Problems with WLS 7.0 and NES plug-in
Hi,
I am not able to configure NES with weblogic 7.0. I created a domain
with an admin server and 3 clustered servers. When I tried to configure
NES it is giving me these errors.
[06/May/2002:18:41:26] failure ( 1530): Invalid configuration: File
/data/iasuser2/webserver/https-ias02.mygazoo.com/config/server.x
ml, line 32, column 15: Error processing obj.conf line 1: init functions
are not allowed in this objset
Also below are the lines copied from obj.conf that I added.
Init fn="load-modules" funcs="wl_proxy,wl_init"\
shlib=/data/iasuser2/webserver/https-ias02.mygazoo.com/libproxy.so
Init fn="wl_init"
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl_proxy \
WebLogicCluster="localhost:7001,localhost:7002,\
localhost:7003" PathTrim="/weblogic"
</Object>
Is NES plug-in supported with WLS 7.0. My version of iPlanet webserver
is 6.0 and I am on Solaris 8.
Shiva.
Hi,
I am not able to configure NES with weblogic 7.0. I created a domain
with an admin server and 3 clustered servers. When I tried to configure
NES it is giving me these errors.
[06/May/2002:18:41:26] failure ( 1530): Invalid configuration: File
/data/iasuser2/webserver/https-ias02.mygazoo.com/config/server.x
ml, line 32, column 15: Error processing obj.conf line 1: init functions
are not allowed in this objset
Also below are the lines copied from obj.conf that I added.
Init fn="load-modules" funcs="wl_proxy,wl_init"\
shlib=/data/iasuser2/webserver/https-ias02.mygazoo.com/libproxy.so
Init fn="wl_init"
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl_proxy \
WebLogicCluster="localhost:7001,localhost:7002,\
localhost:7003" PathTrim="/weblogic"
</Object>
Is NES plug-in supported with WLS 7.0. My version of iPlanet webserver
is 6.0 and I am on Solaris 8.
Shiva.
Similar Messages
-
ConnectionPool problems with WLS 7.0 and Oracle 9.2
Hi,
We are using WLS 7.0 SP4, and Oracle 9 and the Oracle thin driver type 4. In our
application on the productive system (and only there) we constantly encounter
a whole set of SQLExceptions which have all in common that the Connection from
the pool is not valid any more when the application tries to use it.
Typical, recurring error messages are:
- Exhausted ResultSet
- Connection has already been closed
- Closed Statement
- Transaction is no longer active - status committing
- NullPointerException at
weblogic.jdbc.pool.Connection.prepareStatement()
There are no special Statements which create these errors. They are spread at
random across practically every query the application creates, and the same queries
sometimes succeed and sometimes fail.
I double and triple checked that all Connections, Statements and ResultSets are
closed immediately after use. As an example, I attached a code snippet and a resulting
StackTrace which.
The problem also seems to occur only with an (unknown) minimum of concurrent usern,
since in the approval tests on an almost identical test system these errors never
occurred.
I also followed the advice from Oracle and installed the latest Oracle JDBC driver
(Oracle 10g) - to no avail.
What else can I do?
Another question: Is it correct that my Oracle JDBC driver is in the application
classpath (via a reference in the Manifest file of the application jar), not in
the system classpath? There has never been a problem with that, but in a Newsgroup
answer from Nov 10, 2003 (subject: "ResultSet closes prematurely"), Joe Weinstein
suggested to "get it listed at the
front of the -classpath argument that the startWebLogic script creates for the
java line that starts the server".
I hesitate to do so, since the driver is in a standard WebApp- directory, WEB-INF/lib.
Is it possible and safe to add a jar located there to the system classpath? If
it is possible, why is it necessary?
Best regards,
Andreas Zehrt
[CodeSnippetsAndStackTraceForConnectionPoolProblem.txt]Andreas Zehrt wrote:
Hi Joe,
Your hint that there is a threading problem was right:
On further investigation of the code I found out that the class that passes the
Connection to the DAO not only stores it as a member at some point (which is not
a good idea anyway) but is also a singleton - then, of course, it's no surprise
that the Connection gets invalid in a incalculable way when concurrent threads
share it.
