Problems with Win 7 64 bits printer configuration on RDS Web Access

hey All,
I have a scenario with RDS 2012 with Session host in 2008 R2 SP1, and on clients with windows XP SP3 and win 7 SP1 32 bits, printer configuration looks ok  but in windows 7 64 bits it looks like a truncated configuration , i have been tested every solution
that was reported before, like changing GPO, install Drivers in the clients and in the server, changed display resolution (to print in video) and nothing works, is any issue or incompatibility reported in this cases ?
Thanks in advance
Breno Andrade

Hi,
Thanks for posting in Windows Server Forum.
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many similar scenarios.
If the issue still persists, please feel free to  reply this post directly so we will be notified to follow it up. 
BTW,  we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. 
Thanks for your Support & understanding.
Regards.
Dharmesh Solanki

Similar Messages

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

    My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft.  Now I cannot print at all.  I get an error that says,  "windows cannot print due to a problem with the current printer set up".  I have tried reinstalling and a ton of other solutions to no avail.  Can someone PLEASE Help!

    Hello there, @jesseangelique ,
    Welcome to the Community!
    I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
    Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
    This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Also, let me know which Officejet 8500 Model you have:
     HP Officejet Pro 8500 All-in-One Printer - A909a
     HP Officejet Pro 8500 All-in-One Printer - A909b
     HP Officejet Pro 8500 Premier All-in-One Printer - A909n
     HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
    Hope to hear from you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problem with countinuous paper printing in dot matrix printer

    Hi All,
      I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If  i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
    I have developed one smartform for this and i have used A4 size page format.
    I have tried to change the Printer initialization code to 86 lines for DINA4.  Still no change in continuous printing.
         Printer initialization
         Reset after exit
         Cover page
         First Page
         Start of even page
         Start of odd page
         Start of page
         End of first page
         End of even page
         End of odd page
         End of page
         Start of line on an even page
         Start of line on an odd page
         Start of line
         End of line on an even page
         End of line on odd page
         End of line
    Printer initialization
    # reset
    \e\0x40
    # select character table 3 -> PC 437 character set
    \e\0x74\0x03
    # set line spacing 6 LPI
    \e\0x32
    # set page length 86 lines
    \e\0x43\0x46
    # cancel bottom margin
    \e\0x4F
    # set left margin to 0
    \e\0x6C\0x00
    # select LQ quality
    \e\0x78\0x01
    # select non-proportional spacing
    \e\0x70\0x00
    Can any one help me.
    Thanks,
    Vishnu

    Hi Vishnu,
    Above you have the following commands:
    set line spacing 6 LPI
    \e\0x32
    set page length 86 lines
    \e\0x43\0x46
    46 HEX = 70
    So the above settings mean 70 lines at 6 LPI = 11.66 inches.
    So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
    Regards,
    Aidan

  • Problem with Photoshop Elements Printing

    I have been using Photoshop Elements for a couple of years now and know it pretty well.  Today while attempting to print, a strange problem came up:  After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image.  How do I disable this function?

    Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have.  Am I looking in the wrong place?
    Date: Mon, 3 Sep 2012 11:14:57 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problem with Photoshop Elements Printing
        Re: Problem with Photoshop Elements Printing
        created by 99jon in Photoshop Elements - View the full discussion
      Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver. 
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Cannot print due to a problem with the current printer

    Cannot print (anymore) due to a problem with the current printer is the message I get every time I try to print something out. I tried to reinstall the printer's software, I changed the cables, but nothing happened. It seems to be something related to the printer setup utility. Any big idea on how to solve this? I was printing without problems until this afternoon. I have a HP Laserjet 1022 and sometimes I use Adobe Acrobat Writer. None is currently working.
    Thanks for any help.
    Power Book G4   Mac OS X (10.3.9)  

    I just had the opererational system (10.3.9) reinstalled . Back to normality again.

  • Problem with the MVMapView.print(printMapDiv,) function.

