Problems with using highlighting feature in iBooks after updating to ios8. Please help.

Having problems with highlighting feature in iBooks after updating ios8 to my iPad. Please help!

I Too am having problems with iBooks highlighting the entire chapter if I touch the right edge of a page. It overrides my previous highlighting making my studying useles. It's terribly frustrating! iOS 8 has been a big,big problem. Apple has to fix this. There should be a way to undo it. It's a terrible mess.

Similar Messages

Does anyone have a problem with opening PDF files in iBook after updating the program recently

I need to try to open the pdf file a few times before it goes in iBook.
It is making me look like a fool cos I use iBook for my presentation to my clients

I'm presumably having a similar problem with pdf's in ibook. It seemed to work fine until about two updates ago. We're using ipad II's with ibook (latest version as of today) for our board of director's reports. These are sometimes several hundred pages and password protected pdf's. Now the more whiney members of the board are *******' at me, so I need to find a solution relatively quickly. Is there a way to back off the updates?
What it does.
When a PDF is chosen to open from the library, ibook open a "blank" file -- showing only the ibook background.
One can try closing and re-opening the PDF and after three or four times it'll open -- seems to be random.
These PDFs are created in Adobe Acrobat 9.

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help...

Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help?

What battery life are you getting? Is it short when you are using the iPod? When it is sleeping?

I'm trying to update my ipod touch but every time it downloads its fine until it processes it and it says it has a problem with my connection but my firewall is off?? Please help.

but every time i try to its fine until it processes it and then it says it has a problem with my connection but my firewall is off?? Please help.

I'm having the same problem trying to update my iphone 4(Just got a replacement), I also have firewall off...Hopefully someone can help. Mine says error -3259

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP
Hp mini 110 1140el

Yes bios password, i forgot my windows password so im trying to reset to manufacturing settings but keeps asking me for bios password... Please help

Problems with iMessage syncing to multiple devices after update

After updating to iOS 6.1.3 & OS 10.8.3 I can no longer send/receive iMessages from my cellular number. iMessage won't sync between phone & computer. Thoughts?

I found an answer thanks to
Ryneeev
Re: iMessage iMessage Waiting for activation Help
Mar 10, 2012 6:07 PM (in response to Mezoabo)
Don't waste time with all of that crap....
Just update your date/time settings:
Settings
> General
>> Date & Time
>>> Set Automatically: Slide "ON"...If it's already on, then slide it off, chill for a bit (maybe restart it), then slide it back on.
I literally* just did this, saw a link for this thread, and figured i'd come see if it worked for you. Mine hasn't worked since early January and for a while I wasn't getting texts from some other iPhone users either.
I have an iPhone 4, but I assume it will still work for you. I also have iOS 5.1 (just updated after plugging into iTunes on my mac), so that may make a difference, but I think it's just a network thing. When you disable "Set Automatically" for time, I figure that you are also denying access to a part of the network that is necessary for iMessage.
**EDIT**
I also forgot to mention that, despite Apple's excluvisity, you still need to rely on an internet connection to use this little feature. After you activate, it will even have an option to send as a regular text (SMS) when iMessage isn't available (when there is no or very little internet). I'm assuming that sliding to "no" will just save the message until you connect again.

Problem with login in to nokia store , after updat...

Can anyone help me, after update to belle , my n8 wont log on to nokia store.

Hey RadeJuve, Welcome to the Nokia Forums.
Please try download Store QML from Betalabs and try log in.
If this does not work please visit the Nokia Website or call your local Nokia care line and try reset your password and try relog in.
I hope this helps and your issue is resolved swiftly.
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

ZEN micro: problem with song/album/title/genre renaming after update - pls he

hi!
after updating my zen micro to the new firmware (playforsure) and the necessary software update of the media source organizer - i wasn?t able to rename the title on the player - like before the update: it'ss only possible to rename them one by one and not e.g. a full album (genre).
BTW: why has the user interface changed that much - all songs i?ve arranged before the update had to be rearranged and that isn?t possible anymore in the way it was before...
thx

You can try these two:
http://www.mp3tag.de/en/index.html
http://www.snapfiles.com/get/godfather.html
If they're not to your liking, try Google. These are not the only ones, but they're good (and free). Tag & Rename is also very good, but it costs a few bucks.

Problems with billing info in app store after updating my iphone 4s

i just updated my iphone and all my apps were gone, when i try to download one, it says i have to review my billing info and its all ok and my bank account has funds available. it says the security number is incorrect but it is not. can anyone help me please

Same here. No 3G connectivity on iPhone 4S after update to iOS 8.0.2

There's video problems with my Zen Vision:M already (M video cable related) Please help