The singleton instantiation was not so obvious because the way of instantiation
is controlled by a configuration parameter that can be overridden at different
levels.
I changed it and the productive logfiles indicate that the SQLExceptions related
to that class have disappeared.I am happy to have helped.
So, thanks a lot for the advice.
But I am still wondering why this code has worked for so long a time with WLS
5.1 and Oracle 8 (the system has been productive for over 2 years). Even in the
approval tests with WLS 7.0 and Oracle 9, we did not run into problems, although
it was multi-user environment.Mo idea.
I still believe that there is a difference between WLS 5.1 and 7.0 in the way
it treats pooled Oracle JDBC Connections. I wished both Oracle and Bea could be
a little more explicit about those changes and possible version incompatabilities
beyond the general advice "use the latest thin driver".Though I can think of no change to our pooling which would have had any material
effect in this case, I will certainly do what I can to see that our documentation
is explicit about changes.
Joe
Best regards, Andreas
Joe Weinstein <[email protected]> wrote:
Hi Andreas.
Andreas Zehrt wrote:
Hi,
We are using WLS 7.0 SP4, and Oracle 9 and the Oracle thin driver type4. In our
application on the productive system (and only there) we constantlyencounter
a whole set of SQLExceptions which have all in common that the Connectionfrom
the pool is not valid any more when the application tries to use it.
Typical, recurring error messages are:
- Exhausted ResultSetThat is typically if the statement that created it is either re-executed
or closed.
- Connection has already been closedAs described. If you give a stacktrace, we could make a debug patch which
would show
where it was originally closed.
- Closed Statementsame as above.
- Transaction is no longer active - status committingThat implies your code is obtaining a connection from a transactional
datasource,
and then later trying to use it after the transaction which it was associated
with,
is finished.
- NullPointerException at
weblogic.jdbc.pool.Connection.prepareStatement()Maybe any of the above.
There are no special Statements which create these errors. They arespread at
random across practically every query the application creates, andthe same queries
sometimes succeed and sometimes fail.
I double and triple checked that all Connections, Statements and ResultSetsare
closed immediately after use. As an example, I attached a code snippetand a resulting
StackTrace which.
The problem also seems to occur only with an (unknown) minimum of concurrentusern,
since in the approval tests on an almost identical test system theseerrors never
occurred.
I also followed the advice from Oracle and installed the latest OracleJDBC driver
(Oracle 10g) - to no avail.
What else can I do?
Another question: Is it correct that my Oracle JDBC driver is in theapplication
classpath (via a reference in the Manifest file of the applicationjar), not in
the system classpath? There has never been a problem with that, butin a Newsgroup
answer from Nov 10, 2003 (subject: "ResultSet closes prematurely"),Joe Weinstein
suggested to "get it listed at the
front of the -classpath argument that the startWebLogic script createsfor the
java line that starts the server".
I hesitate to do so, since the driver is in a standard WebApp- directory,WEB-INF/lib.
Is it possible and safe to add a jar located there to the system classpath?If
it is possible, why is it necessary?I was only concerned to ensure we know which driver we are working with.
We also ship
an oracle thin driver, which becomes obsolete soon...
I am concerned that your code creates pool connections to be used later.
The problems
can arise if more than one thread ever gets the same connection, or if
the connection
is used in the same thread, spanning transactions. It does also seem
that there may
be a threading issue, because if two threads each call the code to create
a connection,
and two connections are made, but one over-writes the other, the two
threads can
end up using the same connection, and closing it. The over-written one
never gets closed,
resulting in that leak message you got...
Joe
The Connection parameter is opened by a business component class, ComaServiceProviderClassicImpl.It is propagated through
several classes in the business layer, but not used, until the DAOtakes it to make the query.
