Problems with using the 'Dip to Color' dissolve

On a short project we decided to use the dip to color dissolve. We wanted the scene to desolve to white and selected the color without problems, however, on applying the dissolve it goes to white as intended but then dissoleves to black halfway through the transition. We should like this to stay white and then fade to the the next scene from white.
Any suggestion would be welcome.
Regards,
Tom

Well too me it looked ok, but I have now adopted a work around - by using opoacity over a white background on a lower track which produced the desired result.
Thanks for getting back to me - I shall explore this transition/dissolve further some other time.
Regards,
Tom

Similar Messages

I am having problem with using the Basic brush definition

I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)

for whatever reason, the basic 'brush' you see in the brushes palette effectively means removing any brush from a path. to draw with the brush tool you need a brush defined. in your case the last one selected being the 5 pt oval one.

There is a problem with using the new Hotmail attachment buttons with firefox 3.6.8

I use firefox 3.6.8 browser and was unable to use the new attach file buttons in the newest version of hotmail. .
I sent a help request to microsoft and got back a 'generic' answer that the new hotmail works with all browers; ie, safari, chrome and firefox 3.0+.
Well, that is not exactly true. Because I then troubleshot the problem by opening hotmail in ie vice firefox I was able to attach multiple files (pics/documents) with no problem.
I then went back to firefox and still had the same problem.
The mouse pointer just hovers over each icon where there should be a button and no clicking is there to be clicked....so, there is no way to attach.
hopefully you'll get it worked out soon.
regards, rob N

Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for your problem, hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Websites+look+wrong
In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

Problem with using the import tool under User Admin role

Hello,
I have created a role through the import facility under the User Admin role:
[role]
ridpcd:portal_content/content....
rdesc=my role
Although I have recieved a successful message I couldn't locate this role, not when I was searching it in User Admin or under the pcd location where I asked to create it.
I then imported a transport package from another portal that contains a role in the exact same pcd location, this time an actual role has been created.
The problem is that when I try to use the import facility again to assign a group to this role I get: Error: Role found, but unique name "pcd:portal_content/..." is not unique!
When I search User admin for this role I get only one and when I go to this pcd location I only see one role so I don't understand this message and how can a unique pcd location cannot be not unique.
Any ideas...?

Try performing the import again, but this time do not use the fully qualified pcd path. Just specify the rid without the pcd definition. In otherword if you did a search in the user admin for the role ID you would not use the full pcd:rid just the rid value.
The alternative is to first delete the role and then import again. The reason you are gettign the problem is that the pcd generates a unique sid entry for the role and thus the manner in which you are performing the update using the full pcd path is not allowed. For this reason drop the fully qualified pcd path.

Having a problem with using the brushes

I am going to post my problem in steps so that it is better understood.
1. I go to the brush menu at the top left corner
2. I go to the down arrow to select a brush
3. I see the brush choices
4. I want to scroll up or down to find the brush I want
5. the choices disappear and it will not let me view the brushes, only the one that is already visible is the one I can use.
Help me please! I can not find the answer to this anywhere. I have tried resetting the tools with no success.
Thanks to anyone with an answer~

Which version of photoshop elements and operating system?
If your on windows, try the following:
(this effects other scroll bars besides the text tool)
http://kb2.adobe.com/cps/865/cpsid_86508.html
Your system font size may be set to large:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Setting_the_Windows
MTSTUNER

Problems with using the singlewrite function (in the CWDIO control)

Hi,
I'm using an old nidaq card (PCI 1200) with nidaq 6.9 (the card is not supported after this version).
I'm using a CWDIO control to send regularly orders to an other card (an order every 50 ms for example) using these lines of code :
CWDIO1.Ports.Item(1).SingleWrite (128)
CWDIO1.Ports.Item(1).SingleWrite (0)
The problem is that I have blanks in the orders sent. During 2 or 3 seconds, the orders are sent, no error or warning are made by the code, but the orders don't appear at the output of the card. After this blank period, the orders reappear (as if they were queued somewhere) and during 2-3 seconds the orders are well sent in real-time and a new blank period begins again ...
Where am I wrong in what I made ? I tried using CWDO control but I had some problems too (the Progress event doesn't raise)...
Antoine

Hello Antoine,
Do you see the same behavior when you are testing the device from the test panels of MAX ?
Do you have also try to test the examples for VB without Component Works "C:\Program Files\National Instruments\NI-DAQ\Examples\VBasic\Do" ?
Do you have also the same behavior running the Measurement Studio examples "C:\Program Files\National Instruments\MeasurementStudio\VB\Samples\DAQ\Digital\Digital Output" ?
Regards.
Matthieu Gourssies
National Instruments France

Are there known problems with using the PCI-8430/8 with windows 7?

