Problems with waking from standby (suspend to disk)

Hello,
I have a late-2010 MacBook Air 11.6". I am running Lion 10.7.2.
To save battery life and also increase data protection via FileVault 2, I set the hibernatemode to 25 (alwas immediately suspend to disk) and enabled destruction of the FV key on standby (pmset -a hibernatemode 25 DestroyFVKeyOnStandby). Suspending works fine; and when I open the lid to resume from standby, I get the password prompt for FileVault's full disk encryption. After entering the password, the resume process starts. But then in some cases, my display stays black and I cannot turn it on again (tried closing/opening the lid, pressing Ctrl+Shift+Eject, connecting external monitor, ...)
If this behavior occurs, I can find entries like the following in my kernel.log:
Dec 23 13:30:15 mba kernel[0]: NVDA::setPowerState(0xffffff800c6b3000, 0 -> 2) timed out after 61662 ms
Is that a hardware bug? Any idea how I could possibly work around it?
Any help would be greatly appreciated!
Best Regards

Hi Aaron,
Check this blog and follow the steps mentioned, let us know if it works:
Something happened and the install of Windows 8.1 can't be completed. (And now you're annoyed)
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

K8t Neo2 problem with resume from standby after BIOS flash

Previously while using the 3.2 BIOS and a Winchester 3200+, Both Standby and hibernation worked perfectly almost without fail. Since I flashed the BIOS to 9.3 and installed an X2 4200+ I have had a problem with resume from standby. The machine starts up OK but the 2nd processor core (cpu1) is almost maxed out and stays that way. Task manager shows total cpu load as about 45-50% (all on cpu1) but shows no running process using any cpu load, just the usual System Idle process at about 99%. The only way to get it back down to normal again seems to be to reboot. By Contrast Hibernation works fine, with no increase in cpu load after resume. I have all the latest MS patch's installed (I think!) the AMD dual core driver and the MS and AMD dual core optimizers. Any ideas what is going on?

Noticed last night that S! standby seems to work OK. Also was experimenting with a fresh windows install on a spare hard drive (checking on another problem). The fresh windows install appeared to work with S4 hibernation, so it looks like that is the answer to that problem. However the problem with high cpu load on the second core after resume from S3 suspend to RAM standby was still present. This problem is so specific and so repeatable (it does it every time without fail), that I feel there must be some very well defined reason for it. Unfortunately I have no ideas what could be wrong. Have now tried Windows re-install, latest cpu drivers, AMD dual core optimizer, MS dual core optimizer, Cool'n'quite disabled/enabled, and various others and suspend to RAM still gives the same behaviour

Windows 8.1 Problem with games from windows store.

I've got a problem with games from windows store. The installation is going well without any problems, however when I try to open it it's loading and then it turns off. The same problem happens when I try to use Games for Windows. I've use a sfc scan and
it shows some errors but unfortunately it cannot fix them. Should I share the CBS log or find the solution somewhere else? I hope you help, best regards.

Hi,
According to my experience, the problem like store game app open failed probably caused by hardware driver. such as Audio and Graphic driver. So, first of all, please try to reinstall these two driver to fix this problem for test.
In addition, for SFC scan failed problem, it can be caused by many reasons, I would suggest you use another command to fix your system for test.
Dism /Online /Cleanup-Image /ScanHealth
Also you can test SFC command in Windows 8.1 safe mode.
Thirdly, if problem persists, please check Event Viewer, generally speaking, it would record the app open failed events.
Roger Lu
TechNet Community Support

I have problem with buying from iTunes Store

I have problem with buying from iTunes ??!!
I've put all of my info cards
What can i do ?!

Are you trying to spam the forum with 6 the same posts?
Please give more details of your problem and answer the question below:
Is the app available in your country?
Are you using the App Store for your country?

Hi. I have a problem with downloading from app store while last three days. An error did mot allow me to that. It's number is 1009.

I have a problem with downloading from app store while last three days. An error does not allow me to take any app. The error number is 1009.

Thats the ugliest code I've seen in a while and may be hampering your abilities to debug it. No offense - you have to start somewhere - think of it as somewhat constructive criticism.
However, I cannot find any place where this is happening. Its happening on line 193.
Also, this only happens when you try to move certain pieces to certain squaresThat might be a clue. Try printing out the indexes before line 193 and see what happens. Maybe use a debugger to step through your code.

Problem when waking from sleep

Hi all, my mbp has real problems when waking from sleep - I hear the dvd drive do something, the screen comes on but remains black, and then nothing else - no keys work, only holding the power button has any effect.
I have a screensaver password on.
Anyone heard of this before or have any ideas?
Thanks!

It might also be worth trying the following:
Reset PRAM and NVRAM: http://support.apple.com/kb/HT1379
Reset SMC: http://support.apple.com/kb/HT1411

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

Move or Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.

