Problems with WMP54gs card to WRT300n Router Connecting

Does anyone have any suggestions for this issue I am having with my wireless???
I have a WMP54gs pci card and trying to connect to a WRT300n Router but when I try to connect it will never get an ip.  I know each of them work just not with each other.  With the card I am able to connect to the actual 2wire DSL modem but not the router and I have other computers connected to the router.
I have tried everything I can think of even gone as far as re-installing windows.
Message Edited by tabbate on 03-24-2009 07:23 AM

You need to Update the Drivers for your Wireless Adapter...Download the Drivers from here
Once you have downloaded the drivers you need to unzip the file...After you unzip the file you should un-install the adapter drivers/software...Reboot your computer...You should see a message found new hardware...Select the option Install it from a specific location, then select Include this location in Search and browse to the place where you have unzipped all the files and select the Driver folder and click O.k...Then click Next and it should install the adapter drivers...
NOTE : This installation doesn't install the software(Linksys Monitor)...
Once the Adapter is installed, Click on the Start button >>> Control Panel >>> Network Connections- Right click on the "Wireless Network Connection" icon and select "View Available Wireless Networks"- If you see your wireless network in the list, highlight it by 'single' clicking on it- Now click on the 'Connect' button below- If your wireless network is secured, it would ask you to provide the network key- Provide the wireless network key and confirm it again in the confirmation box and click "Connect".

Similar Messages

  • HT204409 I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network.  I know there are several networks nearby. Is this a problem with my phone or my router?

    I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network.  I know there are several networks nearby. Is this a problem with my phone or my router?

    I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
    Go to Settings > WiFi and turn it OFF.
    Next go to General > Cellular > Cellular Data and turn it OFF
    Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
    Finally go back to General > Cellular > Cellular Data and turn it ON.
    I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
    Hope this helps!

  • Problems with a WRT54G wireless linksys router.

    Hello, I'm having problems with my WRT54G linksys wireless router.
    With this router, I tend to get lag spikes and often disconnect while playing online games at a certain time. The spikes usually get worse
    during the afternoon/evenings (2pm-12am PST). 
    Some information about my setup:
    Firmware version: v.8.00.7
    Shaw high speed cable (i think ~10mbit connect)
    xp/vista OS (two computers linked up via router)
      - Both computers are connected via wire, not wireless
    I've changed settings for my router through advice, but nothing seems to work. Nobody else is connected to my router because I get nothing
    in the logs and the DHCP client list has only 2 IPs. I'm sure my router is the one giving me lag spikes because I sometimes connect my
    modem directly to my computer (the XP) and receive no lag spikes. Someone does use wireless, but I turn wireless off at times so that
    isn't the problem. I've also secured my wireless, so I know it isn't the problem.
    Anyone know what's causing these lag spikes and how I can fix it? Do I need a new router?
    If anymore information is needed, please do not hesitate to ask.
    Message Edited by Dysouk on 10-17-2009 12:24 AM
    Not so computer savvy

    Try to readjust the wireless settings of the router...Open the linksys setup page and try the following settings...
    - Reduce the MTU size to 1364.
    - Change the Wireless Channel to 11-2.467GHz.
    - Under Advanced Wireless Settings,Change the Beacon Interval to 75,Fragmentation Threshold to 2304,RTS Threshold to 2304
    Now,check the difference...If you are still facing the same problem then,try to upgrade/reflash the router's firmware,reset the router and reconfigure it from the scratch.

  • Problem with RSC card on sun fire v490

    Hi all,
    I have a little problem.
    I got few v490 that were already used.
    When I connect to the management port of the RSC card I get the prompt of the RSC password, somthing i don't have.
    The OS doesn't get loaded and I can't do anything. ( if I had access to the OS I would have reseted the password)
    So now, I got left with the only option i thought of.
    1. Disconnect the RSC card,
    2. This will force the output of the consol to go to the serial port(tty).
    3. Jumpstart the machine (beacuse I don't even have the password for the machine)
    4. connect the RSC card, and reset the password.
    There is someone here that encountered this problem??
    Maybe there is a jumper that can reset the RSC password. i don't know... every response will be great!
    Thanks!!!

