Problems with Windows 2003, JRun and Java 1.4.2_07

Hi!
I have installed JRun 4 with J2SE 1.4.2_07 on a Windows 2003 Server and all goes well until someone install a system patch, Office. After that JRun doesn�t star. The logs says:
Starting Macromedia JRun 4 (Build 84683), admin server
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x77F46A07
Function=RtlFreeHeap+0x322
Library=C:\WINDOWS\system32\ntdll.dll
Current Java thread:
     at java.util.zip.ZipFile.getEntry(Native Method)
     at java.util.zip.ZipFile.getEntry(ZipFile.java:146)
     - locked <0x10a83218> (a java.util.jar.JarFile)
     at java.util.jar.JarFile.getEntry(JarFile.java:194)
     at java.util.jar.JarFile.getJarEntry(JarFile.java:181)
     at sun.misc.URLClassPath$JarLoader.getResource(URLClassPath.java:671)
     at sun.misc.URLClassPath.getResource(URLClassPath.java:160)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:191)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
     - locked <0x10a63608> (a sun.misc.Launcher$AppClassLoader)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
     - locked <0x10a63608> (a sun.misc.Launcher$AppClassLoader)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
     - locked <0x10a63608> (a sun.misc.Launcher$AppClassLoader)
     at java.lang.Class.getDeclaredConstructors0(Native Method)
     at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
     at java.lang.Class.getConstructor0(Class.java:1930)
     at java.lang.Class.getConstructor(Class.java:1027)
     at com.sun.management.jmx.MetaData.findConstructor(MetaData.java:256)
     at com.sun.management.jmx.MBeanServerImpl.internal_instantiate(MBeanServerImpl.java:2111)
     at com.sun.management.jmx.MBeanServerImpl.instantiate(MBeanServerImpl.java:152)
     at jrunx.kernel.ConfigurableServicePartition.loadAndInit(ConfigurableServicePartition.java:127)
     at jrunx.kernel.ConfigurableServicePartition.loadChildren(ConfigurableServicePartition.java:89)
     at jrunx.kernel.ConfigurableServicePartition.setChildElements(ConfigurableServicePartition.java:60)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1628)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at jrunx.kernel.ServiceAdapter.invokeMethod(ServiceAdapter.java:705)
     at jrunx.kernel.JRunServiceDeployer.loadMBeans(JRunServiceDeployer.java:179)
     at jrunx.kernel.JRunServiceDeployer.deployServices(JRunServiceDeployer.java:85)
     at jrunx.kernel.DeploymentService.loadServices(DeploymentService.java:46)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1628)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at jrunx.kernel.JRun.startServer(JRun.java:575)
     at jrunx.kernel.JRun.<init>(JRun.java:493)
     at jrunx.kernel.JRun$1.run(JRun.java:346)
     at java.security.AccessController.doPrivileged(Native Method)
     at jrunx.kernel.JRun.start(JRun.java:343)
     at jrunx.kernel.JRun.startByNTService(JRun.java:427)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at jrunx.kernel.JRun.invoke(JRun.java:180)
     at jrunx.kernel.JRun.main(JRun.java:168)
Dynamic libraries:
0x00400000 - 0x00410000      C:\JRun4\bin\jrun.exe
0x77F40000 - 0x77FFA000      C:\WINDOWS\system32\ntdll.dll
0x77E40000 - 0x77F34000      C:\WINDOWS\system32\kernel32.dll
0x77DA0000 - 0x77E30000      C:\WINDOWS\system32\ADVAPI32.dll
0x77C50000 - 0x77CF5000      C:\WINDOWS\system32\RPCRT4.dll
0x77BA0000 - 0x77BF4000      C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000      C:\Java\j2sdk1.4.2_07\jre\bin\client\jvm.dll
0x77D00000 - 0x77D8F000      C:\WINDOWS\system32\USER32.dll
0x77C00000 - 0x77C44000      C:\WINDOWS\system32\GDI32.dll
0x76AA0000 - 0x76ACC000      C:\WINDOWS\system32\WINMM.dll
0x10000000 - 0x10007000      C:\Java\j2sdk1.4.2_07\jre\bin\hpi.dll
0x76F50000 - 0x76F63000      C:\WINDOWS\system32\Secur32.dll
0x003F0000 - 0x003FE000      C:\Java\j2sdk1.4.2_07\jre\bin\verify.dll
0x005F0000 - 0x00609000      C:\Java\j2sdk1.4.2_07\jre\bin\java.dll
0x00610000 - 0x0061D000      C:\Java\j2sdk1.4.2_07\jre\bin\zip.dll
0x006E0000 - 0x006EF000      C:\Java\j2sdk1.4.2_07\jre\bin\net.dll
0x71C00000 - 0x71C18000      C:\WINDOWS\system32\WS2_32.dll
0x71BF0000 - 0x71BF8000      C:\WINDOWS\system32\WS2HELP.dll
0x71B20000 - 0x71B63000      C:\WINDOWS\System32\mswsock.dll
0x76ED0000 - 0x76EF7000      C:\WINDOWS\system32\DNSAPI.dll
0x76F70000 - 0x76F77000      C:\WINDOWS\System32\winrnr.dll
0x76F10000 - 0x76F3F000      C:\WINDOWS\system32\WLDAP32.dll
0x76F80000 - 0x76F85000      C:\WINDOWS\system32\rasadhlp.dll
0x03230000 - 0x0323C000      C:\JRun4\bin\portscan.dll
0x71AE0000 - 0x71AE8000      C:\WINDOWS\System32\wshtcpip.dll
0x76C10000 - 0x76C38000      C:\WINDOWS\system32\imagehlp.dll
0x6D580000 - 0x6D621000      C:\WINDOWS\system32\dbghelp.dll
0x77B90000 - 0x77B98000      C:\WINDOWS\system32\VERSION.dll
0x76B70000 - 0x76B7B000      C:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 2304K, used 1312K [0x10010000, 0x10280000, 0x109e0000)
eden space 2112K, 56% used [0x10010000, 0x1013a8d0, 0x10220000)
from space 192K, 61% used [0x10250000, 0x1026d958, 0x10280000)
to space 192K, 0% used [0x10220000, 0x10220000, 0x10250000)
tenured generation total 30272K, used 1139K [0x109e0000, 0x12770000, 0x18010000)
the space 30272K, 3% used [0x109e0000, 0x10afce80, 0x10afd000, 0x12770000)
compacting perm gen total 4864K, used 4680K [0x18010000, 0x184d0000, 0x1c010000)
the space 4864K, 96% used [0x18010000, 0x184a2348, 0x184a2400, 0x184d0000)
Local Time = Wed Feb 09 10:43:31 2005
Elapsed Time = 3
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_07-b05 mixed mode)
# An error report file has been saved as hs_err_pid1712.log.
# Please refer to the file for further information.
Can someone help me. Thanx and sorry about my english.
Manu

