Problems with X-Fi Fatal1ty FPS Soundc

Hi,
At thirst i wanna excuse my bad english.
Now to my problem: I've bought that soundcard on friday, and i've a 2. SoundSystem and a Headset, i've connected the 2. System on the back of my Computer (on the Soundcard), and the Headset on the frontlabel from this Soundcard. So they worked together @ same time. But today i played with my Headset, and everything was ok, but from a second to the other, i didn't hear anything, and i couldn't talk in Teamspeak, cuz the mikrophone wont work too.
I've tried to connect the headset on the Soundcard, and it works!
I've uninstalled the whole Creative software too on my computer, and re-installed it, but the frontlabel don't works.
Can i fix that problem? Or may i have to use my warranty of that card?
I've to fix some things yet: As the problem started, that i didn't hear anything, i've watched the settings of the soundsoftware, and some settings were not avaible longer...like "Line-In 2 /Mik" , which i used for my microphone, after re-install these options wasn't avaible too.
To the re-install: I always used the full-installation, but as i re-installed i couldn't install the "entertainment center", the installation stopped there at 27% ...no error, no failure in Task-Manager..
I've tried to start with the remote maintenance the Multimedia-Software from creative, but it wont start.
Do i really have to change the soundcard with a new one?
ThX, DmX

hey Darkman,
since I never had this problem with installing this software, I cant really tell whats wrong, but you dont need it anyway to use the x-fi.
but you may want to try one thing, since it crashes at 27% something may still be in use, so check your task manager and close everything that has CT in its name. then try reinstalling again. If that still doesnt work, try to empty your temp folder, its located in documents and settings/user you are/local settings/temp
if that still doesnt work, try maybe something stupid, wait a bit longer than usual and keep the install window in the front to watch the process, maybe your pc is just a bit slowed down by other software so it may take longer than normal

Similar Messages

Any known problems with "Xtreme Game Fatal1ty Professional Series" and Nforc

Hello,
i plan to replace my audigy2 with a
"Xtreme Game Fatalty Professional Series".
There are known problems with the card itself and with the Nforce2 chipset?
My board:
MSI K7N2 Delta-L (nForce 2 Ultra400 chipset)
thanks
zivilistMessage Edited by zivilist on 0-3-20060:55 PM

If you are up for the battle that MIGHT transpire with either one of these cards then your welcome to it. EAX will work on games that nati'vely support EAX and the openAL API. Games that are direct sound only will require the ALchemy program to make them work correctly. You can find a list of openAL nati've games on the openAL site...sorry don't have a link for you right now but google it. You might be able to find the list of Direct SOund games that ALchemy works on by going to the ALchemy site as well.
For the most part, stuff is working but I would highly advise you do more research before purchasing any sound cards from Creative. Just check the forums and look under the Vista posts as well as here to get a taste of the issues many are having.

Problem with XFI platinum fatal1ty sound from panel but not from c

Hi
I just got an XFI platinum fatalty card with front panel, I have only been able to get sound out of the ports on the acctuall card for about 3 minutes then it screetched and went off. Since then the most I can get is an EXTREEMLY quiet (I need to turn up my speakers and the card volume to full) and distorted sound from my center and rear left speaker (5. set). However the wierd thing is when I plug in the headphones into the front panel it works perfectly, the thing is if i switch it back to speakers i have to restert before the headphones will work again.
I have tried to update the drivers but there are no newer ones, I figure I have it seated correctly or I would have no sound from the panel, I just dont know what to do.
its plugged into a Asus Crosshair nForce 590 SLI AM2 Motherboard, I have tried it in 2 different PCI slots and nothing changes, I'm running XP.
Help please, it would be much appreciated, I went through hell to get this card deli'vered and not its not working properly!!!
Any ideas?Message Edited by C4TS on -09-20072:42 AM

Is there anybody with any idea what the problem might be?

