Problems with Vista installing driver for
Just bought the 6 G ZEN and have installed the supplied software for the device and when I connect the device to the PC Vista starts to Install Driver Software. I then get an error message 'Device driver was not installed successfully, please consult manufacturer for assistance getting this device installed.'
I also tried downloading the updated software from?the Creative website?and installing this on my PC, however I get the same error message.
When I go in to the control panel and to the device manager, there are two new portable devices with errors:
. Creative ZEN, with error message: 'Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 9)'
2. Unknown device, with error message: 'This device is not configured correctly. (Code )'
Hope somebody can help me out with this. (I tried to send this message to support by completing the online email form, however upon submitting the form (URL: http://dmzrespapp.europe.creative.com/kana/FRH) I get a screen saying Internet Explorer cannot display the webpage)
i'm afraid the issue could be due to the pc as the nati've driver on the vista computer might be corrupted.
but to confirm that, you can access to recovery mode to do clean up to have a try.
also you can still upgrade the latest firmware on the xp computer to see the results.
i hope the above can help you.
Similar Messages
-
I am getting an error encountered problem with the display driver for my Photoshop CS5 extended
I have Windows 7 and have used CS5 extended with no problems for quite a while now.
Last week I started up CS5 and received the error:
"Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturers website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
"Please close program and uninstall and re-install if problem persists"
I was able to edit, however when I went to save my work it would not do so. The following error came up.
"Could not complete the command because the extension could not be loaded"
"Could not save a copy as .....because of a program error"
I checked to make sure I have the latest driver, I also uninstalled and re-installed the program and I am still getting the errors.
Can anyone help with this?Error 1402 | Error 1406 | Acrobat, Reader
-
Problem when install driver for DKU-5 cable
After installing driver for DKU-5 cable follow guide line, i conected DKU-5 cable with my computer but there is error appear that is 'can not pass winxp logo testing'.So i can not complete install driver for DKU-5 cable.Please help me.Thanks.
When you get that message, just select "yes" or "continue anyway" and you should be fine.
-
Performance problems using WLS6.1 with the thin driver for Ora9i from OTN
Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses. It works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, GermanyI had done this from the very beginning, but I was still getting very bad performance under
concurrent accesses. I even followed Sree's instructions and removed the old thin driver from
weblogic.jar, but this didn't help. I am now trying to get the OCI driver for 9i running and hope
this will solve the problem.
Samuel
Tamilselvan Ramasamy wrote:
You have to use Oracle's Oracle 9i thin driver .
put this driver infront of the classpath i.e before weblogic_sp.jar and
weblogic.jar
/selvan
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]..
The BEA driver is available in WLS6.1SP2 which is GA.
hth
sree
"Samuel Kounev" <[email protected]> wrote in message
news:[email protected]..
Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under
WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses.
It
works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany -
Install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite
install driver for HP Laserjet PRO CP1525nw in my MacBook with OS X Yosemite V 10.10.1 (I have the disk but it doesn't load the driver)
Hi @Peggysguy ,
I see that you are having issues installing the printer on Yosemite. I will certainly do my best to help you.
The CD won't support Yosemite. You just need the newest drivers to install.
I have provided you with the downloaded Full Software drivers for the Laserjet Pro CP1525nw.
HP LaserJet Professional CP1525 Color Printer Series Full Software Solution.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Satellite Pro A120: I have problems with the graphics driver installation for W2k
I have installed windows 2000 on an A120 the system is fully service packed and up to date before I even begin installing the required drivers I am unable to restart the system. Once I install the drivers as recommended I have problems with the graphics driver as it will not install because it requires a restart and then I am unable to install any new programs that require a restart as the driver has not installed correctly.
The laptop is a A120 Pro, 1 week old and came with XP home, because of this toshiba will not offer me support as I have changed the O/S even though they obviously support 2000 on this laptop as they supply the drivers.
Any ideas would be greatly appreciated.the reason the driver is not working is down to a problem with the windows 2000 not having the ability to reboot.
When you select restart the system appears to power down then stays switched on. Now if I try to install software I get an error saying that the system needs to complete a restart to finish the install of the driver.
The restart problem happens as soon as win2k is installed as although I have now shipped the laptop to the sales team I have another one which has just had a clean install of win2k without any drivers and the fault is present on this one.
