Problems with usb drivers on windows 7 but only for internet tethering using usb.

Something got mixed up and now my iphone 4 using ios5 cannot transfer internet connection to computer using usb port. I got yellow mark in computer managment on iphone icon. I tried all that: http://support.apple.com/kb/TS1538?viewlocale=en_US but it didnt help i does not want to update the driver that is located in that directory.

Hi.I did not have it installed, but have installed it now. Is this a possible cause of my problems with the USB drivers install? Thanks a lot!- IceSony

Similar Messages

Qosmio X300-130: Problems with some drivers in windows 7 64 bit.

I have installed normally in my laptop windows 7 64 bit version. Before I continue with my main problems I am in the forum for answers and I found this [post |http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=232906&#232906] . How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
And now my problems:
1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
2. My media controller manager is not responding with the drivers for windows 7 64 bit. Should I have the bluetooth on? I tried with media player and VLC and it wasn't responding. How can I fix this?

>How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
Start the notebook and press F2. Then you should be able to access the BIOS.
There you should see the version number. Furthermore you can download the latest BIOS from the Toshiba European driver page.
>1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
The notebook supports the speakers: main x2 + tweeter x2 + woofer harman/kardon
All speakers are controlled by sound chip. So you need to install just the Realtek sound driver.
Further settings can be found in control panel Realtek HD audio manger.

Problems with putting drivers on windows through bootcamp

When i try to run the setup on windows for bootcamp it says x64 is not available on this comp model what do i do???

Use troubleshoot compatibility mode
navigate to the "BOOTCAMP64.msi" file instead.
Try to include in posts what Mac, version of Windows (obviously 64-bit version at this point).
Some Macs have trouble install 64-bit but you got through that so should work with a little extra.

When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.

In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library

Facing problem with USB controllerr & Bluetooth driver

Hi,
I have the problem with HP pavilion 15-r060tu...
I'm missing Universal Serial Bus (USB) Controller and Ethernet Controller...
i have switch os from by default ubantu to Windows 7 32 bit and
i got all drivers support but I cannot find usb controller them anywhere so
facing some problems with bluetooth drivers also.
plz help. thank you

No configuration or modification of system files is required. If the USB Bluetooth dongle is Mac compatible, just plug it in and open the Bluetooth system preferences pane.
Not all USB Bluetooth dongles are fully Mac compatible.

Problem with USB speed

Hi there,
I am new to MSI forum, and have some questions.
I have MSI K9NU Neo-V mainboard and have problem with USB speed . I have all the latest drivers installed and the latest BIOS for my mainboard but still have the problem that mainboard detects all USB devices like USB 1.1
MB MSI MS-7270 ver. 1 (K9NU Neo-V)
CPU AMD Athlon 4200+
VGA MSI 8600 GTS
Memory 2 x 512 MB DDR2 667 Corsair XMS matched Pair
PSU Gigabyte GE-R 460 V1
DVD-RW Pioneer DVR 112D
HDD Western Digital WD2500JS
OS Windows XP SP3 x86
Any idea about this?!
Thanks,
Alek

Quote from: Bas on 20-November-09, 21:57:20
Did you install all the drivers listed here?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=261
I also move this topic to the right area.
Yes, everything is installed and updated with latest drivers even from nVidia WEB for ULi chipset. the devices that we are talking about are USB removable storage like 8GB USB Flash Drive from Kingmax, 2GB Flash Drive from Xerox, 1 GB USB Flash drive from Kingston, USB case for 2,5" HDD from Spire ... I can count till tomorrow

K7N2 deltas mainboards have a problem with usb devices ??