Problems with X-Fi Fatal1ty XtremeGamer p

Hello,?About a month ago my brother gave me his sound card because he said that sometimes it just quit on his computer and there would be no sound. I know he bought it in early 2007 and he is usually too lazy to return something when it isnt working so I got stuck with it and no hopes of returning it. When I first installed it on to my computer it worked beautifully. The sound was way better than the onboard audio that I was used to. I followed all instructions when installing it and then did a re-boot as it requested. When it started back up it was fine, movies, games, music, whatever I wanted sounded great. The computer was left running for a few days and everything was fine. One night when I got home I shut it down since I wasn't going to use it anymore and in the morning when I restarted it I got a message popping up saying "New Hardware Detected." Just like when I had first installed it. I tried my sound since I knew I had already installed the drivers and everything and I kept getting the message that? The?hardware the program is used with is not installed. So I checked my files and everything was still installed and I checked the card and it was seated properly and everything connected. I reinstalled the drivers and it asked to reboot again. Same problem on startup again "New Hardware Detected" as if i just did nothing. This was getting to be very frustrating... I uninstalled all the software the came with it and then deleted the registries bypening the "run" option on the startup menutype regedit into the run boxopen HKEY_LOCAL_MACHINEthen SOFTWAREand delete creative tech from there. Then reboot. I removed the card when?i shut it down, restarted, shut down again, reinstalled the card, then started again and installed everything again. I?rebooted it to finalize the installation and?everything worked fine again..... until I shut my computer down again.... When I start up afterwards?I get the same?"New Hardware Detected" like everything that just happened was forgotten, yet all the drivers and programs are still there just the hardware?is appearing to be "new" again. And yes I disabled the AC'97 Realtek onboard Audio in the BIOS?I tried moving it to different PCI slots and downloading new drivers but it continues to do the same thing.
My system specs:?Biostar Geforce 600-M9AMD Athlon 64 4000+ 2.4GHz Gb simpletech DDR RAM?Windows XP Media Center Edition Version 2002 SP2Samsung SP203N 20GB HDD 7200rpm?The mobo does use a nforce4 chipset but I do not get any of the usual problems like popping or crackling sounds like everyone else has mentioned. Any help would be greatly appreciated since I would hate to junk this nice looking sound card.

My thread has the same basic issue.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=277
I'll watch yours and I'll send info your way if I get anything useful.
For now, i have an RMA number. :-/

Problems with X-Fi Fatal1ty Plat & Inspire P7800

Hi there, I recieved my X-Fi Fatalty Platinum Champion and the P7800 Inspire 7.1 speakers today. From the speakers I get. Front Left, Front Right, Center, Rear Right and Subwoofer alright, but no sound at all from either Side or Rear Left. I checked the speakers themselves on the working speaker outputs and all seems good. I'm also getting a signal from each of the Line-Out ports of the S/C. I'm using Win XP Pro with SP2?
Message Edited by GrinningDragon on 10-22-2007 11:29 PM

I've solved the problem. The connector cable that came with the Inspire speakers had a kink in the Black and Grey leads. (Amplifier input).Resplicing, soldering and taping the wires have enabled lovely 7.1 surround immersion. Had me worried that I was going to have to test the return policy of the vendor there.

Problems with X-Fi Fatal1ty + Philips 3365

My system: Asus P5K SE
X-Fi Fataty
HT Philips 3365 with digital analog input
Creative Sound Blaster X-Fi series Driver 2.8.0008
Using the Creative's FlexiJack on the digital analog input of the Philips system. While testing the channels of my home theater, subwoofer sound are going trough the subwoofer (ok) but also the center channel. And testing the rear channels sound keep always from the frontal channels. When is in use, all 5. channels work but seems that rear duplicate de sound of frontals.

I've solved the problem. The connector cable that came with the Inspire speakers had a kink in the Black and Grey leads. (Amplifier input).Resplicing, soldering and taping the wires have enabled lovely 7.1 surround immersion. Had me worried that I was going to have to test the return policy of the vendor there.

When Firefox is not minimised, there are problems with jamming sounds and FPS drops.

Hello, I have some issues, when Firefox is not minimised. When I watch movie on my BS Player or playing World of Tanks and I have not minimised Firefox (there is a window, no matter it is maximised or just window), there are visible FPS drops, but when I minimise the Firefox window, it works just fine. Also when I connect my laptop to my sound amplifier with 2.1 speakers, I can hear a jamming, hamming and whirling, also works fine, when Firefox is minimised. Is there any way to remove this? Its quite annoying. I tried to disable all addons etc., nothing worked. Thanks.

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Problems with slow fps (or is my computer really that bad?) [solved]

