Problems with Vista SP1 B

Hi,
i installed the sp beta and now there comes no sound from the front speakers (teufel 7. + audigy2zs). i tried kx drivers, creative drivers, but no solution for the problem... how do i install the original MS drivers (where can i find them)?
or could someone help me to solve this problem?
thanks

problem solved

Similar Messages

MacBook Pro sleep problems with Vista SP1

Has anyone faced sleep problems on a MacBook Pro after installing Vista SP1?
I run Boot Camp 2.0 with the latest update from Apple.
IDT finally issued a compatible Vista driver for my Sigmatel audio.
I was very happy for the first time running Vista on my Apple when I had the stupid idea to upgrade to SP1.
After days of troubleshooting with Windows support it is obvious that SP1 and my MacBook Pro are incompatible for some obscure reasons. The latest time I tried SP1 was through Windows Update, which means that Windows detected no compatibility issues, such as drivers.
I suspect Apple-in-sight driver without any evidence, just a hint.
Any ideas?
Thanks

Hibernation seems iffy. Have you tried disabling hibernation? and when you say sleep, what happens? won't wake or what?
Normally I don't recommend resetting NVRAM or SMU but for sleep you might want to.
And yes, trying to rule out why can be difficult. But I would not blame SP1. Maybe BC 2.1.
Do you have a book dealing with Vista? or looked for articles or forums that deal with Vista? There is one for Vista64 - assume you have 32-bit though. Google is often best way to find things in Apple discussions or knowledge base, too.
http://www.google.com/search?ie=utf8&oe=utf8&q=Vista+sleep

Problem with vista and 5.1

problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]

My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.

Airport Extreme Utility problem with Vista (works with XP, MacOS)

Hi,
I just setup a new Airport Extreme network at my house, and most things are working fine. I have wirelessly connected at various points an Airport Express (using WDS), a MacBook Pro (OSX) and an IBM Thinkpad. I have several wired machines as well.
My problem: The wired machine I use to configure and setup everything is a Vista Ultimate machine. Unfortunately, the Airport Utility won't connect to the Airport Extreme (or Airport Express for that matter) from Vista. The utility works fine from XP or OSX, but not from Vista. Note that I'm using this in a wired capacity. The Vista machine is directly connected to the Airport Extreme, while several other machine are connected through a GBit switch.
Any help would be much appreciated? Is this a Vista security problem or an Airport Utility problem with Vista?

It's most likely a security issue with Windows Vista. Vista has the ability to set "compatibility modes" for applications.
Try:
1. right mouse clicking the Airport Utility's .exe file.
2. Click the Compatibility tab. Change the Compatibility mode to Windows XP (Service Pack 2).
3. Now go down to "Privilage Level" and check the "Run this program as an administrator"
Apple never tells you this but you must connect to the Airport Extreme wirelessly. Now run the Airport Utility. You should see it.

Acrobat Problem with Vista X64 OLE calls

Acrobat Problem with Vista X64 OLE calls - CreateObject("AcroExch.AVDoc") does NOT open its window in the CreateObject("AcroExch.App") - but opens a new (invisible) window. Works correctly in XP x64 and 32 bit Vista - happens with Acrobat v8 and v9.

Again, I contend that something changed between 8.1.2 and 8.1.3.
refer to http://www.adobeforums.com/webx/.59b6fe7c
To show the viewer, use the show method after the document is opened.
In 8.1.2 you did not have to perform this extra step.

T61 - problem with Vista x64 NVS 140M drivers

Hi!
I have problems with Vista x64 and NVS 140M drivers. Thing is that if I install them, everything will be slideshow, even the audio shutters quite bad and CPU is constantly over 45%. I have tried different driver versions but nothing has helped yet. Any ideas?
I wonder if anyone has the old 7.15.11.0129 driver and could send it to me? Maybe that would help.

Try the following test:
- Go to Vista Sound Control Panel to view the S/PDIF out properties.
- Click on the Supported Format tab page, select Dolby Digital and click Test.
Is the test OK?

