Problems with viewing RAW files and cannot update to ACR 5.7
Hi
I purchased a canon 7D today, then went to take some pictures and came home to find my RAW files are not readable by Bridge or Photoshop. I have done some research and it seems that the solution would be to update. I did this. However, two of my five updates failed to install, one of which is ACR 5.7. I then looked into this and have found the best option is to manual install, but this is confusing me as the directories is says to use do not exist on my mac. I don't know what to do, can anyone help? I just want to be able to view my files in Bridge and edit in ACR and photoshop!!!!!
Thanks.
If you download the 5.7 camera raw update from the following link,
the installation should be automated:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4682
MTSTUNER
Similar Messages
-
Problem with recognition raw files from nikon d600
hello everyone, i hope someone can answer my question.
using cs5 with camera raw . camera raw is not able to open my nef files from my new nikon d600 . what can i do to update the plugin??
from the menu help updates in cs5 it tells me that all soft. is updated but it is still not workingYou need to upgrade to PS CS6 in order to work with D600 raw files. Else, you can convert your raw files to DNG using DNG Converter.
For more details, check
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
DNG Converter: http://www.adobe.com/products/photoshop/extend.displayTab2.html
[Moved the discussion to Photoshop Forum] -
Got problems with creating RTF-files after OSX update
Hi
I don't know if this is really a MAC OS problem, but it occurred after I updated to 10.5.2 - so it's a likely suspect.
Since the update I can't create RTF-files any more with Final Draft, my script writing program. A file is created, but when I try to open it I get an error message that it cannot be found. But the file is there: I can see it and click on it. It just won't open.
Only today now I got the same error message with a doc-file I downloaded some months ago.
The only big change I lately made to my Mac was the update to 10.5.2 and I got the new Office 2008 (both are the German versions). Could the problem come from either of them? I contacted Final Draft's support - they didn't know of the problem.
Maybe someone else in this forum has encountered similar problems?Have you tried to Repair Permissions using Disk Utility?
1. Open Disk Utility in your Applications/Utility folder.
2. Click on the icon for your boot volume.
3. Click on the First Aid tab and select Repair Permissions
4. Click the repair permissions button.
This is the first thing to try whenever any program goes wonky. It's free, but takes awhile for all the files that have to be checked and changed. -
Problem with Date of files and email
Hi,
I have a MacBook with MacOSx snow Leopard 10.6.3.
I have a problem with the date showed for the files inside Finder and for my emails on Apple Mail. All files show a date with correct day and correct hour but with wrong month; all files have as month January. Except for files modified or email received in the last two days all the other files displayed by Finder (and also for email) have this wrong date. But when I want to attach a file to an email or insert a file (for example word) inside another file word the system displays correct date.
Someone had the same problem?
The version of Apple Email is 4.2 and the Finder is 10.6.4.You make no mention that you have checked your calendar settings.
System Preferences>Time & Date>Date & Time
Was this done?
I am not at my SL MBP at the moment but, the above should be the same and/or similar as the Tiger OS.
"MacOSx snow Leopard 10.6.3."
Update to OS 10.6.4, repair permissions and restart your computer.
!http://i50.tinypic.com/izvwo1.gif! -
Problems with opening RAW files in PSE7
Hello all
I have just upgraded my DSLR from a Sony Alpha 200 to a Sony Alpha 450
While using the Alpha 200 I had no problems opening RAW files in Elements 7 (Sonts RAW file format = .ARW)
But now im using the Alpha 450 Elements says it doesnt reconginse (wrong file type) the .ARW files
Does anyone know the reason for this or a way to correct it?
Cheers
J. BlackHere is the compatibility for ACR versions with Photoshop and Photoshop Elements. I read it in read me file :
The Camera Raw 6.1 plug-in is not compatible with versions of Photoshop earlier than Photoshop CS5 or versions of Photoshop Elements earlier than Photoshop Elements 8.0 for Windows and Photoshop Elements 8 for Mac.
