Problems with x-fi titanium series.

Hello, i just got a x-fi titanium series sound card from newegg, i installed it and it was running fine with game, music, and movies, but first day i had it, i joined vent and i could all a sudden hear my voice in my headset, so i muted microphone, and it was fine, but i clicked settings in ventrilo, and it came back, so i unmuted it and then all of a sudden it went away, so it seems anytime i open vent or do anything but talk in vent, my voice can be heard in my headset, but i cant seem to be heard by anyone else. So i still have that problem, but today i started up vent, and all of a sudden my headset had a piercing loud noice in it, i did the same thing as mute and unmute the mic and it went away, any [email protected]

One more problem i seem to be having is it never saves settings, i set my mic volume to 20% and master volume to 80%, but it keeps reseting to defaults [email protected]

Similar Messages

  • Problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Prem

    I'm currently experiences problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Premium. When i'm trying?to burn CD's onto my Zen after?I burn the first one then click to burn another it freezes. Is there any patches i should be downloading to solve this problem??Can anyone help? Please!!!!!!!!
    ?Message Edited by studandydon on 07-29-20070:38 AM

    I have the same problem. It all started yesterday when I was installing the cd drivers in my new computer. I have searched numerous forums and some people had to return the product. Please admins help on this issue as I understand it is very serious.

  • Several problems with X-Fi titanium

    #several problems with X-Fi titanium? hello there,
    i already read a bit through the forums in hope to find a solution for my problems... but i didnt find any and english isnt my mother tongue so sometimes i didnt really understand...
    to my problems:
    i got my 2nd X-Fi titanium a few days ago (first one stoped working after 6 month usage)... i kinda hoped my previous problems would have been gone with the old card, but unfortenately they are still there...
    first: the card does recognize when i plug in my headset into my front pannel and the the sound gets redirected to them... good so far... but when i pull off my headset and i want the sound to go back to my speakers... nothing happens... the card doesnt realize, that the headset is pulled off... i always have to open the software and turn off the "mute speaker automaticl" (no idea how its called in english..., hope you understand)...
    the 2nd problem - and this is the worst one - is that from time to time the soundcard makes weird noise... like a scratching or crackling... its really horrible and the only way to get rid of that is sign off the computer and sign on again... this problem occurs without a warning... when i play a game (like WoW or FFXI online), or while im listening to music, sometimes even when i just work with office...
    i already sent a mail to CL and of course the regular answer: deinstall drivers/software, install the newest ones... i did that but nothing changed...
    is there any way to fix these problems? im a bit frustrated, since i spent a lot of money to get a decent/well quality...
    some informations about my PC:
    windows vista home premium, service pack
    intel core 2 duo @ 2.66GhZ
    2GB Ram
    Nvidia Geforce 8800 GT
    MSI P7N SLI Platinum
    hope you can help... ty in advance
    fen?

    'Re: several problems with X-Fi titanium? Sorry to hear you're still having problems.
    One more thing to check is that the correct drivers are installed. If you check in the device manager, make sure the Creative drivers are installed and not the Microsoft ones.
    Also check in your BIOS that the front panel audio is set to HDAudio.
    Make sure the on board audio is disabled as well.
    -- If that isn't the case
    I see that you've un-installed/re-installed the drivers... I hate to say, but...try again and make sure you have completely uninstalled the drivers before rebooting and reinstalling the latest 2.7.0007 drivers. Try a free uninstaller software called Revo uninstaller. It runs the softwares uninstaller then it searches the registry and HD for remnants.
    Message Edited by rc9ball on 08-5-2009 04:04 AMMessage Edited by rc9ball on 08-5-2009 04:0 AM

  • Problem with viewing the tv series "Gurren Lagann" in itunes.

    When I go to the itunes store and search gurren lagann the page loads fine but when I try to view the complete series itunes stops working. This problem happens with different accounts and on different computers.
    the itunes verson that is currently on my inspiron computer is 9.0.3.15
    is this a problem with itunes or is it a problem with my computers/accounts?