I am thinking it could be to do with power management but I'm not to sure as I have never come across this as I normally purchase machines which accept just about any O/S. -
problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions. -
Problem with GX630 optical drive
Note: I have owned the GX630 for about 4-5 weeks give or take
Overall I really like the GX630 I purchased. It has ran and performed exceptionally well. With that said, I have a slight problem with the optical drive of my 630. I have noticed this problem since day 1, when I reformatted the default Vista Home Premium to Windows 7 RC 64bit. (note: I do want to go back to my 32bit XP, was just trying out Win7)
Anyway, on to the problem. Basically it seems like the drive has a problem reading dvds/cds that I put in. Sometimes it works and sometimes it doesn't. When I reformatted from Vista to the Win7 RC, right at the beginning where the screen is black and there is a gray bar while Windows is "setting up/copying files" it stopped midway. I came back like an hour later and to no avail it was stuck there. I did a hard reboot and tried again. Worked flawlessly - was able to reformat just fine. It makes trying to install some of my games a hassle. I hardly can as a matter of fact. I'll get like 50% through a game installation and it just "freezes" up - I look at the drive and the light stops and everything, as if it just shuts down. Like I said though sometimes it works! I was able to get through my Pirates! installation no problem! (only cd-based game I was able to install however - I mostly use steam)
Also, I don't know if this is how the drive is meant to be, but it seems unusually hard to get the thing to close/stay in the computer. When I pop the tray out and try to close it I either have to slam it in or find some miracle way of getting it in because most of the time, just pushing it in with normal force as any other person would do, it will just quickly pop right back out - doesn't stay. I am mainly wondering if I just need to replace the drive? If so how do I go about doing that - or rather, which drives are compatible for installation with the gx630? (I would like to do it myself)
I hope this explains enough for someone to understand my problem or give me some insight. If not tell me anything more you would like to know.
Thanks!I have had this in Xp, Vista, and Win 7 RC
In most cases a PROJRAM screwed with the LowerFilters or UpperFilters regestry seettings.
My latest was changed by installing DVDFAB
How do I know? Because Lowerfilters changed from = to = DVDFAB
Delete that data and reboot. Should be ok then
Last month on vacation I could read a CD and DVD but inserting any blank media the drive would stop working.
Nothing resolved that but uninstalling every single burning and video editing application I had installed.
This problem is caused by two Windows registry entries that have become corrupted. To fix the problem, you have to use Registry Editor to delete the corrupted Registry entries. To use this method, you must be logged on to Windows as an administrator. If you need help verifying that you are an administrator, visit the following Microsoft Web site:
http://support.microsoft.com/gp/admin (http://support.microsoft.com/gp/admin)
Back to the top
Microsoft Windows Vista
1. Click Start
Collapse this imageExpand this image
Start button
, and then click All Programs.
2. Click Accessories, and then click Run.
3. Type regedit, and then click OK.
Collapse this imageExpand this image
User Access Control permission
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
4. In the navigation pane, locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
5. In the right pane, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 8.
6. On the Edit menu, click Delete.
7. When you are prompted to confirm the deletion, click Yes.
8. In the right pane, click LowerFilters.
Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
9. On the Edit menu, click Delete.
10. When you are prompted to confirm the deletion, click Yes.
11. Exit Registry Editor.
12. Restart the computer.
Microsoft Windows XP
1. Click Start, and then click Run.
2. In the Open box, type regedit, and then click OK.
3. In the navigation pane, locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
4. In the right pane, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 7.
5. On the Edit menu, click Delete.
6. When you are prompted to confirm the deletion, click Yes.
7. In the right pane, click LowerFilters.
Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
8. On the Edit menu, click Delete.
9. When you are prompted to confirm the deletion, click Yes.
10. Exit Registry Editor.
11. Restart the computer.
Now go to the "Did this fix the problem?" section. -
Problem with i915 Intel driver panic..