• The latest version of the Camera Raw plug-in available for Photoshop Elements 3.0 customers is Camera Raw 3.6.
• The latest version of the Camera Raw plug-in available for Photoshop Elements 4.0 (Windows) is Camera Raw 3.7.
• The latest version of the Camera Raw plug-in available for Photoshop Elements 5.0 (Windows) is Camera Raw 4.5.
• The latest version of the Camera Raw plug-in available for Photoshop Elements 6.0 (Windows, Mac) and Photoshop Elements 7.0 (Windows) is Camera Raw 5.6.
Hope that helps!
~V -
Problem with importing RAW files from camera
LR 1.3 refuses to import raw files from my camera. Only JPEG's are imported. Got a Canon 350D/Rebel XT. Once I copied the raw files to disk (using Camera Window) Import from disk works fine and converts the CR2 to DNG without a problem. The preference "Treat JPEG files next to..." makes no difference. Anybody a clue what's wrong?
Thanks, EdwinYeah this is a known bug with Canon cameras in general (not just using Lightroom!). If you use the camera to download your images anyway, I believe the trick is to set the camera to mass storage mode and you'll also get the RAWs. Lightroom's import from camera is very buggy though, hence it is a better idea to use a reader, or to manually copy the files to your harddisk first and import from there.
-
Problem with MS Access Files and executable files migrateds
Hi all.
We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES 2 SP2a. I already migrated one volume and in this weekend well migrate the last, and most important, volume to new OES 2 server.
The problem is about some MS Access databases that are very very used for all users and some executable applications that was writed using fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to libraries, databases, images, etc.
The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and in this time the two servers will co-exists. I want to know if it is possible redirect NCP requests to OLDSERVER to NEWSERVER without users rewrite all of MS Access and executable applications. Is it possible?
Tks
Alan Cota.AlanCota wrote:
>
> Hi all.
>
> We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES
> 2 SP2a. I already migrated one volume and in this weekend we´ll migrate
> the last, and most important, volume to new OES 2 server.
>
> The problem is about some MS Access databases that are very very used
> for all users and some executable applications that was writed using
> fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to
> libraries, databases, images, etc.
>
> The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and
> in this time the two servers will co-exists. I want to know if it is
> possible redirect NCP requests to OLDSERVER to NEWSERVER without users
> rewrite all of MS Access and executable applications. Is it possible?
>
> Tks
>
> Alan Cota.
>
>
Have you considered trying to use a dns alias to it. I have not tested with
MS access specifically but many other apps it works perfectly for. This is
how I get around those issues. Of course your issue is that you still
havethe existing server in the tree. How much will there still be on the
old server. You could rename the old nw server and than update its info in
dns to resolve this. -
Problems with importing .MP4 file and the audio in FCP 6
Hi all,
I am pretty new to Final Cut Pro and have just approached my first project.
I have a Samsung VP-MX20
http://www.samsung.com/uk/consumer/detail/spec.do?group=cameracamcorder&type=cam corder&subtype=flashcamcorder&model_cd=VP-MX20/XEU&fullspec=F
*Codecs H.264, AAC.*
I needed some space on the camera so halfway through a holiday i transfered all the video files from the camera to my Laptop.
I have imported these files from the hardrive
Vid rate - 25 fps
compressor - H.264
Pixel Aspect - PAL - CCIR 601
What seems to be the problem is ok when i drag the clip from the viewer to the canvas and apply insert, i get the box that says 'Change Sequence settings to match the clip settings?
i click yes and when the clip is layed out on the timeline there is a red line above the timeline, when i play the clip i only get bleeps as audio and not the original sound.
If i drag the playhead i can hear the audio but if i try to play all i hear us bleeps plus if i import an mp3 the red line appears above the timeline and the same applies
can anyone help me here.
Thanks
EllesHi Zak,
many thanks for your reply, i have contacted Apple and taking your advice and using compressor i have converted the codec H.264 to Apple Pro Res 422 for interlaced material.