It crashed 3 seconds after it is running. Should be reading some jar file.
Could be a something corrupted a zip file or something. Can you still do a java -version? You may want to try reinstalling 1.4.2_07

Similar Messages

Big problems with Windows 2003 Server and FX5900

Getting repeated lockups using MSI FX5900XT and Windows 2003 Standard Server. Mouse stops responding and system occassionally locks up completely. I have a dual boot system and windows XP works fine. Windows 2003 works fine if I use the standard VGA driver (I use 1600x1200 16bit 75 Hz resolution and refresh).
The event log usually says:
Event Log
Event Type:   Error
Event Source:   nv
Event Category:   None
Event ID:   108
Date:      18/07/2004
Time:      13:28:25
User:      N/A
Computer:   HOME
Description:
The driver nv4_disp for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a
problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your
hardware device vendor for any driver updates.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Presently using the latest drivers
Any ideas
Thanks
Will

IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   Creative SB Audigy   OK
IRQ 16   NEC PCI to USB Open Host Controller   OK
IRQ 17   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 17   NEC PCI to USB Open Host Controller   OK
IRQ 18   NEC PCI to USB Enhanced Host Controller (B1)   OK
IRQ 19   MSI MS-StarForce GeForce FX 5900XT (NVIDIA GeForce FX 5900XT)   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA nForce MCP Networking Controller   OK
IRQ 21   Standard OpenHCD USB Host Controller   OK
IRQ 22   Standard Enhanced PCI to USB Host Controller   OK
IRQ 22   OHCI Compliant IEEE 1394 Host Controller   OK

Major problems with adobe flash player and java.....HELP!