So, the Connection is closed where it was opened, not in the DAO class.
public class ConcernDAOImpl extends BaseDAO {
public Collection getConcernsForIncidents(Connection conn, Collectionincidents)
throws DataAccessException, ConstraintException, ComaParseException{>
sqlMessage.append(")");
String sqlStmt = sqlMessage.toString();
PreparedStatement pstmt = null;
ResultSet rs = null;
try {
pstmt = conn.prepareStatement(sqlStmt);
rs = pstmt.executeQuery();
while (rs != null && rs.next()) {
final Concern concern =
new Concern(DAOUtil.getComaOID(rs, ComaDBNames.KDANR));
concern.setIncidentOID(DAOUtil.getComaOID(rs, ComaDBNames.KDAVGENR));
return concerns;
} catch (SQLException sqle) {
// Wrapps real SQL exception
String[] message = new String[]{sqle.getMessage(), sqlStmt};
throw new DataAccessException(ExpCode.S_ORACLE_SQL, message,
sqle);
} finally {
closeAll(rs, pstmt);
_logger.exitDebug(method);
Here, the Connection is acquired and finally closed
public class ComaServiceProviderClassicImpl {
public void updateComplaint(
final Request updateRequest,
final ResponseSingleElement response,
final Principal principal)
throws SystemException {
try {
logger.info("updateComplaint", "store incident");
// store the incident in the database
incidentManager.storeIncident(getConnection(), updateIncident);
// reload the incident from Cache and / or the databaseto get the ContactReferences.
Incident returnIncident = incidentManager.loadIncident(//IncidentManager passes the Connection to the DAO
getConnection(), updateIncident.getOID());
} catch (RemoteException rex) {
// remote exceptions
rollbackIfNecessary();
CoreUtils.unwrapRemoteException(rex, logger);
} catch (SystemException e) {
// all other exceptions --> rollback if necessary and rethrow
rollbackIfNecessary();
throw e;
} finally {
removeConnection();
logger.exitDebug("updateComplaint");
This is the resulting StackTrace:
sql exception: [Closed Statement: next] - sql statement: [select *
at de.deutschepost.ubbrief.coma.persistence.dao.ConcernDAOImpl.getConcernsForIncidents(ConcernDAOImpl.java:363)
at de.deutschepost.ubbrief.coma.persistence.dao.CachingConcernDAOImpl.getConcernsForIncidents(CachingConcernDAOImpl.java:129)
at de.deutschepost.ubbrief.coma.persistence.incidentmanager.IncidentManagerImpl.loadConcernStructuresIntoIncidents(IncidentManagerImpl.java:1067)
at de.deutschepost.ubbrief.coma.persistence.incidentmanager.IncidentManagerImpl.loadStructureForIncident(IncidentManagerImpl.java:320)
at de.deutschepost.ubbrief.coma.persistence.incidentmanager.IncidentManagerImpl.loadIncidents(IncidentManagerImpl.java:264)
at de.deutschepost.ubbrief.coma.persistence.taskmanager.TaskManagerImpl.selectTasksForUser(TaskManagerImpl.java:299)
at de.deutschepost.ubbrief.coma.service.z2.ComaServiceProviderZ2Impl.getTaskList(ComaServiceProviderZ2Impl.java:113)
at de.deutschepost.ubbrief.coma.service.z2.ComaServiceProviderZ2Bean_1dhrj7_EOImpl.getTaskList(ComaServiceProviderZ2Bean_1dhrj7_EOImpl.java:154)
at de.deutschepost.ubbrief.coma.sbba.z2.CMPGetTaskList.runServiceMethod(CMPGetTaskList.java:64)
at de.deutschepost.ubbrief.coma.sbbx.sp.BasicMethodProvider.execute(BasicMethodProvider.java:145)
at de.deutschepost.ubbrief.coma.sbba.z2.CMPGetTaskList_9b9mv5_EOImpl.execute(CMPGetTaskList_9b9mv5_EOImpl.java:46)
at de.deutschepost.ubbrief.coma.sbba.z2.CMPGetTaskList_9b9mv5_EOImpl_WLSkel.invoke(UnknownSource)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:159)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:263)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:230)
at de.deutschepost.ubbrief.coma.sbba.z2.CMPGetTaskList_9b9mv5_EOImpl_WLStub.execute(UnknownSource)
at de.deutschepost.ubbrief.backbone.jazz.impl.core.RequestHandlerImpl.handleRequest(RequestHandlerImpl.java:115)
at de.deutschepost.ubbrief.backbone.common.impl.core.rpc.server.ServerKernelImpl.handleTransportMessage(ServerKernelImpl.java:270)