I have imported this file and when i drag once again from the viewer to canvas i get the standard box asking to change the sequence to match the clip.
I am still getting the red line above the timeline and bleeping as audio.
any idea? -
Adobe Camera Raw in CS3 is having problems with the RAW files from my Canon 5D Mark II
Adobe Bridge will import the CS2 raw files from the camera card in m Canon 5D Mark II but it will not create thumbnails nor will it convert them to DNG. I want to update the raw reading software but the update page indicates that it only updates into CS4. Will I have to upgrade to CS4 before I can import from my new camera?
MLThe dng converter does indeed work but it adds an extra step to the workflow. Raw files from my Canon 40D are exported and converted to dng in Bridge in one step. Now I must add the extra step of using dng converter. Can I upgrade Adobe Bridge's raw capacity so that I can import from my new camera in the same efficient way? I would prefer to do this without buying CS4.
thank you -- ML -
RoboHelp for HTML 9 - Problem with viewing .chm file on 64bit machine
I am working with RoboHelp for HTML 9 on a 32 bit machine. Recently, we encountered problems when viewing a .chm file on a 64 bit machine. The TOC was fine, but the topics did not appear, only error message "Navigation of this web page cancelled". My compilation settings did not change since the last compilation some months ago. What happens?
Generally, I've only ever seen the need to ensure the CHM is unblocked if it has been downloaded from the web. I could see where it could possibly occur if one moved the CHM from a network drive to a local drive, but I'm skeptical that would be required in that case.
Cheers... Rick -
Problem with Clean Access Agent and Windows Updater
I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
Any help is appreciated!!Verify the allowed hosts in CCA agent.
Try these link:
http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml -
I have all my previous music files in wma formats from my previous PC Windows xp computer. And only two weeks ago I decided to purchase an iMac computer OS X Maverick, and there are a lot of files and information I would like to bring to the Mac, but I'm having problems playing my music file, suited to the PC but not with iMac as yet. So, I hope you can help on this...
Kind Regards
Robert KlaassenWMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them. -
Problems with Excel xlsx files and Presentation Design 2011
Hello,
I just began using Presentation Design 2011 and have run into an issue and would really appreciate your help.
I have very large files in Excel 2007 format (.xlsx) that I need to import into Presentation Design. When I try to do so, it automatically opens the .xlsx file as a 97-2003 Excel file, and in hte process, I then lose a large portion of the data (the file is very large, and the space limitations in 97-2003 are not sufficient for all the data I have, so I receive a message about compatability indicating that the data goes beyond the space limit).
I have tried looking online for a fix to this issue, and I cannot find it. I just installed the service pack 2 patch 8 file, and this still does not work.
Will someone please let me know what I need to download or do to be able to import the xlsx files and maintain them in that format?
Thank you!
CurtisHi Curtis,
In the older version of dashboard design 2011, xcelsius 2008, .xlsx(excel 2007) files are imported and converted automatically to excel 2003 format. So there are some compatiability issues with both versions and also size limitations. excel 2003 cannot have more than 256 columns. I doubt same is the case with new version.
Inside the designer data is in excel 2003 format. So you cannot have data more than the limit and some formats. You should only be pulling in enough data to fill your components in dashboard and remove any unnessary information from the spreadsheet . Since dashboards are meant for summary data, importing very large excels files are not recommended.
Hope it helps you.
Regards,
Nikhil Joy -
Problems with writing to file, and with ActionListener.
I have been trying to write a Payroll Division type program as my school Computer Science Project. However, I have a few problems with it...
import java.io.IOException;
import java.io.FileOutputStream;
import java.io.FileInputStream;
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.util.StringTokenizer;
import javax.swing.*;
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.GridLayout;
import java.awt.event.*;
public class Personnel implements ActionListener {
JFrame GUIFrame;
JLabel ID, Line, OKText,AnswerField;
JTextField IDField, LineField;
JButton OK;
JPanel GUIPanel;
int trialCounter=0;
final static int employeeNumber = 7;
final static int maxValue = ((employeeNumber*4)-1);
//Number of employees, which would be in real life passed by the Payroll division.
public static String [][] sortHelp = new String [employeeNumber+1][3]; /** Creates a new instance of Personnel */
public Personnel() {
GUIFrame = new JFrame("PersonnelSoft"); //create title header.
GUIFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
GUIFrame.setSize(new Dimension(100, 140));
GUIPanel= new JPanel(new GridLayout(2, 2));
addWidgets();
GUIFrame.getRootPane().setDefaultButton(OK);
GUIFrame.getContentPane().add(GUIPanel, BorderLayout.CENTER);
GUIFrame.pack();
GUIFrame.getContentPane().setVisible(true);
GUIFrame.setVisible(true);
private void addWidgets() {
ID = new JLabel ("Please enter your employee Identification Number:", SwingConstants.LEFT);
IDField = new JTextField ("ID", 5);
Line = new JLabel ("Please enter the line of your payroll with which you have concerns:", SwingConstants.LEFT);
LineField = new JTextField ("###", 2);
OKText = new JLabel ("Click OK when you have verified the validity of your request", SwingConstants.LEFT);
OK = new JButton ("OK");
OK.setVerticalTextPosition(AbstractButton.CENTER);
OK.setMnemonic(KeyEvent.VK_I);
AnswerField = new JLabel("The Result of your Querie will go here", SwingConstants.LEFT);
GUIPanel.add(ID);
GUIPanel.add(IDField);
GUIPanel.add(Line);
GUIPanel.add(LineField);
GUIPanel.add(OKText);
GUIPanel.add(OK);
GUIPanel.add(AnswerField);
OK.addActionListener(this);
ID.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
OKText.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
Line.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
public static void ArrayCreate() throws IOException {
//creates a employeeNumber x 3 array, which will hold all data neccessary for future sorting by employee ID number.
int counter = 2;
int empCounter = 1;
String save;
//avoid having to waste memory calculating this value every time the for loop begins
FileInputStream inFile = new FileInputStream("C:\\Documents and Settings\\Abraham\\humanresource4\\src\\humanresource4\\HR.txt");
BufferedReader in = new BufferedReader(new InputStreamReader(inFile));
String line;
line = in.readLine();
StringTokenizer st = new StringTokenizer(line);
save = st.nextToken();
sortHelp[0][0] = save;
sortHelp[0][2] = save;
while (st.hasMoreTokens()) {
save = st.nextToken();
sortHelp[0][1] = save;
while (counter <= maxValue) {
line = in.readLine();
if (((counter - 1) % 4) == 0) {
st = new StringTokenizer(line);
sortHelp[empCounter][0] = st.nextToken();
sortHelp[empCounter][2] = sortHelp[empCounter][0];
while (st.hasMoreTokens()) {
save = st.nextToken();
sortHelp[empCounter][1] = save;
empCounter++;
counter++;
public static String[] joinString() {
String[] tempStorage = new String[employeeNumber+1];
int counter;
for (counter = 0; counter <= employeeNumber; counter++) {
tempStorage[counter] = (sortHelp[counter][1] + sortHelp[counter][0]);
return (tempStorage);
public static String[] sortEm(String[] array, int len)
java.util.Arrays.sort(array);
return array;
public static void splitString(String[] splitString){
int counter;
for (counter = 0; counter <= employeeNumber; counter++){
sortHelp[counter][0]=splitString[counter].substring( 5 );
sortHelp[counter][1]=splitString[counter].substring(0,5);
void setLabel(String newText) {
AnswerField.setText(newText);
void writetoHR(String local) throws IOException {
FileOutputStream outFile = new FileOutputStream ("C:\\Documents and Settings\\Abraham\\humanresource4\\src\\humanresource4\\HR2.txt");
BufferedWriter out = new BufferedWriter(new OutputStreamWriter(outFile));
out.write(local+"the preceding employee number is not in our database, but has submitted a request. Please sort out the issue");
