Problems with Zen Touch on Windows Vista (64-B

When I connect my Zen Touch to the PC Vista can't find drivers so it tries to install the MTP-Driver but the classinstallationprogram have declined the installation.
http://img80.imageshack.us/img80/8555/errorhx5.jpg (sorry, it's in german)
How can I install a driver for the Zen Touch?

Noone with the same problem and an idea how to install the driver?

Similar Messages

Creative Zen Touch 20GB - Windows Vista

(Creative Zen Touch 20GB - Windows Vista6 Hi folks,
My old computer running XP recently gave up on me and I now have a new computer using Vista.
I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
Any help much appreciated.
Thanks,
Pob

Pob wrote:
Hi folks,
My old computer running XP recently gave up on me and I now have a new computer using Vista.
I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
Any help much appreciated.
Thanks,
Pob
This should get you going? http://mrinternet.wordpress.com/2007...ether-finally/

Problems With Zen Touch Turn

After just recently purchasing a Zen Touch in December 2005, I already have problems with it.
I have never dropped it or hit it. I plugged it in to re-charge one day after using it and when it was done charging I turned it on, used it for 5 minutes then set it down. The next morning I went to turn it on to use it, and it wouldn't turn on. The blue light at the side on the power button was on, but the screen just wouldn't show up. Now the blue light won't turn off. I have read about these problems with Zen Micro freezing up and read about Zen Touch freezing up back in 2004 when it was released. I have phoned the number but couldn't seem to get through. Should I consider taking it in? Or is there an easier way?

Have you tried resetting it's Connect to the mains adapter and press the tiny recessed button on the side of the player. Don't use anything sharp to press it, a bent paper clip is best.

Problem with Zen Touch & Mediapla

Hi there!
I've recently bought the Zen Touch and I am still quite happy with it. From Windows Mediaplayer I've already put around 0GB of music on it. But since this morning I've got a serious problem. When I start Mediaplayer to play some music it works fine, but when I plug in the Zen Touch, the programm crashes. This means that I can't put on new or delete old music from the Zen Touch.
Does anybody know a solution?
Thanx,
Stefan

Probably worth trying a disk cleanup from rescue mode.
If that doesn't help, is other software like Creative MediaSource working?

Problem with Zen Touch Playlists Resol

With the help of Jean-Francois, a colleague of my husband's, I figured out the problem I was having with putting playlists on my Zen Touch MP3 player in the order in which I wanted them to play, and it's a simple solution but one I thought I'd pass on to others in case anyone else runs into this problem:
Simply put, when you make playlists, have your MP3 player docked with your computer, and make sure that in the MediaSource Organizer program, the player is highlighted (well, it's a gray bar) when you start making the playlist. Then start with "new playlist," give it a name and enter the songs you want in the order you want as usual. What you're doing is actually building the playlist in the player rather than in the MediaSource Organizer, and the playlist will be created as you want it to be.
If, like me, you then want to transfer the playlist to your computer program, you'll find that it will turn up on the 'puter in alphabetical order (the problem I was having with the Zen Touch player); but it's a simple matter to click'n'drag the songs around until they're in the order you want - and, as far as I can tell, they will stay in that order once you've moved them.
So, problem solved - would have been nice if the User's Guide specifically said "you must dock your Zen Touch player to the computer while making playlists if you want the playlist to be in the proper order on your player," but we figured it out.....

lang_mui85 wrote:
Ok, so i plugged my zen touch into my pc yesterday to transfer files (rmvb) to my lappy, but it wouldn't work. so i updated all the software and now the pc recognizes the zen, but the programs (nomad, organizer) won't recognize it. so i used my laptop and it works fine except that it still won't transfer rmvb files. oh, it used to be able to transfer my rmvb files before this. i'm using windows xp. so i'm assuming that this is not a problem with my lappy or my pc... and it's a problem with the actual mp3. oh by the way, besides trying to fix the rmvb file transfer,
Data files are often a problem with the player. It sounds like you've tried pretty much everything you can short of a disk cleanup from rescue mode.
Failing this you could try formatting the player in case something has become corrupted. Of course make sure to backup the player first.
Also there's lots of advice via the "PC connection problems with your player" link in the FAQ post.

Problems with Zen Touch - Need He

I bought a Zen Touch about 5 months ago and so far its been great! (apart from the occasional freezing) but all in all I'm quite happy with my choice of MP3 player. Until recently. A problem arose when i deleted all my old music off of the Zen and burned in some new music - It has an error message saying "Add Music from Library" - And i press menu button and it freezes and i can't switch it off.... The oddest thing is that my pc shows that all the tunes are on it but for some reason i can't acess it. I tried everything; i reburned software, reburned the tunes back on, deleted them, waited for the Zen to run out of battery... I'm really missing my Zen at the mo and any help would be GREATLY appreciated....thanx
Reuben Kenney, London

Duplicate question.

