Problems with Xml for mixed frame rate clips in 23.98 sequence

When an XML from an fcpx sequence which has mixed frame rate clips in 23.98 timeline is put through X2Pro the resulting AAF is incorrect as the non 23.98 clips are out of sync and have the wrong frame conversion applied. The same thing happens with the XML through Xto7 - the fcpxml appears not to be handling the frame rate conversion correctly in the XML process.
Anyone else had this or know of a workaround ( other than converting all media to 23.98 before editing obviously!)

What happened to us is that the DP shot all the footage in 59.94 mode. Some at 60p, and some at 24p WITHOUT pulldown. We tried capturing it again as 24p at 23.98 but it wouldn't come in that way. So we had to live with it at 59.94. And yes, we couldn't slip it on the timeline, we had to match back to the master clip and choose different in points until it came in right.
It was a horrible mess and we won't be hiring that DP again. I hope that re-capturing does it for you, it didn't for us.
Good Luck.
Shane

Similar Messages

Working with slow motion/mixed frame rates

Hello!
Just wondering what the best solution is for slow motion. The majority of my footage is shot on DSLRs in 1080 at 29.97fps, so this is my sequence and project setting, however, I also have some slow motion clips shot in 1080 at 96fps. I have tried selecting the slow motion clips to Modify, Interpret Footage, Assume this frame rate but for some reason it's not slowing down in the playback and the metadata is still saying the clip is shot in 29.97fps. Am I forgetting something?
Thanks in advance!

Hi,
I have the same issue, I have tried with CS6 and CC same issue.
even with the sony plugin.
come on Adobe

Mixed frame rate video clips on the same Blu-ray disc

Before I go into the detail, this actually isn’t an issue for me, but more of a finding the answer to a different question, so please bear with me.
To explain: I live in the UK, and I’m forever challenged by the different native video frame rates imposed by the PAL and NTSC standards. Every consumer camcorder I’ve ever seen only produces HD output (1920 x 1080) at either 50 fields/second interlaced, or 25 (sometimes 50) frames/second progressive. Some action cameras (Go Pro) I possess allow me to record at 30fps progressive, in full HD, which for fast movement is simply better. This in itself is not really a problem, but I use other software (all USA sourced) for video production whose best results are only visible when the finished HD output is 1080/60i.
Having mixed frame rate video is a real problem for the DVD standard, but no so much for Blu-ray. Indeed Adobe Encore neatly gets around this problem, so I can actually author a Blu-ray disc which contains full HD video clips that may be either 50i or 60i. Both types of video exist on the same disc, and when played back through a Blu-ray player/TV combination, the resultant video clips are shown correctly. Player and TV switch seamlessly to the correct setting to handle the video content. So, I have a solution to my problem, but at the same time, a question I can’t find an answer to, which is this:
Does the Blu-ray specification allow video clips of different native frame rates (i.e. 25fps and 30fps) assuming the resolution is the same, to co-exist on the same Blu-ray disc as a supported feature?
It works, but I can’t find one shred of information that says what I’m doing is supported.
Comments are most welcome.
Regards,
Steve

Stan Jones wrote:
Encore requires you to specify the project type as PAL or NTSC (whether you start it as Bluray or DVD), and does not allow you to change it later. Also, if you try to create a transcode type for PAL in an NTSC project you cannot get to the 25 fps setting (and therefore, I think, cannot do it).
But if you import a Bluray legal 25i file to an NTSC project, it is happily added.
DVD player conventional wisdom is that PAL players handle NTSC disks, but NTSC players do not generally handle PAL disks. I never quite understood why the TVs were not more of the issue. Do Bluray players even differentiate between PAL and NTSC?
Even if the player will handle PAL, the TV may well not do so - so there is more going on.
NTSC uses (generally) 60Hz systems whereas PAL is 50Hz hence the problem.
Do not try to mix standards as it will not be allowed - however, multiple frame rates are allowed as long as they are within spec for that TV standard.
They are best avoided though - otherwise you run a very real chance of serious asset truncation as the TV display switches between different resolutions & frame rates.

