Problems with user on ABAP+JAVA WAS

Dear Sirs,
I have an ABAP WAS 7.00 where we have installed a JAVA WAS 7.00 as an add-on. The UME in the JAVA WAS is set up as read-only, and as far as I can understand all the user management is performed in the ABAP.
However if I create a user in the ABAP, this is not visible in the Java WAS.
Now I need my normal user to be visible in the JAVA WAS, in order to be able to log on to a Webdynpro application.
Does my user need any special authorization or roles in order to be visible in the JAVA WAS. I have a user J2EE_ADMIN in the ABAP WAS which is visible in the JAVA WAS as well, but I am unable to see what makes it special.
Best regards,
Jørgen

Hello again,
If I search with * I get a list of around 27 users, where around half of them has R3_DATASOURCE and the rest PRIVATE_DATASOURCE.
So this is what I think is so strange, it seems like the connection between ABAP and JAVA Was is ok, yet not all the users are visible in the JAVA was.
Best regards,
Jørgen
Message was edited by: Jørgen Ruud

Similar Messages

  • I was given a new phone because of a technical problem with my other. Everything was replaced because of iCloud but now it is telling me I do not have enough storage room on this phone to perform a back-up. Can I fix this?!

    I was given a new phone because of a technical problem with my other. Everything was replaced because of iCloud but now it is telling me I do not have enough storage room on this phone to perform a back-up. Can I fix this?!

    Why don't you call Apple tech support thru your provider. They will be able to help you in short order.
    PS - If you want help here you need to provide a little more information i.e. how much memory does your iPhone -4- have and how much free memory do you have after restoring from the cloud?

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • Problem with compilation of HelloWorld.java

    hi,
    getting problem with compilation of HelloWorld.java
    CLASSPATH--- C:\java
    PATH--- C:\j2sdk1.4.2_04\bin
    HelloWorld.java source code in: C:\java
    On cmd prompt:
    C:\java>javac HelloWorld.java
    error: cannot read: HelloWorld.java
    1 error
    pls help me with this
    rgds,
    sanlearns

    What does this command yield?
    dir HelloWorld.java

  • Problem with user-defined functions in XQuery String

    hello
    i've a problem with user-defined functions in XQuery String
    details are here (the code is not Human-readable via forum's embedded editor ?? strange)
    http://docs.google.com/Doc?id=ddqwddsr_21c96d9x
    thanks !!

    See
    michaels>  select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?      
                        return {$inputtype}
                     local:test_function("1","2")' returning content) o from dual
    Error at line 5
    ORA-19114: error during parsing the XQuery expression:
    LPX-00801: XQuery syntax error at '{'
    3                       return {$inputtype}
    -                              ^
    michaels>  select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?      
                        $inputtype
                     local:test_function("1","2")' returning content) o from dual
    O   
    2   
    1 row selected.

  • Problem with users disabling ARD client service

    I've got a problem and i'm not quite sure of the work around. I'm a PC guy by nature and can't quite figure this out.
    I'm having a problem with users disabling the ARD service from the sharing menu. Unfortunately users need to have admin privleges to do their work so I can't simply give them a standard account.
    I've hidden the ARD user account i created from the login window through Netinfo, but I need to find a way to stop users from shutting the ard service down.
    They don't seem to understand that the company requires that it be on the computer. Now, I'm the one who is set as the admin for ARD in the building, however we really just use it to rollout drivers, install packages, and its a lifesaver for remotely fixing problems with programs. The company didn't really buy it to spy on the employee's.
    Is there any way to hide the service from an admin level account? Or keep them from shutting it down?
    BTW, this would have to be done on multiple machines running both panther and tiger.
    Any help would be appreciated as I'm not quite sure where to start.

    First, as a matter of policy, let them know this service is active, and needs to remain active. If they disobey this instruction and turn it off, you have a human resources issue, not a technical issue.
    Second, there are very few enterprise users that need admin access to their machines. Oh, they ALL think they do, and there will be howling when non-admin status is first imposed, but we have 350 users in a publishing environment with less that 20 setup as admins. Those users are almost all superusers who assist others in a technical role.
    We have far fewer software problems like this and with ARD, IT can install/ authorize installation of software remotely should a user need that. It simply does not dramatically impact our users to have non-admin access. On the other hand, we recognize that a FEW users will need more access, and grant that on a case-by-case basis.