System.exit(0);
public void actionPerformed(ActionEvent e){
boolean flag=false;
String local=IDField.getText();
int i=0;
while((i<=employeeNumber)&&(flag==false)){
if (sortHelp[1]==local) {
flag=true;
i++;
trialCounter++;
if (trialCounter>=3)
writetoHR(local);
if (flag==false)
setLabel("Your ID number does not exist in our records. Verify your ID and try again.");
else {
switch (LineField.getText())
case 04:
setLabel("Your pay is calculated by multiplying your working hours by the amount per hour. If both of these fields are satisfactory to you, please contact humanresource");
break;
case 03:
setLabel("Hourly amount was calculated by the system, by dividing your yearly pay 26 and then 80.");
break;
case 07:
setLabel("Overtime pay was calculated by multiplying regular hourly pay by 1.1");
break;
case 06:
setLabel("The overtime hourly pay was multiplied by the amount of overtime hours.");
break;
case 10:
setLabel("For holiday hours, your pay is increased by 25%.");
break;
case 09:
setLabel("The holiday hourly pay was multiplied by your amount of holiday hours.");
break;
case 11:
setLabel("Your total pay was calculated by adding all the separate types of payment to your name.");
break;
case 17:
setLabel("Your net pay was found by subtracting the amount withheld from your account");
break;
case 19:
setLabel("Your sick hours remaining were taken from a pool of 96 hours.");
break;
default:
setLabel("Please contact humanresource.");
break;
private static void CreateAndShowGUI() {
JFrame.setDefaultLookAndFeelDecorated(true);
Personnel GUI = new Personnel();
public static void main(String[] args) throws IOException {
String[] temporary = new String[employeeNumber];
ArrayCreate();
temporary = joinString();
temporary = sortEm(temporary, employeeNumber);
splitString(temporary);
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
CreateAndShowGUI();
int row;
int column;
for (row = 0; row < (employeeNumber); row++) { // verify proper output by ArrayCreate splitString
for (column = 0; column <= 2; column++) {
System.out.print(sortHelp[row][column]);
System.out.print(' ');
System.out.print(' ');
System.out.println();
1) It does not permit me to switch on a String. How do I solve that?
2)How would I throw an exception (IO) within actionperformed?
3)Generally, if cut it down to everything except the writing to a file part, the actionperformed script causes an error... why?
Thanks in advance.
And sorry for the relative lameness of my question...
---abe---Thank you very much. That did solve almost all the problems that I had...
I just have one more problem.
First (here's the new code):
import java.io.IOException;
import java.io.FileOutputStream;
import java.io.FileInputStream;
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.util.StringTokenizer;
import javax.swing.*;
import java.util.*;
import java.awt.BorderLayout;
import java.awt.Dimension;
import java.awt.GridLayout;
import java.awt.event.*;
public class Personnel implements ActionListener {
JFrame GUIFrame;
JLabel ID, Line, OKText,AnswerField;
JTextField IDField, LineField;
JButton OK;
JPanel GUIPanel;
int trialCounter=0;
final static int employeeNumber = 7;
final static int maxValue = ((employeeNumber*4)-1);
public static String [][] sortHelp = new String [employeeNumber+1][3];
public Personnel() {
GUIFrame = new JFrame("PersonnelSoft"); //create title header.
GUIFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
GUIFrame.setSize(new Dimension(100, 140));
GUIPanel= new JPanel(new GridLayout(2, 2));
addWidgets();
GUIFrame.getRootPane().setDefaultButton(OK);
GUIFrame.getContentPane().add(GUIPanel, BorderLayout.CENTER);
GUIFrame.pack();
GUIFrame.getContentPane().setVisible(true);
GUIFrame.setVisible(true);
private void addWidgets() {
ID = new JLabel ("Please enter your employee Identification Number:", SwingConstants.LEFT);
IDField = new JTextField ("ID", 5);
Line = new JLabel ("Please enter the line of your payroll with which you have concerns:", SwingConstants.LEFT);
LineField = new JTextField ("###", 2);
OKText = new JLabel ("Click OK when you have verified the validity of your request", SwingConstants.LEFT);
OK = new JButton ("OK");
OK.setVerticalTextPosition(AbstractButton.CENTER);
OK.setMnemonic(KeyEvent.VK_I);
AnswerField = new JLabel("The Result of your Querie will go here", SwingConstants.LEFT);
GUIPanel.add(ID);
GUIPanel.add(IDField);
GUIPanel.add(Line);
GUIPanel.add(LineField);
GUIPanel.add(OKText);
GUIPanel.add(OK);
GUIPanel.add(AnswerField);
OK.addActionListener(this);
ID.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
OKText.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
Line.setBorder(BorderFactory.createEmptyBorder(5,5,5,5));
public static void ArrayCreate() throws IOException {
int counter = 2;
int empCounter = 1;
String save;
FileInputStream inFile = new FileInputStream("C:\\Documents and Settings\\Abraham\\humanresource4\\src\\humanresource4\\HR.txt");
BufferedReader in = new BufferedReader(new InputStreamReader(inFile));
String line;
line = in.readLine();
StringTokenizer st = new StringTokenizer(line);
save = st.nextToken();
sortHelp[0][0] = save;
sortHelp[0][2] = save;
while (st.hasMoreTokens()) {
save = st.nextToken();
sortHelp[0][1] = save;
while (counter <= maxValue) {
line = in.readLine();
if (((counter - 1) % 4) == 0) {
st = new StringTokenizer(line);
sortHelp[empCounter][0] = st.nextToken();
sortHelp[empCounter][2] = sortHelp[empCounter][0];
while (st.hasMoreTokens()) {
save = st.nextToken();
sortHelp[empCounter][1] = save;
empCounter++;
counter++;
public static String[] joinString() {
String[] tempStorage = new String[employeeNumber+1];
int counter;
for (counter = 0; counter <= employeeNumber; counter++) {
tempStorage[counter] = (sortHelp[counter][1] + sortHelp[counter][0]);
return (tempStorage);
public static String[] sortEm(String[] array, int len)
java.util.Arrays.sort(array);
return array;
public static void splitString(String[] splitString){
int counter;
for (counter = 0; counter <= employeeNumber; counter++){
sortHelp[counter][0]=splitString[counter].substring( 5 );
sortHelp[counter][1]=splitString[counter].substring(0,5);
void setLabel(String newText) {
AnswerField.setText(newText);
void writetoHR(String local) throws IOException {
FileOutputStream outFile = new FileOutputStream ("C:\\Documents and Settings\\Abraham\\humanresource4\\src\\humanresource4\\HR2.txt");
BufferedWriter out = new BufferedWriter(new OutputStreamWriter(outFile));
out.write(local+"the preceding employee number is not in our database, but has submitted a request. Please sort out the issue");
System.exit(0);
public void actionPerformed(ActionEvent e){
boolean flag=false;
String local=IDField.getText();
local trim();
int i=0;
while((i<employeeNumber)&&(flag==false)){
if (sortHelp[1]==local) {
flag=true;
else {
i++;
trialCounter++;
if (trialCounter>=3)
try {
writetoHR(local);
} catch (IOException exception) {
setLabel("We are sorry. The program has encountered an unexpected error and must now close");
} finally {
if (flag==false)
setLabel("Your ID number does not exist in our records. Verify your ID and try again.");
else {
final Map m = new HashMap();
m.put("04","Your pay is calculated by multiplying your working hours by the amount per hour. If both of these fields are satisfactory to you, please contact humanresource.");
m.put("03", "Hourly amount was calculated by the system, by dividing your yearly pay 26 and then 80.");
m.put("07", "Overtime pay was calculated by multiplying regular hourly pay by 1.1");
m.put("06", "The overtime hourly pay was multiplied by the amount of overtime hours.");
m.put("10", "For holiday hours, your pay is increased by 25%.");