Hello,
I just recently reinstalled Arch on my laptop. I have a problem with my laptop. When I went to install the Nvidia Optimus stuff and configure my Xorg.conf I was met with problems with the Intel Driver timing out. When I boot up I get the normal post screen, then grub, I then go to see the GDM login and instead of getting it I just get a black screen. When I remove the /etc/X11/xorg.conf.d/10-monitor.conf I can boot into Gnome Shell, else I have to switch run levels and login that way. I have every package up-to-date. And I haven't seen an /var/log/Xorg.0.log either else I would have posted it. One other thing is I have added my user account to the Bumblebee account. One other thing is when I move my web browser around my video flickers.. Any help I can receive with this would be greatly appreciated.
uname -a
Linux tux 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64 GNU/Linux
pacman -q xf86-video-intel:
xf86-video-intel 2.99.916-3
pacman -Q xorg-server
xorg-server 1.16.1-1
pacman -Q primus
primus 20131226-1
pacman -Q mesa
mesa 10.3.1-1
pacman -Q lib32-primus
lib32-primus 20131226-1
pacman -Q bbswitch
bbswitch 0.8-18
pacman -Q gdm
gdm 3.14.1-1
pacman -q systemd
systemd 216-3
dmesg | grep i915
[ 1.982842] i915 0000:00:02.0: irq 36 for MSI/MSI-X
[ 2.099424] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 2.127859] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.127862] i915 0000:00:02.0: registered panic notifier
[ 2.147795] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel"
Driver "intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
Option "monitor-LVDS" "Monitor0"
BusID "PCI:0:2:0"
EndSection
/etc/X11/xorg.conf.d/10-keyboard.conf
Section "InputClass"
Identifier "Keyboard0"
MatchIsKeyboard "on"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbVariant" ",qwerty"
EndSection
/etc/X11/xorg.conf.d/50-synaptic.conf
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Intel"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
sudo lspci -v
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 36
Memory at d1400000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 7000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 6000 [disabled] [size=128]
Expansion ROM at d1000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel modules: nouveau, nvidia
xrandr -q
[adramalech@tux log]$ xrandr
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm
1366x768 60.05*+
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 380307af800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event1
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0001 Vendor=10ec Product=0665 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input6
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
U: Uniq=
H: Handlers=event5
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
U: Uniq=
H: Handlers=event6
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Dell WMI hotkeys"
P: Phys=wmi/input0
S: Sysfs=/devices/virtual/input/input10
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1500b00000000 200300000 0 0
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input11
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
U: Uniq=
H: Handlers=kbd event10
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0003 Vendor=0c45 Product=6430 Version=1208
N: Name="Laptop_Integrated_Webcam_2M"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=event12 mouse0
B: PROP=9
B: EV=b
B: KEY=6420 30000 0 0 0 0
B: ABS=260800011000003
glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile
OpenGL core profile version string: 3.1 (Core Profile) Mesa 10.3.1
OpenGL core profile shading language version string: 1.40
OpenGL core profile context flags: (none)
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.3.1
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.3.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
sudo glxgears -info
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
GL_RENDERER = Mesa DRI Intel(R) Sandybridge Mobile
GL_VERSION = 3.0 Mesa 10.3.1
GL_VENDOR = Intel Open Source Technology Center
GL_EXTENSIONS = GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip GL_ARB_point_parameters GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_framebuffer_sRGB GL_ARB_multitexture GL_EXT_framebuffer_sRGB GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat GL_3DFX_texture_compression_FXT1 GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_blend_func_separate GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_INGR_blend_func_separate GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_env_combine4 GL_S3_s3tc GL_SUN_multi_draw_arrays GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_compression_s3tc GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_depth_texture GL_ARB_occlusion_query GL_ARB_shadow GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_EXT_stencil_two_side GL_EXT_texture_cube_map GL_NV_depth_clamp GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_vertex_program GL_ARB_vertex_shader GL_ATI_draw_buffers GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_MESA_pack_invert GL_NV_primitive_restart GL_ARB_depth_clamp