at de.deutschepost.ubbrief.backbone.common.impl.core.messaging.MessageTransport.handleMessage(MessageTransport.java:454)
at de.deutschepost.ubbrief.backbone.common.impl.core.KernelFacade.handleMessage(KernelFacade.java:209)
at de.deutschepost.ubbrief.backbone.jazz.impl.backbone.BackboneBean.messageArrived(BackboneBean.java:637)
at de.deutschepost.ubbrief.backbone.jazz.impl.backbone.BackboneBean_ina9d7_ELOImpl.messageArrived(BackboneBean_ina9d7_ELOImpl.java:105)
at de.deutschepost.ubbrief.backbone.jazz.impl.transport.receive.LocalQueueReceiveBean.deliverMessage(LocalQueueReceiveBean.java:43)
at de.deutschepost.ubbrief.backbone.jazz.impl.transport.receive.AbstractMessageReceiveBean.onMessage(AbstractMessageReceiveBean.java:127)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:377)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:311)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:286)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2351)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2267)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:234)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:210)
####<May 26, 2004 12:18:43 PM CEST> <Warning> <JDBC> <S0048016> <REMA20Z><Finalizer> <kernel identity> <> <001074> <A JDBC pool connection leak
was detected. A Connection leak occurs when a connection obtained from
the pool was not closed explicitly by calling close() and then was disposed
by the garbage collector and returned to the connection pool. The following
stack trace at create shows where the leaked connection was created.
Stack trace at connection create:
at weblogic.jdbc.pool.Connection.<init>(Connection.java:66)
at weblogic.jdbc.pool.Driver.allocateConnection(Driver.java:294)
at weblogic.jdbc.pool.Driver.connect(Driver.java:210)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:373)
at weblogic.jdbc.jts.Driver.connect(Driver.java:129)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:287)
at de.deutschepost.ubbrief.coma.core.ComaComponentImpl.getConnectionFromPool(ComaComponentImpl.java:163)
at de.deutschepost.ubbrief.coma.core.ComaComponentImpl.getConnectionInternal(ComaComponentImpl.java:135)
at de.deutschepost.ubbrief.coma.core.ComaComponentImpl.getConnection(ComaComponentImpl.java:99)
at de.deutschepost.ubbrief.coma.persistence.customermanager.CurryCustomerManagerImpl.findCustomers(CurryCustomerManagerImpl.java:73)
at de.deutschepost.ubbrief.coma.service.z2.ComaServiceProviderZ2BaseImpl.resolveCustomerInstances(ComaServiceProviderZ2BaseImpl.java:808)
at de.deutschepost.ubbrief.coma.service.z2.ComaServiceProviderZ2Impl.getTaskList(ComaServiceProviderZ2Impl.java:213)
at de.deutschepost.ubbrief.coma.service.z2.ComaServiceProviderZ2Bean_1dhrj7_EOImpl.getTaskList(ComaServiceProviderZ2Bean_1dhrj7_EOImpl.java:154)
at de.deutschepost.ubbrief.coma.sbba.z2.CMPGetTaskList.runServiceMethod(CMPGetTaskList.java:64)
at de.deutschepost.ubbrief.coma.sbbx.sp.BasicMethodProvider.execute(BasicMethodProvider.java:145)
at de.deutschepost.ubbrief.coma.sbba.z2.CMPGetTaskList_9b9mv5_EOImpl.execute(CMPGetTaskList_9b9mv5_EOImpl.java:46)
at de.deutschepost.ubbrief.coma.sbba.z2.CMPGetTaskList_9b9mv5_EOImpl_WLSkel.invoke(UnknownSource)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:159)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:263)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:230)
at de.deutschepost.ubbrief.coma.sbba.z2.CMPGetTaskList_9b9mv5_EOImpl_WLStub.execute(UnknownSource)
at de.deutschepost.ubbrief.backbone.jazz.impl.core.RequestHandlerImpl.handleRequest(RequestHandlerImpl.java:115)
at de.deutschepost.ubbrief.backbone.common.impl.core.rpc.server.ServerKernelImpl.handleTransportMessage(ServerKernelImpl.java:270)
at de.deutschepost.ubbrief.backbone.common.impl.core.messaging.MessageTransport.handleMessage(MessageTransport.java:454)
