51] removed jdk6 (6u33-b04)
[2012-08-06 21:51] removed jre6 (6u33-b04)
[2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
[2012-08-06 21:54] The sun-java6 package is licensed software.
[2012-08-06 21:54] You MUST read and agree to the license stored in
[2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
[2012-08-06 21:54]
[2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
[2012-08-06 21:54] installed sun-java6 (6u32-1)
[2012-08-06 21:59] Running 'pacman -Syu'
[2012-08-06 21:59] synchronizing package lists
[2012-08-06 21:59] starting full system upgrade
[2012-08-06 22:00] Running 'pacman -Sy'
[2012-08-06 22:00] synchronizing package lists
[2012-08-06 22:00] Running 'pacman -S yaourt'
[2012-08-06 22:00] installed yajl (2.0.4-1)
[2012-08-06 22:00] installed package-query (1.0.1-1)
[2012-08-06 22:00] installed yaourt (1.1-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
[2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
[2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
[2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
[2012-08-06 22:01] installed java-rhino (1.7R3-3)
[2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
[2012-08-06 22:01] when you use a non-reparenting window manager
[2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2012-08-06 22:01] /etc/profile.d/jre.sh
[2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
[2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:02] installed android-apktool (1.4.9-1)
[2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
[2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
[2012-08-06 22:05] The android group has been removed, install android packages as root.
[2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
[2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
[2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
[2012-08-06 22:08] installed libmtp (1.1.3-1)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
[2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
[2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
[2012-08-06 22:08] installed android-udev (1.3-4)
[2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
[2012-08-06 22:08] installed fastboot (20110628-2)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
[2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
[2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
[2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
[2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
[2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
[2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
[2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
[2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
[2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
[2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
[2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
[2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
[2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
[2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
[2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
[2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
[2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
[2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
[2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
[2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
[2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
[2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:18] Running 'pacman -Syu'
[2012-08-06 22:18] synchronizing package lists
[2012-08-06 22:18] starting full system upgrade
[2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
[2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
[2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
[2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
[2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
[2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
[2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
[2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
[2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
[2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
[2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
[2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
[2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
[2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
[2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
[2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
[2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
[2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
[2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
[2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-08-06 22:20] ==> Building image from preset: 'default'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [autodetect]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] ==> Building image from preset: 'fallback'
[2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
[2012-08-06 22:20] -> Running build hook: [base]
[2012-08-06 22:20] -> Running build hook: [udev]
[2012-08-06 22:20] -> Running build hook: [pata]
[2012-08-06 22:20] -> Running build hook: [scsi]
[2012-08-06 22:20] -> Running build hook: [sata]
[2012-08-06 22:20] -> Running build hook: [filesystems]
[2012-08-06 22:20] -> Running build hook: [usbinput]
[2012-08-06 22:20] -> Running build hook: [fsck]
[2012-08-06 22:20] ==> Generating module dependencies
[2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-08-06 22:20] ==> Image generation successful
[2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
[2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
[2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
[2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
[2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
[2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
[2012-08-06 22:23] Running 'pacman -S openjdk'
[2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
[2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
[2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
[2012-08-06 22:25] Running 'pacman -R pms'
[2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
[2012-08-06 22:25] removed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-06 22:26] installed pms (1.60.0-2)
[2012-08-06 22:26] Running 'pacman -S vlc'
[2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
[2012-08-06 22:26] installed sdl_image (1.2.12-2)
[2012-08-06 22:26] installed libdvdread (4.2.0-1)
[2012-08-06 22:26] installed libdvdnav (4.2.0-2)
[2012-08-06 22:26] installed libkate (0.4.1-3)
[2012-08-06 22:26] installed libtiger (0.3.4-3)
[2012-08-06 22:26] installed libebml (1.2.2-2)
[2012-08-06 22:26] installed libmatroska (1.3.0-2)
[2012-08-06 22:26] installed zvbi (0.2.33-4)
[2012-08-06 22:26] installed taglib (1.7.2-2)
[2012-08-06 22:26] installed libmpcdec (1.2.6-3)
[2012-08-06 22:26] installed libupnp (1.6.17-1)
[2012-08-06 22:26] installed libshout (1:2.3.0-1)
[2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
[2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
[2012-08-06 22:26] installed ttf-freefont (20120503-1)
[2012-08-06 22:26] installed vlc (2.0.3-2)
[2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
[2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
[2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
[2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
[2012-08-07 11:44] installed pacman-color (4.0.3-1)
[2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
[2012-08-07 11:44] installed packer-color (20120807-1)
[2012-08-07 11:50] Running 'pacman-color -S packer'
[2012-08-07 15:50] Running 'pacman -Syyu'
[2012-08-07 15:50] synchronizing package lists
[2012-08-07 15:50] starting full system upgrade
[2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
[2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
[2012-08-07 15:51] Running 'pacman -Sy'
[2012-08-07 15:51] synchronizing package lists
[2012-08-07 16:02] Running 'pacman-color -S crontab'
[2012-08-07 16:02] Running 'pacman-color -S cronjob'
[2012-08-07 16:02] Running 'pacman-color -S cron'
[2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
[2012-08-07 16:04] Running 'pacman-color -S cronie'
[2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
[2012-08-07 16:05] installed libesmtp (1.0.6-2)
[2012-08-07 16:05] installed esmtp (1.2-4)
[2012-08-07 16:05] installed procmail (3.22-5)
[2012-08-08 12:10] Running 'pacman -Sy'
[2012-08-08 12:10] synchronizing package lists
[2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
[2012-08-08 18:02] Running 'pacman -R pms'
[2012-08-08 18:02] removed pms (1.60.0-2)
[2012-08-08 18:02] Running 'pacman -Sy'
[2012-08-08 18:02] synchronizing package lists
[2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
[2012-08-08 18:03] installed pms (1.60.0-2)
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
[2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
[2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
[2012-08-08 18:36] Running 'pacman -R pms'
[2012-08-08 1shadowlurker wrote:
It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
auth sufficient pam_rootok.so
auth required pam_unix.so
account required pam_unix.so
session required pam_unix.so
password required pam_permit.so
You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
Doug piston had me try something that I think will help anyone else who has this problem. Try re-installing pambase and shadow. It generated back most of any I was missing.