GL_ARB_fragment_program_shadow GL_ARB_half_float_pixel GL_ARB_occlusion_query2 GL_ARB_point_sprite GL_ARB_shading_language_100 GL_ARB_sync GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ATI_blend_equation_separate GL_EXT_blend_equation_separate GL_OES_read_format GL_ARB_color_buffer_float GL_ARB_pixel_buffer_object GL_ARB_texture_compression_rgtc GL_ARB_texture_float GL_ARB_texture_rectangle GL_EXT_packed_float GL_EXT_pixel_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent GL_ARB_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_packed_depth_stencil GL_APPLE_object_purgeable GL_ARB_vertex_array_object GL_ATI_separate_stencil GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_gpu_program_parameters GL_EXT_texture_array GL_EXT_texture_integer GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_OES_EGL_image GL_AMD_performance_monitor GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_instanced_arrays GL_ARB_map_buffer_range GL_ARB_texture_rg GL_ARB_texture_swizzle GL_ARB_vertex_array_bgra GL_EXT_texture_swizzle GL_EXT_vertex_array_bgra GL_NV_conditional_render GL_AMD_draw_buffers_blend GL_AMD_seamless_cubemap_per_texture GL_ARB_ES2_compatibility GL_ARB_blend_func_extended GL_ARB_debug_output GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_shader_texture_lod GL_ARB_texture_cube_map_array GL_ARB_texture_gather GL_ARB_texture_multisample GL_ARB_texture_query_lod GL_ARB_texture_rgb10_a2ui GL_ARB_uniform_buffer_object GL_ARB_vertex_type_2_10_10_10_rev GL_EXT_provoking_vertex GL_EXT_texture_snorm GL_MESA_texture_signed_rgba GL_ARB_get_program_binary GL_ARB_robustness GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_timer_query GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5 GL_ARB_compressed_texture_pixel_storage GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_texture_storage GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_transform_feedback GL_AMD_shader_trinary_minmax GL_ARB_ES3_compatibility GL_ARB_clear_buffer_object GL_ARB_copy_image GL_ARB_explicit_uniform_location GL_ARB_invalidate_subdata GL_ARB_texture_query_levels GL_ARB_texture_storage_multisample GL_ARB_vertex_attrib_binding GL_KHR_debug GL_ARB_buffer_storage GL_ARB_clear_texture GL_ARB_multi_bind GL_ARB_seamless_cubemap_per_texture GL_ARB_texture_mirror_clamp_to_edge GL_ARB_vertex_type_10f_11f_11f_rev GL_EXT_shader_integer_mix GL_INTEL_performance_query GL_ARB_conditional_render_inverted
VisualID 32, 0x20Hi
I assume you have installed the graphic card driver from the Intel website and you use NOT a Toshiba graphic driver which was designed especially for the notebook usage.
Well, Toshiba recommend using the Toshiba drivers. In this case you should try to use the recommended graphic driver which you can download from the Toshiba driver page. -
Photoshop has encountered a problem with the display driver
I rummaged around in here looking at opengl topics and others associated with the above error, but I'm not seeing what I'm encountering (or I am and I don't recognize it!).....
I bought CS4 a week or so ago, and installed it on a system running XP32 with service pack 3, 4GB of ram withe the /3GB switch set, nVidia 8600 GT card (which according to the list is supported), and multiple spindles for images, scratch, applications, and so on. I found other topics earlier so I downloaded the most recent drivers for my video card.
I'm not crashing and burning, but I'm getting some messages...
I opened an image, and while working on it I wanted to do a transform/warp. I got the message that Photoshop couldn't perform the operation because there wasn't enough memory. It didn't crash but I had to shut down CS4 and restart it to do the warp.
Most recently I opened a couple images for a panorama, and while doing the merge I got the message that "Photoshop has encountered a problem with the display driver and has temporarily disabled gpu enhancements." It tells me to check for the latest drivers - I've ALREADY got the lastest drivers. Again, no crash, just the warning. It completed the panorama.
There have been a couple other occurrences of messages of this type, so I'm curious if there's some set of preferences or system settting I need to adjust to optimize things? I've alrady adjusted the nVidia settings because I also run Lightroom and they're having problems too.
I've read the tech notes for the video and such and didn't find any set of optimizations there so is there a set of adjustments beyond the preferences that needs to be adjusted to improve memory and video performance? And if so, can someone point me to them.As I understand it (suspect at best) XP32 can address 4 gig of memory. the /3gb switch lets the applications get at 3 gig of that. If my video card takes the first 256MB, and XP is guaranteed the other 750 of the 1st gig, and in the CS4 performance preferences I should be giving it from 1462 - 1895 MB (I've given it around 1890), that leaves me with another gig or so... Is that limited to applications or can XP use it? In any case, I'm not crashing, I just get the message every so often about being out of memory. I don't recall ever seeing this with CS3, but new version, new oddities...