    Fault Module Name: WebKit.dll
    Fault Module Version: 5.31.21.8
    That's the rendering engine iTunes uses to display the Store contents.
    There's a newer version of webkit.dll in the most recent version of Apple Application Support (version 1.4.1 as I write this post). To update your Apple Application Support, the most straightforward procedure would be updating to iTunes 10.1.1.4 ... but if you're not keen on that, we could do it by updating your QuickTime to version 7.6.9 (there's a version 1.4.1 for Apple Application Support in the QuickTime 7.6.9 installer).
    If you want to go the QuickTime-update route, here's a link to the download page for QuickTime installers. (Get the installer that doesn't mention QuickTime ... the installer file should be called "QuickTimeInstaller.exe" rather than "iTunesSetup.exe" or "iTunes64Setup.exe".)
    http://www.apple.com/quicktime/download/
    ... does your iTunes behave better with the newer version of webkit.dll in place?

  • Problem with replacement of index series, change of base year

    Hi Experts!
    I try to explain my problem in Real Estate.
    In Italy from January 2011 the baseline (base year) national index of consumer prices for the entire community (NIC) and national consumer price index for families of workers and employees (CPI) moved from 1995 to 2010.
    So, I have to change the base year of index in Rent Adjustment.
    I think I have changed the base year from 1995 to 2010.
    (Path: Real Estate>Rent Adjustment>Index>Replacement of index series, change of base year)
    In table TIVAJINDXCON (previous was empty) now there is this record:
    SERIESTO: 08000
    BASEYEARTO: 1995
    SERIESFROM: 08000
    BASEYEARFROM: 2010
    CHAINDATE: 31.12.2010
    INDEXBASETO: 1,373
    But with transaction FOA0 it seems that the rent adjustment still consider 1995 as base year instead of 2010.
    I have to set the SAP application as to use 2010 as new base year instead of 1995.
    Would you please forward me with any support.
    Best regards,
    Thank you.
    Tania

    My question has been answered by SAP.

  • Router Console Connect Problem With Mini Usb (1941 Series - Os Win7 64Bit) (SOLVED)

    I can not connect console with mini usb, my router is cisco 1941 series and my os win7 x64 help me please ?
    My problem was solved thanks to this topic;
    https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing#comment-9697916

    Hi,
    Here is how I have managed to enable the communication with the 1941 using the usb A-B cable:
    Download the usb console driver 3.1
    Install the x64 version on your PC (as administrator)
    After the installation was completed:
    Open the Device Manager. There will be a new entry named “CiscoUsbConsoleWindowsDrive”. Expand it and select the “Cisco USB to Serial adaptor”.
    From the drop-down select “Update Driver Software…
    In the “Update Drive Software” dialog select “Browse my computer for driver software”
    In the next window, a driver location should be displayed, if not browse your PC and find the …\Windows_64 folder where you have extracted the 3.1 driver.
    After the driver software was updated, there should be a new entry in the “Ports (COM &LPT)” named “Cisco Serial (COMx)”.
    You can configure the port here:
    Right click on the “Cisco Serial (COMx)” and select “properties” and set the properties to this;
    Bits per second :9600
    Data bits              :8
    Parity                    :None
    Stop bits              :1
    Flow control       :None
    The new COM port should be ready to accept the connection with the router.
    I am using Tera Terms VT, and it is working well with the above driver and settings.
    Should you wont to use the Cisco Configuration Professional (CCP) download the 2.7 version and make shore you have the current Adobe Flush and a current Java installed on you PC.
    Hope this will help.
    AlexS