  • Problems with installation / de-installation of WAS AS 6.20

    Problems with installation / de-installation of WAS AS 6.20
    Hello,
    is anyone able to help me ?
    The installation (started from setup on cd-1 kernel) of sapdb ends by 30 % with following massage:
    start massage:
    Warning: adaextractlctool_nt_ada InternallnstallationDo
    SAPCAR returns with error 29.
    Error:  adaextractlctool_nt_ada InternallnstallationDo
    Phase failed.
    Error: Main {}
    Installation aborted.
    end massage.
    massage above percent-banner on the left down-side:
    no R3SETUP connected.
    In the dos-window in background have been a lot of status-lines during extraction of sabdb-files. Also there have been a successful-massage:
    "installation of sap db server finished successfully...." l.
    The massage above was shown direct after the massage: "Extracting SAP DB Tools Software"
    The Loop-back adapter is already installed (was the first ein did) and the files in win-folder 'hosts' and 'service' are correct (IP and so on)
    my system:
    Acer Aspire 5100
    Ram 1 GB
    HD 160 GB (140 GB frei)
    Win XP prof.
    How can I solve the installationproblem ?
    I think, I have to clean my system before starting a new installation-try, because there are already entries in my win-start-button:
    a) SAP DB Manager (but behind only a html-Link / no entry DeInstall)
    b) a second entry  SAP Front End (also behind just a html-link / no deinstall-button)
    Under system/controll panel -> software are no entries. So, I`m not able to deinstall the sapdb by win-controll-panel.
    And what is with registry-entries ? How can I delete the right entries in the registry. I dont know how to find them.
    Another way I tried: on the  SAP-CD 1 (kernel) with the file resume_setup.bat I get the same abort during installation I described at the top.
    Please, I need help, because I need the system as 6.20 for a trainning.
    Much thanks,
    Regards, Lars Stolpe
    MfG Stolpe

    obsolete question ...

  • Problem with user mapping

    Hello,
    We got a problem with user-mapping to a SAP system.
    We create a SAp system, and an alias to this system.
    We add a user mapping for the administrator (user, not group). Check for connector is OK.
    Now, we make the same user-mapping for a group.
    if the user also belongs to the group "administrator" this mapping works, otherwise this fail with a message <b>"com.sapportals.portal.ivs.cg.SystemNotFoundException: Got null system object for alias R3HR".
    </b>After checking, there is no user-mapping for the "administrator" group, nor for the roles that belong to that group, nor for the user.
    So, it seem that the alias is only visible for an admin.
    does any one got an idea ? we are on SP14, Linux.
    regards
    Guillaume PATRY

    HI Guillaume,
    The user mapping is available for both Admin as well as end users.
    Open your system from System Administration>System Configuration>System Landscape.
    In the property editor,in dropdown for property category,
    select the logon method as UID?password and User Mapping type to admin/user.
    Then you can create a Group,map the system alias for this group and add users to this group.
    Also,in the property editor for the system,from dropdown for display,select permissions , and add the group to asssigned permissions as READ ONLY and select the checkbox for ENDUSER.
    Hope,this resolves your problem.
    Regards,
    Siddhartha

  • I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

    I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

    Reset the PRAM.
    http://support.apple.com/kb/HT1379
    If that fails, reset the PMU.
    Scroll down the following page and click the G5 link for instructions:
    http://support.apple.com/kb/ht1939

  • Problem with user number

    Goodmorning, I have a problem with user number of my smartphone Blackberry Curve 8900: when I call a numer of my adress book, on the right,  appears a user number, that I don't know. Why dont'appears mine? I don't have buy this smartphone personally, but I had it (used) through the smartphone's owner...I think that the user number that appears on my display is his. How I can do to remove it?
    Waiting for an answer, thank you.

    Hello scricciolina90
    Welcome To Support Forums
    On or Curve 8900 from the Home screen > click Options > Click Advanced Settings > SIM Card > Highlight the phone number > Press the Menu key and click Edit SIM Phone Number > Check that field or Enter you Mobile number in that field .
    Good luck.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Field Guide 8 - Configuring the Database but problems with user id