So i have bought 3 laptop computers during this past week due to the same issue im having now. When i try to play my gaming websites such as pogo...simslots and my fav games on facebook.....i get a oppps we are sorry but it looks like you do not have adobe flash player/java up to date....to update click here and when i do it, it does nothing...it says that since windows 8 is integrated with java and flash player i do not need to down load these.....but yet with out those i can not play my games....have called to the geek squad and they seem to not know what the problem is either, they only said that it sounds like a problem with windows 8 itself......can someone please help me?????

See http://helpx.adobe.com/flash-player/kb/flash-player-issues-windows-8.html - most likely you didn't enable the add-on.

IE11 Problem with Windows 8.1 and IIS 8.5

I have upgraded my computer from Windows 8 to Windows 8.1, 64bit and IIS 8.5 is installed on the upgraded machine. I am unable to view with IE11 the default page of the default website hosted on the local machine. The problem occurs with both
the desktop version of IE11 and the Windows 8 metro style version.
When Chrome is installed on the machine the page is visible but when using IE11 a "This page can't be displayed" message appears. The IIS Log Files reveal that it is receiving nothing from IE11. Other machines I have that have also been upgraded
to Windows 8.1 exhibit the same fault.
The strange thing is that when viewing pages on other networked machines exhibiting the same problem, you can see the pages on the remote machines but in all instances the local page cannot be viewed.
It appears that there is a problem with IE11. Uninstalling and reinstalling IE11 does not fix the problem.
Can anyone help me? Assitance with this problem would be most appreciated.

Description
<dir>
</dir><dir></dir><dir></dir><dir>
Faulting Application Path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
</dir>
Problem signature
<dir>
</dir><dir></dir><dir></dir><dir>
Problem Event Name: APPCRASH
Application Name: IEXPLORE.EXE
Application Version: 11.0.9600.16384
Application Timestamp: 52157231
Fault Module Name: MSHTML.dll
Fault Module Version: 11.0.9600.16432
Fault Module Timestamp: 52620354
Exception Code: c0000005
Exception Offset: 002964a7
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 2057
Additional Information 1: ab90
Additional Information 2: ab9026eb5cad8b25f882a373e2d752b2
Additional Information 3: d486
Additional Information 4: d48664e52db6f0b0676e13c96e422192
</dir>
Extra information about the problem
<dir>
</dir><dir></dir><dir></dir><dir>
Bucket ID: 45b7b98d077be82c89ec9142c2213a5f (-374769956)
</dir>

Problem with Windows 8.1 and Corseca Byte BT headset

I recently bought a Corseca Byte bluetooth headset.
The headset works fine with phones.
Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
and restart it works fine unless it lays unused for some time.
Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
How to solve the issue?

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

MAC (10.6.8) users having permission issues with windows 2003 AD and NetApp SAN environment.

I have created a cifs share that is being accessed by Mac users that are part of a windows 2003 AD. When the user edit data and save it back to the share, the security permission are reset and none of the other users can see the new data unless the permissions are refreshed on the windows server. I have found following links that talk about a similar issue but with an older MAC OS. I am using 10.6.8.
https://discussions.apple.com/thread/1776934?start=0&tstart=0 (Max OS X doesinfluence ACL's on CIFS on 10.5)
http://www.macwindows.com/snowleopard-filesharing.html#033010b(Max OS X 10.6.3 fixes saving issues on CIFS)
Any help will be appreciated.
Thanks,
Manu

This is a 'known problem' as discussed on the MacWindows site, see http://www.macwindows.com/More-on-OS-X-conflicts-with-Windows-Server-Deduplicati on.html
It appears to still affect Mavericks 10.9.5 at least from the lack of any positive reports to the contrary. It is perhaps a bit late but it would have been worth signing up for the public beta of Yosemite and testing that and if needed reporting it as an issue for Yosemite as this will be getting more bug fix attention than Mavericks now.
I would agree turning off de-duplication is not a desirable solution, however other possibilities to consider are installing the standard Samba software on a Mac and using that instead of Apple's SMBx software. This is done by using the SMBup installer See http://eduo.info/2013/07/13/smbup-faq it does not officially list Mavericks but I did see at least one report that it still worked. A second possibility is to install ExtremeZ-IP which installs an AFP server on to your Windows Server and also gives the bonus of supporting Spotlight searches.
Note: You should only try SMBup on a test setup first.

