Problems with User names and Password

For some reason iWeb does not want to accept my user name and password: I enter it in the programm, update the whole website (which by the way didn´t occur incrementally), and then when I try to call up the page it won´t let me in - instead I have to give in the password and the user name over and over again with the result of the page being loaded just a "little" bit more each time but nothing happening!
Please help!
<Edited by Moderator>

David ~ You're posting in this 'Web '08 forum so this Apple doc about iWeb 1.x may not apply: _Password-protected sites don't publish to .Mac_.
For iWeb '08, passwords are case-sensitive and must use between 6 and 20 characters. They can include any combination of letters, numbers, and symbols, but can’t include spaces.
Post back confirming that you're using iWeb '08 and MobileMe — if you don’t publish your site to MobileMe password protection is unavailable.

Similar Messages

  • How to read the data from a file in another computer with user name and password login

    How to read read the data from a file in anohter computer which need to login with user name and password?

    duplicate post:  http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
    duplicate post:  http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
    duplicate post   http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

  • Log on the other computer with user name and password

    How to use labview to write a software to log on the other computer with user name and password?

    Jimmyzeng wrote:
    Nobody can help on this?
    Besides repeatedly asking the same question in thread after thread, you are not providing enough information to answer the question. You have been given answers already stating that operating systems do not make this very easy to do using programs for security concerns. In addition, the authentication process varies depending on what service you are communicating with. You really need to provide more information if you want to get meaningful answers to your questions.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • Locked PDF files will not open with user name and password. Help?

    I go to school online and our eBooks are in pdf format. I download them to my MacBook so that I can read them offline. When I download them, they open as they always did but, when I put my username and password in to unlock them, it tells me something about the file is edited and a copy will be saved but, it never opens the file. I have adobe reader on it, I am getting frustrated! I don't want to be logged into class every time I am studying material. Any ideas? Thanks in advance - this is my first Mac so, bare with me

    Not using netwok magic. I shut it down when it comes up.  I have tried using 192.168.1.1 but still will not accept user name and password.  I never changed the factory default and it just continues to ask for the user name and password.  Web utility site will not come up.  I have a wired desktop as my main computer and that is the computer I have been trying to access the utility from. 

  • I want to access the database with user name and password without con. info/udl

    hi to all,
    im doing project related with database... normally i'll connect ***.udl file to open database.vi.
    now what is my question is I want to open the database with the user name with password.... y i need this because once i run the program the program should ask username and password to open database for write/read operation. if its wrong user name and password means program should be denied... 
    can any tell how to access the database toolkit with the username with password....
    im using labview 7.0... 
    i think my question is clear....waiting for reply thank you in advance...
    pls see this attachment.....
    Regards,
    N. Srinivasan
    Attachments:
    access.vi ‏37 KB

    i have already read that link in the discussion forum...but im still have some confussion in... i attached file is so like to give user name and password..?
    and one more things can tell wat to do in ODBC and MDB and in UDL for password lock.. each time i run the promgram it should ask password to acces the database.. 
     thank you a lot for your reply.. 
    it will be more more useful if u clear my doubts clearly....
    Regards,
    N. Srinivasan
    Attachments:
    user=pass.PNG ‏35 KB

  • Http connection with user name and password

    Hello All,
    I'm trying to open http connection from my application on the 8100 device and i'm getting an error message saying that the port number isn't valid. I'm trying to add user name and password to the prefix of the url (e.g.: http://[email protected]/dir/)
    and the error message appears, but when i'm using the same url without the user name and password everything works great.
    Does anyone knows what's wrong or encountered this issue before?
    thanks.

    hello,
    I believe when you input the credentials, the website does a redirection to another port that is not supported by your internet access provider ?
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Secure Proxy with user name and password.

    I'm trying to develop a tool that can go out to the internet through a secure proxy with username and password, and download a file from a secured site, (https). Anyone have any experince with this, I've looked at a few things but nothing has really been helpful.

    Do you have an http proxy that requires authentication? If so, what type of authentication? Basic? Digest? NTLM if your proxy is on IIS?

  • Start Up Issue with user name and password

    I have just received a iphone I managed to put in a email address incorrect so I can't get into apps etc. How do I correct?

    NO !!
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • When I enter my user name and password for my e-mail account, the page won't open

    My e-mail account page won't open after I enter my user name and password on the log-in page. I have vcrified with Suddenlink that my user name and password are correct.