-
Photoshop CS5.1 Crashes Upon Opening: "Photoshop has encountered a problem with the display driver-"
Every time I try to open photoshop I get a window that pops up and says:
"Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software.
GPU enhancements can be enable in the Performance panel of Preferences."
Then windows shuts the program down. The details of the problem are:
"Files that help describe the problem:
C:\Users\Owner\AppData\Local\Temp\WER70AD.tmp.WERInternalMetadata.xml
C:\Users\Owner\AppData\Local\Temp\WER9389.tmp.appcompat.txt
C:\Users\Owner\AppData\Local\Temp\WER9407.tmp.hdmp"
I'm on a custom Asus
I'm using Win7 Home Premium 64-bit
16GB RAM
Nvidia Geforce GTX 560 2GB video card
Intel i7 core 2.2 GHz
12 GB of memory
The error happens so quickly that I don't have time to do anything. Please help. >.< I've been on hold for *checks phone* 2 hours exactly. Wow. It is a legit copy and was working last month with no trouble. I've updated the drivers and tried a few solutions that have worked for other people that I found on Google (such as disabling CUDA and setting my "power management mode" to "prefer maximum performance" on my video card) but so far nothing has worked.
Thanks in advance!It has stopped crashing because somehow it turned off "Enable GL Drawing" on its own because I could never even get a menu open. Not sure how it did that but I am grateful. I still get the error when I open Photoshop up but at least it hasn't crashed yet. At the time when it was crashing I never would have been able to get you the system info due to the speed that it was crashing upon just opening the program. In case you still need it:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 16361 MB
Free memory: 13322 MB
Memory available to Photoshop: 14694 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Detected.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560M/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560M
Driver Version: 9.18.13.697
Driver Date: 20121002000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560M
Video Card Memory: -2047 MB
Serial number: 92628077745082451425
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\
Temporary file path: C:\Users\Owner\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.4G, 511.4G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2010/12/13-23:37:10 64.449933 64.449933
adbeape.dll Adobe APE 2011/01/17-12:03:36 64.452786 64.452786
AdobeLinguistic.dll Adobe Linguisitc Library 5.0.0
AdobeOwl.dll Adobe Owl 2010/06/03-13:43:23 3.0.93 61.433187
AdobeOwlCanvas.dll Adobe Owl Canvas 3.0.68 61.2954
AdobePDFL.dll PDFL 2010/12/13-23:37:10 64.341419 64.341419
AdobePIP.dll Adobe Product Improvement Program 5.5.0.1265
AdobeXMP.dll Adobe XMP Core 5.0 64.140949
AdobeXMPFiles.dll Adobe XMP Files 5.0 64.140949
AdobeXMPScript.dll Adobe XMP Script 5.0 64.140949
adobe_caps.dll Adobe CAPS 4,0,42,0
adobe_OOBE_Launcher.dll Adobe OOBE Launcher 2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
AFlame.dll AFlame 2011/01/10-23:33:35 64.444140 64.444140
AFlamingo.dll AFlamingo 2011/01/10-23:33:35 64.436825 64.436825
AGM.dll AGM 2010/12/13-23:37:10 64.449933 64.449933
ahclient.dll AdobeHelp Dynamic Link Library 1,6,0,20
aif_core.dll AIF 2.0 53.422628
aif_ogl.dll AIF 2.0 53.422628
amtlib.dll AMTLib (64 Bit) 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
amtservices.dll AMTServices (64 Bit) 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
ARE.dll ARE 2010/12/13-23:37:10 64.449933 64.449933
asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1
AXE8SharedExpat.dll AXE8SharedExpat 2011/01/10-23:33:35 64.436825 64.436825
AXEDOMCore.dll AXEDOMCore 2011/01/10-23:33:35 64.436825 64.436825
Bib.dll BIB 2010/12/13-23:37:10 64.449933 64.449933
BIBUtils.dll BIBUtils 2010/12/13-23:37:10 64.449933 64.449933
boost_threads.dll DVA Product 5.0.0
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2010/12/13-23:37:10 64.449933 64.449933
data_flow.dll AIF 2.0 53.422628
dvaadameve.dll DVA Product 5.0.0
dvacore.dll DVA Product 5.0.0
dvaui.dll DVA Product 5.0.0
ExtendScript.dll ExtendScript 2011/01/17-17:14:10 61.452840 61.452840
FileInfo.dll Adobe XMP FileInfo 5.0 64.140949
icucnv36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