Some background...
System:Windows XP with Service Pack 2.
Player: Brand new Creative Zen Vision: M with no firmware updates.
My Zen Vision:M has a problem (besides the scratch and fingerprint attracting top surface): It won't play videos on a TV screen when the M Video Cable (also from Creative) is linked to it anymore. It's only been a few hours...
I had the cable already, and got the player today. I let the player charge to /4th of a battery while I was setting up all the software. I ran the software programs just to take a peek, only changing the name of my player (to my name). I used Winamp 5.3 to put a music track on the player to test it. After that, I hooked it up to the VCR in my room through the white and yellow A/V plugs in front. It worked just fine. It to the tv a little large, but I was okay with it.
Later on today, the new AC charger I ordered came in the mail (Player came through UPS, charger through USPS). I looked at my old charger (Creative Zen Touch) and realized it would work with the plug-in part of the sync unit at the bottom. I tested it for a minute and it did. I still took it out and tried the new one. This is where, I think, something happened. I had to press the sides to get the thing in, and it was hard to come out. Everything still fit just right, and nothing seemed to be wrong. I used my old charger as I added more of my music library. Now it was on to videos. I had to convert the first two test vids (they were .wmv), but they played on my player fine. I put a bigger .wmv file onto the player to see if it had to convert it, and it did. It still played on the player. When I go to hook it to the TV with the A/V cord again, there was nothing but a black screen with the occasional diagonal scan line. The sound is still there.
Besides quirks with the navigational system, the player is still great for music and video. Still, I needed no video capability, and one of the things that made the ZVM a buy for me was watching my vids on the big screen. I'd return this for a second try, but I want to know if this is a recurring issue with you guys and if there's something I can do to fix it before a return. Did I mess with a setting? Should I get new firmware? Did I do wrong using my old charger? If any of you have an answer, or need more info on my situation, please let me know.
And BTW, does anyone know of some better software for organizing files on the ZVM? I used Winamp for my Zen Touch and the music on my ZVM, but videos are another ballpark. I can't transfer a video from one folder to another folder (assuming both folders are on the ZVM). Not to mention the music I transferred using Winamp isn't even showing up in Windows Media Player. I think I need a different program altogether.

I have got a new Creative Zen Vision W and getting the same problem....when i attach to the tv then i am able to hear the audio content and the video does not show.Are we missing something ? or is it a problem with the player. Also the software provided with the Zen converts small .vob files to .wmv when ever the size is large it gives an error 'conversion?unsucessful'.Any body facing similar problems please help.

Problem with iTunes since upgrade. Won't sync properly. Please Help!

Ever since I have updated iTunes to 7.1, when I try to add songs onto my iPod, I get a message reading: The iPod "Sheri's iPod" cannot be synced. The required file cannot be found.
My sister just bought the 8gig and out of 1600 songs, it accepted 2 songs. Please help!

Excuse the length of this but I felt detail was essential to hunting this down.
I must add my voice to this thread - seems one of several hundred that remains unanswered and I am fed up with dealing with this. If anyone has a thought I would welcome it. The search engine has no useful results to offer that I have been able to find.
Have a 20GB 4th Gen. iPod. Approximately 4100 songs - 18.2 GB in Library. Consistently after restoring with latest download as of this writing Apr.2 2007 experiencing again what I have been struggling with for weeks with this; As of today after a complete low level formatting of the hard drive - fresh reinstallation of Windows XP and all apps from scratch! 14 hrs of work dear apple folk, Having run a Complete virus check with Kaspersky IS 6.0 (trial), eTrust IS (Trial), and Norton IS 2007, Spy sweeper, Hitman Pro 2, Root kit revealer and a few others I am relatively convinced that there are no mal-spy wares on the system or iPod.
My iTunes library is on another physical drive. I have had no issues syncing from this drive when this did work.
Tried to reinstall the original iPod/iTunes software as per the disk shipped with the iPod # 2Z691-5715-A it failed at 99% to load due to an MSI error. - This confounded me.
Tried sync again using the most recent version of iTunes/QT and as previously posted by others without reply and experienced many times, repeat-many times over, have had the sync stall at no consistent point though roughly anywhere from 700 -1700 songs reportedly having been transferred only to stall. The iPod transfers only play lists no songs are transferred or listed though upon reboot and reattachment it shows data other than audio present but is obviously corrupted and the chkdsk message appears. Chkdsk finds no physical errors and I'm back to the restore loop. The iPod is restorable under Windows most of the time. Sometimes it is unable to do so. I have the luxury of a MacG4 Powerbook but my HD can't store those songs as it is for work use only but iTunes reformats it as a windows iPod or sometimes I have gone to restore it to Mac and then re-restore it to Windows format again on the PC. This I think eliminates the possibility that it is an issue with the USB connector or fire wire cables. I should be clear all sync is done via USB on the PC.
I have tried this on both the separate USB card installed on the system as well as through the USB ports available on the motherboard. Problem remains consistent.
I have experienced occasionally but for the most part infrequently, a report from my Konica/Minolta 2400W Colour Laser printer monitor - connected by USB on the Motherboard USB port, a sudden loss of communication with the printer preceding the iTunes sync stall. I have yet to try with the printer turned off and the monitor software removed but will report results in a further post - though this has never been a problem in the past.
Stall means that iTunes shows the sync in progress but no advancement from the song it is stuck on for hours. Task manager reports that the CPU is engaged at nearly fully utilization varying from 88 -99% of available resources. From iTunes an attempt to eject the iPod stalls with the eject button in pushed down state and hangs - the only way to proceed is to physically disconnect the iPod and close iTunes from the task manager. I have tried reducing the priority level of iTunes and the iPodhelper to see if I could buy time to eject the iPod without corruption but to no avail. Consistently, iPodhelper service and itunes.exe remains open even though the window closes. Of note those services remain running despite efforts to shut them down through task manager. This lead me initially to believe that the software was hijacked by a virus root kit or other malware but I have been unable to find any evidence to support that notion.
Further - i tried after restoring the iPod for the umpteenth time to try another software Media monkey. It too experienced the same bloody problem stalling out through the sync at 300 songs or so and same result with task manager unable to close process despite window being closed.
My conclusions:
Problem exists with iTunes software or some yet undeterminable windows process;
a) USB communications seems fine as am able to restore iPod through connector. Windows XP Pro detects iPod as a drive in explorer.
b) Song Database is fine and iTunes will play everything on hard drive(s) and in library.
c) iPod is okay - able to sync and list a few sample songs off MAcG4 Powerbook when formatted Mac or PC.
d) The R's all work - iPod reports no diagnostic issues
e) No viral, spy ware, root kit or malware detected after comprehensive scanning.
So what next???? I am completely at a loss... and missing my music..

