Problems with zen x-fi after downloading new update or after plugging it into my hi

hiya a couple of days ago i downloaded the new update for my zen x-fi 32gb, on the same day i plugged the zen into my hi-fi for the st time
ever since then the volume has been quieter and my equalizers havent been working
when i start the player up and use the ear-phones its really quiet but i turn the speaker on and off again and it sounds a little bit louder but not as loud as it used to be
i used to have the volume up to 6-8 and now its on 22-24, but it sounds like the same volume
i try to change the equalizers but it sounds no different
is there anything i can do? or is there anyway of telling wheather its the hi-fi or the update? thanks alot

Hi again.
After much fiddling with firmware and the player I have re-upgraded the firmware to the newest 08 version (it was already loaded anyway). I have also turned off all the 'extras' like the X-Fi and crystalliser and this has solved the crashing. I tested the playback the other day without these 'extras' and using the hold switch to power down the screen... and battery life was excellent - around 26 hours!
Anyway, the problem I have now is the battery is dying when the unit is turned off because it has gone into this standby mode i keep reading about. I have researched on this forum and Anything but ipod forum but i can't find a definiti've answer on how to solve this problem.
Can someone confirm which version of firmware I should downgrade to Or if there are any tricks to save my battery when i'm not using the player?
Thanks

Similar Messages

HT200084 Anyone else had a problem with the waves plugins on this new update?? got mine wrapped to 64 bit but are now not working?? Failed to open

as above???

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
See:
* [[Troubleshooting extensions and themes]]

Random Problems with Zen Micro? Try a diff. USB cable

I know people have mentioned this in other posts, but I thought I would reiterate it here. Many people seem to be complaining that their player is not recognized, or only sometimes recognized, or recognized by Windows (as a USB device) but not by their Creative software, or songs won't transfer, etc. Well, I had some similar problems which ALL went away when I started using a different USB cable - the one that shipped with the Micro just doesn't seem to work consistently.
So, if you are having problems with your player that you can't seem to solve any other way, you may want to try a different USB cable. It worked for me.
Hope this helps - I am (now) loving my new Micro!

I tried a different USB cable also, I thought that it would help, but I still got the same problems. I can almost guarantee that although you think you may have solved your issues, they WILL come back.
I've also been experiencing the "Player Not Connected" problem with my Zen Micro.
I've also had the problem where the Zen Micro just freezes in the "Docked" screen even after it has been disconnected from the PC
I've noticed that these are common problems with Zen Micros with the new firmware (.0.03)
My old Zen Micro with the old, original firmware did NOT have this connectivity problem
Creative should investigate these issues associated with this new firmware, or maybe even making the old firmware available for download to see if this really is the source of all these problems.

Problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Prem

I'm currently experiences problems with Zen Vision M Series Media Explorer using 32-bit Vista Home Premium. When i'm trying?to burn CD's onto my Zen after?I burn the first one then click to burn another it freezes. Is there any patches i should be downloading to solve this problem??Can anyone help? Please!!!!!!!!
?Message Edited by studandydon on 07-29-20070:38 AM

I have the same problem. It all started yesterday when I was installing the cd drivers in my new computer. I have searched numerous forums and some people had to return the product. Please admins help on this issue as I understand it is very serious.

Big Problem with Zen Micro - won't be detec

Hello people,
I got a big problem now with my Zen Micro 5GB. Since Saturday I have having my new PC, Fujitsu Scaleo
Intel Pentium D 2,8 GHz dual Processor
024MB Ram
PCI-e mainboard
Ati x700se Video Card
Windows XP with SP2 and several updates were already installed
Windows Media Player 0
Now, the problem is, I can't really use it on my PC. A few weeks ago I had the very old firmware. But then I thought I update it (why? I don't know...)I Updated to the version ..0 from Jul 05. It worked anyway...
So I plugged in the MP3 player to my new pc but it was not really detected or it did not want to work. When it was plugged in, I couldnt open any program. Even if it was Media Source or Opera or winamp... They did not appear. But they were "open" as they appeared in the task manager. So I couldnt use Media Source. So I tried with Zen Media Explorer, all buttons there were clickable but when I clicked on one butteon (like organize music...) it didnt react...
so I thought: "ok with this firmware, it wont work" So I updated the firmware to 2.2.02 Plays for sure. Neither with the new Media Source on your site nor with Zen Media Explorer (I installed the Update)it does not work. The plays for sure plugin for Media Source wasnt as well helpful. I can drag and drop files on my mp3 player, OK this is one way, but still when it is plugged in, I cant use any other program, as I cant open them.
I dont want to use the drag and drop way as I then have to download a program for editing mp3 tags and I cant as well make playlists...With Media Source it was so easy... I want to use Media Source and I want my PC react even if my Zen Micro is plugged in...
So what to do? I thought about installing the very old firmware what I had before I updated to ..0 but where can I download it's
I hope you can help me
Regards
eXMessage Edited by expredator on 0--2006 08:58 PM

MediaSource with the PFS plugin should work, if the player is being detected properly.
Presumably it isn't, so you need to verify this by looking in Device Manager when the player is connected.

