Problems with viewing contacts after activating the cellular data entry

Hello I have a problem, I activated my iPhone 4S voice data phone to send a mms anddoes not make me see the book as some one can help me? Thanks to all

yes iam experiencing same problem,it is very frustrating,nokia must solve it,anyway i found a way to overcome it that is we normally type sms first then select contacts whom to send,do it in reverse manner first select contacts from contact list mark them and from options menu select create message to send sms to all marked contacts,problem of dissappearing some contacts will be overcome

Similar Messages

Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

I tried calling support and they want to sell me $79 worth of support in order to get it straightened out!

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

Strange noise problem with music layer after replacing the music file using script in CS6

Hey guys,
I got a strange problem. Sometime when I import a music file, or replace a music footage with another music file using the "replace()" or "importFile()" method, the music layer added one second noise at the beginning. like this,
Does anyone know what's going on here?
I'm using After Effects CS6 windows Server 2008 64bit.
Thanks in advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi Myleniu,
Thanks for your replay. Actually, it doesn't matter what makes up my comp, this problem just randomly happen when I render any comp. For example, I have a comp named "noise", I run a script to replace the music then render it, I use a "for" loop to do this 5 times and the music noise problem just happen one time.
I'm starting to think that win server might be the problem.

Problem with viewing Artwork after iTunes 10.5.1.42 update

Anyone able to help with question below?
I now cannot view my Artwork for my album unless i am actually playing the song. The Artwork box in the bottom left corner reads "Selected Item", as it should, however now I cannot view the artwork for the selected item, I actually have to play the song to view the art work and its driving me nuts.
Anybody able to help or have the same issue?
Thanks!

i'm having the exact same thing, and is driving me crazy also. at first I thought the switch to newest version deleted all my album arts but then i looked in file info and they still seem to be there. hopefully someone has already told apple about this. must be a bug in the latest update, a case of if it wasn't broken shouldn't try to fix it.
sorry i can't helpmore, suppose only thing we can do is just wait it out until next update and hope it gets fixed but don't worry, your not alone. my guess is everybody having this same problem with the newest version. my bad for using automatic update i guess..

Problem with BPS Reports after upgarding the system to BI.7

Dear Experts,
We are facing problem with the BPS Reports after upgarding the system to BI.7
In 3.5system the reports are dispalyingthe data.
we have copied the production system to X system and has migrated the same to BI.7.
in the X system the reports are not showing the data and even we generated the web interfaces in X system.
After giving the input to BPS Layout and when we go for output ,we are getting the message No Data has been found.
when we chekced the corresponding cube data was existing.
It would be a great help if any valuable suggestions to over come the problem.
Regards,
Sunil...

Dear Andrey,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code has not been maintained for the sales documnet 1296".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

Problems with iTunes Airplay after pausing the playback

I have a problem with itunes airplay since I've updated my system to Windows 8.
I'm able to stream music to my Yamaha receiver once, but when I pause the playback and resume to it after a short while, iTunes always freezes and it is shown as inactive in the Task Manager...
I hadn't any problems with it on Windows 7.
Any Solutions?
btw: I tried installing iTunes 11.0.4 and iTunes 10.7..same issue on both versions.
And I'm sorry for my bad english ;-)

The following article(s) may help you.
Credit card security code or postcode issues.

Problem with my Inbox after restoring the backup

Hi,
I've bought N73 a few days ago and tried to restore my backup from the old 7610 (Messages and Contacts) with PCSuite 6.84....
Everything was all right except the Inbox...
All of the messages have the sender's number instead of their name!!
This problem is only in my inbox, in the sent section i have the messages with contacts name.
I tried to sync my phone with PCSuite, wondering, there was the sender's name..!!
Still in my inbox there is no sender's name for the old messages, but new ones come with their name.
What can i do to adjust it, having the names instead of the numbers, for my restored messages?
Thanks a lot!

Any idea!?

Problem with dragged component after resizing the frame

My application is simple: I am displaying an image on a panel inside a frame (JFrame). I am able to drag the image inside the panel. My problem is that, after dragging the image around, if I am resizing the frame, the image goes back to its original position.
Does anyone know a workaround?
I have been using the sample provided by noah in his answer (reply no. 3) to a previous question on this forum: http://forum.java.sun.com/thread.jsp?forum=57&thread=126148
Thank you!

Chek out the visibility of your components. Some operations may render them invisible. Use the setVisible( boolean ) to make them visible.

Having problem with iPad mini retina connecting to cellular data. Any body else.

Having a problem with iPad mini connecting to cellular service. Anybody else?

Hey there nemesyssoft!
Congrats on the new iPad! It's a great device! We certainly want you to be able to use the device as soon as possible. If I may ask, were you still having issues connecting to the data network at all? Activation can take be a bit longer the initial time. Please let us know if you still need assistance.
Thanks!
MichelleG_VZW
Please follow us on Twitter @vzwsupport

Problem with fish eye after applyng the video is jumping

I have hero 4 silver and after applying fish eye settings on goPro 3 black + 2.7K wide my video is jumping, Can you help?
My video was recorded on 2.7K/24/ wide

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

Problems with video out after closing the lid.

I bought a Mini-Display Port to HDMI and connected it to my macbook pro and to my tv....Everything is perfect i close the lid....Now i am pretty sure i read somewhere that you can still use your macbook if you have it connected to an external screen and even if the lid is closed...can anyone tell me if i have to do something in the preferences?or is it just normal...I am new with macs,just bought mine 1 1/2 months ago so please take it easy on me... :P Thanks

You can use the MacBook Pro after you close the lid it's called 'Clamshell Mode' but for it to work correctly you have to attached a keyboard and mouse as well as the TV, then you can close the lid to put it to sleep then touch a key on the keyboard or move the mouse and it will wake up again and display on the screen.

HT1766 Has anyone else had a problem with their phone after using the cable to upload photos from Camera stream to computer photo program? My phone is frozen, cannot get into use phone, cannot connect to the Internet, and even APPLE is stumped.

I only have my IPhone5 for two months and am very upset that now they may need to give me a new phone and lose anything that may not have been recently backed up by the phone. Has anyone else had this problem? How did you reseolve it? Hard reboots did not help.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Is there a problem in turning the cellular data on and off to save battery?

is there any problem in turning on and off the cellular data frequently to save battery???

Hi Friend,
There is no problem. Even you turn data cellular off, you can keep turn on Wireless, so you can access internet, send/receive iMessages or anything else.
But, I have present my battery during 34 hours (charged until 83% on Saturday 22:30 and drained till 3% on Monday 08:00) ! Amazing ! And, I already posted this solution before: recharge the battery until reach 80 to 90%. IOS 6 User's Guide says make a full recharge just once a month. It takes few days to see the improvements. Restore your device will improve the results as well. All of this improves my battery fife over 15 hours, but my last battery life tes was 34 hous!
Hope it will be helpful

Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load wit

Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load with the USB but do not load the battery me the icon of the battery appear and below of her the beam that indicates that this being loaded but this way I have left it the whole yesterday and what goes of today and continues without loading anything! They can help me porfavor I am grateful for them to him very much! And my PC does not detect it not itunes

Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead.

Problems with viewing contacts after activating the cellular data entry

Similar Messages

Maybe you are looking for