I'm having quite some trouble with my fps in games like StarCraft 2 (actually it's just here that I noticed it). Anyway I've decided to test how good my computer actually is using unigine heaven benchmark.
And it's really bad. As I said I have slow fps in Starcraft in which fps is around 15, but in unigine it falls to average 4/5 depending on how I set it.
While my computer is quite old, it's still not that old, and I don't have any problem with other graphically demanding games like C&C3 or Medieval 2: Total War.
My hardware is:
System: Linux 2.6.36-ck x86_64
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ 2310MHz MMX+ 3DNow!+ SSE SSE2 SSE3 HTT
GPU: GeForce 8500 GT PCI Express 260.19.12
System memory: 2008 Mb
Video memory: 512 Mb
(this is what unigine "shows")
Also under "render" unigine shows this:
Renderer: NVIDIA NV50 512Mb
OpenGL vendor: NVIDIA Corporation
OpenGL renderer: GeForce 8500 GT/PCI/SSE2
OpenGL version: 3.3.0 NVIDIA 260.19.12
Found required GL_ARB_map_buffer_range
Found required GL_ARB_vertex_array_object
Found required GL_ARB_vertex_buffer_object
Found required GL_ARB_half_float_vertex
Found required GL_ARB_half_float_pixel
Found required GL_ARB_occlusion_query
Found required GL_EXT_texture3D
Found required GL_EXT_texture_cube_map
Found required GL_EXT_texture_sRGB
Found required GL_EXT_texture_swizzle
Found required GL_ARB_shader_object
Found required GL_ARB_vertex_shader
Found required GL_ARB_fragment_shader
Found required GL_ARB_draw_buffers
Found required GL_ARB_framebuffer_object
Found required GL_EXT_framebuffer_blit
Found required GL_EXT_framebuffer_multisample
Found optional GL_ARB_draw_instanced
Found optional GL_ARB_transform_feedback
Found optional GL_ARB_draw_elements_base_vertex
Found optional GL_ARB_blend_func_extended
Found optional GL_ARB_uniform_buffer_object
Found optional GL_ARB_geometry_shader4
Found optional GL_ARB_gpu_shader4
Found optional GL_EXT_Cg_shader
Found optional GL_ARB_texture_rg
Found optional GL_ARB_texture_array
Found optional GL_ARB_texture_snorm
Found optional GL_ARB_texture_multisample
Found optional GL_ARB_texture_compression
Found optional GL_ARB_texture_compression_rgtc
Found optional GL_ARB_seamless_cube_map
Found optional RGB10A2 render texture format
Shading language: 3.30 NVIDIA via Cg compiler
Maximum texture size: 8192
Maximum texture units: 32
Maximum draw buffers: 8
Which, while I'm no expert, for me seems quite OK.
So where's the problem?
Is my computer really that old already?
On the related note, sometimes KDE loses the window decoration or even more it just disappear. So it might be the nvidia driver (as you can see I use nvidia-beta).
But I'm not sure if it's the driver or is it the graphics card.
Thanks for any help. If nothing else you could at least tell your frame rate and hardware so I can compare if my computer is "where it supposed to be" or if something really is wrong with it.
Last edited by Primoz (2010-11-01 01:26:56)

Well I finally found the glxgears, and the fear I always feared, but didn't mentioned it in my OP came true. FPS is somewhere near the refresh rate of the monitor, and my monitor is also a TV (or should I say primary TV) so my refresh rate is 50hz or up to 60FPS. So I guess the actual and the biggest bottleneck is my monitor and not anything else. Well yeah not that my other hardware is any good, but I could say that the low FPS rate in StarCraft 2 and in Unigine Heaven is due to my bad monitor.
I can say this is solved, but not removed until I get a new monitor.
Edit: Actually there is another thing, how come that while my monitor refresh rate is 60; FPS in both Starcraft and Unigine are so much lover - instead of 60FPS there are from 4-17FPS.
Last edited by Primoz (2010-10-31 01:39:59)

Problems with FPS while gaming on MBPr Retina

Ok, I have a Macbook Pro Retina 2012. I recently started playing games on it, most seem to be ok but I'm running Windows Via VMware Fuision, it worked great...for a time. I am playing a game, that at times, has a lot of graphic qulaity and a lot going on at one time. I lowered the quilaty but still it seems jumpy like the the GPU cant keep up with the FPS. I and a 1Gb GPU. Is there anything else I can do to stop this and let in play as normal or this a problem with something different than that GPU?? I was looking into external GPUs but that seems WAY too expensive, at the moment until that design one espcailly for it. Just looking for some friendly advice.

Install Windows via BootCamp this allows the game you are playing to use all of the resources the computer has. Using VM Ware your computer has to power both Windows and Mac at the same time. Therefore performs slower. Also the GPU has to power a higher resolution screen (Retina Display) which will lower FPS.

Some problems with FPS

Good Evening everyone,I have one problem and I need to fix it of course
I have MSI GE70 2PE Apache Pro.This is my first notebook so I do not know a lot of things about gaming nooteboks.I am pretty happy with the performance when my notebook is plugged in but I have big problem with performance on battery.I can play on 40fps(for me not that bad) like for 10 minutes and then just suddenly my FPS dropped to 10-15FPS every time when my notebook is plugged out.And then it is really hard to play...
Sorry for my bad english I hope you understand me
Thanks

It's a gaming laptop which will do its best to consume both AC power and battery power to provide you the maximum performance. If you unplugged the AC power, of course it will affect the performance of the gaming experience since it can only consume power from the battery.
The important thing is, will you get FPS drops even when you're using both AC power and the battery?