    Iam just running into problem after problem with Chapter 8 dataproviders when I'am about 2/3 of the way through.
    I'am now trying to configure the "Login Data Structure" Page 363. After adding the derbyclient.jar file. Then opening DerbyLogin.java and thereafter clicking "Run" as instructed in the book I get this error.
    Error on url jdbc:derby://localhost:21527/sample
    ERROR: SQLException: Connection authorization failure occurred. Reason: userid invalid.
    org.apache.derby.client.am.SqlException: Connection authorization failure occurred. Reason: userid invalid.
    at org.apache.derby.client.net.NetConnection.mapSecchkcd(Unknown Source)
    at org.apache.derby.client.net.NetConnection.securityCheckComplete(Unknown Source)
    at org.apache.derby.client.net.NetConnectionReply.parseSECCHKRM(Unknown Source)
    at org.apache.derby.client.net.NetConnectionReply.parseSECCHKreply(Unknown Source)
    at org.apache.derby.client.net.NetConnectionReply.readSecurityCheck(Unknown Source)
    at org.apache.derby.client.net.NetConnection.readSecurityCheckAndAccessRdb(Unknown Source)
    at org.apache.derby.client.net.NetConnection.flowSecurityCheckAndAccessRdb(Unknown Source)
    at org.apache.derby.client.net.NetConnection.flowUSRIDONLconnect(Unknown Source)
    at org.apache.derby.client.net.NetConnection.flowConnect(Unknown Source)
    at org.apache.derby.client.net.NetConnection.<init>(Unknown Source)
    at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source)
    at java.sql.DriverManager.getConnection(DriverManager.java:525)
    at java.sql.DriverManager.getConnection(DriverManager.java:193)
    at asg.databuild.DerbyLoginDB.createLoginDatabase(DerbyLoginDB.java:52)
    at asg.databuild.DerbyLoginDB.<init>(DerbyLoginDB.java:38)
    at asg.databuild.DerbyLoginDB.main(DerbyLoginDB.java:25)
    BUILD SUCCESSFUL (total time: 5 seconds)
    It's telling me that user ID is invalid. I have no idea what my db user id is or how I can check it with the bundled database as there is no documentation I have found about that. Nor do I even know what I have to do to properly configure this app to properly work with the bundled database as the field guide says absolutely nothing about this!Message was edited by:
    tutorials

    Found a solution to this problem for anyone else having the same problem please go to thread: http://forum.sun.com/jive/thread.jspa?forumID=123&threadID=99634

  • EP + BW: Problems with user mapping in the portal

    Hi,
    I'm trying to connect the portal with the BW by using the report RSPOR_SETUP which is a step-by-step guide. The steps #1 - #11 seems to be ok but my problem is the 12th step, the user mapping/allocation maintenance in the portal.
    There is an error emerging (in BW): System failure during call of function module RSWR_RFC_SERVICE_TEST (System failure indicates normally an authentication problem between ABAP and Java)
    Another error is emerging by testing the connection in the portal. (System administration u2013 system configuration u2013 system landscape u2013 connection test: the first connection, the SAP Web-AS connection is ok but the second, connection test for connector, is not working.
    Especially the connection to the backend system with the defined connector is not working. The output is: u201CConnection failure. Check that single sign on is correct configured.
    On step 12 of the step-by-step guide I have to select a user in the portal, relate him to a system alias und maintain his technical username and password for the BW. I think here is the problem. Iu2019m able to select and save a system alias for the user, but Iu2019m not able to save his technical username and password. There is another error emerging (in the portal): u201CVerification of user mapping data for system SAP_BW failed, check credentials for errorsu201D, so Iu2019m not able to save the username and password.
    I think thats the my problem. the log file confirms that: "Did not find any existing logon data for principal...." & "No user mapping data available for principal...."
    I hope my problem description is understandable.
    Any ideas how I can solve the credentials problem to save the username and the password?
    Thanks in advance.
    Tan
    Edited by: Tan Yildiz on Jul 22, 2009 1:26 PM