Mixing Frame Rates and Creating Old Film Look?

Hello, I'm working with AVCHD footage which is 59.94 fps and have made my sequence settings at this frame rate. I've dragged in a few clips 23.98fps, 24fps, 25fps and 29.97fps, I'm attempting to give it a old film look so was going to render out at 14 fps as this is what 8mm is filmed at, I've never worked with mixed rates so any advice as to whether this is going to work? Should I have my sequence setting at my highest frame rate and the majority of the video is 59.94fps? would it work exporting at 14 or 16 fps?

I've never worked with mixed frame rates, but for the old film look, I like the Posterize Time effect set to 18 (one of the two standards for Super 8 that my camera had) and use Magic Bullet Misfire.

Mixing frame rates in project?

I know this has been discussed a bit on other posts. But I couldn't quite find the angle/issue I'm working with. It's mainly a 24fps film, but I have to use 29.97fps archival material. The end output is 24fps. If I just edit the different frame rate clips as is on the timeline and output ... will my 29.97 be converted 'smoothly' into the final exported movie? Or will I have stuttering issues? And is there any advantage in converting all my 29.97fps to 24fps (individually) and then re-inserting them back into the film?
In a couple of shots I can see what looks like a slight fluttering in a subject moving back and forth horizontally (not particularly fast either).
I just attempted to do a test, to convert the 29.97 to 23.98. A puzzle: there seems no way to export out the clip at a different frame rate (if it's a 29.97 on a 29.97 timeline). I'm stuck with the 29.97.
If I try to modify the project with the 29.97 clip in it already - the modification won't allow me any choices beyond the 29.97.
If I create a NEW project at 23.98 fps, and then drop the 29.97 clip into it ... the clip CHANGES the project back to 29.97, and I'm still stuck with the same problem.
If I don't want to go to another app like Compressor, what might be the trick here?

I converted a clip from 29.97 to 23.98 using Compressor. I have to say, it looks better than what I'm getting from the 'mixed frame-rate' timeline in FCPX. Am I imagining this do you think? Smoother.

FCPX Mixed Frame Rates? 30fps AND 24fps in same project?

Just got done doing a multicam shoot for a large event where I had multiple people helping me out. We all shot at 1080p on a variety of Canon DSLR cameras and a Go Pro and a MiniDV Consumer Cam. I thought everyone got the memo to shoot at 30fps, and most everyone did, however one of my Canon cameras shot at 24fps. I know I've heard in the past mixing frame rates can cause issue in other programs, and I know FCPX can handle multiple frame rates, but what sort of trouble am I in for if I want to use footage from cameras using 30fps and a camera using 24fps in the same final product? Is the 24fps stuff going to choppy or weird if I use it in a 30fps sequence/project? My final deliverable at this point can be 30fps or 24fps, it is not stated and I want to make sure evrything looks good so what should I set my project settings for? Any ideas?

Ah - no - conforming simply resets the frame rate information. You should re-conform it back to 29.97...
Here's what I think you'll need to do. If the majority of your material is at 23.98, make your main sequence that. Cut everything at that 23.98 - you'll have to render any 29.97 material then, but when you've locked picture, look at the sections with 29.97 stuff and if it looks okay, just skip to making the DVD. If it doesn't, you'll have to insert a pulldown by exporting your sequence then bringing the quicktime back in, adding a pulldown with Shake ($500) or Nattress frame rate converter ($99) - OR try this - edit it to tape and a pulldown will be inserted, then recapture.
Once you have a 29.97 version of your clip, cut it into a 29.97 sequence and re-cut in the 29.97 material (now you won't need to render). Then export for your DVD.
Now - after all this, are you sure that your 30fps material is NOT 29.97 with a pulldown? Did you check this yet?
Patrick

How do I output the smoothest video when changing or mixing frame rates from the original footage?