    Hello,
    I have a problem with the MVMapView.print(printMapDiv,) function.
    My FOIs are displayed correct on the screen but on the printed letter
    the stroke(border) color and the labels of a circle are not displayed.
    the fois have a custom style:
    var xmlDef = '<svg width="1in" height="1in">'+
    '<g class="marker" '+
    'style="width:40;height:40;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
    '<circle r="20"/>'+
    '</g>'+
    '</svg>';
    markerStyle = new MVXMLStyle("my_vector_icon_" + i + '_' + j, xmlDef)
    and are created like this:
    v_result = new MVFOI(p_geofeature.foiId, p_geofeature.foiGeomertyObject, markerStyle, null, 30, 30);
    v_result.setHTMLElement('1',0,0);
    Browser: I can see the map with a green circle, a red border and '1' as a label on
    top of the Circle.
    Printed Letter: I see the map with the green circle but no red border Color and no label.
    The implmentation of the printing function uses the same techique like the "Oracle Maps Tutorial"
    It is a javascript function called through a href link:
    function mapPrint()
    var a=document.getElementById("printmap");
    global_gdi.mapviewer.mapview.print(a);
    Version is Ver11_1_1_5_B110527
    Does anbody know how to print the map properly including the contents of the
    MVFOI class set trough setHTMLElement function?
    Greetings
    Andre

    Thanks for your reply but it is not working and i can prove that.
    I have a small example based on the mapviewer print tutorial. To run it you need a
    mapviewer installation and copy the text into a html file. In the browser you can see
    a green point with a red border and red label text on a map.
    If you use the print button everything except the label text will be printed.
    I think this is a mapviewer css-api bug.
    <html>
    <head>
    <META http-equiv="Content-Type" content="text/html; charset=UTF-8">
    <style type="text/css">
    @media screen
    .noscreen {display: none;}
    @media print
    .noprint{display: none;}
    </style>
    <script language=&quot;Javascript&quot; src=&quot;/mapviewer/fsmc/jslib/oraclemaps.js&quot;></script>
    <script language=javascript>
    var mapview;
    var baseURL = &quot;http://&quot;+document.location.host+&quot;/mapviewer&quot;;
    function showMap()
    mapview = new MVMapView(document.getElementById(&quot;map&quot;), baseURL);
    mapview.addMapTileLayer(new MVMapTileLayer(&quot;mvdemo.demo_map&quot;));
    mapview.setCenter(MVSdoGeometry.createPoint(-122.45, 37.6706,8307));
    mapview.setZoomLevel(4);
    mapview.display();
    //adds custom foi with label
    var xmlDef = '<svg width=&quot;1in&quot; height=&quot;1in&quot;>'+
    '<g class=&quot;marker&quot; '+
    'style=&quot;width:40;height:40;font-family:sans-serif;font-size:20pt;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5&quot;>'+
    '<circle r=&quot;20&quot;/>'+
    '</g>'+
    '</svg>';
    var markerStyle = new MVXMLStyle(&quot;my_vector_icon_&quot;, xmlDef);
    mpoint = MVSdoGeometry.createPoint(-122.30, 37.73,8307);
    var v_result = new MVFOI(&quot;11&quot;, mpoint, markerStyle, null, 60, 60);
    v_result.setHTMLElement('test label',0,0);
    mapview.addFOI(v_result);
    function mapPrint()
    var a=document.getElementById(&quot;printmap&quot;);
    mapview.print(a);
    </script>
    </head>
    <body onload=javascript:showMap()>
    &lt;div id=&quot;map&quot; style=&quot;position:absolute;top:50px; left:10px; width:600px; height:450px;border:0px&quot;>&lt;/div>
    &lt;div id=&quot;printmap&quot; class=&quot;noscreen&quot;>&lt;/div>
    &lt;p>Please click &lt;a href=&quot;javascript:mapPrint()&quot;>here&lt;/a> to print map&lt;/p>
    </body>
    </html>
    Edited by: user12005064 on 27.02.2012 02:37

  • "Problem with Your Audio/Video Configuration"

    "I Tunes Has Detected a Problem with Your Audio/Video Configuration. Audio/video playback may not operate properly."
    Does anyone know why I'm getting this error message? After getting it, I usually cannot hear any sound on I Tunes or other media players.
    I've already tried uninstalling and re-installing the drivers and it doesn't help. I also have the latest version of I Tunes. Any ideas?