Problems when waking from sleep with display

Okay, so I have a Dual 1.8 G5 with an upgraded ATI Radeon 9800 Pro graphics card that I've had in it for over a year now. I just bought a new monitor, a Viewsonic 22" widescreen LCD to replace the 17" viewsonic CRD I had. Now, i get occasionally some random noise or something when the computer wakes from sleep that disappears most of the time if I turn the monitor off and back on.
Now does anyone have a thought as to if this is a problem with the monitor (i.e. should I take it back) or a problem with the card.
Thanks

Paul Pardue-
How is the monitor connected to the card? Have you verified that all of your connections are secure?
What does the noise look like?
Luck-
-DaddyPaycheck

Anyone's MacPro have problems after waking from sleep mode?

After waking from sleep, my MacPro 2x2.4 Quadcore Intel Xeon freezes in several applications that had been running before sleeping. Mail and Firefox both get into endless loops trying to download data and will not force quit. Pulldown restart and shut down do not function when this is occurring. Must shuyt down manually from box and start again. Everything works fine again until it goes to sleep again.

Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

Problems when waking from long sleep periods

Suddenly this morning my iMac developed a problem when recovering from a long period of sleep. I'm having trouble finding a solution.
I have my iMac set to ask for password when it recovers from sleep or screen saver. When I woke my iMac this morning the password dialog box appeared at the top of the screen as a garbled mess. If I put my iMac back to sleep and then wake it again it usually solves the problem.
I don't want to turn password verification off. Has anyone seen this problem before? Any suggestions on what might be cause?

funkyblue:
I usually leave my Pismo on and allow it to sleep. I find that waking from sleep and general functioning of the computer works a lot better if from time to time (I do it at least weekly) I shut down the computer, start up in Safe Mode, log in, empty Trash and reboot normally. The emptying Trash part clears the font caches.
You should consider doing other maintenance procedures, if you don't already. Gulliver's Mac OS X System Maintenance has good ideas with linked resources.
Please do not hesitate to post back with further questions or comments.
Good luck.
cornelius

T400 - frozen mouse and keyboard after waking from standby

I'm experiencing a very annoying problem on my T400 with Win XP Professional SP3: around 75% of the time, when I wake up my T400 from standby mode, the mouse and keyboard don't work. Actually what happens is one of these situations:
1) Neither keyboard nor mouse (stick and pad) respond - Ctrl-Alt-Del to enter username/password is not registered, I can't log into Windows
2) Keyboard works (I can log into windows) but mouse doesn't respond
I have to close the laptop to standby and re-open, repeatedly, until it finally works. Though one interesting aspect is that if I have external USB keyboard and mouse plugged in, they always work.
Anyone have any ideas? Thank you in advance!

Hello jsolomin and welcome to community,
Kindly update the BIOS and then check if the issue gets resolved.
BIOS Update (Bootable CD)
BIOS update utility for Windows 32-bit
BIOS update utility for Windows 64-bit
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Connection problems after waking from sleep????

I'm having a strange issue with my 2012 Macbook Pro running OSx v10.8. I take my computer with me between home and school, and I usually just put it to sleep during the commute. For the last few weeks, when I got to school and woke up my MBP, it wouldn't connect to the internet. It recognized the WiFi connection, but did not assign a valid IP address. It was only when I shut the computer down and rebooted it that I was able to connect. Strangely, when I got home, I had no problem connecting to my home network, even after waking up from sleep.
After a little while of this, it got worse. Now, even after re-starting, I am unable to connect at school. (WiFi icon shows exclamation point). This is also true for my home network.
Here's the kicker. When I log out of my default account and log into the guest account, I have no trouble either in school or at home. Waking from sleep is never a problem and I connect everywhere. However, as soon as I log back into my other account, I lose connectivity.
I have tried renewing my DHCP lease, or manually inputting an address, but neither of these have worked. I have resorted to using the guest account, and I want access to my old files again without having to switch back and forth.
If anyone has any input on this, it would be greatly appreciated!! Feel free to e-mail me at [email protected]
Thanks!

same issue here..
reset my network settings and reset phone a billion times already, same issue still occur. sometimes the phone will wake up with wifi and sometimes it will go to 3g, one time it went to GPRS, its just really bizarre. If i open safari it will ask if i want to join the network that i originally set up, but when i select the network it just says "unable to connect". If i just leave the phone be for a couple hours and wake it up again, it will rejoin the wifi network.
I use remote to control my music library, but if my phone goes to sleep, it won't reconnect again so it's basically useless.
BIZARRRRRE, driving me crazy..

Touchpad problem after waking from Sleep

When I wake my Macbook Pro (Snow Leopard 10.6.1) from sleep the touchpad soft clicking doesn't work however The phsyical click does.
It rectifies itself after about 5 minutes of use however it is quite frustrating. Any possible solutions? This problem occured in with Leopard (10.5.x) as well.