Ok here is my problem..
I had installed WinXP Pro with SP1..
I got a 20 GB USB2.0 disk.i connected it on the both front or rear usb ports.
When i tried to transfer files to my usb disk or to my PC, in the middle of the copying, i got "Write Delay Failed" error and lost my usb connection..
I had to plug it out and in again..
Now, i have an DSL modem..Last night, i was disconnected from internet and my modem's lights gone..I plug it again, no lights..restarted my PC, also completely shutdown Windows XP..Again no lights..
Then, formatted PC and installed windows 2000 Pr and SP4, until now, my modem worked fine..But USB 2.0 ports are still no use for my usb disk...
In bios , it's enabled as USB 1.1+2.0..
I think this K7N2 deltas have a problem with usb 2.0 devices and Win XP Pro..
Some guys talking about, removing 9th wire earth, but couldn't understand which wire from where ? From mainboard or from usd device's cable ?
Those cables are fabricated, i think it's impossible ?
My processor is Athlon 2500+, ram Twinmos 512 DDR 400
Thanks for reply

I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09)

Notebook NC6400 HSTNN-C18C problem with grafic drivers

hello i have
NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

Hi,
It's a good machine isn't it. Unfortunately no official support:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
Please try:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
Vista driver on the first link may help.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problems with the sound in Windows

Hey everybody, hoping someone can help.
I'm working with Cubase in Windows with my mac and i have problems with the sound, but not all the time.
I have an M-Audio card connected and while i'm playing something in Cubase, the sound makes a digital distortion just for 10 seconds, and then again sounds perfect and then again comes back the digital crash, somekind of loop. So i was thinking that maybe was a problem with the drivers of my M-Audio card, but then i was playing a song in Winnamp with the built-in speakers and happens exactly the same, so i think it's a problem with the Mac drivers for Windows, i use the same audio card in MacOsX and i don't have problems
I have tried various display settings. I have no idea if this is just me or a common problem.
Thanks in advance...
MacBook Pro 2.16 GHz Intel Core 2 Duo Mac OS X (10.4.8)

This is not a BOOT CAMP Problem. It is a WINDOWS XP Problem. Either he didn't install the drivers for the sound card. (Which is Realtek High Definition Audio) or the Windows XP audio driver (WNMM) is corrupt.
Go to Device manager and under Sound, Video and Game controllers you should see a little yellow question mark under the WNMM driver. If this is the case he needs to uninstall the driver and reboot. It will then reinstall itself and should work properly after that.
MAC PRO Mac OS X (10.4.9)

Satellite M70-190 - problem with USB

Hi!
After uninstall Windows XP and BIOS update, i have a problem with USB ports. My USB flash drive does't work. Windows find it as USB flash drive, but i can't find it in "My computer"
So have anyone idea about this problem?
PS External HDD works perfect, as USB mouse, and USB WiMax modem.
Im hoping someone out there can help with this problem.

Is described issue the same on all USB ports?
I mean, I have Satellite M70-159 in front of me and since long time I use 8GB SanDisc and 2GB Toshiba USB stick and both devices are recognized properly.
I still use original Toshiba WXP installation (updated of course).

Downgrade to win7 problem with audio drivers. beats audio software for win7?

I recently purchased the HP Envy 700-074 from best buy. it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working.
here are the hardware ID's associated with the card
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
and here's a quick screenshot of the driver that is associating with it right now..
http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here?
the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

Hi, Paul.
I have similar problem here.
I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
Completely silent.
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

MSI K8N Diamond - Boot problems with USB devices attached.

Hi There.
I have been seeking the forums, but havent found the answer to my problem yet.
This is how it goes with ANY USB devices attached to either of the four USB ports on the Motherboard.
When i turn on my system, it hangs in the POST right after displaying the BIOS version (Which I have updated to 1.6) - I cant use my Keyboard to get to the BIOS setup.
Without USB devices attached...
The system boots without problems. And in Windows XP SP2 i can insert my keyboard, mouse etc. and everything works great - both USB 1.1 & 2.0 devices.
I have disabled the KB/USB.. in BIOS and I have disabled the "Boot on other device" option as well.
As I have found on this forum, a lot of people have problems with USB Front panel and D-Bracket (USB ports) connectors causing the system to hang - But my D-Bracket (USB connectors) and my front USB port is at this time DISCONNECTED - so this cannot be the problem.
The D-Bracket shows the "Bios Sign On" information - and stops at that point
Am I having a malfunctioning Motherboard here, or are there any solutions to this problem?
Please help me as I am desperate to have my system work properly.
Regards
Stieper

Well I have read about that somewhere in here, but my problem is NOT with an USB hub, but with any USB device attached to the motherboard's USB slots. It is driving me nuts to be honest!! I think it might be time for RMA
What do you say guys - is my Motherboard ready for RMA, or do I have to try something specific berfore sending it to the retailer??