    Hi,How to set my link up in solaris 10 ?
    I dont know want happend to my machine solaris v440 it suddenly disconnected from n/w and finally i came to know that is a problem with NIC card..i din't find any light's glowing back side of the machine at NIC card.
    can any one help me in this pls how can i proceed furture for getting my NIC back?
    and i have excuted few commands
    #ndd -set /dev/ce instance 0
    #ndd -set /dev/ce adv_1000fdx_cap 1
    #ndd -set /dev/ce adv_autoneg_cap 0
    I have got dladm show-dev is
    ce0 link: unknown speed: 1000 Mbps duplex: full
    ce1 link: unknown speed: 0 Mbps duplex: unknown
    I dont understand that why my link is showing still unknown ...any help..

  • Problems with Airport Card

    I move back and forth from school to home, and I've never had a problem with my card before. I recently restored my compuer back to its factory settings, and it was running great with my Airport Express. I came home after moving, and my computer won't read the WPA hooked up in my house. It says I am connected, but won't let me access the internet. I'm not sure why. We tried rebooting the connection, I've looked on my computer, used system preferences and everything. I did notice when I tried to use the Network Setup Assistant, it said the password I used to connect was wrong, but when my computer uses the airport icon at the corner of the screen, it accepts the password. Any ideas on how to fix this?
    iBook G4   Mac OS X (10.3.9)  

    An additional distressing note -- I went back to aforementioned building with the 10.4.5 Powerbook last night. Did a cold boot...and the Airport Express picked up the correct network DHCP info immediately. Roamed between a couple of WAPs, surfed a couple of sites, then sat down and tried to duplicate this feat...by re-booting at least 6 more times. Nada. I once again got factory default IP addresses on each attempted reboot. I changed nothing from the network settings I'd tried last week with this machine nor were any changes made to the network or WAPs. DHCP didn't work last week on several attempts (and reboots), worked ONCE yesterday on the first boot, then nothing again on the subsequent reboots.
    Again, I'm stressing that there don't "seem" to be problems with the network or WAPs because Windows clients consistently obtain DHCP and authenticate without issue.
    Does anyone have any ideas?

  • HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be..

    I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.."  HELP!  Not sure what my settings shoud be...
    I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • HT3180 MY APPLE TV BEGAN IN A FAST BLINKING MODE.  WHAT CAN I KNOW FROM THIS OTHER THAN THERE IS A "PROBLEM" OR, IS IT DUE TO A PROBLEM WITH MY WIRELESS NET GEAR ROUTER NOT SENDING THE SIGNAL ??

    all of a sudden, I do not have internet connectivity.  Checked all network settings and TV recognizes that a wireless network is operational. the internet signal to my imac is fine. what does the rapid flashing APPLE TV box indicated other than that there is a problem ??

    The flashing light is indicative of a problem with the unit. I would connect to iTunes to restore
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • Problem with Progress DB while using to connect using JDBC Adapter

    Hi,
      I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
    Error during database connection to the database URL  jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb 
    /devsche/i_apoext.db using the  JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb 
    /devsche/i_apoext.db "
    I tried using the following all URLs,
    1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.       
    2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db     
    3.                                                      
    jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb 
    /devsche/i_apoext.                                      
    4.                                                      
    jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb 
    /devsche/i_apoext.db.                                  
    Can anyone please help me out in solving this issue.
    May be the cause for this is :
    1) The Wrong URL  format
    2) CLASSPATH is not setted properly..
    Can you look more into this stuff.
    Thanks,
    Soorya.

    Hi,
    To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
    Just check this note 831162.
    Also, check this PDF to install Drivers in XI,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

  • I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected. Please help me out!!

    I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!

    Assuming you entered the correct WiFi password for your network, see these articles:
    iOS: Troubleshooting Wi-Fi networks and connections
    iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

    Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
    I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
    I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
    The relevant log is the following:
    [2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||ZWaveUtil
    remote.workingdirectory 
    remote.name ZWave Adapter Utility
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=administrator
      redirectionGUID = 
      proxyHost = 200.5.68.10
      proxyPort = 8080
      sessionId = -1
    [2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
    [2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
    [2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    [2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
    [2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
    ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
    RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
    [2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
    RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    [2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    [2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

    My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
    [2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||chrome
    remote.workingdirectory 
    remote.name Google Chrome
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username Administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=Administrator
      redirectionGUID = 
      proxyHost = 
      proxyPort = 0
      sessionId = -1
    [2014-Jan-14 16:58:13] RDP (0): Not using any proxy
    [2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
    RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
    RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
    Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
    Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
    find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
    [2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||chrome
    remote.workingdirectory 
    remote.name Google Chrome
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=administrator
      redirectionGUID = 
      proxyHost = 
      proxyPort = 0
      sessionId = -1
    [2014-Jan-14 17:09:27] RDP (0): Not using any proxy
    [2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
    RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
    RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
    I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

  • Problem with SD card reader

    I have problem with 4-in-1 card reader in my laptop.
    When I insert 64 MB microSD (with adapter of course) everything is working fine, but 1024 MB microSD isn't working. dmesg shows
    mmc0: unrecognised SCR structure version 1
    mmc0: error 4 whilst initialising SD card
    The card is allright, because in my friend's laptoptop it works fine.
    Can somebody help me?