Problems with driver in microsoft windows vista

I speak of Brazil, I have a smarthfone BlackBerry 8100 and a Dell Inspiron 1525 notebook with Windows Vista 32-bit, Service Pack 1. I'm having problems with "Bluetooth peripheral device" and the solution of the problem indicates to contact with RIM to find and properly install the driver of that device. How did attempt to resolve the download of the BlackBerry Desktop Software v4.7, but said, I want to get a resolution to the problem. No more, thank you now.

> What can we do?
Let your Cisco rep know that this is an important feature. The word I have is that stateful firewall is not in the Vista feature set for Cisco.
The readme for the Cisco VPN client 5.0 bears this out:
Known Issues:
CSCsh02887 Vista: Stateful firewall does not start.
CSCse44616 Vista: VPN Client should not install Zone Lab Firewall on Vista platform
CSCsf07334 Vista: Stateful Firewall Not Supported on Vista VPN Client

Activation problem with Acrobat V7 on Windows Vista

I recently purchased a new computer with Windows Vista Home Edition pre-loaded. I then installed my Acrobat Version 7 software which had been installed and operating trouble-free on my old Windows XP machine. Everything seemed to install OK but then when I tried to use the software an automatic pop-up appeared saying I could not activate the product because I was not logged on as the Administrator. When I check my user identity in Vista I am logged on as the Administrator and I am the only user.
When I then tried to activate by phone the Adobe individual was clueless as to what the problem was except to say there are compatibility problems with V7 & Vista and suggesting I hand over another $99 to upgrade to V9 - something I am not enthused about since I already paid $299 only 2 years ago.
Suggestions?

Vista requires AA8.1 at a minimum. I think that a few have gotten AA7 to work, but it is not supported by Adobe on VISTA. I know that is not good news, but it may be that you will be unsuccessful. At the very least, expect to have to print to file and open distiller to complete the conversion. I think that AcroTray is one of the major problems with the use on VISTA.
Hopefully someone might stop by that has successfully gotten over the registration problem you are having, and possibly gotten AA7 to work in some sense on VISTA, but do not be surprised if there are no takers. Good luck.

Fast forward problems with Zen Touch (1.01.03 AND PlayForSu

Device: Zen Touch
Firmware: .0.03
Some files cause fast forward problems. Suppose I fast forward to the end of the song. Then I reach the - 00:00.00 marker. HOWEVER, the song goes on and on. It doesn't stop, even if it should (these files aren't corrupt, they work properly on my pc). For e.g. this file causes problems: http://www.hollywoodsaloon.com/podcast/THS-ep9.mp3 and this file http://meandawg.com/audio/MDTop5_0002.mp3.
Anyone know if this is a common problem, and can I fix this by installing the playforsure firmware?Message Edited by Nicos on 07-27-200703:42 AM
Message Edited by Nicos on 07-27-200703:43 AM
Message Edited by Nicos on 07-27-200703:43 AM
Message Edited by Nicos on 07-27-200707:22 AM

I just upgraded the firmware and it didn't help =(
Is there anyone who has the same problem? Maybe someone of you can download these files and try to ffwd to the end with a Zen Touch.Message Edited by Nicos on 07-27-200707:44 AM
Message Edited by Nicos on 07-27-200708:00 AM

Problems with Zen Touch, Player doesn't conn

HiI'm working with Microsoft XP. I've just installed the software which came with my creative zen touch., without any problems. When I plug the player into my computer, it seems to connect as the message appears: new device, creative zen touch player. When I open then the Media Source Organizer it starts updating the music library, but after a few seconds, the following error message appears: player isn't connect. Does anyone knows the problem and how to solve it'sMany thanksCornelia

Go into Device Manger. Look for Zen Touch under USB devices. If it has an exclamation point next to it, there is something wrong with the drivers. Right click on it and then click on "driver", then update the driver.
I had a similar problem with my computer telling me the player was not connected. It turned out that no drivers were installed.

Problems with airport extreme and windows vista

Hi, I have windows vista and I'm having problems conecting it to air port extreme. The only way I can make airport extreme work is to disconect and reconect the powercord and then my computer reconizes it.
Any sugestions would be helpful.