  • MacBook Pro 11/2007 problem with SSD OCZ Vertex Series 250 GB

    Hi,
    you can read my detailed problem in the OCZ board here:
    http://www.ocztechnologyforum.com/forum/showthread.php?t=64941
    The short version:
    - I bought an OCZ Vertex SSD with 250 GB for my 2 years old MacBook Pro
    - System Details: MacBookPro3,1; Boot Rom: MBP31.0070.B07; CPU: Intel Core 2 Duo 2.4GHz; SMC: 1.18f5
    - The first 250 GB OCZ SSD was an firmware 1.3 and I could install it with Snow Leopard very easy. After 2 days the HDD just disappeared and it also didn't work in an other PC with an internal SATA port and also not with an external disk with sata to FireWire / USB
    - I RMA'ed the disk with OCZ and received a new one with firmware 1.4. I tried to install the computer from scratch and it couldn't write the partition when the SSD was connected to the internal SATA port of the MBP. I used the external SATA to USB and formated the disk with another mac. Then I could install SL from scratch but after some hours the computer began to stall and after the reboot it tried to run fschk and I got the error: "kernel[0]: disk0: I/O error."
    (again: Further details please have a look at the link above)
    - When I boot the system through firewire with the SSD connected through SATA to Firewire it works like a charm but that doesn't make sense (Having a MBP with an external boot drive)
    - I RMA'ed the disk again and last week I received the third one but it had the exact same problem.
    So now OCZ told me to ask apple for a possible solution. Does anybody have an idea what to do?
    I've read two posts about OCZ problems and they wrote about efi 1.7 problem and with efi 1.6 it would work. Didn't try it out yet - should I?
    Thanks for you help!
    --Goetz aka Tankmann

    No ideas?

  • Problems with the Apple ProTraining Series Logix Exp book

    I'm trying to learn this stuff, but the lessons in the Training Series book give instructions to do things in menus that seem not to exist in Logic Express. Is this a function of the book serving both Pro and Express versions and not differentiating the possibilities? Or are the books out of date?
    Specifically, page 127 it tells me to choose Region>Split/Demix> etc, but that split/demix command is not offered.

    The docs that come with LE and the ones available from the Apple site, etc. are definitely screwed up. As I plod slowly through yet another PDF I am constantly finding things that do not work as described in LE and then stumble sideways through the secret undocumented menu trap door that allows the desired function. I refuse to spend money on third party docs. LE is an amazing deal for $300, tack on an additional $100-$200 for information that should come with the program and it becomes less of a deal. I can't speak about the Sitter programs being helpful or not because I haven't used them, a lot of people on this forum seem to dig them, but I'm sorry to hear that it's not helping you. Nonetheless, this is not rocket science and I have faith in everybody's ability to learn LE if they really want to. It's just a program. When you can't figure something out call Apple if you're still covered for free tech help. If not, search this forum and then post a question if you have to. Some posters will give you the RTFM treatment, some will take the time to answer your question. There's nothing wrong with using GB either if that's what works most efficiently for you. Or you can be ambidexterous and use both.

  • Scanning problems with Canon Pixma 5300 series after upgrading to newest Macbook Pro

    Are there drivers available for Canon pixma 5300 series for OS X Mavericks 10.9?
    Scanning with my brand new Macbook pro using  OS X 10.9 just isn't working like it used to with my old white Macbook.
    Does anyone have any suggestions?

    Do you have an MG53xx? If so, then a scanner driver for this model is available from Apple so that you can scan with Image Capture / Preview. So if you open Printers and Scanners and select the MG53xx, you should have two tabs - Print and Scan.
    Canon also has a scanning application called MP Navigator available from their web site. To use this application you will also need to download and install the scanner driver for the MG53xx, which should also be available from the same Canon web site.

  • Start-up problem with my Nokia 6630 series

    Hi everyone! I'm new in the community. Please could anyone help with a problem I have with my 6630. I had just finished charging it and when put it on and tried to access an sms that came in the inbox was not accessible! Then I switched the phone off and later put it on only to get a shocker message which read -" phone start-up failed. Contact the retailer". I contacted the retailer who suggested I that the phone should be switched off again and later switched on. I have done this for the umpteenth time without success! Any one with an idea on how to solve this problem please. I will appreciate your urgent help. Thank you all.