icudt36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
image_flow.dll AIF 2.0 53.422628
image_runtime.dll AIF 2.0 53.422628
JP2KLib.dll JP2KLib 2010/12/13-23:37:10 64.181312 64.181312
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1263
MPS.dll MPS 2010/12/13-23:37:10 64.450375 64.450375
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.4940
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.4940
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.4940
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS5.1 CS5.1
Plugin.dll Adobe Photoshop CS5 CS5
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 2.5.0.232
PSArt.dll Adobe Photoshop CS5.1 CS5.1
PSViews.dll Adobe Photoshop CS5.1 CS5.1
SCCore.dll ScCore 2011/01/17-17:14:10 61.452840 61.452840
tbb.dll Threading Building Blocks 2, 1, 2009, 0201
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 2.0.0.15
WRServices.dll WRServices Thursday January 21 2010 12:13:3 Build 0.11423 0.11423
wu3d.dll U3D Writer 9.3.0.113
Installed plug-ins:
3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Accented Edges 12.0
ADM 3.11x01
Angled Strokes 12.0
Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Bas Relief 12.0
BMP 12.0.2
Camera Raw 6.7
Chalk & Charcoal 12.0
Charcoal 12.0
Chrome 12.0
Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Color Halftone 12.0.2
Colored Pencil 12.0
CompuServe GIF 12.0.2
Conté Crayon 12.0
Craquelure 12.0
Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Crop and Straighten Photos Filter 12.0.2
Crosshatch 12.0
Crystallize 12.0.2
Cutout 12.0
Dark Strokes 12.0
De-Interlace 12.0.2
Dicom 12.0
Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Diffuse Glow 12.0
Displace 12.0.2
Dry Brush 12.0
Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Embed Watermark 4.0
Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Extrude 12.0.2
FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Fibers 12.0.2
Film Grain 12.0
Filter Gallery 12.0
Fresco 12.0
Glass 12.0
Glowing Edges 12.0
Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Grain 12.0
Graphic Pen 12.0
Halftone Pattern 12.0
HDRMergeUI 12.0
IFF Format 12.0.2
Ink Outlines 12.0
JPEG 2000 2.0
Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Lens Blur 12.0
Lens Correction 12.0.2
Lens Flare 12.0.2
Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Liquify 12.0.1
Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mezzotint 12.0.2
Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mosaic Tiles 12.0
Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Neon Glow 12.0
Note Paper 12.0
NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Ocean Ripple 12.0
OpenEXR 12.0.2
Paint Daubs 12.0
Palette Knife 12.0
Patchwork 12.0
Paths to Illustrator 12.0.2
PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Photocopy 12.0
Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Pinch 12.0.2
Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Plaster 12.0
Plastic Wrap 12.0
PNG 12.0.2
Pointillize 12.0.2
Polar Coordinates 12.0.2
Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Poster Edges 12.0
Radial Blur 12.0.2
Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Read Watermark 4.0
Reticulation 12.0
Ripple 12.0.2
Rough Pastels 12.0
Save for Web & Devices 12.0
ScriptingSupport 12.1
Shear 12.0.2
Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Smart Blur 12.0.2
Smudge Stick 12.0
Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Spatter 12.0
Spherize 12.0.2
Sponge 12.0
Sprayed Strokes 12.0
Stained Glass 12.0
Stamp 12.0
Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Sumi-e 12.0
Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Targa 12.0.2
Texturizer 12.0
Tiles 12.0.2
Torn Edges 12.0
Twirl 12.0.2
U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Underpainting 12.0
Vanishing Point 12.0
Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Water Paper 12.0
Watercolor 12.0
Wave 12.0.2
Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Wind 12.0.2
Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Access CS Live
CS Review
Installed TWAIN devices: NONE -
My Windows 7 Ultimate {32bit} does not install driver for my LG HDD HXD5 320GB
My windows 7 does not install driver for my LG EXTERNAL HDD HXD5 320GB & its attached using a USB.