I just got off the HP "chat" technical assistance about my HP DV6500z doing this same thing. At least for my model there is an October BIOS update. She had me re-install the Broadcom drivers and run the BIOS update. Now the whole computer runs faster in addition to connecting wirelessly! Not only that, I can use the "closed" network feature through the Airport Utility to hide my network as I did in the past and the PC finds it! I guess through all of the very testy notes on HP's discussion board they finally came through (well, at least on this model). My model has the AMD processor so if yours is Intel it may not be the same. I recommend going to their TA chat line or type in your model on their Software & Driver page to see if there is a recent revision on your models BIOS. The one I downloaded was dated 10-2007.

Having connection problems with Zen Touch...Please h

I haven't used my Touch in a while but I went to install everything last night on my XP machine and when I load MediaSource it says there is no player attached. Windows recognizes the player is there and I can see all the songs in Explorer and I even did the firmware upgrade and that worked. I also tried re-installing MediaSource and it knows the player is there during installation (cuz otherwise it would give an error) but once it is installed, the program can't find it.
Does anyone have any ideas?
Thanks

kingvudu wrote:Thanks for the help. I'm trying to use MediaSource Organizer, as that seems to be the best way to recover the data without installing a new program/driver to my PC (as I said, my computer is really close to dying and I'm afraid if I have to restart it won't turn back on).Unfortunately, I can't seem to figure out how to get MediaSource to show data files. All I can see are media files. I figured out how to show all files on My Computer menu but not for the Zen Touch menu. How do I see the data files?
MediaSource can't show data files. I believe only PlayCenter, Nomad Explorer and Notmad can do this (and also Creative File Manager, which is essentially a non-music version of Nomad Explorer).
psp wrote:
try a download or try media player 0
This can't download data files, only audio (if it can even do that, from the player to the PC).

Problems with Zen Touch and MediaSou

I have a Zen Touch and I'm trying to figure out how to easily tranfer songs onto a PC. I've downloaded the latest version of MediaSource and drivers, but it doesn't recognize that the player is plugged in. However, the PC and the Nomad Explorer do recognize it. Unforunately, it doesn't seem that you can easily use Explorer to tranfer files onto the PC in an organized manner, nor can you use it to play tracks that are on the Zen. My Zen Touch is Version .0.03, and i'm reluctant to upgrade the firmware because I can't back up the tracks on my PC! Is there anyway around this? Thanks!

mattisb,
Did you download the Jukebox plugin (Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource) that's meant for the Zen Touch player? If not, go to the website and download it.
Jason

Problem with Zen Touch 20

Hi to everyone....
My Zen Touch is recognized by my computer, but the Creative player doesn't play the Mp3 files selected (the player reads the file, but speakers don't play nothing!!)...
If I connect my Zen Touch to speakers, they play the selected tracks!!!
Can You hel me?
Thanx...

You're most likely using USB. See here in the Zen FAQ at Nomadness.net.

Problems with photoshop CS4 in Windows Vista 32 bits

I have installed Photoshop CS4 in Vista Ultimate 32 bits, in the installation i don´t have any problems.
When click to run Photoshop, Vista launch a message saing me to close de application, so i can´t start Photoshop.
Then i update de drivers of my Graphics card (ATI HD2900), and i try to start photoshop with the new drivers. The photoshop starts without problems.
I open it and i click in the right pane of styles, and Windows launch another message to close de application.
After that i start Photoshop and i read a message that says that Photoshop have desactivate the aceleration of GPU because there were some problems.
I go to the menu of performance in settings and Vista launch another message to close de application when i click in performance to open the settings.
Then i try to open another time the application and i try to open a *.png image file and i paint something in it, then i click in the "X" to close, but the application doesn´t close (i prove with "X" of the application and with the "X" of the image tab). I have to close it with de Task Manager.
Then i try to open a *.jpg image file and Vista launch another message to close the application.
I don´t know the reason of these problems, i´m trying to find something in internet.
I hope you can help me to resolve this problems, i need photoshop.
Thank you in advance.

Have you checked that the files actually "belong" to anyone? If you reinstalled your system recently, they may have invalid security descriptors. Try to check. Right-click one of the offending files, choose "Properties", then go to the security settings tab. You should at least see 3 entries (Administrators,[your user name], System). If you see additional entries only consisting of numbers and letters, uncheck the "inherit parent folder settings" option, choose to copy all permissions in the prompt that comes up, then delete those invalid entries. In addition, you may need to set a new owner in the "Advanced" options (it should however default to Administrator after the previous steps)...
Mylenium

Problems with Zen Touch on Windows Vista (64-B

Similar Messages

Maybe you are looking for