I have been experimenting with various Media Encoder settings, and wondered if there was anything else I can try to get the smoothest video output possible, especially when changing frame rate and possibly resolution. For clarification, let me start from the beginning and explain what I'm doing and what I've tried so far. I'll try to be as brief as possible, but if I do go into too much detail, I apologize.
My original footage is AVCHD 1080p - 60fps. (my camera only does 60fps...specifically 59.94fps) We're not talking interlaced video here, I'm staying away from that. This is definitely full frame, progressive video at 60 frames (not fields) per second. My output will ultimately be for the web. I have been keeping my output codec (H.264) and bit-rate (VBR 2-pass, relatively high-bitrate) consistent, and have been trying numerous output options and even sequence settings to see what would yield the best results. I am using Premiere Pro CS5.5 along with Media Encoder. Here's what I've done and the results I've observed:
1. I created a sequence with 1080p - 59.94fps settings to match my original footage. I then output both 1080p and 720p versions at 59.94fps, and at 29.97fps. The 59.94fps output files looked absolutely great, as would be expected. Extremely smooth. The 29.97fps output files were generally smooth, but not near as smooth as the 59.94fps. This is expected since it's half the frame rate as my original footage. However, my question is this: What exactly is Media Encoder doing when "down converting" from 60p to 30p? From a technical stand point, is it dropping every other frame? I'm just curious to understand exactly what it does. I tried the Frame Blending option as well, and that only yielded a bit more blur to the images which wasn't desirable for any of the output files.
2. Just to see what would happen, I created a sequence with 1080p - 29.97 settings. I then output both 1080p and 720p versions at 29.97fps. The video was much more choppy in these cases, even with Frame Blending on. Now, I know not matching my sequence settings with my original media isn't ideal, but I again just want to understand why this yields less smooth video than the 29.97fps options above. Why does cutting the sequence settings frame rate in half from the original, then outputting the same frame rate as the sequence yield video that is not as smooth?
3. Next, I wanted to try mixing frame rates to see how Premiere and Media Encoder handled the footage and output files. Premiere handled it great, no issues there. However, I had some interesting things happen when I output the files. Here's what I did: I created a sequence with 1080p - 59.94fps to match my original footage. Then I took the same exact footage that was in my sequence, copied it in my project panel and interpreted it at both 23.976 and 29.97 fps, yielding slow motion video. The slow motion video looked great in Premiere, so I went ahead and just added it to my sequences, along with the original 59.94 footage. I also created separate sequences for the 29.97 and 23.976 footage respectively, each with matching sequence settings, then added a nested sequence to another original footage sequence (with 59.94fps sequence settings) to see which yielded the best results. Basically, I'm trying to output 59.94fps that match my original footage, but also throw in some slow motion footage at different framerates. I'll explain my results in a moment as they are a bit convoluted, however, here is my question: When mixing frame rates and trying to output the smoothest video, am I going about this the right way? I would assume you would use your sequence settings that match the original footage (which is what the majority of the footage will be), then bring in a nested sequence for the slow motion (as oppose to just dropping the slow motion video directly into my main sequence), and then output to the same frame rate of the majority of the footage, in this case 59.94fps. Is there a better workflow for this?
The results to #3 above were as follows. Initially, it looked like it didn't matter if I nested the slow motion sequence into my main sequence, or simply dropped the actual slow motion video into my original 59.94fps sequence. It seemed to produce smooth results either way. Frame Blending blurred the video a bit, but didn't seem to make much difference, and quite honestly I like the footage without Frame Blending in general. However, when I closed down Premiere, and opened the output files later (opening in Quicktime), the footage looked choppy. In fact, it would go from choppy to smooth and back, almost like it had an irregular cadence (don't know if I'm using "cadence" in the right context here). I would then open up Premiere again, import the output footage into my project panel, and play the footage in Premiere, and it would play back smooth again. Is this a Quicktime issue? I was playing 1080p 59.94fps files when this happened, so maybe it's just because it's a large file. Doesn't seem to have issues with the 720p files I created. But it sure threw me off with my testing because I then started second guessing the settings I was using. My iMac is the latest 2011 model with plenty of RAM, so I wouldn't think it's the computer. Thoughts?
4. Next, I noticed on ALL my output files (again, using the H.264 codec from Media Encoder) that the color of my video seemed to flatten quite a bit. It seems that the original footage has more contrast and saturation than the output files. I figured maybe this was just how it was, but when I re-imported the output files back into Premiere, they looked IDENTICAL to the original footage. And in Media Encoder's Source/Output windows, I don't see any difference there either. Is Quicktime again the culprit here, doing some odd things to the color of my videos?
5. Regarding Frame Blending, when is the best situation to enable this option in Media Encoder? I've read it is when mixing frame rates, but I honestly didn't see too much of a change except for a bit more blur, which I didn't care for.
6. Lastly, my conclusion is that 60fps yields the smoothest video, which is an obvious conclusion. However, I know that 60fps isn't the best or easiet frame rate for web delivery. It seems 30p is more the standard. Are there any integrated web players that would play 60fps? Can you get 60fps video on YouTube/Vimeo? If yes to any of these questions, can they do 720p and 1080p at 60fps?
Those are all my questions. I hope I am clear enough without being overly wordy and hopefully I didn't put too many questions into one post. Thanks in advance for any insight, I really appreciate it.

Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
thanks!

Confusion about mixing frame rates......

what are these guys talking ....does this happen automatically that fcpx adjusts variable frame rates according to the project settings..?
https://discussions.apple.com/thread/4505699
because it did not happen with me in a 23.98 timeline the clips with 25 fps did not sync......

Mudh Mark wrote:
in a 23.98 timeline the clips with 25 fps did not sync......
Not sure what you mean by sync. You mean the audio is out of sync?
I looked at the thread you linked to. The software should be able to handle mixed frame rates quite well.
Russ

Cutting mixed frame rate (fps)?? -formerly: compatibilty of HDX900 & FCP? ?

Hi there,
I didn't hear much response from this group about this previous topic (thanks loyed or is it, scott?)... but I have a related question.
Has anyone cut a piece with mixed frame (vid) rate. For example, we are cutting some video shot at both 23.98 and 29.97. The sequence settings for 'editing time base' allows only one option. So I guess I could set 2 sequences and put one into the other. I don't want to nest though. Anyone deal with this?
I'm researching which is better for our project, either FCP or Avid. I want to be able to cut HD (shot with the HDX) in real time with mixed frame rate. Right now, I know Avid can handle the mixed frame rate. I have heard that with Avid Media Composer (software only), you may have to render often if your working off-line.
On the other hand, Apple says they don't officially support this camera's format. BUT I found someone who is using the one I use for the HVX, DVCPRO HD 720p and it is working for them (again thanks Scott).
I can't test either out yet. I don't have the footage, but will be working on a time crunch.
Any of your thought will be appreciated.
Best to you guys,
Sandhya
--forwarded note below from original post----
sandhya <[email protected]> wrote:
I am trying to determine the compatibility of Final Cut Pro and Panasonic's AJ-HDX900. We will shoot HD 720p mixed frame rate.

I know you said you don't want to nest sequences, which is a good thing, because (as of now) you can't nest sequences with different frame rates.
Capture the 23.98 footage without removing the pulldown, and you'll have the 23.98 look in a 29.97 file.

Problem with XML on Linux

hi everybody,
I've a big problem with XML on Linux, in details I see my program stopping on Linux at the instruction
XMLReader xr = XMLReaderFactory.createXMLReader("org.apache.crimson.parser.XMLReaderImpl");
and it's strange because on Windows it runs and there aren't problems about permissions on files, does anyone knows what to do?
thanks in advance!
Stefano

What happens on that line? I'm assuming you get some kind of error or exception.
Make sure the JAR file for Crimson is in your classpath.