    Hi
    I had a problem with my card reader also.
    When I run the command "groups" noticed my user wasn't in the avahi group.
    Ran :
    sudo gpasswd -a <myuser> avahi
    (substitute "<myuser>" by your user)
    Inserted the card again and.. voila, it worked!
    Greets
    Nuno lopes

  • Yoga 11s Problem with SD Card reader

    Hi.
    Just bought a Yoga s11 8/256gb with windows 8 64bit.
    When i put in the SDHC card (Is use in camera) in the SD card reader nothing happends..
    Tried to download drivers, but not sure if i got the correct one.

    Hi
    I had a problem with my card reader also.
    When I run the command "groups" noticed my user wasn't in the avahi group.
    Ran :
    sudo gpasswd -a <myuser> avahi
    (substitute "<myuser>" by your user)
    Inserted the card again and.. voila, it worked!
    Greets
    Nuno lopes

  • My phone is iphone 4 (GSM)-american type with IOS5.11 , i have problem with sim card failer (korek type)

    my phone is iphone 4 (GSM)-american type with IOS5.011 , i have problem with sim card failer (korek type)

    Sounds like your iPhone is locked to AT&T. Contact them to see
    if you qualify for unlocking.
    This link may provide some assistance:
    unlocking AT&T iPhones (thanks to wjosten for the link)
    http://www.att.com/esupport/article.jsp?sid=KB414532#fbid=Ont7guWFCdY

  • Mega Player 536 problems with SD Card

    Hello, can any one help me here, i got me MSI mega player 536 , but i can't play files from SD card. I tried 4. diferent types of SD card. Player register the card, but when i try to open files i got message: "No files fund". I found test of player on www.hw.no, and they write in the test that Player has problems with SD card.
    Any one?

    It's hardware problem with player, i'll get a new one. Then we have to conclude that Mega player 536 has not problems with SD card. Thank's to every one on this forum.

  • Problems with Visa Card

    Hey guys, how are you?
    I just bought an IPhone and I´m trying to get some apps from the ITunes Store.
    I created an account but when I try to put my credit card number and security code (from the verse of the card), I get the error script: "Please enter valid Security Code".
    I don´t have any problem with my card, it´s working absolutelly normal with any other online shop around the world including Amazon, Ebay, etc...but in the ITunes store, I get this crap error!
    I just have this credit card and I don´t wanna do another from Credicard or Amex only because a bug of the system.
    Doing a research in past topics, I found other people with the same issue, but didn´t get any answer on how to solve this.
    Please, can someone help me?

    Contact iTunes.
    Apple - Support - iTunes - Contact Us

Maybe you are looking for

  • Publishing no longer works in latest Edge

    Publish seems to not be working in this latest Edge. All of our projects published using the latest version get stuck on the preloader. Not sure why but yesterday everything published fine. Today under the new Edge all of our files get stuck in the p

  • Integration based on a Query

    I need to create an interface based on an existing query by example: Select * from EMP Where ename = 'Peter' The Table of destination MWD_EMP received the same columns in the existing on Table of Origin. How do I create this interface?

  • MS Office Templates

    Good morning,   I have been using MSoffice 2011 for Apple for the last 9 months.  Typically, when I need to create a new document, for example, in Word, I open "new from template" then the below window appears.  Up to a few days ago, all templates wo

  • XML question export data to XML

    I need to export XML in a certain format. This is the first time i need to export XML. What i can do is: select xmlelement("IDpart",      xmlelement("ID", XMLAttributes( e.ID_SUBID AS "ID_SUBID"),           xmlelement("timeperiod", XMLAttributes( e.s

  • Why after SAVE(CREATE) my form is cleared?

    I am saving a record and the form gets cleared.  The row is inserted, but I need to go back to list and edit it. I do not have any process to clear the cache or a branch, since I states in the same page. Any idea? Efren