Problems with using Canon LiDE 210 and OSX 10.7.4

I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
Does anyone have any experience of this issue, does anyone know how I might resolve it?
Many thanks,
Jeff

Similar Messages

Problem with use of COM+ Transaction and DB Transaction

Problem with use of COM+ Transaction and DB Transaction
We build a Web site that use sometime COM+ Transaction and sometime DB
Transaction. If we use a COM+ Transaction and a few seconds later we try to use
a Database Transaction (OracleConnection.BeginTransaction), we get the error
Connection is already part of a local or a distributed transaction
Of course the error does not produce everytime; it takes some try before we get
the problem. And of course, if i use pooling=false on the connection string,
the problem does not appear.
i run the Web page
and push the COM+ Transaction and DB Transaction one after the other for some
times and the problem should appear.
Environment: Windows server 2003, .Net Framework 1.1, ODP.Net 9.2.0.401,
Database Server 9.2.0.4

> Why in form builder can't I...
Is this happening at runtime or at buildtime? You'll need to provide more info on what you are actually doing that's causing the problem.
Regards,
Robin Zimmermann
Forms Product Management

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton

Update Re: Using Canon LiDE 210 with OS X 1.6.8

Hello,
I've read some older threads regarding this discussion but they must be closed since I couldn't add a comment. So, I thought it would be best to open a new one. I apologize if I'm treading old ground.
Here's my setup: MacBook Pro (mid-2010), Mac OS X v10.6.8 Snow Leopard, Safari 5.1.2. I needed a basic scanner, did research and everything looked good, so I bought a Canon CanoScan LiDE 210 scanner. All I need is to be able to scan documents (minimal graphics) to the MacBook, preferably in PDF format. Not really interested in scanning photos etc.
I just want to be careful and would like some clarification, please. So regarding installation, I've gotten three "recommendations/methods":
1) With the purchased Scanner, included was installation CD with instructions.
2) Emailed Canon Support and was told to download the latest driver and the MP Navigator EX from their website instead.
3) Read and referenced Apple Support Article HT3669 , which has been updated recently - February 15th, 2012.
Now, step #3 is my preferred selection, since it comes from Apple Software Update and the article lists the LiDE 210 as supported.
I also noticed on the other thread (that I could not comment on), that PAHU commented:
I have the LiDE200 and it works fine with Image Capture and Preview. The driver was included with one of the Canon updates hosted via Apple and part of Software Update. Checking the [latest Canon update|http://support.apple.com/kb/HT3669#canon] hosted by Apple, the LiDE210 and LiDE700F are both included as supported scanners.
This sounds exactly what I want to do for installation and use (Image Capture and Preview).
So before mucking up anything, if possible, could someone please confirm the step #3 approach and the supporting comments. (PAHU ?! ).
The way it appears, step #3 seems like minimal hassle, straightforward, and the best way to go. Also, do I really need this "MP Navigator EX", if I have Image Capture and Preview? I would prefer to avoid as much third party SW as possible.
I apologize for the lengthy post and thanks in advance for the help!
DMerz

Nice to read that it is all working. In response to the questions;
DMerz wrote:
I would love to have Adobe Acrobat Pro but funds won't allow it. You mentioned TWAIN based (Adobe Acrobat Pro) and making PDF's. What is the difference in creating a scanned PDF file via Image Capture vs creating one with Adobe Acrobat Pro? Or another way to ask is, what does the TWAIN driver do that the ICA doesn't? I googled TWAIN but got lost pretty quick. Sorry if that is a dumb question...
A PDF created by Image Capture is not a text searchable PDF. It is basically an image file (it is usually a TIFF with a Postscript header). So if you wanted to locate some line of text on the page, you would not have the ability to do so. In contrast, a PDF created in Acrobat will be text searchable, as the software will do character recognition (aka OCR). So if you wanted the means to locate content within each document, then you should OCR the scanned document. An Acrobat Pro will do this on the fly as you scan the document. Using Image Capture, you would have to scan the document first and then use some OCR package to convert the scanned image.
For the record, MP Navigator has an OCR function, but it is not as accurate as Acrobat Pro's version.
DMerz wrote:
One last question (I think - ). I'm still running Snow Leopard OS X v10.6.8. but probably will go to Lion soon. It looks like the Apple Support Doc says that the ICA driver I got through SW update will work with Lion OS X v10.7, so will the driver "disappear" when I do the Lion upgrade, causing me to have to setup the scanner again?
The driver won't disappear if you upgrade. The ICA driver package available from Apple is for 10.6 and 10.7. But it is sometimes advisable to remove the printers and scanner in 10.6 before you upgrade, or at least ensure you have the latest versions available before the 10.7 update. Given that you have just done this installation then you have the latest drivers so there should be no issue with the scanner after the Lion update.

Problems with FCP 5.1.4 and OSX 10.4.9

I upgraded to Tiger, installed the new FCP Studio and everything was working fantastic.
The next morning there was a software update for Tiger and FCP-5.1.4, it's been a nightmare ever since. When I restarted FCP would not recognize my Sony HDR FX1.
I had this problem once before with 4.5 and I fixed it by re-installing FCP and doing the upgrades, so that's what I did with 5 but this time there was a new problem. It wouldn't let me work on anything that I had opened since I did the software update, so I had to do the update again and then FCP wouldn't recognize my camcorder again on startup. If you pressed log and capture you could control the camera but no capture was possible.
So I re-set the easy set-up and presto! everything was fine and I worked productively for a few days.
But then I had to capture some SD from my Canon GL2 so I reset all the settings for DV NTSC and reset the easy set-up for DV NTSC but now FCP won't recognize my GL2 on start-up. If I click log and capture I can control the camera but no capture.
My next try to solve my problem was to downgrade back to my original 10.4.6 and FCP 5.1
That put be back to square one and everything works fine again except I am left with the problem that everything that I worked on after I did the update won't open, I get error 41.
Now I know this is because I am now trying to work on these projects with 5.1 after they were worked on in 5.1.4. But the problem is that everytime I update to 5.1.4 I can no longer capture or print to tape.
I tried the trashing the FCP prefs thing and the repairing permissions thing but I can't seem to solve the problem.
Has anyone else had any problems using FCP 5.1.4 and OSX 10.4.9?