at de.deutschepost.ubbrief.backbone.common.impl.core.KernelFacade.handleMessage(KernelFacade.java:209)
at de.deutschepost.ubbrief.backbone.jazz.impl.backbone.BackboneBean.messageArrived(BackboneBean.java:637)
at de.deutschepost.ubbrief.backbone.jazz.impl.backbone.BackboneBean_ina9d7_ELOImpl.messageArrived(BackboneBean_ina9d7_ELOImpl.java:105)
at de.deutschepost.ubbrief.backbone.jazz.impl.transport.receive.LocalQueueReceiveBean.deliverMessage(LocalQueueReceiveBean.java:43)
at de.deutschepost.ubbrief.backbone.jazz.impl.transport.receive.AbstractMessageReceiveBean.onMessage(AbstractMessageReceiveBean.java:127)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:377)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:311)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:286)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2351)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2267)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:234)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:210) -
General install and deployment problem with WLS clustering on two boxes
Hi,
I've come across a general installation problem with WLS with a cluster spanning two different physical machines and two Managed Servers, one Managed Server per physical machine.
The problem is, starting from scratch, you install WLS on both physical machines. You can then use the config wizard to create the domain, cluster and managed servers, but this is a manual typing in process.
So we've now got a WLST Script which we run with "java weblogic.WLST domaincreate.py domain.properties". This is good as it creates the domain, cluster, managed servers and JMS modules.
Now the trouble is, it doesn't do anything to the 2nd physical machine which will be running only the 2nd Managed Server.
One dirty way to get around this in order to start the 2nd managed server was to copy the domain directory to the 2nd server, but I'm sure this is bad practice and what you can actually do is improve the WLST script to actually, but the same as the config wizard and dump the nessary information to the 2nd physical machine in order so you don't need to copy the domain directory across so that it will startup straight after running the WLST.
Any help appriecated.
Surfbum.Hi I think I've found the answer. You can build a managed server template using the pack command.
http://e-docs.bea.com/common/docs90/pack/tasks.html -
I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,
Think you need to provide some more details about what you are connecting
-
I just finished downloading and attempting the install of ios 7 on my iPhone 5. I'm using the newest version of iTunes.
And now, I'm stuck at the screen with the iTunes logo and the plug. But no matter how many times I try, recovery mode will not work. My phone is currently useless unless I can figure this out.No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I have a problem with the effect gallery and the saving libraries in Illustrator CS6
Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP. -
I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again
Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library. -
101 Problems with my iPod Touch and iTunes...Almost
It really feels like I have 101 problems with my iPod touch and iTunes.
For some time now my iPod Touch have been using alot of batterypower and the battery is often discharged very fast. It discharges alot faster now than when I brought the Touch.
Also when I plug the iPod Touch to my computer it doesn't charge, it does the oposite of that, it's disharges and it does that ALOT faster than normal
There is also a problem regarding connecting the iPod Touch to iTunes. It doesn't connect to iTunes directly after I have plugged it in. It feels really random and it lives it own life it seems like.