    Thanks Peter.
    Partial success in that I have been able to get mails onto the iPad  - however....
    Progress from a previous 'rumage' on problem discussions.    I have succeded in setting up the iPad so that it receives emails from the sky address under 'MAIL' on the iPad.    However trying to open in the 'usual' way   -  safari - then sky  -  then email  -  enter user name and password  -  I get the same result  -  it just returns to the log in menu for sky email with user name and password blank. 
    I had a previous problem with the sky mail ceasing to show recent mails, frozen in time on the iPad.   Somehow by trying some reset instructions I was able to 'unlock' the iPad and all was OK until it 'froze' again.    This time I clearly screwed up attempts to unlock, resulting in not being able to access email accounts via the Sky site !!

  • How to suffix user name and password remote pc in shutdown /s command

    Hi,
    We can shutdown a remote pc  using " shutdown /s /m \\ipaddress " command, only if password of remote pc is stored in windows credential  manager.
    But how to  add user name and password when i execute the command for example : when we map a share folder on our pc we use below command with  user name and password
    "net use * \\ipaddress\share password /user:username "
    can we give user name and password of remote pc  while we give shutdown command to turn off  a remote pc (without adding user name and password to windows credentials).
    Thanks in advance..........

    Hello Jayanth kundar,
    Based on my test, I can use the command shutdown /s /m \\10.157.21.77 to shutdown the remote computer when the have the same username and password.
    Do you mean that you want to add user name and password when you want to shutdown the remote computer?
    I can't find a user name and password in Windows Credential Manager, please share us a screenshot.
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • TS3276 I receive a pop up from ICal saying the server does not recognize me user name and password.  This started yesterday.  I have no problems with receiving or sending emails through Mail

    I receive a pop-up from ICal saying the server does not recognize my user name and password for my me.com email address.  This started yesterday and occurs about every 5 minutes or so.  There are no problems with receiving or sending email through Mail.  I did change me email password several days ago but have no problems sending/receiving since then.

    I fixed the problem.  I opened Preferences in ICal and entered my new password.  No more pop-ups

  • Problems with invalid user name and password

    We have a one week old MacBook 2.2GHz basic white model that is generally working well.
    However a problem has now arisen whereby on any attempt to shutdown or restart it won't accept the administrator user name and password, returning an 'invalid' warning. The issue seems to be the user name as the administrator password has worked OK in other situations. Naturally I have checked and re-checked the user name (which was in the form (first name followed by surname in upper and lower case) and it was OK (in any case it was being prompted automatically by the system.)
    I have subsequently changed the administrator name (to the form first name only in upper and lower) and the password as suggested by the following article:
    http://docs.info.apple.com/article.html?artnum=306876
    Nothing has changed. Can anyone help?

    HI Martin, a late post to confirm the solution from the last post by using the "RETURN" key works..
    (mouse click worked ok in Tiger 10.4.x I thought).
    Tis was a delight and so obvious after seeing these symptoms.
    I have posted this entry in case anyone else get's into this situation since OSX LEopard 10.5. Several people have encountered this issue where they may have:
    • LEopard 10.5.x installed
    • have 2 or more active users LOGGED into the OSX system via fast user / fastuser switching
    • request a SHUTDOWN or RESTART from an user
    • get a OSX request to supply administrator attributed user and it's associated password to validate SHUTDOWN | RESTART request,
    • have admin | root account verification failure of password after 'clicking'.
    After some months of frustration, it seems a simple PRESS of the "RETURN key" works!
    Simply, DON'T mouse click after entering admin user/password.... instead press "RETURN" key.
    fwiw.
    w

  • Can't sign in to google, says the user name and password are incorrect but they are not! No problem with IE

    I am trying to sign into my google account. I go through the process of resetting the password successfully. When I reopen Firefox, I have to sign in again (despite checking "stay signed in") and the user name and password are deemed not correct even though they are! There is no problem in Internet Explore. In Firefox, I have cleared the cache and cookies.

    Looks like you might have an old password saved in Firefox.
    The instructions here should be able to help you remove your saved ebay password.
    https://support.mozilla.org/en-US/kb/make-firefox-remember-usernames-and-passwords?#w_viewing-and-deleting-passwords

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

Maybe you are looking for