Problem with ipad overheating........please help

im having a problem with my ipad, it's an ipad 1st gen 3g version.
The problem is that it is overheating, on the back around the left corner ( right if you are looking at the back)
it can only be used for about an hour then over heating happens.
i have been told this could be the battery needs replacing, so was wondering whats your thoughts on this.
any advice is appreciated.

iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Issues with game center after updating Ipod! Please help

After updating my daughters Ipod touch it wouldn't let us login to her game center account. Is there a way to look up her apple id for game center just by her game center name and nickname? When we login with her email address she had to create a new nickname and everything however we have previous emails from friend requests. Can anyone help us? I don't know what else to do she doesn't want to loose all the games that she has been playing for months. It's weird how it says her email is a new apple id when that is what she used before to create her game center account. All help appreciated. Thanks.

Try holding down the sleep/wake and home button until iPhone shuts off. Then hold down the home button while plugging into your computer. Your iphone is now in recovery mode. iTunes will detect this, and you can attempt to restore/update from there.
Best of luck.

Problem with JSTL 1.0.6 in WLS 8.1.4 - Please Help

I am trying to use JSTL 1.0.6 in WLS 8.1.4. Here are the steps I followed:
 
 Step 1:
 Copied the following jar files to WEB-INF/lib directory: 
 - jaxen-full.jar 
 - jdbc2_0-stdext.jar 
 - jstl.jar 
 - saxpath.jar 
 - standard.jar 
 - xalan.jar 
 - xercesImpl.jar 
 - xml-apis.jar 
 
 Step 2:
 Imported JSTL into my one-and-only JSP page as follows: 
 <%@ page contentType="text/html;charset=UTF-8" language="java" %>
 <%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
 <%@ taglib prefix="c_rt" uri="http://java.sun.com/jstl/core_rt" %>
 <%@ taglib prefix="x" uri="http://java.sun.com/jstl/xml"%>
 <%@ taglib prefix="x_rt" uri="http://java.sun.com/jstl/xml_rt" %>
 <%@ taglib prefix="fmt" uri="http://java.sun.com/jstl/fmt" %>
 <%@ taglib prefix="fmt_rt" uri="http://java.sun.com/jstl/fmt_rt" %>
 <%@ taglib prefix="sql" uri="http://java.sun.com/jstl/sql" %>
 <%@ taglib prefix="sql_rt" uri="http://java.sun.com/jstl/sql_rt" %>
 <%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>
 <%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
 
 
 (I am also using struts, hence the last two page directives)
 
 
 Step 3:
 Finally I tried to build an EAR (which used to build OK before I added JSTL) using a slightly modified version of the build.xml that comes with the Medrec tutorial. wlcompile went OK, but wlappc failed with the following message:
 
 java.lang.NoClassDefFoundError: javax/servlet/jsp/el/VariableResolver
 
 
 What am I doing wrong? I followed the instructions given in the JSTL 1.0.6 package. Is wlappc not the right tool for translating/compiling the JSP?
 
 Please help!
 
 
 Regards,
 Nadeem

I can't be sure about exactly what's happening here, but I can point out several things.
 The class "javax.servlet.jsp.el.VariableResolver" is associated with JSTL 1.1.x, and JSP 2.0. It's not part of JSTL 1.0.x. Make sure you really have version 1.0.6, and don't have 1.1 somewhere.
 If you're just trying to use the JSTL, you shouldn't need several of those jars that you're presently including. You only need jstl.jar and standard.jar.
 Why are you using the "rt" versions of these taglibs? Those don't even use the expression language. I would remove "_rt" from all of those references.
 Note that if you're using Struts and the JSTL, you probably want to use Struts-EL, which is a version of the Struts jar that uses the EL to evaluate attribute values. Check the struts-user archive for some information about this. You'll find the struts-el distribution in the "contrib" directory of the Struts distribution.

Problems with using highlighting feature in iBooks after updating to ios8. Please help.

Similar Messages

Maybe you are looking for