Problem with XML in APEX ORA-06502

i, I have a problem with XML generation, I developed an application in APEX, and in a html page I have this process:
declare
l_XML varchar2(32767);
begin
select xmlElement
"iva",
xmlElement("numeroRuc",J.RUC),
xmlElement("razonSocial", J.RAZON_SOCIAL),
xmlElement("idRepre", J.ID_REPRE),
xmlElement("rucContador", J.RUC_CONTADOR),
xmlElement("anio", J.ANIO),
xmlElement("mes", J.MES),
xmlElement
"compras",
select xmlAgg
xmlElement
"detalleCompra",
--xmlAttributes(K.ID_COMPRA as "COMPRA"),
xmlForest
K.COD_SUSTENTO as "codSustento",
K.TPLD_PROV as "tpldProv",
K.ID_PROV as "idProv",
K.TIPO_COMPROBANTE as "tipoComprobante",
to_char(K.FECHA_REGISTRO, 'DD/MM/YYYY') as "fechaRegistro",
K.ESTABLECIMIENTO as "establecimiento",
K.PUNTO_EMISION as "puntoEmision",
K.SECUENCIAL as "secuencial",
to_char(K.FECHA_EMISION, 'DD/MM/YYYY') as "fechaEmision",
K.AUTORIZACION as "autorizacion",
to_char(K.BASE_NO_GRA_IVA, 9999999999.99) as "baseNoGraIva",
to_char(K.BASE_IMPONIBLE, 9999999999.99) as "baseImponible",
to_char(K.BASE_IMP_GRAV, 9999999999.99) as "baseImpGrav",
to_char(K.MONTO_ICE, 9999999999.99) as "montoIce",
to_char(K.MONTO_IVA, 9999999999.99) as "montoIva",
to_char(K.VALOR_RET_BIENES, 9999999999.99) as "valorRetBienes",
to_char(K.VALOR_RET_SERVICIOS, 9999999999.99) as "valorRetServicios",
to_char(K.VALOR_RET_SERV_100, 9999999999.99) as "valorRetServ100"
xmlElement
"air",
select xmlAgg
xmlElement
"detalleAir",
xmlForest
P.COD_RET_AIR as "codRetAir",
to_char(P.BASE_IMP_AIR, 9999999999.99) as "baseImpAir",
to_char(P.PORCENTAJE_AIR, 999.99) as "porcentajeAir",
to_char(P.VAL_RET_AIR, 9999999999.99) as "valRetAir"
from ANEXO_COMPRAS P
where P.ID_COMPRA = K.ID_COMPRA
AND P.ID_INFORMANTE_XML = K.ID_INFORMANTE_XML
xmlElement("estabRetencion1", K.ESTAB_RETENCION_1),
xmlElement("ptoEmiRetencion1", K.PTO_EMI_RETENCION_1),
xmlElement("secRetencion1", K.SEC_RETENCION_1),
xmlElement("autRetencion1", K.AUT_RETENCION_1),
xmlElement("fechaEmiRet1", to_char(K.FECHA_EMI_RET_1,'DD/MM/YYYY')),
xmlElement("docModificado", K.DOC_MODIFICADO),
xmlElement("estabModificado", K.ESTAB_MODIFICADO),
xmlElement("ptoEmiModificado", K.PTO_EMI_MODIFICADO),
xmlElement("secModificado", K.SEC_MODIFICADO),
xmlElement("autModificado", K.AUT_MODIFICADO)
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
AND K.ID BETWEEN 1 AND 25
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
declare
l_XML CLOB;
begin
--Oculta XML
sys.htp.init;
wwv_flow.g_page_text_generated := true;
wwv_flow.g_unrecoverable_error := true;
--select XML
select xmlElement
from SRI_COMPRAS K
WHERE K.ID IS NOT NULL
AND K.ID_INFORMANTE_XML = J.ID_INFORMANTE
).getClobVal()
into l_XML
from ANEXO_INFORMANTE J
where J.ID_INFORMANTE =:P3_MES
and J.RUC =:P3_ID_RUC
and J.ANIO =:P3_ANIO
and J.MES =:P3_MES;
--HTML
sys.owa_util.mime_header('text/xml',FALSE);
sys.htp.p('Content-Length: ' || length(l_XML));
sys.owa_util.http_header_close;
sys.htp.print(l_XML);
end;
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+