Satellite M30X: Problems with USB 2.0 external HDD

Hi,
I have a Toshiba Satellite M30X. I recently bought myself a 200GB External Hard Disc. It has its own Power supply. If I connect it with USB 2.0 to my Laptop it happens to diconnect and reconnect permanantly. Sometimes it works, then I can put Data on the Disc. Then again it diconnects and reconnects many times. I've already tried another USB Port, but there is no difference. It's very strange, because I connected the External Hard Disc to many other Computers (Laptop and Tower) and it ALWAYS works!!! Its only with my Laptop it disconnects and reconnects the whole time. As I said, not always. Sometimes it works for like an half an hour or so then the action starts again ...
Can somebody help???
Greez Lutz

Hi Andrea
I really dont know why this happen. A friend of mine has the same problem with his desktop. While copy process runs the HDD is suddenly disconnected and there is also acoustic sound when the hardware is removed.
I have connected his HDD on my Tecra and there is no problem. I really dont know what the problem can be. Maybe there is some problem with OS because I can not believe that there is some contact problem with USB ports.
If you use many different USB devices at the same time maybe there is some conflict between few different drivers. Sorry but it is not easy to give some precise explanation.

Problems with shutdown, expose and window switching

Hi there,
Recently I've been having a few issues with OS X. First of all it wasn't shutting down properly -- the menu bar would disappear and it would look like it was going to shutdown, but it never did. I could move down to the dock (on auto-hide) and it would re-appear, at which point I can bring up a terminal window and use 'shutdown' to do the job. On startup I'd reset the PRAM, and then do a disk-check, but the problem keeps coming back.
Subsequently, I've also been having problems with expose and switching windows (i.e. command-tab). Namely, neither of them work. Expose won't fire from either hot corners or the keyboard, and if I re-launch the app from the Apps folder (without trying to kill it first, I should say), it does nothing. Cmd-tab gets interpreted as just tab, and the keyboard shortcut for dashboard also fails (although I can start the dashboard from the dock).
I read in another post about an invalid jpeg in the downloads folder being able to cause the Expose problem (seems like a most unlikely bug?). Anyway, I cleared all pictures from my downloads folder and functionality came back, but now it's gone again. It's really very frustrating as it makes moving between windows a lot more hassle.
Any thoughts would be gratefully received.
TIA,
Mat

This sounds interesting.
Can you post a copy for the rest of us to see?
As for actually helping you, and not just satisfying our curiousity, if you start cutting pieces of the code you will probably end up finding the source of the problem (and we won't have too big a program to handle). Since DSC is a likely suspect, you may want to start there.
Also, are you creating an installer and using that to install? If not, you may wish to try that.
Try to take over the world!

Problem With Captivate 4 and Windows 8

Hi,
I've a problem with Captivate 4 on Windows 8 projects :
The mouse is not tracked.
I've applied the last patch for this version (11/15/2011).
Is there another patch for this ?
Thanks a lot.

Hi there
I know this will come off as sounding snarky, but please know it's honestly not intended that way,
Windows 8?
I never was able to make Captivate 4 run successfully on Windows 7. So I'm not the least bit surprised to hear it has issues with Windows 8!
Personally, I'm thinking you are due for an upgrade to Captivate if you want it to work on Windows 8. But then again, I'm not even certain if Captivate 6 is Windows 8 compatible.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problems with usb drivers on windows 7 but only for internet tethering using usb.

Similar Messages

Maybe you are looking for