Problem with flash on IE11 after using adobe cleaner

Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Problems With Zen Touch Turn

After just recently purchasing a Zen Touch in December 2005, I already have problems with it.
I have never dropped it or hit it. I plugged it in to re-charge one day after using it and when it was done charging I turned it on, used it for 5 minutes then set it down. The next morning I went to turn it on to use it, and it wouldn't turn on. The blue light at the side on the power button was on, but the screen just wouldn't show up. Now the blue light won't turn off. I have read about these problems with Zen Micro freezing up and read about Zen Touch freezing up back in 2004 when it was released. I have phoned the number but couldn't seem to get through. Should I consider taking it in? Or is there an easier way?

Have you tried resetting it's Connect to the mains adapter and press the tiny recessed button on the side of the player. Don't use anything sharp to press it, a bent paper clip is best.

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

I have a problem with a chart refreshing after its bound data provider changes.

I have a problem with a chart refreshing after its bound data
provider changes. After the subsetHighLowData.refresh() is called I
would expect the chart to redraw, but it still looks the same. I
even inspected the debugger to see if the slice had taken place and
it had.
Any ideas coding friends?

"nikos101" <[email protected]> wrote in
message
news:gib6aa$prr$[email protected]..
>I have a problem with a chart refreshing after its bound
data provider
>changes.
> After the subsetHighLowData.refresh() is called I would
expect the chart
> to
> redraw, but it still looks the same. I even inspected
the debugger to see
> if
> the slice had taken place and it had.
>
> Any ideas coding friends?
>
> subsetHighLowData.source =
>
highLowData.source.slice(slider.values[0],slider.values[1]);
Just use the ArrayCollection's removeItemAt, and it should
handle the event
dispatching for you.
HTH;
Amy

Problem with reinstalling Adobe Illustrator CS4 on new pc

Using a new PC with Windows 7. Upon reinstalling and inputting serial number, prompt appears..."We looked inthe default locations for qualifying products installed on this machine but none found. You may verify upgrade eligibility now by completing fields to the right." Choices given do not include Adobe Illustrator CS4. What next? I appreciate the help.

I have a disc in the same box that says CS3. I thought that was an older version. Should I try installing that disc first? It seems to have a different serial number. Thanks so much for your help. I appreciate it.
Date: Mon, 3 Sep 2012 15:25:41 -0600
From: [email protected]
To: [email protected]
Subject: problem with reinstalling Adobe Illustrator CS4 on new pc
    Re: problem with reinstalling Adobe Illustrator CS4 on new pc
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
It is looking for the qualifying product which entitles you to use the Illustrator CS4 update. Did you have an older version of Illustrator which upgraded from?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4670448#4670448
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4670448#4670448. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?

I'm having problems with my internet connection after installing OS X Lion. Is this a known problem or just a local problem?
After +/- 10 to 15min my connection is gone.
Does anyone have a sollution?

Lots of people are having the same problem, you're not the only one, belieeeeve me.
Just Googling the problem gets you tons of people complaining about the same thing, SOMETHING is up with Lion what wasn't happening with Snow Leopard. i just bought a new Imac and it CAME with Lion, so i started experiencing this internet dropout immediately.
It's been going on for the most of a year it looks like (at least by the dates from the threads i've been reading)
So your best bet is to fiddle with the System Preferences and read what other people have used to make theirs work. i'm doing that myself right now. I already posted a similar thread last night trying to figure out why my connection kept on dropping, i got a reply which linked me to a site. i followed the instructions there, so far so good, but i'm just being cautiously optimistic.
i'm gonna call Apple today and see if they've found anything, though seeing as this is a problem right out of the box there may not be an immediate solution. Good luck hunting for a solution :3
Site:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

TS1398 I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problems with zen x-fi after downloading new update or after plugging it into my hi

Similar Messages

Maybe you are looking for