Last edited by shauder (2012-11-03 00:55:19) -
What to do if new firmware for zen micro is not for you
Ok its pretty simple, takes long but it should work (never been tested)
Uninstall the new firmware (keep all your songs saved onto PC music library)Install the cd you were given with the zen micro.You'll have all your songs on your pc library ( i would reccomend clearing out you zen micro music library and just putting the pc music library songs on your zen micro from there) so just transfer all the files you want onto the zen micro and it should be running fine.please reply and tell me what happens.ZenmastertmlHi Prakash,
As per GAAP - FI general accepting account principal,
Balance is define as on date,
while transaction/P&L can define for perticular period date range.
Here, I guess you want to see balance as on 30.06.2011
and transaction for 01.06.2011 - 30.06.2011.
Am i right?
FYI, If you use 0BALANCE for any period, let say 01.06.2011 - 30.06.2011
then it will show balance for last day 30.06.2011
because its aggregation is SUM, LAST Value on time characteristics.
More detail on requirement will help us to provide you better solution.
Regards,
Ashish -
Problem putting music on my zen micro. Pleease help
Okay, so i'm having a problem syncranizing my music onto my zen micro for some reason.
I've had my my zen micro player for almost a year and i've always been able to sync music onto it with no problem but i haven't put any new music on it for about a week or so and yesterday i tried to put music on it and it said that my windows media player read an unknown error and wouldn't put any music on it. ( i use my windows media player to put music on it, by the way )
So i have no idea what to do. I tried to reinstal the program that came with the player but that didn't work either and even that program said it read an error when i tried to use it to put music on there.
I even downloaded a new version of windows media player and tried to put music on it but that told me:
"Windows Media Player cannot save the sync settings because your device is full. Delete some unneeded files on your device and then try again."
But that's prett much impossible since my zen micro can save upto 2,500 songs and i only have 89 songs on there, no more and nothing else.
So can someone please help me and tell me what's wrong and what i have to do to fix ityou should be able to download the drivers and software you need from this site- just go to Support>downloads and enter in your OS, model no., etc.
it will give a list of programs, I don't have a mac but you'll probably need to download at least the driver and maybe the mediasource organizer -
Problems with N73 firmware v 4.0726.2.0.1 update
Hello,
we have updated our N73 with the 4.0726.2.0.1 software update.
Since then, what happens is that reststarting the phone the music player automatically starts, although it is not a music edition.
Furthermore, it does not connect with our bluetooth gps device, which did work before the software update with Nokia maps perfectly.
Can you help?
Product code: 0529799
Thanks a lot in advance.
Best regards,
DoraI also had the same problem when upgrading to the newest firmware:
Firmware: V 4.0726.2.0.1 26-06-2007 RM-133 Nokia N73 (77.01)
Type: GPS
Vendor: Dell
Model: BT-309
BT version: 1.2 (I think...)
Status: NOT working
Tested with: TOMTOM Navigator 6.010 with gps driver 1.20
When trying to use the Dell BT-309 GPS it keeps trying to get a signal without any success. It finds the GPS, asks for the code, tries to pair off and then loses the signal back and forth forever.
The GPS worked fine with my Nokia 6620 so I know it's got to be something that they jinxed in the new firmware. I can now use my BT stereo headset but lost my GPS ability, which frankly costs much more than the headset and is far more useful to me
Maybe you are looking for
-
I never noticed till I seen another post about not being able to see who sent me a sms text. I have looked in the other options from the previous post but my 8530 does not apear to have those settings any other ideas? Carrier is Us Cellular if that
-
ALV GRID download truncates the last digit of invoice
Hi Experts, I am facing a production issue related to ALV grid download. When we click export to local file -> spread sheet, if it is downloaded to Excel file, invoice last digit is truncated. Can any body face this problem ? Please
-
LDAP "ServerListener" stops responding (Max number of connections reached)
Hi -- The last four work days, in the evening, our OAS 10G server stopped processing portal logon requests. The response to login requests was this message: Internal error WWC-00006 Unexpected error encountered in wwsec_app_priv.process)signon (User-
-
SD and FICO (in BW) Implementation for a Chemical Industry
Hi All, I Need help for implementing SD and FICO in BW. This is the first end to end implementation for me. So you guys can help me out HOW and Where to start the things? Any document will be helpful and will be rewarded. Regards, BW IGA
-
I don't understand the design of inner class private member
This is a question about the java language specification of inner classes. In the java langage specification document, we read If the member or constructor is declared private, then access is permitted if and only if it occurs within the body of the