It works perfectly on Other computers having Windows 7 & Windows XP & Windows Vista, just doesn't work on mines.
I have had internet connected when it was installing hence it got the opportunity to search Windows Update for it but it fails :(
It works even on my computer ( I have DUAL OS) on windows XP SP3 but i need it to work in Windows 7.
Please help Thanks :)
& i have already tried tried the solution which was proposed for another topic in this forum on which it was to Uninstall the driver using Device Manager and unplug the HDD and attach again and let the computer detect and install it again, my computer
does detect it but fails to install the drivers.
My Computer has a 2GB of RAM & 2.40GHZ (32bit) with an Intel Core 2 Duo Processor and had come with Windows Vista Home Premium 32bit installed, & i upgraded to Windows 7 Ultimate 32 Bit which is completely updated to all the Updates that Microsoft
had offered (using the built in Windows Update in Control Panel)
I have got screen shots of it too.
http://shumayal.fileave.com/HDD.zip
PS: Same is the case with some of my USB Flash drives, but in their case they don't get detected at all but get in Windows XP SP3 (which is another OS on my pc) as well as on windows 7 and other OS on OTHER COMPUTERS but not mines in Windows 7.
Thanks :)Hi,
I recommend you try to update the BIOS and the motherboard chipset drivers for Windows 7 firstly.
After that, please refresh the USB Stack:
Control Panel – Device Manager – USB Serial Controllers – Right Click on EVERYTHING and UNINSTALL all except the category itself – Reboot
. This refreshes the drive and the USB stack
Then, right click on the LG EXTERNAL HDD HXD 5 320GB in Device Manager and select Update Driver Software.
You may also try the Windows 7 built-in
Hardware and Devices troubleshooter.
Hope it can help you!
Best Regards,
Miya Yao
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread. -
Error installing Driver for audio device in MS-6585 Motherboard
Hi,
I have MS-6585 Max L motherboard. I installed windows 2000 with SP4. When I tried to install driver for the audio device, it always fails with the following error.
An error occurred during the installation of the device.
The data is invalid.
And in the Device status in the properties menu
The drivers for this device are not installed. (Code 28)
I tried to download the latest driver using the "Live Update" and it didn't help. I tried few other options suggested in the web.
The usual cause of this problem in Windows 2000/XP systems is Registry keys that are set as read-only.
From the Start menu, click Run and enter RegEdit to run the Registry Editor. Open the following - Keys => HKey_Local_machine => System => CurrentControlSet => Enum => PCI.
You will see several keys in this form - Ven_xxxx - where xxxx represents a string such as - 1102&Dev_004&Subsys_00011103&Rev_04.
In each of these folders there is another folder that has a long numerical name. Open each of these folders, and look for the DeviceDesc entry that matches the type of hardware that you are trying unsuccessfully to install. Use the right mouse button to click on the Ven_xxxx entry for that device, and click Permissions. If it is set to read-only, then that is the cause of the problem. To rectify it, change it to Allow Full Control.
I'm stuck and I am not sure what else to try. Its not clear to me where the problem is. Is there any log I can look? Any other suggestions please
BTW, It used to work..I had to reinstall windows 2000 and after the clean/format reinstallation it stopped working.
thanks for any help
SureshIt might be that the drivers are for WinXP. Are you 100% sure they are for 2000? Can you get a copy of XP, it would prabobly solve youre problem.
-
Previously having OS 10.2, I tried to install 10.4 from an installation disc over 10.2, and it failed to install. After failing to install, the computer made me restart, and now it goes to a screen giving an error about a Mac OS 10.4 and 10.5 Driver. The Computer can't find drivers for 10.4 and 10.5. I cannot boot from an Apple I-care disc, the machine tries to boot into an OS, but there is a question mark, instead of an OS Icon in the middle of the screen, and then shortly after comes the error message. The machine locks up.
I thought maybee the problem was intalling OS10.4 as an update, because there was a gap between version previously installed and the new one, but the installation guide says OS 10.2 or later is updatable.
Please Help.Hi Brandon,
If you are not able to start up from your installation DVD there might be a problem with your DVD drive.
If this is the case then there are two things you might do:
1- (and most obvious) take your Mac in for repair.