Problem with Windows 8.1 and Organizer in Photoshop 12

I use Windows 8.1, and in the last couple of days, when I try to add music to my slide shows I get the message that" Elements 12 Organizer has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I uninstalled Java which I have recently installed but no luck so far. The Organizer was working well a month ago which is the last time I added music to slide shows so it is too far back to use the 'System Restore" I think.
Am I alone in this? Any suggestions please
Suz

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

Permission problems with command line CVS and Java CVS App

Greetings,
I'm part of a moderately sized website development team which recently upgraded to MacBook Pros (dual core) running OS 10.4.9. One of the primary tools we use in our day to day work is the open source concurrent versioning system (CVS). We've noticed a distressing issue running CVS on our macbook pros: there seems to be a problem with the way these new machines handle permissions on the directories/files that CVS uses to manage files.
The error occurs when the CVS application, in this case both command line CVS and GUI CVS application named SmartCVS, tries to rename a temporary file named Entries~ to its new name Entries (no ~). It looks like this:
java.io.IOException: Could not rename file
/Users/[USER]/Sites/[MODULE]/lib/CVS/Entries~ to
/Users/[USER]/Sites/[MODULE]/lib/CVS/Entries
at smartcvs.JP.a(SourceFile:125)
at smartcvs.JP.a(SourceFile:113)
We've noticed that if we open up a get info window on the directory we're downloading, and choose "Apply to enclosed items" right when we start the download process, the issue will be resolved, presumably because the permissions are being set on the subdirectories as the download is taking place.
We've checked the permissions on the overall ~/Sites/ directory numerous times, and they always seem to be set correctly as drwxr-xr-x. It's within this folder that CVS creates a directory with the CVS module name and downloads all the contained files, so we don't see why it would be having issues completing this successfully. We also checked to ensure the GUI CVS application is running under the current user on the machine: it does.
Has anyone run into issues like this in the past? Is there more information I could provide to further clarify the problem we're having?
Thanks for any input you have!

Thanks for asking Jeff, yes one place we are seeing this error is Java application SmartCVS, though the results posted here are from a normal command line CVS checkout.
===
Checkout command:
cvs co [MODULE]
===
Error:
cvs [checkout aborted]: cannot rename file CVS/Entries.Backup to CVS/Entries: No such file or directory
===
ID:
uid=502([USER]) gid=502([USER]) groups=502([USER]), 81(appserveradm), 79(appserverusr), 80(admin)
===
LS -ALN
Computer:~/Sites [USER]$ ls -aln
drwxr-xr-x 28 502 502 952 Jun 4 13:11 Sites
Computer:~/Sites/[MODULE] [USER]$ ls -aln
drwxr-xr-x 38 502 502 1292 Jun 4 13:33 www_root
Computer:~/Sites/[MODULE]/www_root [USER]$ ls -aln
drwxr-xr-x 32 502 502 1088 Jun 4 13:33 [SUBDIR1]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1] [USER]$ ls -aln
drwxr-xr-x 5 502 502 170 Jun 4 13:33 [SUBDIR2]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2] [USER]$ ls -aln
drwxr-xr-x 4 502 502 136 Jun 4 13:33 [SUBDIR3]
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3] [USER]$ ls -aln
drwxr-xr-x 6 502 502 204 Jun 4 13:33 CVS
Computer:~/Sites/[MODULE]/www_root/[SUBDIR1]/[SUBDIR2]/[SUBDIR3]/CVS [USER]$ ls -aln
total 32
drwxr-xr-x 6 502 502 204 Jun 4 13:33 .
drwxr-xr-x 4 502 502 136 Jun 4 13:33 ..
-rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries
-rw-r--r-- 1 502 502 45 Jun 4 13:33 Entries.Log
-rw-r--r-- 1 502 502 48 Jun 4 13:33 Repository
-rw-r--r-- 1 502 502 63 Jun 4 13:33 Root
MacBook Pro / MacPro Mac OS X (10.4.9)

Are you having problems with Windows XP Pro and Airport Utility Updates?