    I had this problem also and uninstalled and then reinstalled Quick-time yesterday and the problem was solved.
    However when I turned on my PC today, I had the same problem again but this time uninstalling and reintsalling Quick-time is not working.
    Anyone any other suggestions as to how to fix this problem?
    Thanks.
    Dell Dimension 3100   Windows XP  

  • I'm having problem  with my icloud account,I don't have access to the email i once used to set up my icloud account,this is really affecting me,I can't backup and restore anything from my phone and device..anybody can help?

    I'm having problem  with my icloud account,I don't have access to the email i once used to set up my icloud account,this is really affecting me,I can't backup and restore anything from my phone and device..Can somebody help?

    Hi Maastricht2014,
    Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
    The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
    Hope that Helps!
    ~ Arpit

  • Problem with exporting and printing from pages to PDF

    I have a problem with my Pages
    My font will not be embeded in my pdf files.
    I have saved as a ps file and in to the destiller and my fonts are missing.
    I need to send my file to the print shop but they will not accept my file and i now understand why.
    fonts are missing...
    Is there a workaround.
    I have no problem in Indesign or quark but pages.....
    I need help
    thanks a zillion

    The font is coming from a notation software Sibelius 4 and is namned opus
    Hmmm ... Sibelius is a music notation software and notations are marked up in MusicXML. Presumably the font file is an SFNT with TrueType splines, but it is probably not installed in OS X system folders - rather in an internal Sibelius application font folder. So presumably you do not see the font in FontBook and OS X font auditing does not apply to the font.
    Sibelius exports EPS files, right? If memory serves, an EPS is still legal even if the font resource is not embedded. And in any case, we know from the behaviour that the font resource is not embedded for some reason. So how do you get Sibelius to put the font resource inside the graphic ... normally there is a button in the EPS export procedure that gives you the option to Embed All Fonts.
    You do not seem to get this button, though. Or why else would you not have checked it already and the problem would have gone away already.
    The next point in troubleshooting this is that you are not following the path that would let OS X detect that an external font resource is not embedded.
    I go from pages-print-printer- acrobat Pro 8-save as Pdf-x
    What you are doing here is telling Pages to tell OS X to generate a PostScript program within which is nested your Encapsulated PostScript program with the call to an unresolved external font resource.
    So why does Acrobat Pro not detect the unresolved external font resource? Hmm ... did you try the Preflight option in Acrobat 8 Pro? It should provide information on unresolved embeddings.
    I have also tried pages-print-printer- acrobat Pro 8 and save pdf as postscript and put the postscript file in destiller 8 pro with defalt setting high quality print
    The whole problem with EPS and PS is that this sort of situation is possible in the first place (plus, what is worse, the PS program can include custom additions to the graphics model that then fail in the PS interpreter whence Apple GX normalizing, Adobe Distiller normalizing, and Apple Quartz normalizing). You want to get as far away from EPS and PS as possible, believe me.
    So, you have not done what I posted that you should do in the first place. If I were you, I would first get rid of the problem that the EPS is making a call to an external font and then get rid of the problem that the PostScript is preserving the external call.
    To get rid of the problem that the EPS is preserving an external call, simply open the EPS in Apple Preview which includes a NORMALIZER for EPS/PS, and then save out the graphic as PDF. Alternatively, if you don't trust Quartz for some reason, set up a hotfolder for Distiller, make sure the option to embed all fonts is enabled, and convert the EPS to PDF.
    Now replace your EPS in Pages with PDF in Pages, and don't save PostScript to disk but save PDF to disk through the proper procedure which is File > Print > PDF > Save as PDF/X [for your custom configuration of the PDF/X-3 filter considering that no sane person in North Europe prints lowend US SWOP, we use ISO].
    If you begin by telling OS X that you want PDF within which fonts are supposed to be embedded ALWAYS, then you have started the right way. Otherwise, you have not told the operating system what you want to do, and this then leads you into places where you are unlikely to have the expertise to troubleshoot problems.
    So, forget placing EPS in the first place, place PDF. And forget saving PostScript to disk, save PDF to disk. If that does not sort your problem, here is the dirty solution for professional prepress.
    Adobe Photoshop has an EPS rasterizer that has wide tolerances for poor PostScript programming (so does Adobe Illustrator 6 and higher by the way).
    Therefore, if an EPS is posing problems, one workaround is to rasterize the EPS at high resolution in Photoshop and place that high resolution PDF in your layout.
    Take care that you rasterize as 1 bit at the required resolution of the print provider, probably 2450 dpi. When you save the 1 bit as PDF, Photoshop automatically compresses to a very, very small file (don't be surprised if 15Mb compresses to something like 0.5Mb).
    Rasterizing in Photoshop should not be necessary if you simply start by telling the operating system what it is you are trying to do. Then the operating system should be able to take the right decisions for you, and tell if you if finds problems it cannot resolve without turning to you.
    Good luck,
    Henrik
    would-be technical writer