I have exact same problem, in that in waking from sleep, cursor cannot be moved by touchpad for 1-2 minutes but moves instantly and normally via a mouse. Has been happening ever since got machine in March, regardless of OS / firmware upgrades. Any suggestions out there?

Problem with output from report to excel, calling the report from form 10g

Hi everyone, I'm having a problem generating a excel from a report, which is called from a form, I'm using Forms 10g. The problem is this: My report has a variable number of columns. These columns appear according to data obtained from the database, these columns are dates, In vesion 6 excel file generated shows the columns one after another starting in column A1 to column CP. I mean that the dates are correlative. But in version 10g the excel file generated shows the same report starting in column A to column T, only shows the 20 dates correlative corresponding to this columns, the rest of the dates are down the excel sheet in groups of 20 dates, it's something, the file in 6i grows across and in 10g grows down the excel sheet. The report (rdf file) is the same in 6i and 10g, I compiled the 6i version to obtain the 10g version. The excel sheet generated in 10g looks like the report was in pdf format, because PDF format, cuts the report in pages and the file grows down, if I generate the report in PDF format it has the same structure excel file in 10g has. I hope yo can help because I have days trying to solve this but I have no succes. If someone could help I could email the excel files generated in two versions. Here I put the code I use to generate the files in 6i and 10g. I have tried with DESFORMAT=SPREADSHEET in 10g but the result is the same. Thanks for your help. Greetings for all.
Code for version 6i (Works Very well)
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
     BEGIN
nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
          BEGIN
          nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
     BEGIN
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSE
          BEGIN
                    nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');
END;
Code for version 10g
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
--byt12122007.sn
repid REPORT_OBJECT;
     vURL VARCHAR2(500);
     rep_status VARCHAR2(20);
     vJobID VARCHAR2(100);
     v_rep VARCHAR2(100);
VAR NUMBER;
w_name_repserv VARCHAR2(30);
--byt1212007.en
BEGIN
     --w_name_repserv:=F_OBTIENE_SERVREP;
w_name_repserv:='repserv';
pl_id := Get_Parameter_List('mytmp_params');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('mytmp_params');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
     cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
/*Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );*/
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
BEGIN
     repid := find_report_object('tdvenrli1577');
--nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1577');
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
BEGIN
     repid := find_report_object('tdvenrli1578');
          --nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1578');
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
BEGIN
     repid := find_report_object('tdvenrli1576');
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          --nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1576');
          END;
ELSE
BEGIN
     repid := find_report_object('tdvenrli1545');
                    --nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1545');
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESNAME,nom_arch);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, 'File');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'DELIMITED');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, w_name_repserv);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_OTHER, 'paramform=no');
     v_rep := RUN_REPORT_OBJECT(repid, pl_id);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED')     LOOP
          rep_status:= report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' THEN
          vJobID := SUBSTR(v_rep, INSTR(v_rep, '_', -1)+1);
          vURL:='/reports/rwservlet/getjobid'||vJobID||'?'||'server='||w_name_repserv;
     END IF;
     WEB.SHOW_DOCUMENT(vURL, '_blank');
     IF NOT form_success THEN
          MESSAGE('Error: PL/SQL held against Button failed to execute');
          RAISE FORM_TRIGGER_FAILURE;
     END IF;
/*Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');*/
END;

There are two problems with your VI. First, the basic logic of writing/appending to a file (Excel, TDMS, anything) should go something like this: Open the file, position yourself at the end of the file, then, in the loop, acquire data and write it to the file until you are finished with data acquisition. When you exit the acquire/write to file loop, then close the file. In particular, the opening and the closing of the file should not be inside the loop.
As others have pointed out, writing to Excel might not be optimal, particularly if you are acquiring data at a high rate (and would therefore be writing a lot of data). We actually use Excel in our data acquisition routine, mainly reading from a WorkSheet to get the parameters of a particular stimulus, but also writing the outcome of the response to the stimulus. As it happens, our "acquisition rate" in this example is on the order of several samples per minute, so there's no problem using Excel (we also sample 16 channels of analog data at 1 KHz -- this gets written as a binary file).
Second, if you really do want to use Excel, use the (existing) Excel file to which you want to append as the "template" argument of the New Report function. Then use the Excel Get Last Row function to position yourself at "end of file", as noted above.
Good Luck.
Bob Schor

Problem with playback from mac to pc?

I recently Created a peroject on a mac containing a large quantity of markers and clips, when I transfered it to my home pc I recieved a notice saying that I needed a third party program for the video to play properly. When I did play the video, its frame-rate was terrible and couldn't keep up with the audio at all. Is this just a problem with the video transfered bit rate or with the actual changing of mac to pc? please help...
transfering has worked before between the two computers and the t3i I use works also with each computer, I wonder if any effects could create this?

I've never seen that message. What exactly did it say? You're using the native media from the T3i, it hasn't been converted, it's never been inside of Final Cut Pro?

Problems with waking from standby (suspend to disk)

Similar Messages

Maybe you are looking for