    I could deploy some of the usage types, but there is an error regarding the BI-REPPLAN package. I think it's one of the very last errors that stands between me and a working EP - BI connection. There is a problem with the version. Could you check the log details, to find out more?
    Thank you.
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.3.7185 - 630]/>
    <!NAME[D:\usr\sap\BIP\JC02\SDM\program\log\sdmcl20090806164716.log]/>
    <!PATTERN[sdmcl20090806164716.log]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Aug 6, 2009 6:47:16 PM   Info: -
    Starting validation -
    Aug 6, 2009 6:47:16 PM   Info: Prerequisite error handling strategy: OnPrerequisiteErrorSkipDepending
    Aug 6, 2009 6:47:16 PM   Info: Update strategy: UpdateLowerOrChangedVersions
    Aug 6, 2009 6:47:16 PM   Info: Starting deployment prerequisites:
    Aug 6, 2009 6:47:18 PM   Info: Loading selected archives...
    Aug 6, 2009 6:47:18 PM   Info: Loading archive 'D:\usr\sap\BIP\JC02\SDM\program\temp\BIREPPLAN04_0-10005889.SCA'
    Aug 6, 2009 6:47:21 PM   Info: Selected archives successfully loaded.
    Aug 6, 2009 6:47:21 PM   Error: Unresolved dependencies found for the following SDAs:
    1.: development component 'bi/plan/helpers/table2'/'sap.com'/'MAIN_NW701P03_C'/'2846642'/'0'
    dependency:
           name:     'bi/alv/common'
         vendor:     'sap.com'
    There is no component either in SDM repository or in Deployment batch that resolves the dependency.
    dependency:
           name:     'bi/alv/ui'
         vendor:     'sap.com'
    There is no component either in SDM repository or in Deployment batch that resolves the dependency.
    Deployment will be aborted.
    Aug 6, 2009 6:47:21 PM   Error: No Software Component Archive (SCA) or Software Delivery Archive (SDA) selected. Select at least one.
    Deployment will be aborted.
    Aug 6, 2009 6:47:21 PM   Error: Prerequisites were aborted.
    Aug 6, 2009 6:47:22 PM   Error: Error while creating deployment actions. No Software Component Archive (SCA) or Software Delivery Archive (SDA) selected. Select at least one.
    Deployment will be aborted.
    Aug 6, 2009 6:47:23 PM   Info: -
    Ending validation -

  • Problem with XMLEncoder for complex java object i

    Hi All.
    My problem with XMLEncoder is it doesnt transfrom java objects without default no arguement constructor. I was able to resolve this in my main java object class, by setting a new persistence delegate, but for other classes that are contained in the main class, they are not being encoded.
    Thanks in advance for your answers

    Better to put this in java forum :-)
    Just check, if this helps.
    http://forum.java.sun.com/thread.jspa?threadID=379614&messageID=1623434

  • I had to uninstall firefox since it was causing so many problems with my computer. I was using the latest version 18. What is the problem?

    I have had nothing but problems since I installed the latest version of Firefox version 18. It hangs up my computer no matter what I am doing. Even if I am not using the browser. I uninstalled it three times and the problems just seemed to be getting worse. I finally uninstalled it and did not reinstall it again. I am not going to use it again until the problems are fixed. I also don't know what funmoods is or whatever it is that replaced my google home page. I don't like software deciding what services I should use. I have been a firefox user for over 15 years. I have never had problems like this before. I have switched to Safari. It works without interfering with the other tasks I am doing on my computer. I don't know what version 18 did but the previous version of firefox I was using was perfectly fine. I had no problems whatsoever with it. It appears as if this version was not sufficiently tested. Also my daughter is having the same problems with her computer and they all started with the new version. So it isn't just me. At least give us the option of going back to the previous version and asking us if we want to upgrade when a new one comes out. However, I have never had these problems in the past with any version of firefox I installed. I like the features of firefox but cannot afford to keep rebooting my computer. It seems that firefox gets hung up and then hangs the computer up and I can't do anything else even if I am not using it. It seems to stay on in the background and hang everything up. Please fix this.

    It most definitely is the browser that is causing most of the problems. I have used Firefox so long, I can't even remember. Maybe since its beginning. But today is a sad day. I gave up on it. I can't accomplish anything and end up spending hours troubleshooting. I see I am not alone. I am so sick of it "not responding." It's simply not worth it to spend so much time trying to make the thing work, so I can actually do something. Installed, removed, reinstalled numerous times, and I can't fix your software on my Win 7 Pro machine. No problems with IE or Chrome. So. as much as I hate Google Update, Chrome has won the test. Sad, sad day for me to lose Firefox, but it just does not work on the Win 7 machine. I don't have the same issues with the XP machine and have exactly all the same add-ons. Keep it up developers and you will have no Win 7 users at all.

  • In case of problems with SAP GUI for Java  ...

    Hello all,
    in case of having problems (errors, ABAP dumps etc.) with SAP GUI for Java, please create an OSS message on component BC-FES-JAV with information described in OSS note 326558
    http://www.service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700010521522001.
    This makes sure our official support channels get aware of your problem.
    Thanks and best regards
    Rolf-Martin

    Hello Rolf-Martin,
    i don't have access to this website to view the note.
    The version of the Suse libc is:
    GNU C Library stable release version 2.3.2, by Roland McGrath et al.
    Copyright (C) 2003 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
    PARTICULAR PURPOSE.
    Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
    Compiled on a Linux 2.4.20 system on 2003-03-13.
    Best Regards,
    Piotr Brostovski

Maybe you are looking for