m.put("09", "The holiday hourly pay was multiplied by your amount of holiday hours.");
m.put("11", "Your total pay was calculated by adding all the separate types of payment to your name.");
m.put("17", "Your net pay was found by subtracting the amount withheld from your account.");
m.put("19", "Your sick hours remaining were taken from a pool of 96 hours.");
setLabel(m.get(LineField.getText()));
private static void CreateAndShowGUI() {
JFrame.setDefaultLookAndFeelDecorated(true);
Personnel GUI = new Personnel();
public static void main(String[] args) throws IOException {
String[] temporary = new String[employeeNumber];
ArrayCreate();
temporary = joinString();
temporary = sortEm(temporary, employeeNumber);
splitString(temporary);
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
CreateAndShowGUI();
int row;
int column;
for (row = 0; row < (employeeNumber); row++) { // verify proper output by ArrayCreate splitString
for (column = 0; column <= 2; column++) {
System.out.print(sortHelp[row][column]);
System.out.print(' ');
System.out.print(' ');
System.out.println();
Now that code above produces two errors. First of all.
local trim();produces the error:
Syntax error, insert "AssignmentOperator ArrayInitializer" to complete ArrayInitializerAssignementSecondly, if I take that into comments, the line
setLabel(m.get(LineField.getText()));Produces the error:
The method setLabel(String) in the type Personnel is not applicable for the arguments (Object)If anybody could help me solve these, I would be sincerely thankfull.
Now, before anybody asks as to why I want to trim the String in the first place, it is due to the fact that I compare it to another String that is without whitespaces. Thus the field that DOES have whitespaces was preventing me from launching into the if loop:
if (sortHelp[1]==local) {
flag=true;
(within actionperformed) Or at least that's my explanation as to why the loop never launched. If it is wrong, can somebody please explain?)
I apologize for the horrible indentation and lack of comments. This is an unfinished version.. I'll be adding the comments last (won't that be a joy), as well as looking for things to cut down on and make the program more efficient.
Anyways,
Thanks in Advance,
---abe--- -
Problems with reading raw files in lightroom 5
Ich kann weder dng Dateien von Leica x1 noch von fuji xt1 importieren! Was könnte der Grund sein, im Handbuch gibt es keine Hinweise auf Probleme?@ Kurze Antwort erwünscht
Check the destination you have specified in the Import panel. It needs to point to a location that Lightroom can read and more important write files to. Usually the error message (in English) says “files cannot be read” and this really means that LR was unable to copy the files to the destination so then when it tried to import from that destination not file were found to read.
Maybe you are looking for
-
How to pass the out put of ListFiles as input to SynchronousRead FileAdaptor in Oracle SOA
Hi All, I have list of XML Files in one folder, i want to read all the files one by one , i can use the ListFiles to get all the files, i want pass each files at a time as input to SynchronousRead. i know how to pass the file names dynamically to Sy
-
ITunes Video Compared to DVD on MBP?
I want Scrubs season 5 on DVD. But season 4 comes out in October so who knows when season 5 will be out. It's available on iTunes but I am concerned about the quality. If I download the season, will it compare to DVD quality on my MBP? I found this w
-
IDT drivers not updated when 8.1 was installed, IDET website says they no longer support?!
Does anymore have this problem with a fix?
-
QoS and WMM settings slow internet down when enabled
Ok, so I recently upgraded to a Linksys E3200. I am trying to get the QoS to work properly. I know that it is supposed to prioritize network traffic, so that if I have busy traffic but I am playing an online game, it should keep my gaming from stutte
-
Query Regarding Integration Event
I have a scenario where i have to create an opportunity team based on the data that user enters in oppportunity and it has to be done when new record is saved in opportunity object. We cannot use out of box workflow functionality in this scenario so