2- Fire Wire Target Disk Mode... (For this option you will need a second Mac)
- Target Disk Mode will basically turn your iMac into an external HD, by doing this you will be able to use a second Mac with a working disc drive to start up from the Tiger DVD and then install it on your iMac.
If you are going to do this it is important that no other FireWire devices are connected to either of the computers.
How to start your iMac in Target Disk Mode: Start up the computer and immediately press and hold down the T key until the FireWire icon appears.
Once you have done this connect it to the second Mac (with FireWire)
Now insert the Tiger DVD in the second Mac, when the disk appears on the Desktop open it and double click on "install"
A window with a restart button will appear... click and restart (there will be no need to hold the "c" key.
Once the computer has started up from the Tiger DVD you need to find UTILITIES or TOOLS (i can remember the exact name) on the top bar
Click on it and open Disk Utility then follow the steps of my previous post.
Make sure that you have selected the correct HD to erase and install (it will not be the first one on the list)
Good Luck.
S -
Mac Pro Early 2008 problems with firewire 400 drives
I am having some sporadic problems with firewire 400 drives and am trying to figure out my best options going forward. System 10.5.2 has hung on me twice in the first week of use, and each time I noticed from console there were some problems accessing one or more of these drives (even though I wasn't doing any reads/writes to/from them). Just before one of the crashes, Disk Utility also had problems "seeing" these drives. My external firewire drives are:
Maxtor OneTouch III 750GB
Acomdata enclosure/Seagate 400GB
LaCie d2/160GB
LaCie w/Lightscribe DVD
I have this "cobbled" arrangement because I just upgraded from an eMac and needed these drives to manage video files, audio files, photos, etc. While I'd love to go out and buy new internals to install in my spare bays, and migrate the data to them, I will have to do that in stages as my budget is tapped out at the moment. My MacPro is the base version of the early 2008 units, with 300GB internal.
In the interim, is it worth troubleshooting firmware updates for these externals, or am I destined to continue to have firewire problems? Is there a straight-forward/inexpensive way to remove these drives from enclosures/install in drive bays with an adaptor? I believe the external hard drives are all ATA type drives.
Thanks in advance for any counsel.I would assume that the Maxtor may be SATA. Does it have an eSATA port? Also, there were a lot of threads (in OS X Leopard forum) about those OneTouch units. Same can be said for LaCie problems.
Yes, check for firmware and configuration. In some cases, and what I do with any new OS, is to reformat all drives - gradually. Given the age of the eMac I'd guess firmware is out of date, and that the drives are formatted some time ago. While you don't have to use GUID, it is a good idea eventually, or just reformat a drive.
Don't forget to test your drives with Disk Warrior (4.1) also.
750GB WD Caviar is $139 SATA.
http://eshop.macsales.com/Specials/XLR8YourMac.cfm?Criteria=&sort=&man=Western%2 0Digital
Are you using daisy chains? you have one FW bus shared by front and back ports. Do you have any on FW800 or using FW400 to FW800 adapter cable? PCI Express FW400 card might even help a little.
Never had trouble with OWC enclosures:
http://www.macsales.com/firewire/
Maybe you are looking for
-
HOw to get rid of the borderline in the render list item of the news brows
HI, HOw to get rid of the renderlist border line, Give Feedback link Send To link in the news browser. After removing thiese things, it should look like a normal html page . how to achive this , if coding required then which is the par file I n
-
Videos won't play in iTouch, but will in iTunes.
Before I upgraded, I was able to play all my videos (properly formatted of course), on my iTouch. Now with the software upgrade, I am able to play the videos in iTunes, but when I attempt to play them on the iTouch, it says "This movie could no be pl
-
Output Preview showing confused results
Hello all, Please bear with me as I attempt to explain a very odd occurrence I am seeing in Acrobat X. Also, my assumption is that this is something in the authoring tool confusing Acrobat, as if I attempt this using only Adobe products I cannot repl
-
Stutter after burning blu ray and during viewing in encore
i changed one effect in the project in premiere and i noticed it stutters at that spot in encore as well as after i burn it on blu ray can anyone help ?
-
Je ne suis pas capable de connecter mon ipod touch sur le web
J'ai besoin de conseils . Je viens d'acheter un ipod et je ne suis pas capable de me connecter Pouvez-vous m'aider?