  • Problem with wine and Tony Hawk Pro Skater

    Hi, I 've installed sucessfully Tony Hawk 4, but when i execute Start.exe:
    [antonio@laptop ~]$ wine .wine/drive_c/Archivos\ de\ programa/Aspyr/Tony\ Hawks\ Pro\ Skater\ 4/Start.exe
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
    my graphics card is Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller, and maybe should install a module for it works with wine.
    The window where you start all options configuration appears to me, but when I go to Play THPS4! showed me the error. The version of my wine is wine-1.1.8. I don't know if I have to install any shape or form over any other option in winecfg.
    thanks
    Last edited by trancos83 (2008-11-10 20:19:44)

    Can you try it on a desktop comp using arch and wine instead?  Maybe it's a graphics problem?  Anyway, I've checked the min req. and it's quite low..
    Please check this site if your game is supported or if ever you want to play another game in the future.
    http://appdb.winehq.org/

  • Problem with NIReport.llb\Print HTML Report using IE.vi on different machines

    We have 5 machines here in our workgroup which have the same state regarding security patches and other system updates. We recently found out that there is a problem with the NIReport.llb\Print HTML Report using IE.vi on the different machines.
    If I would open the VI on MachineA the control could be loaded. If I would open the VI on MachineB the control could be loaded. If I would copy the VI from MachineB to MachineA and open the VI the control could not be loaded. If I would copy the VI from MachineA to MachineB and open the VI on MachineB the control could be loaded. MachineB could load the version from MachineA and MachineB but on MachineA only the own version will load. I have seen that both versions have the same GUID for the Microsoft Webbrowser but are different in some other aereas.
    Since printing HTML Reports is part of the application which will be distributed as application I want to know if someone else have seen such a behaviour or has got problems distributing an application.
    Also I want to know which additional information is stored in an Active-X container about the control beside the GUID.
    We have Win XP Prof SP2 with MS IE 6.0.2900.2180 on all machines in the workgroup.
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

    Hi Tom,
    this is the VI <vi.lib>\Utillitiy\NIReport.llb\Print HTML Report using IE.vi copied from a machine that can load and run the VI and it will print. On this machine the control in the VI is white.
    This VI will give the "Control could not be loaded" message on my machine.
    The file shdocvw.dll is 2006-10-23 16:18 size 1.460 KB and I verifyed that both machines have the same version of this file.
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions
    Attachments:
    Print HTML Report using IE.png ‏11 KB