If I accomplish to connect ut to iTunes it doesn't sync every single time. The computer / iPod Touch hangs and nothing happens. Soemtimes it works, sometimes it doesn't, like I said before - It feels really random!
Now to a BBIIGG problem. A week ago my girlfriend changed my password on my iPod Touch. When she typed the password into the login screen, it failed, she had forgotten the password / she thought that she picked that password when she changed it. Anywho, I didn't panic becuase I knew that I could lock it up by iTunes.
But, iTunes gives me a error while trying to restore the iPod Touch saying that there is no update avaiable and after that nothing happens. I tried to do the Sleep / Power + Home trick to set the iPod Touch into a recovery mode but iTunes gave me a unknown error.
I tried to update iTunes from my version to the new 8.0 version but when I do so it gives me a error saying that iTunes.msi can not be found and it can't uninstall the previous version :S
So, now I have a unusable iPod Touch, I can't do nothing with it.
Like I said, It's really feels like I have 101 problems ;D.
Lucky I have my old iPod so I can listen to Music :P
Message was edited by: GvrkanAre you running windows xp or vista? I know the solution for vista but not for xp. My mate had the same problem but he has a vista.
Let me know what you are running. -
Apache-soap Problem with WLS 5.1sp9
I have problem with WLS 5.1sp9.
My environment is the following :
jaf-1.0.1
javamail-1.2
soap-2.2
xerces-1.4.4
and I want to call EJB.
So, I write some EJB and deploy it.
And rpcrouter work!!
Success to deploy the Service.
But I run into problem with calling this ejb.
This error is the following.
SOAP-ENV:Server.BadTargetObjectURI
Unable to resolve target object: BC2_BoardSync
please, help me.
here's my example..
ps.
sorry for my poor English..T_T
[ws5.10.zip]
[vb.zip]I have problem with WLS 5.1sp9.
My environment is the following :
jaf-1.0.1
javamail-1.2
soap-2.2
xerces-1.4.4
and I want to call EJB.
So, I write some EJB and deploy it.
And rpcrouter work!!
Success to deploy the Service.
But I run into problem with calling this ejb.
This error is the following.
SOAP-ENV:Server.BadTargetObjectURI
Unable to resolve target object: BC2_BoardSync
please, help me.
here's my example..
ps.
sorry for my poor English..T_T
[ws5.10.zip]
[vb.zip] -
Problems with Cocoon 2.03 and Weblogic 6.1 SP3
I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try to deploy
the cocoon.war.
Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
(after I changed cocoon.xconf to use the following transformer factory: org.apache.xalan.processor.TransformerFactoryImpl).
However, when I deploy the cocoon.war through the weblogic console and try to
invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread: '7' for
queue: 'default'/Handler: Error compiling sitemap
java.util.zip.ZipException: The system cannot find the file specified
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:110)
at java.util.zip.ZipFile.<init>(ZipFile.java:125)
at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
at java.lang.Thread.run(Thread.java:484)
I understood that there were problems when the cocoon.war file that did occur
when you unpacked the war, but I believed that these problems did not occur with
WLS6.1 SP3.
Has anyone else encountered this problem and solved it? Any help would be greatly
appreciated.
Thanks in advance.
PaulThis how I got Cocoon 2.04 up and running on WLS 6.1.4
Download the Cocoon source from http://xml.apache.org/cocoon/dist/
Remove all but the following JARs from lib/optional:
commons-jxpath-1.0.jar
jing-20020724.jar
resolver-20020130.jar
servlet_2_2.jar
commons-logging-1.0.jar
jtidy-04aug2000r7-dev.jar
rhino-1.5r3.jar
xt-19991105.jar
Update lib/jars.xml to reflect these changes
Issue build commands:
./build.sh clean (Note: Always clean first!)