Treo Pro will not sync with Vista SP1

I'm really hoping somebody can help me here. I just replaced my aging 700p with the long-awaited Treo Pro (Sprint). I've actually been looking forward to getting fully Windows-based, since my 700p syncing was routinely problematic - always having to do workarounds and plug in the cord just the right way, etc...
Let me try to give you the flow so far.
I have Vista SP1
I get Treo Pro
I plug Treo Pro into Vista, SP!, all ready to sync up my Outlook 2007 data.
Treo Pro fires up a very impressive looking installation routine.
Routine seemingly works fine - getting me to the point where you unplug and reconnect your device to do your first sync
I reconnect, and hear the Windows "USB connect" sound, then.... nothing.
I open WMDC and it says "not connected"
I open "USB to PC" on the Treo, and uncheck the "advanced networking" box as suggested by some other posts.
Windows sees the difference and installs a couple of other drivers.
Windows connects, gives me the "USB connect" sound, and WMDC says "not connected"
The Treo appears to attempt a sync, but finishes with a message "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer. "
HUH? ActiveSync only works with XP - of course I can't install that!
By the way, I tried the same thing with my Vista SP1 laptop. Same exact results.
Also, at no time have I seen the WMDC icon in the tray area. (I remember having a Nino way back when, and the ActiveSync icon was down there)
I thought this was supposed to be easy - Windows PC, Windows device. Piece of cake, right? Not so. If I cannot get this thing to connect, I'm getting a Centro! (not my first choice....)
A thought... any chance this could have to do with having Palm Hotsync still installed (from my Treo 700p)?
Any help would be GREATLY appreciated!
Post relates to: Treo Pro T850 (Sprint)
Message Edited by finalewiz on 03-29-2009 09:02 PM

On Windows XP, having HotSync installed didn't interference with using ActiveSync with a Treo 800w. This is not exactly the same as your setup, but close enough that I think HotSync is not likely to be the problem.
How did you install WMDC? The downloadable User Guide (PDF pp44-46) refers to running the PC Setup program. Did that part go as expected?
I don't use Vista, so I'm not familiar with the additional complications that might be involved...
Post relates to: Treo 800w (Sprint)

Login problems with Vista

I have a 10.4.11 OSX server as an OD Master.
All my OSX and WinXP clients can authenticate without problem.
I received a new computer with Windows Vista Ultimate x64 SP1. I was able to make it join my domain without problem but when I try to log in, I get the following error " Procedure number out of range".
IMHO, I believe the problem is with a default config in Vista x64 more that a problem with my server.
Has anyone seen this kind of error before?

I have a 10.4.11 OSX server as an OD Master.
All my OSX and WinXP clients can authenticate without problem.
I received a new computer with Windows Vista Ultimate x64 SP1. I was able to make it join my domain without problem but when I try to log in, I get the following error " Procedure number out of range".
IMHO, I believe the problem is with a default config in Vista x64 more that a problem with my server.
Has anyone seen this kind of error before?

Equium A100-060 touchpad doesn't work with Vista SP1

Hi, my touchpad doesen't work in Vista with SP1. If i use Vista or any other operating systems the touchpad works without any problem.
The driver installed on Vista Sp1 is the last available.
How can I solve this?

Hi!
Did you disable the touchpad with FN keys?
On my Satellite L300 its FN+F9
Do you have yellow marks in the device manager?
Did connect an external mouse and does it works?
Bye

T60P - problems installing Vista SP1

I own a T60P with pre installed vista business. When I try to install a vista sp1 it gives me the following massage 0x800703ee and stop installation process. As well the ThinkVantage system fails to install and update module (32 bit) to vista through the download center- are2 problems connected? Can anyone help me solve it? Thanks

Make sure your system is up to date by using System Update.
T60: 6371-CTO, VISTA Home Premium+SP1, 2GB....R51: 1836-Q4U,XP,1GB...600...755CD

Problems with Vista/JRE 6

I have Java RTE 6, Version 3 on my computer but websites do not recognize it
and it's not even in my program toolbar. I went to get the firefox plugin
from the Java website and while it was testing my JRE, it couldn't find it on
my system. So, I go to install it and it says its already been installed. I
have reinstalled this about 3 times and still nothing when I get to java
websites. It's just a white screen where the java applet is supposed to be
running. I've tried on IE also and it doesn't work there either.
Very frustrating....can anyone help?