JohannaCevallos07 wrote:
Now my table has more than 900 rows and only when I specifically selected 25 rows of the table "ANEXO_COMPRAS" in the where ( AND K.ID BETWEEN 1 AND 25) the XML is generated.+
I think that the problem may be the data type declared "varchar2", but I was trying with the data type "CLOB" and the error is the same.+
The error generated is ORA-06502: PL/SQL: numeric or value error+_
Please I need your help. I don`t know how to resolve this problem, how to use the data type "CLOB" for the XML can be generate+The likeliest explanation for this is that length of the XML exceeds 32K, which is the maximum size that <tt>htp.p</tt> can output. A CLOB can store much more than this, so it's necessary to buffer the output as shown in +{message:id=4497571}+
Help us to help you. When you have a problem include as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
And always post code wrapped in <tt>\...\</tt> tags, as described in the FAQ.
Thanks

Stacked 100% bar chart - Problem with datatips for zero value data points

I have a stacked 100% bar chart that shows datatips in Flex 4.   However, I don't want it to show datatips for
data points with zero values.   Flex 4 shows the datatip for a zero value data point on the left side of a bar if the data point is not the first in the series.
Here's the code that illustrates this problem.    Of particular concern is the July bar.    Because of the zero value data point problem, it's not possible to see the datatip for "aaa".
Any ideas on how we can hide/remove the datatips for zero value data points ?        Thanks.
<?xml version="1.0"?>
<s:Application
xmlns:fx="
http://ns.adobe.com/mxml/2009"xmlns:mx="
library://ns.adobe.com/flex/mx"xmlns:s="
library://ns.adobe.com/flex/spark"creationComplete="initApp()"
height="
1050" width="600">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script><![CDATA[
import mx.collections.ArrayCollection;[
Bindable]
private var yearlyData:ArrayCollection = new ArrayCollection([{month:
"Aug", a:1, b:10, c:1, d:10, e:0},{month:
"July", a:1, b:10, c:10, d:10, e:0},{month:
"June", a:10, b:10, c:10, d:10, e:0},{month:
"May", a:10, b:10, c:10, d:0, e:10},{month:
"April", a:10, b:10, c:0, d:10, e:10},{month:
"March", a:10, b:0, c:10, d:10, e:10},{month:
"February", a:0, b:10, c:10, d:10, e:10},{month:
"January", a:10, b:10, c:10, d:10, e:10}]);
private function initApp():void {}
]]>
</fx:Script>
<s:Panel title="Stacked Bar Chart - Problems with DataTips for Zero Value Items" id="panel1">
<s:layout>
<s:HorizontalLayout/>
</s:layout>
<mx:BarChart id="myChart" type="stacked"dataProvider="
{yearlyData}" showDataTips="true">
<mx:verticalAxis>
<mx:CategoryAxis categoryField="month"/>
</mx:verticalAxis>
<mx:series>
<mx:BarSeries
xField="a"displayName="
aaa"/>
<mx:BarSeries
xField="b"displayName="
bbb"/>
<mx:BarSeries
xField="c"displayName="
ccc"/>
<mx:BarSeries
xField="d"displayName="
ddd"/>
<mx:BarSeries
xField="e"displayName="
eee"/>
</mx:series>
</mx:BarChart>
<mx:Legend dataProvider="{myChart}"/>
</s:Panel>
<s:RichText width="700">
<s:br></s:br>
<s:p fontWeight="bold">The problem:</s:p>
<s:p>Datatips for zero value data points appear on left side of bar (if data point is not the first point in series).</s:p>
<s:br></s:br>
<s:p fontWeight="bold">For example:</s:p>
<s:p>1) For "June", eee = 0, mouse over the left side of the bar to see a datatip for "eee". Not good.</s:p>
<s:br></s:br>
<s:p>2) For "July", eee = 0 and aaa = 1, can't see the datatip for "aaa", instead "eee" shows. Real bad.</s:p>
<s:br></s:br>
<s:p>3) For "Feb", aaa = 0, datatip for "aaa" (first point) does not show. This is good.</s:p>
<s:br></s:br>
<s:p>4) For "Mar", bbb = 0, datatip for "bbb" shows on the left side of the bar. Not good.</s:p>
<s:br></s:br>
<s:p fontWeight="bold">Challenge:</s:p>
<s:p>How can we hide/remove datatips for zero value data points?</s:p>
<s:br></s:br>
</s:RichText></s:Application>