  • Problem with Win 7 x64, WWAN or WiFi card and Windows XP Mode

    I have a T500 with switchable graphics (2056-4RU) with a clean install of Windows 7 Pro x64 with the AT&T WWAN card.
    With all the Win7 RTM drivers and Access Connections for Win7, I had a problem that the WWAN card (Ericson F3507g, purchased from Lenovo and working flawlessly under Vista 32-bit) would not initialize. Support told me to uninstall the Win 7 versions of the Power Manager Drivers, WWAN card driver and Access Connections and replace them with the Vista counterparts, which restored the functionality of my WWAN card. Based on the speed with which the support tech came up with the suggested fix, I suspect I am not the only one with the disappearing WWAN card problem.
    Now I have found that starting the Windows XP Mode virtual machine kills the WiFi functionality (Intel WiFi Link 5100 AGN) until I disable and re-enable the WiFi adapter in Device Manager and then restart the system. (I have not problems with XP Mode and with the Win7 drivers / Access Connections opening Windows XP Mode did not cause the problem with the WiFi.) Opening Windows XP Mode causes no problem with the wired network adapter on my system). 
    Thus it appears that I can have functionality of the WWAN and WiFi adapters with XP Mode using the Released Win 7 versions and functionality of Windows XP Mode together OR I can have WWAN but not WiFi functionality with XP Mode using the Vista drivers that support suggested. However, it seems that I cannot have WWAN, WiFi and XP Mode concurrently.
    I reproduced the above XP mode / WWAN problem / WiFi problems on a T500 with Win7 x64 owned by another family member.
    Does anyone (particularly anyone from Lenovo) have fix for this?
    Thanks.

    for the sim card, try this:
    http://jack.ukleja.com/update-ericsson-f3507g-mobile-broadband-on-windows-7-with-lenovo-thinkpad/com...
    I have another operator and I finally gave up. apparently it's also no that easy to install the SIM card, if the plastic thing that helps to remove the SIM card  is not the right position, it will overlap the SIM Card chip.
    can't help for the WIFI. I had the problems too with access connection and decided to remove it. I use Seven's network manager, which does an equally good job.
    Since I have the switch to turn off the wireless, I don't really need access connection anyway.
    Finally, something that I learns while struggling with the bluetooth driver: the order in which power manager, access connection and the different drivers are installed DOES affect their effectiveness. I forgot the details but I remember 2 things:
    always read the TXT file that is available on the driver page on the lenovo web site and install power manager and access connection last.
    Good luck

  • Problem with colors when print to pdf in FM9

    Hi,
    we have some problems with printing colors to pdf with FM9.
    The FM document contains (1) eps file with a green box and (2) a rectangle created with FM graphic tools, filled with the same green color values (91/0/60/44)
    In FrameMaker the two colors really looks different, but so what, in the PDF both colors (eps) and rectangle got the same correct green color.
    Ok, the were different in creation, so they were CMYK and RGB, but your print shop could manage that.
    Now in FM 9:
    (1) If I do a "save as PDF"  and switch OFF "convert CMYK to RGB" the resulting PDF is the same as from FM8 (correct)
    (2) If I print to PDF via distiller and define the job options to "convert all colors to CMYK" the resulting rectangle green is very  different from the eps green.
    I tried different job options, the best result was "convert all colors to CMYK", other options just very more ugly.
    Does someone of you know a solution for your problem? Help is very appreciated. I could send example files if necessary.
    Thanks in advance.
    PK

    PK-ulm wrote:
    But we want to use the print option, using the distiller.
    Pia,
    this last sentence needs some explanation, I think. Why do you want to use the print option?
    Using the print option, you still go the same route as FrameMaker Win always did, which is using the RGB-only Windows postscript driver. Now, with FM9, you have the option to get CMYK colors directly to PDF, as defined, without any color conversion. And it *does* work, as long as you restrict your documents to either CMYK colors or spot colors coming from the FM libraries.
    So, again: why do you want to use the print option?
    On a sidenote: I'm not sure if I interpret your username correctly, but if you are able to understand German, you'll find some in-depth color tests made with FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs____getestet_P387800.html
    Bernd