I also have a similar problem--compability problem with JRE6.interfers with display driver somehow have reached this conclusion by the process of elemationmy computer is a new HP and has been to their shop for repairs 4, get that, 4 times--HP has been unable to find a solution, microsoft doesnt have one and intel (intel 945G) says i have a software problem i have disabled java and havent had this problem--i have uninstalled and reinstalled - doesn't help situation at all-- i have searched all help centers i could find--no info- latest entry (upon last installation) in my problems and solution program was compatibilty problems with no solutions--i am running vista home basic,have 2GB Kingston memory modules installed-don't know what else to tell you-PC just returned from HP repair shop, they ran all stress tests and everything checked out ok-thanks

Problems with Vista Drivers on Satellite M100 (PSMA1E)

Hello,
I got Problems with installing the Vista Driver for the Graphic Card and the Realtek Sound Card.
I downloaded the Drivers from the Toshiba-Support Side! The Realtek Driver couldnt be installed because of some missing file! The CCC wouldnt run correct after installation! I got Vista Buisness!
Greets, kalest

I fixed the Sound Problem for myself:
The Realtek Site offers drivers for the HD-Soundchip. I installed them and now i got HD Support on Vista!
The Problem with the Cata.Control Center still exists!
Greets, kalest

Problems with Vista Contacts (partner problems :P)

I don't think I had any problems with the previous version of Nokia PC Suite to transfer my Vista Contacts. But that version did not support pictures (which I really wanted to have). So I upgraded to 6.83.14.1 which supports pictures. Though first of all pictures seems to be kind of buggy and refuses to transfer the contact if the photo is too big (have no idea if it's dimensions or size though).
But my prime problem is that it refuses to transfer some of my contacts. I tried to find some connection between those that didn't transfer and found that all of them seems to be couples where only one of the partners transferred. They have the same address etc. (though mobile numbers can differ). But strangest is that my parents have both been transferred (and they to share everything except mobile phone numbers). Oh, and all have pictures too.
Does anyone have any ideas how to solve this? Any help is appreciated.

hi. i had the same. but try this (works with me):-
open pc suite, synchronisation, then click settings.
pc application click create new, then instead of vista select "outlook express (windows address book) " then next page select default.
this should do it for some reason. now ALL my contacts have synched instead of half of them.

New iTunes, same sync problems with Vista

Hi
I got really excited when I saw in the fixes for the latest iTunes 8.1 for Windows that they had fixed sync problems with iPhones. They haven't!
On Vista Ultimate the sync has always been a problem, with either OutlookSyncClient or AppleMobileSync (or both) frequently crashing. With the previous couple of versions of iTunes, in my case, it has happened every third or fourth sync. Now with the new version it is almost every sync. It took me five disconnect and reconnect attempts and a couple of reboots to succcessfully sync this morning.
I've tried every fix I can find on line. I read that the Outlook sync problem was caused by an incompatibility with pst files that were not unicode. Oddly, I wasn't supposed to be able to sync with an old pst at all, but it did work erratically. Converting my pst to unicode didn't make any difference.
With the AppleMobileSync problem, I read that completely removing all Apple software in a particular order, restarting each time between removals, then clean reinstalling, should solve the problem. It didn't.
Now the problem is even worse and I'm at my wits end on it. Come on Apple, get a grip!
If anyone can shed any light on this I would be really grateful!
Tim P

Hi
I got really excited when I saw in the fixes for the latest iTunes 8.1 for Windows that they had fixed sync problems with iPhones. They haven't!
On Vista Ultimate the sync has always been a problem, with either OutlookSyncClient or AppleMobileSync (or both) frequently crashing. With the previous couple of versions of iTunes, in my case, it has happened every third or fourth sync. Now with the new version it is almost every sync. It took me five disconnect and reconnect attempts and a couple of reboots to succcessfully sync this morning.
I've tried every fix I can find on line. I read that the Outlook sync problem was caused by an incompatibility with pst files that were not unicode. Oddly, I wasn't supposed to be able to sync with an old pst at all, but it did work erratically. Converting my pst to unicode didn't make any difference.
With the AppleMobileSync problem, I read that completely removing all Apple software in a particular order, restarting each time between removals, then clean reinstalling, should solve the problem. It didn't.
Now the problem is even worse and I'm at my wits end on it. Come on Apple, get a grip!
If anyone can shed any light on this I would be really grateful!
Tim P

Airport Express problems with Vista

I have read on here that people are running the express with Vista an I am not sure how? I loaded the disk and everything come up but the Airport setup assistant. When I open the Airport asmin utility it is blank. I am not sure how to get this up and running any help is appriciated.

I have the exact same problem trying to connect my Airport Express to my Vista laptop. I managed to get around it by using the Admin Utility, choosing "Other..." and then entering the router IP (for me 10.0.1.1) and password "public".
However after I have enabled WPA2 Security the connection does not work that good. After a short while throughput is degraded and then it drops the connection completely.
Is Airport Express supposed to work with Vista or what am I doing wrong?
HP Pavillion Vista Other OS

Problems with Vista SP1 B

Similar Messages

Maybe you are looking for