FYI.
Still have the issue after upgrading to the latest Flex Builder 4.0.1 with SDK 4.1.0 build 16076.
Posted this as a bug in the Adobe Flex Bug and Issue Management system.     JIRA
http://bugs.adobe.com/jira/browse/FLEXDMV-2478
Which is a clone of a similar issue with Flex 3 ...
http://bugs.adobe.com/jira/browse/FLEXDMV-1984

Problem with graphs on repeating frames

Is it possible to use graphs showing correct data within repeating frames?
We experienced problems with graphs within repeating frames, each occurrence of a graph shows the same picture (using data that corresponds to the first frame).
Tnx in advance.

Sounds like the source data for the Graph is the wrong Group.
Dave

I am facing a new problem with xml schema, plz help me

Hi @,
I am facing a problem with xml schema validation. Below is my code.
public void initialize(String cfgFileName) {
try {
try {
DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
parser.setFeature( "http://xml.org/sax/features/validation",true);
parser.setFeature( "http://xml.org/sax/features/namespaces",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
Document document = parser.parse(cfgFileName);
System.out.println("Vijay .. code .. damar\n");
}catch (org.xml.sax.SAXParseException spe) {
} catch (org.xml.sax.SAXNotRecognizedException ex ){
} catch (org.xml.sax.SAXNotSupportedException ex ){
} catch (org.xml.sax.SAXException se) {
if (se.getException() != null)
se.getException().printStackTrace(System.err);
else
se.printStackTrace(System.err);
}catch (Exception e) {
System.out.println("Caught unknown exception : \n");
e.printStackTrace(System.err);
System.out.println("Vijay .. code .. success\n");
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
//docBuilder.setErrorHandler(myErrorHandler);
cfg = docBuilder.parse(new File(cfgFileName));
cfg .getDocumentElement ().normalize ();
} catch (Exception e) {
e.printStackTrace();
In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
For clear understanding I am printing one statement before parsing and after parsing.
SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
Here what is happening means, It is validating correctly and showing error :
[Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
Vijay .. code .. damar
Vijay .. code .. success
Here it is showing error and still continueing not catching.
Plz give solution for this.
Thanks
vijay K

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Mixing frame rates

Hi all. I will be doing a 3 or 4 camera project soon. I have two Canon tapeless AVCHD cameras, a Vixia HFM43 and an HFG10. I'm going to borrow two more cameras but don't know what kind they are yet. I was thinking of shooting the HFM43 in Canon's FXP mode with a 30 frame rate, and the HFG10 also in FXP mode but with a true 24 fps progressive, a frame rate that the other Canon is not capable of. I wanted the better frame rate because I am sometimes going to crop and zoom in on parts of the video taken with that camera, and the higher quality video it takes seems to make this possible without making the video too grainy. I have since googled a bit on mixing frame rates like this in one project, and people generally warn against it. Is this true? Is it better to stick to one frame rate?

Calm down, calm down . . . everything is OK.
Canon's 60i and 30p are both the same frame rate . . . 30fps. (Ignore the 29.97 as it is the daft American system and can be regarded as 30fps)
It's just that the 60i has 2 interlaced fields (don't worry about it!) per frame whereas 30p has 2 identical fields (equivalent to one field) per frame.
If you are interested you can read about interlaced and progressive frames in Wikipedia!
Suffice it to reiterate, they are both 30fps.
It would make sense in future to have all cameras set to the same although it shouldn't make any difference.
NOTE: Over the past few years a number of cameras have included a "60p" setting (note the "p").
This is 60fps and shouldn't be mixed with 60i or 30p

Problems with Xml for mixed frame rate clips in 23.98 sequence

Similar Messages

Maybe you are looking for