Hello,
I have several PCI-8430/8 cards (8 serial port cards) that were originally purchased to be used in Windows XP computers for the purpose of calibrating proprietary serial devices (using 9600 baud.). When my company transitioned to Windows 7 PCs (Dell Optiplex), I discovered that the PCI cards now collect data from our devices at a noticeably slower rate than previously experienced, with our calibration process taking nearly twice as long as it used to. It almost seems as if the ports can no longer be accessed asychronously. I have tried using several different versions of the Ni-Serial driver to resolve the problem, all to no avail. Has anyone heard of this problem, or know of a potential solution to speed up the serial communications with this data card?

You are correct that VISA is used in LabVIEW, but it can also be used from other programming environments.
I actually thought about what may be causing the performance difference. The ports on this board have 128 byte receive buffers for each port. By default they will wait until 64 bytes arrives before sending a batch of data to the computer. If you have less than 64 bytes received by the port, it will wait for a period of 4 bytes before deciding to go ahead and send the data to the computer.
The trigger point at which they decide to send data to the host is configurable, either through the advanced properties of the port in Device Manager, or through Measurement & Automation Explorer (NI-MAX). Configuring the receive buffer trigger point to a lower number can help decrease latency from your hardware, at the expense of increasing CPU usage. The best latency (and also the highest CPU usage) will be achieved by setting this value to 1, since it will always send the data back to the computer as soon as it arrives, and never incur the 4-byte-time delay before transmitting data back to your application.
I would suggest you look at the receive buffer settings on your XP machines which run quickly. If they are not set to 64, they have been customized for your application, and you will want to ensure you configure them the same way on your Windows 7 machines.

Problem withe using the russian characters in selection

Hi guys,
I have this code:
select result from ztable into v_result where field1 = c_russia.
where c_russia = Отправитель...
i have this in the ztable but its not showing in my v_result when I debug and sy-subrc NE 0...
y is this so? is there anything wrong with it?
thanks a lot!

Hi Mark,
Check this code I have return a simple code for fetching data from MAKT.. Copy the data for text field directly from ZTABLE and paste it in your program. I feel there is some mismatch in the program it seems.
REPORT ZTEST01.
tables: makt.
Data: c_text(40) type c value '89ABX1:Listauswertung nach Jahren'.
data: begin of i_makt occurs 0.
        include structure makt.
data: end of i_makt.
      select * from makt into corresponding fields of table i_makt
                                          where MAKTX = c_text.
loop at i_makt.
   write:/ i_makt-matnr,
           i_makt-maktx,
           i_makt-maktg.
endloop.

Bug in FCP 5's dip to color dissolve with text?

Dear all, I'd likle to know if this is a genuine bug or some problem with our setting/system that we haven't yet figured out.
The problem appears when a dip to color dissolve is applied a text clip.
The symptom is what looks like compression artifacts appearing around the text as it dissolves. It is noticeable with normal text but looks really bad with drop shadow applied. It renders this transition unusable and it's a problem as it's part of our show's regular style. It can be worked around but this is not good enough for a pro broadcast application...
We are running FCP 5.0.1 on a dual 2.7ghz G5 with OS X 10.3.9 and working in DV PAL.
Any help appreciated

Welcome to the discussions, Robert. Do you have your rendering set to Fast (linear)? There was/is a bug that causes problems if it is set to medium or high.
Patrick

Dip to color dissolve question

Hi,
I am using a dip to color dissolve between clips, dipping to white. My problem is that the pillarbox lines are also dipping. Is there any way to avoid this?
Thanks.

The good thing about nesting though is that you can adjust the clips in the original sequence and then they'll update in the nest.
Else check this out too:
http://web.mac.com/andymees/Freeand_Easy/main/Entries/2008/1/23_Andy’s_Letterbox2.html
CaptM

Dip to Color Dissolve + Widescreen Matte

Forum,
When my Dip to Color Dissolve comes in my black bars (wide screen matte) are trumped by the dissolve.
I'm looking for a way to keep the bars all the way through the end of the Dip to Color Dissolve.
No such luck yet.
Thanks to anyone that can help,
Trey

The good thing about nesting though is that you can adjust the clips in the original sequence and then they'll update in the nest.
Else check this out too:
http://web.mac.com/andymees/Freeand_Easy/main/Entries/2008/1/23_Andy’s_Letterbox2.html
CaptM

I am having problem with using my Basic brush definition

I am having problem with using the Basic brush definition. When I try to click on it will not allow me to use it and will automatically use the 5 pt. oval brush definition. The only way I can use the basic brush is after I have already drawn something and then I have to click on the stroke and then press basic. This is incredibly annoying and if anyone could help I would greatly appreciate it. (I have Adobe CS6)

Basic is not a brush, only a starting point for you to make a brush. Load the real brush you want before beginning to draw.

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer no problem with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software.

I purchased Adobe Creative Suite C2 and have been using it for years on the same computer without any problems with using it. Recently upon opening Photoshop I received a pop up window saying due to Adobe Software security we need you to activate your CS2 software. I tried, phone activation, web activation, nothing is working. I have the serial number and my Adobe account information. Any suggestions?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium

Problems with using the 'Dip to Color' dissolve

Similar Messages

Maybe you are looking for