Creative SoundBlaster X-Fi Fatal1ty FPS - Major Problem - RMA Ti

hello. i have been having major problems with my Creative SoundBlaster X-Fi Fatalty soundcard.i have had it since march 2007 and was fine for a couple of months, very pleased with it.?but it has now got to the stage where it will not boot my pc if the card is installed.i have done my best to see it working again. but one moment it will work.?next moment i will turn my pc on. the pc will not post/boot so i have to take the soundcard out in order for the pc to actually boot into windows. i have sent in a RMA request from ebuyer.?but im quite sad that the card is very poorly designed via the pins on the back that connects to the internal dri've bay addon. i believe that the pins are causing the card to not boot the pc. as its very easy for the pins to get bent.?i would love to know if anyone else had or is having a simular problem with this card?i have been looking for a replacement now. and after searching for awhile it would seem they released a Auzentech X-Fi Prelude 7. Sound Card but after checking the card it looks like they still have the poorly designed pins on the back of the card again... [color="#ff0000"]should i wait for a upgrade... [color="#ff0000"]or buy the Auzentech X-Fi Prelude 7. Sound Card?as the card i originaly own is now discontinued from ebuyer. regards, Cezare

card was faulty ordered a new one while i wait for my RMA. and the new card works fine. soon as i installed perfect.so indeed was a faulty card. and to the question did i install the card properlly... of course i did. otherwise i wouldnt have asked here. anyway. all fixed so far... but problems with my new headset now and the soundcard.

Problems with installing the X-Fi Xtreme Gamer Soundc

Hello,?I've a new X-Fi Xtreme Gamer Soundcard, but I'm not able to install it. I tried the CD, the driver on the page and the ISO somewhere in the forum. I get everywhere the same errormessage:?"No audio device that is compatible with this application can be found" I have deinstalled and deactivated the onboard sound in the bios. I have no idea what I can do to solve the problem. greetzM. Schwander?My system:- XP Prof- CPU: Intel Core Duo 2.66- Mainboard: asus p5b-e- graphic card: Nvidia GeForce 8800 GTS??

the soundcard is correctly in the slot ... (got the some problems with another slot)
now my device is found and i can start the installation, but after a several time, there's a bluescreen with something about "h20x2k.sys" written.Message Edited by wuff on 2-04-20070:22 AM

Problem with Fatal1ty X-Fi c

I'm having problems with my sound card. When I play the witcher in the very first act when i'm in the cave fighting, the sound gets fuzzy then goes out, and comes back when i stop fighting. Also in counterstike source when there's lots of action going on the sound gets fuzzy and sometimes goes out also.
Also, when I first installed the drivers on vista the computer would crash whenever i tried to open windows explorer or change any soundcard settings. So now I'm on XP.
I'm wondering if anyone else has the problems.
My system: ASUS A8N-E, Opteron 65, geForce 6800gs, 2gb ram
Thanks

I'm having problems with my sound card. When I play the witcher in the very first act when i'm in the cave fighting, the sound gets fuzzy then goes out, and comes back when i stop fighting. Also in counterstike source when there's lots of action going on the sound gets fuzzy and sometimes goes out also.
Also, when I first installed the drivers on vista the computer would crash whenever i tried to open windows explorer or change any soundcard settings. So now I'm on XP.
I'm wondering if anyone else has the problems.
My system: ASUS A8N-E, Opteron 65, geForce 6800gs, 2gb ram
Thanks

Problem with Fatal1ty X-fi when i using a m

Hello ( i first wanna apologies for my terrible english)
My problem, (many guys have the same problem on audigi platinum and X-Fi Plantium) comes when i?m using the microphone in the front jack.
The microphone is plugged in the front and the sound in the comeputer comes on channel "Line-in 2/Mic 2". To use the microphone i must now change from the standard channel in widows ("Microphone") to the channel that the microphone is on ("Line-in 2/Mic 2"). But when i starting any aplication like skype or cs windows is changing back to the "Microphone" channel...
do any of u guys know how i fix this problem?

The problem you're having is down to the games or applications that try to use the mixer and change to its own default settings. Some applications/game may have workaround for example Skype and CS but forcing a lock on the mixer would not be an ideal solution as this could introduce more problems with other applications that use the mixer, so it may fix one specific problem caused by one game/application, but cause several other problems instead.
Jason

Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3

I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow

Gusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears?

Problems with X-Fi Fatal1ty FPS Soundc

Similar Messages

Maybe you are looking for