  • Serious Problems with 64-bit OS'es

    Ok, first off...
    I recently got a custom build system, this MB, 3400+ FX proc. 2 1GB sticks of Kingston HyperX memory, 2 Maxtor 250GB SATA drives, 2 Maxtor 200GB IDE Drives, 2 Pioneer DVR-A06 DVD-RWs, nVidia GeForce 5950 Ultra... All wrapped up in a Koolance Liquid Cooled case...
    When running any 32-bit operating system, everything runs just fine.
    When running Windows XP 64, everything runs mostly fine.
    When running any 64-bit Linux Distribution, everything goes up in smoke...
    (Not literally)
    When I try to install any Linux Distribution which has been compiled for 64-bit AMD processors, I get a blue screen, and several substantial errors (too many to write here)
    All of it seems tied in with a "RIP Error!"
    I am not entirely sure what this problem is, and I would like to check here before I go complaining to 4 different distributions that the screwed up in their compilation. Has anyone else seen this problem? If so, did you manage to fix it or have any idea what is causing it?
    I find it a little unusual that any 32-bit Linux distribution runs flawlesly on this system... It is just the 64-bit versions. (And yes, I have validated the checksums in order to ensure that the Discs are not corrupt.)
    Thank you for your assistance,
    Tyson Edwards

    I am not sure exactly what your problem with Linux -AMD64 OS is. What Linux is it ? To give you a perspective and as a test bed I have a 15GB hd partitioned (with Partition Magic) like this:
       1: FS: FAT 32,Partition C: (HDA1) Windows 98 (1st edition) Total MBs=2110.1
       2. (Extended) (no Partition)                                              Total MBs=12715.5
       3. FS: FAT 32,Partition D: (HDA5) Trial Windows XP AMD64 Total MBs=5412.5
       4. FS:Reiserfs, HDA6 Linux SuSE v9.0 for AMD64               Total MBs=6628.4
       5. FS: Linux Swap, HDA7 Linux Swap                                 Total MBs=509.9
    I like Partition Magic because the LEAST/MINORest HD error it will quit !
    But if you dont have it you can still use the archaic Partitioner MS and Linux FDISK.
    I preformat the HD in advance and write it down so I dont forget.
    Unless you are new to Linux you should know that Linux can read and access FAT 32 Windows Partitions but not vice-versa. Item 2 (above) is automatically setup when you partition any HD with Windows. I am not sure which HDA it is, I dont remember. HDx where x =IDE channel."A" is primary master "B" is slave. My DVD ROM is on secondary master so it is listed as HDC. The number after HDA is logically  recognized by Linux. HDA1 is the first Partition on the HD and it is also known to Windows as Partition C: I dont know what happened to HDA3 or HDA4 because they are not listed in Linux's FDISK but I assume they are accounted for.
    As usual you always start with a clean virgin HD first then install the lowest/oldest Windows next. The last OS you install is Linux. If for some odd reason you cant boot with Linux after install then you have no other resort than to do the Rescue Floopy routine. Always create one BEFORE you exit install. If Linux "GRUB" or "LILO" fails then run in DOS MS fdisk /mbr. This will restore the original Windows boot. To reboot Linux use the floopy you just created.
    All OSs above work ok except the trial version of Windows XP for AMD 64. The problems I have is not installation but with Drivers for sound, RAID and my specific printer. They are not available yet for this platform.

Maybe you are looking for

  • Smartforms and its internal table

    Hi All! From the main program, I call the FM SSF_FUNCTION_MODULE_NAME and later "call lf_fm_name" as below shown. The generated FM name gets an "internal table" in the tables parameter. And now how can I to treat now this internal table within smart

  • To transfer Selection Screen field value from a program to another Program

    Hello, Program Z_ABC having Select Option Field XYZ. I need to transfer all the values entered on Selection Option Field XYZ  to another Program Dialog Z_DIALOG.

  • Wireless Clients CWA username

    We have clients associating to a WLAN using CWA with ISE on a 5508 wlc on 7.4.121. I have noticed that under the monitor clients menu, I see clients that are authenticated, but the username field for the client is not displaying for some of these cli

  • Re: Archiving Objects

    Guys, I need to findout corresponding Archiving objects (COPA, FI-GL, PCA...etc) that are present in the system for a particular document type, so that I can archive all the related stuff. Can some one help me how to do this step by step. Thanks, Kum

  • Remove IOS from LMS repository

    Dear *, How to remove IOS from LMS RME repository? Thanks, Aamir