I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

Well... it worked! :D
I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
DryHeat, yeah it was with SP2 but I got it installed now so no worries
Thanks a lot!

Scanner driver Problem with - Windows 8.1 and HP AIO L7680

Hi folk,
i have a problem with my HP AIO L7680.
I have made an upgrade to Windows 8.1 x64
I install the actual driver version 14.8.0.
The printer runs but the scanner makes trouble.
When i will start a scan process i will get an error message and the scan process will be canceled.
I will get this error message with photoshop, HP Solution Center and any other scanner software.
The HP Print and Scan Doctor says i should contact the support.
Here i am any idea?
By the way i disabled my Antivirus Software during the installation.
Thanks a lot.
greetings
Markus
This question was solved.
View Solution.

Hi Markus,
I understand that you are having an issue with scanning after upgrading to Windows 8.1. I will try my best to help you resolve this issue. I just need a little more information. What operating system are you running on your computer? Are you connecting wireless or with a USB cable? What is the error message that you are getting?
I am including this document for A 'No Scan Options' or 'Scan settings are not set' Message Displays on the All-in-One there are trouble shooting steps for Windows 8 that will work for Windows 8.1.
I hope this helps, let me know.
Thank you,
I worked on behalf of HP.

Problem with Windows 8.1 and iTunes

Hi Apple Support
I use windows 8.1. on my laptop and I have a problem with iTunes after the latest version. When I connect my iPhone, iTunes doesn´t work ( I cannot see my iPhone on iTunes) and when I connect my iPod nano the latest version, it is writing unknown device.
Would you be so kind and give me some advice how the problem solve?
Your sincerely
Filip Chovanec

Hello FChovanec,
You can find more information here: http://support.apple.com/kb/ts1538 (iOS: Device not recognized in iTunes for Windows)
Cedric

Permission Problem with Windows 2003 Share

Hi There,
I have just installed a new 750GB removable drive on our Windows 2003 R2 file server so our "mac" team can copy old data to it. The drive is formated in NTFS and previously used to do exactly the same to a 250gb drive without any issues.
Now when we go to copy a file to the "new" drive we get the "Operation cannot be performed because you do not have sufficient privileges for some of these items" error. I have searched hi and low for a solution but I cannot find anything that rectifies the problem.
We have MAC's that run both OSX 10.5 and 10.4 but we get the same problem on both.
Anyone been able to solve this before?
Thanks in advance.
Nick

Are you sure you applied the proper policy(ies) to the share on Win server?
Also if youre sharing it out over AFP as opposed to SMB there is a special property that makes it read only. If you right click on the SFM volume and go to properties youll see a check box near the bottom of the pane that makes the share read-only by default.

Problem with windows shrinking vertically and becoming stuck in upper-left corner of screen.

Does anyone else have problems with open windows shrinking vertically and becoming "pinned" to the top-left corner of the screen in OSX 10.9? They snap back to the upper-left if I try to move them. I have to Quit or Force Quit the apps and restart them.
I have a Mac Mini, and I have it hooked up to a TV via HDMI. This only seems to happen when I switch the TV input source *from* the Mac Mini to, for example, DirecTV. When I switch the TV's input source *back* to the Mac Mini HDMI connection, all seems fine; except that some or all of the windows that were on the desktop have shrunken vertically, and they are "stuck" in the upper-left corner of the screen. When I try to move the windows out of the upper-left corner, they snap right back. Very weird.
Everything else about the desktop and the Mac Mini appears just as I left it. The screen resolution hasn't changed - nothing like that. Although my first thought is perhaps the screen resolution is, briefly, changed to a lower resolution when the Mac Mini detects that its "monitor" connected via HDMI (in this case my TV) doesn't appear to be there because I have switched the input source of the TV. That's just a guess. And even if that's correct, I don't know how to fix it.
Any help would be greatly appreciated.
BTW, I don't remember this happening before I upgraded to OSX 10.9 Mavericks. I'm not 100%, but it seems like something I would have remembered. So the culprit could be 10.9, or it could be something else I have installed recently.
Thank you to anyone that can answer this for me.