./build.sh -Dinclude.webapp.libs=yes -Dexclude.webapp.samples=yes -Dexclude.webapp.documenation=yes
-Dexclude.webapp.javadocs=yes webapp
Copy the following JARs to your WLS instance’s lib directory:
xercesImpl-2.0.0.jar
xml-apis.jar
xalan-2.3.1.jar
xt-19991105.jar
java/lib/tools.jar
Sample of config/SERVER_NAME.setenv
LIB=/path/to/lib
JARS=$LIB/xercesImpl-2.0.0.jar:$LIB/xml-apis.jar:$LIB/xalan-2.3.1.jar:$LIB/xt-19991105.jar:/opt/java1.3/lib/tools.jar
JAVACLASSPATH=$JARS:.:$JAVACLASSPATH
JAVA_HOME=/opt/java1.3
Deploy the resluting cocoon.war and you should have a Cocoon up and running that
can do the XML->HTML Hello World sample. The status page works fine too.
My advice is to launch this stripped configuration first and if needed add more
features later by adding the JARs of your choice to the class path (or add the
to your webapp-build if you are confident that WLS are capable of handling their
manifests).
Good luck
/Peter
"Paul Petley" <[email protected]> wrote:
>
>
I am having problems with Cocoon 2.03 and Weblogic 6.1 SP3, when I try
to deploy
the cocoon.war.
Cocoon works fine when I unpack the cocoon.war into ...\mydomain\applications
(after I changed cocoon.xconf to use the following transformer factory:
org.apache.xalan.processor.TransformerFactoryImpl).
However, when I deploy the cocoon.war through the weblogic console and
try to
invoke cocoon (http://localhost:7001/cocoon/) I get the following error:
ERROR (2002-09-26) 11:28.40:859 [sitemap] (/cocoon/) ExecuteThread:
'7' for
queue: 'default'/Handler: Error compiling sitemap
java.util.zip.ZipException: The system cannot find the file specified
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:110)
at java.util.zip.ZipFile.<init>(ZipFile.java:125)
at weblogic.utils.zip.ZipURLConnection.getInputStream(Handler.java:49)
at org.apache.cocoon.components.source.URLSource.getInputStream(URLSource.java:151)
at org.apache.cocoon.components.source.URLSource.getInputSource(URLSource.java:223)
at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.generateResource(ProgramGeneratorImpl.java:318)
at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.createResource(ProgramGeneratorImpl.java:282)
at org.apache.cocoon.components.language.generator.ProgramGeneratorImpl.load(ProgramGeneratorImpl.java:196)
at org.apache.cocoon.sitemap.Handler.run(Handler.java:228)
at java.lang.Thread.run(Thread.java:484)
I understood that there were problems when the cocoon.war file that did
occur
when you unpacked the war, but I believed that these problems did not
occur with
WLS6.1 SP3.
Has anyone else encountered this problem and solved it? Any help would
be greatly
appreciated.
Thanks in advance.
Paul -
I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer. -
I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!
The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more. -
I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.
Have a look here > http://support.apple.com/kb/TS1646
-
Communication problem with Adobe 9.0 and HP Printer when I scan
I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>
Maybe you are looking for
-
when i try to play a video from my library... or watch a movie or a podcast... itunes stops working!! help.... and this happened right after i updated itunes!
-
How to remove extra blank spaces from log file.
i have created a log file which contain the logs of a program. the logs are getting created fine for the first execution of the program but from the second time the log file is getting blank space's after every character. i have used the code to app
-
Loading FF4 wiped out a large number of tabs, how do I restore?
I thought I was loading a security update. WHAT?! ALL MY TABS I WAS USING ARE WIPED OUT? Really? Or have you added a way to restore them? Apparently the default setting on FF4 is to destroy the preserved tabs during the update. My browser had a large
-
Hi, I have a date in the format ddddd, which represents the number of days since December 28,1800. I want to be able to convert this to a java date and also be able to convert back to this format. I've tried calculating the offset and adding it to a
-
TalentFramework module - Position Details Panel General Information
Dear Nakisa Experts, TalentFramework module I would like to know in Position Details Panel > General Information. May I know how: 1. to make field Org Unit field data unclickable. 2. to enable additional fields Cost Centre and Qualification/Experi