Not sure how you tried to install 10.4.8 but if all
else fails you can always reinstall the original
operating system that came with your Mac using 'Erase
and Install' then upgrade it to 10.4.8 - probably in
stages.
Erase and install should be used as a last resort! A better option is to use the "archive and install" feature. It renames your old system folder and creates a new one for the OS you just re-installed. That way you don't have to reinstall everything, your user accounts and emails should all still be there, and if something doesn't work, you have your old system folder to pull things like preference files out of.
Eric

Problem with using Canon 5D Mark II footage with FCPX

Looking for advice ,
Avid have AMA link so you don't need to wast hard drive space, it conect directly to your raw footage and you can edit you don't need to transcode footage in order to edit. Does FCPX have that option ? The footage that I am using is Canon 5D mark II after import i am ending up with raw footage and transcode footage Dubuling use of my space on HD . I would like to be able to dump my Canon 5D footage on hard drive conect with FCP(without dubuling footage) and start editing. I am doing someting wrong ? Need advice .
Thanks
A

That is great thanks
My steps are these:
1. From my card I add DCIM folder to FCP Events folder.
2. Then I go to FCP X and import but then he is creating original media folder with (id) so then I guess I can delite DCIM since I can use for future editing that (id) raw footage .Is that corect? My hard drive is backing up everytime I add new footage to HD.
Thanks

SOLUTION: Are you having problems with using HDV, FCP X and iDVD?

If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem . . . iDVD squashes the image as shown in the screenshot below.
Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
There are 2 solutions to this problem:-
1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
2. Create an Apple Intermediate Codec preset for HDV. This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
What do you do if you haven't got Compressor?
Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

Ian,
Thanks for the tip!

Problems with using Spry photo gallery and Opera browser

Using Dreamweaver CS3. I'm working on a website for a friend.
It looks great in:
-IE 6 and 7
-Firefox
-Safari
But in Opera, the photo gallery I put in (uses spry to change
images as the user rolls over the thumbnail) pops up a login box in
Opera. It doesn't do this in any other browser and it works
perfectly in all other browsers.
WDYT? TIA, Steve

Using Dreamweaver CS3. I'm working on a website for a friend.
It looks great in:
-IE 6 and 7
-Firefox
-Safari
But in Opera, the photo gallery I put in (uses spry to change
images as the user rolls over the thumbnail) pops up a login box in
Opera. It doesn't do this in any other browser and it works
perfectly in all other browsers.
WDYT? TIA, Steve

Problem with using both group by and order by

example:
SQL> select * from orgchart;
NAME TEAM SALARY SICKLEAVE ANNUALLEAVE
ADAMS RESEARCH 34000 34 12
WILKES MARKETING 31000 40 9
STOKES MARKETING 36000 20 19
MEZA COLLECTIONS 40000 30 27
MERRICK RESEARCH 45000 20 17
RICHARDSON MARKETING 42000 25 18
FURY COLLECTIONS 35000 22 14
PERCOURT PR 37500 24 24
SQL> select team,
2 avg(salary),avg(sickleave),avg(annualleave)
3 from orgchart
4 group by team
5 order by name;
order by name
ERROR at line 5:
ORA-00979: not a GROUP BY expression
who can tell me where is wrong?
Thanks
Leo

Hi,
These are basic things...
what ever the Columns you are including the Select Clause must
taken into consideration when applying the group by clause..
without the selection in of name column how can you use in Order by Clause..
while using the group by..
Thanks
Pavan Kumar N

Canon lide 210 not recognized in yosemite. Latest driver downloaded

Since upgrading from Mavericks to Yosemite (10.10.1) I have lost capability with my Canon Lide 210 scanner and Jam XT bluetooth wireless speaker.
I have downloaded and installed the latest Canon driver to no avail. Any ideas? Both were working great before I upgraded to Yosemite.

The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

Problems with use cases in JDeveloper 11.1.1.1.0

Use cases made with JDeveloper 11.1.1.0.2 can not be used and edited in JDeveloper 11.1.1.1.0.
Same problems with Use Case Diagrams.
And it seems to be impossible to create new use cases in JDeveloper 11.1.1.1.0.
What are the differences between 11.1.1.0.2 and 11.1.1.1.0 if you look at use cases??

In JDeveloper 11.1.1.0.2 each use case has one file with the folllowing name: *.xhtml_usc.
In JDeveloper 11.1.1.1.0 each use case has two files with a names like *.xhtml_usc and *.uml_usc (after standard migration with JDeveloper). I can still edit the *.xhtml_usc files, but I have no idea what to do with the *.uml_usc files. I can only open a Property-editor, but the properties I see have no relation with the text I used in my original use cases . New use cases only have a *.uml_usc file and a Property-editor. In javadoc the new use case does not appear.
My question is: why do I have two different use case files in JDeveloper 11.1.1.0 and how can I use the Property editor??

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer no problem with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software.

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer without any problems with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software. I tried, phone activation, web activation, nothing is working. I have the serial number and my Adobe account information. Any suggestions?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium

Problems with using Canon LiDE 210 and OSX 10.7.4

Similar Messages

Maybe you are looking for