same here:
Overview: I've seen it occur with the symptoms described by the OP while running Xcode, almost exclusively after waking my laptop from sleep mode. It effects non-Apple apps as well, but sometimes differently-- the window(s) open in Eclipse Juno for instance will sometimes disappear entirely such that they are totally inaccessible. As the OP noted the only way to clear the problem is to force quit the app and restart it (quite a hassle if you have multiple project windows open at once). I run Juno on Win32 and debian Linux also and have never seen behavior like this, so given that the problem has been observed in Apple branded apps and the fact that it only started after I installed Mavericks I would also posit that it is a Mavericks bug. That said, I do run a third-party app called WindowMagnet (v. 1.6 by CrowdCafe) that affects the window system, allowing Windows 7 Aero style window snapping; does anyone else having this problem use WindowMagnet?
Steps to reproduce: open Xcode, put the machine to sleep, wake the machine -- this bug will appear intermittently
Expected results: windows should remain the same size/configuration they held prior to sleep
Actual results: intermittently windows will be 'stuck' in the upper-left corner of the display or entirely invisible
System info: mid 2012 macbook pro (OSX 10.9.1)

Thread Problems with Solaris 2.7 and Java 1.3

Hi,
we are deploying a Java distributed application, based on JAVA 1.3, on a SOLARIS 2.7 system and we are meeting some problems with threads.
This application uses a distribuite computing based on ORBIX 2000 environment and creates more than 40 threads.
Sometimes happens that one or more threads ( consider that all the threads have the same priority) are no more scheduled even tought they have some work to do into the local queue.
We have tested the application on a NT system and the problem does not appears.
Do you have some suggestion ?
PS: Note that all the other threads work well and it seems that the problem is not related to a Orbix method.
Thanks
Roberto

It crashed 3 seconds after it is running. Should be reading some jar file.
Could be a something corrupted a zip file or something. Can you still do a java -version? You may want to try reinstalling 1.4.2_07

Problem with new-line-character and java.io.LineNumberReader under AIX

Hi folks,
I got the following problem: I wrote a little parser that reads in a plain-text, tabulator-separated, line-formatted logfile (and later on safes the data to a 2-dimensional Vector). This logfile was originally generated by an AIX ksh script, however, I copied it on my Windows machine to work with it (for I'm using a Java editor that runs under Win Systems).
For any reason, Windows, and what is worse Java too, seems not to recognize correctly the new-line character (in the API it is written that this should be a newline '\n' or a carriage-return '\r' or one followed by the other) that marks the end of a line in the logfile.
Also, when I'm opening the logfile with the "Notepad"-editor, this special character does not seem to be recognized, every line is inserted right after the other.
On the other side, when I open the logfile with the built-in editor in the CMD-Shell ("Dos-shell"), the newline chars seem to be recognized correctly.
But when start my parser on the AIX-machine the newline does not seem to be recognized correctly again.
I tried to read in the logfile with MS-Excel and safe it as a plain-text, tabulator-separated, line-formatted logfile again, with such files my parser works fine both on the AIX as it does on Windows.
Any ideas? Anybody got over the same problem already?
Greetz FK

Under windows, text files' lines are usually delimited by \r\n,
under Unix/Linux/AIX etc. \n
and under Mac \r.
I recommend to use the following editors, which are capable to handle files with Unix and Windows-styled line-delimiters or convert between these types:
Programmer's File Editor (PFE; available on Windows)
The Nirvana Editor (http://www.nedit.org/; available on Unix, MAcOS, Windows)
(BTW good old vim can handle that too. Transferring text files to windows in order to edit them, even using Excel for this purpose means your being a UNIX newbie, (I mean no offense by writing this) so vim is probably beyond your reach for the moment.)
Java normally assumes the platform's line delimiters where it is running, so if you transferred the file from Unix to Windows might be distrurbing.

Problems with Windows 2003, JRun and Java 1.4.2_07

Similar Messages

Maybe you are looking for