    Dear friend, the start-up problem I had with my nokia 6630 has been solved! I switched off the phone, removed the memory card and powered on. The phone to my surprise came alive. I switched it off again and reinserted the memory card before switching on again and lo and behold, my 6630 was up and kicking again! if anyone should have a similar problem, he of she should try what I did, i hope it works for others in similar situation.
    Cheers.
    so4so

  • Problems with X-FI Titanium PCI-E and my Television "Optical Fiber connection"

    Well I have made my self a multimediacenter, but I don't have any receivers yet so I have decided that I would connect to my television to hear the sound from movies and so on.
    The way i've done it is by connecting a Optical Fiber from the Soundblaster card to my optical input in my Television.
    But first time I've installed Win7 on my Center I could hear the the sound and there was no problems the I've updatede the drivers from the auto update software from creative but now i did not have any sounds.
    Then I reinstalled my system and took the lastest drivers but still no sounds.
    Again I reinstalled and installed the drivers from the Disc bundled with the Soundcard and no sounds.
    I actually don't know how to get the sound back or what I do wrong? - So I hope I can get some help here

    Check if "Play Stereo Mix using Digital Output" is checked in the Console launcher in Settings/Digital IO.

  • Problem with Storage IBM DS Series connector

    Hi,
    I am trying to configure this connector on Grid Control 10gR5, I've put all the ip´s for the controllers as this:
    Name     Value
    Host or Controller IP Address(es) ”10.50.86.26; 10.50.86.27”
    Array WWN / Array Name
    but I got the following message:
    Failed to contact the target to be added. Following errors were received while testing the connection to the target. Update the properties accordingly, try Test Connection for testing the properties before saving.
    TestConnection2 - em_error=Unable to connect to the host/controller
    Both IP´s ping OK, I have already checked the information about the controllers and all seems to be ok.
    Do you experts know something else that I am missing??
    NOTE: I am following the install guide from IBM site.
    Regards.

    when entering the controller ip addresses, do not use " or ;, enter the ip's with a , separating them (no spaces between the ,
    for example: 127.0.0.1,127.0.0.2

  • Hello,good day problem with Cisco aironet 1040 series acces point

    Hello good day to all, how to configure cisco aironet 1040 series using web configuration attaching through patch cord without using the console.
    if possible please send me step by step instruction, any help is gladly appreciated.
    thank you in advance, More power
    mel

    helo good day sir,
    this is the first time i configure this device i am using Cisco aironet 1040 for our wireless using POE for power, and using cisco catalyst 2960 as switch
    i jack the patch cord in and its goes on colored green,
    the thing is how i can configure the aironet 1040  sir?
    waiting for a step by step instruction,
    thank you in advance
    mel

  • Problems with sound on Titanium HD running Windows 8.1 Preview

    Every time I restart my computer the audio settings get reset to default and speakers are turned off as if headphones are plugged in. I have to plug in and unplug headphones to enable speakers.

    This might be a crazy workaround, I know, but it may be worth a shot.
    headphone.JPG
    Make sure you have the Creative Console Launcher installed. In any of the three modes, click the "settings" option, then, under headphones, uncheck the box as seen in the photo above. The software will not auto-engage headphone mode. Retry and see if you have sound now. I did something similar under Vista, although I am not exactly sure why, until the drivers were ironed out.
    You can do the same from the Creative Control Panel, but it is a bit easier to use the Console Launcher and you get EQ functionality, etc.

  • Problems with Westell 7500 Gateway

    Hi guys I have a problem with a westell 7500 series wireless gateway. Having recently upgraded to the gateway from an old 6100 series modem, I am having some issues keeping computers synced with the gateway. Every time I restart my computer connected to the ethernet portion of the gateway, I must re-enter my default gateway on my computer's ipv4 settings. I have dedicated ip's set up for every computer on the network and all of them have problems recognizing the gateway. Even setting the ipv4 to autodetect the settings, it locks me out of the internet saying it is a public network. I have verified all my settings in the gateway and it is set up for private connections only. Any help that someone could give would be appreciated. Thanks

    When you are online, is an IP Address on computer the same IP Address that is on http://www.whatismyip.com/ ?
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Maybe you are looking for