Problems working with ip helper-address command

I have 2 switches L3 4507 working in HA with HSRP, so in the active switch I have the following interface configuration:
interface Vlan2
ip address 10.1.0.2 255.255.254.0
standby 2 ip 10.1.0.1
standby 2 priority 150
standby 2 preempt
interface Vlan4
ip address 10.1.4.2 255.255.255.0
ip helper-address 10.1.0.8
standby 4 ip 10.1.4.1
standby 4 priority 150
standby 4 preempt
interface Vlan15
ip address 10.1.5.2 255.255.255.128
ip helper-address 10.1.0.8
standby 15 ip 10.1.5.1
standby 15 priority 150
standby 15 preempt!
And, in my standby switch I have this configuration:
interface Vlan2
ip address 10.1.0.3 255.255.254.0
standby 2 ip 10.1.0.1
interface Vlan4
ip address 10.1.4.3 255.255.255.0
ip helper-address 10.1.0.8
standby 4 ip 10.1.4.1
standby 4 priority 50
interface Vlan15
ip address 10.1.5.3 255.255.255.128
ip helper-address 10.1.0.8
standby 15 ip 10.1.5.1
standby 15 priority 50
So, the problem is that in some ports belonging to a particular vlan, for example to the vlan 15 most to take an IP address form the network 10.1.5.0 /25, but that port are takenig an ip from the network 10.1.0.0 /23
Ill apreciate your help, thanks

I guess the issue will be related to the DHCP server alone and its settings since you said your clients get an IP from the DHCP server. That confirms that your ip-helper is working fine and its routing the DHCP broadcasts and then assigns an IP from the DHCP server.
So the only possible reason i can think of should be the settings of the DHCP scope.
Do you have the same problem with all the scopes, i mean whether all the different vlans get incorrect IP or ???, is this issue is related to only one VLAN ??
Also check whether you have any other DHCP servers other than the allowed since its some times possible in your network other DHCP servers unknowingly which you can find by shutting this DHCP :)

Similar Messages

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

The software that's used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem.

I'm trying to make a DVD menu in Encore, and then when it came round to loading my AVI files into it, bam. Apparently, I don't have the decoders necessary - this is unusual.
I'm running on a Apple MacBook Pro, and I have Perian installed for all my codec needs. I just don't understand!
Any help would be most appreciated...

Welcome to the forum.
It is most likely that the error message is telling you the truth - the necessary CODEC is not available. It might not be installed, or might be broken.
The first step is to gather the full details of your .AVI files. This ARTICLE will help explain the potential issues. Sorry that the utilities mentioned are for the PC. Do not know if you can run them in Parallels, or Bootcamp, or other, but similar should be available for the Mac if you cannot.
I have to admit that I know little of Mac's, and especially how they install and handle CODEC's. On the PC, I can offer help there, but not in this case. Again, with my "sorry."
There could be two ways to handle the issue, and that might depend on the info gathered afer you read the above article. It could be that the simple installation of the proper CODEC will fix it perfectly and easily. Or, it could mean that you will need to convert your .AVI to something along the lines of a DV-AVI. Though I do not use them in Encore, I have no problem working with .MOV [Animation CODEC] files from FCP in my PrPro. I've just always done all editing in PrPro, before Exporting/Importing to En. I do not know how En will handle .MOV's, but if some Mac-only CODEC is used, probably not so well.
Good luck,
Hunt

Need a bit of guidance with ip helper-address on a L3 switch

Hi All,
Happy New Year!
Could some one be kind enough to have a look at a PT file for me and tell me where I am going wrong please?.
It's a practice one for a college assignment I am working on, for which I have to submit an original network, and then suggest some possible improvements. My first PT file consists of 3 LANs, all using L2 switches configured with VLANs and routing on a stick, with ip helper-address pointing to a DHCP server on one of the LANs. That all works fine.
Now I am trying to create a test network that uses a L3 switch that has VLANs, I want the end user devices to obtain addressing from a DHCP server on a separate network, I have configured the VLANs, gave them IP addresses, entered the ip helper-address, the link between the switch and router has had the "no switchport" command executed on the switch, I given the connected port on the switch a relevant IP address to the router interface it is connected to, both router and switch have OSPF configured with network statements, but DHCP requests are failing.
In simulation mode the packets are reaching the DHCP server but are not returning, and I'm a little confused as to what I have done wrong.
Attached is the PT file, please bear in mind this is just a test PT file that I have been practicing with before creating the final PT file for submission.
Any advice would be greatly appreciated.
Kind regards
Jon

Hello Haihua,
Thank you very much for that, I do feel a little stupid now..., I completely forgot about the DG on the server.
Thanks again.
Jon

How do I reset the password that allows me to download reader - I worked with chat help - we rest my password and I can get into my adobe account but when I try to download reader and work my way through the process when I get to the password it will not

How do I reset the password that allows me to download reader.. I worked with chat help two hours last night - we have reset a password that lets me into my adobe account but in the download reader process that password will not work - where it says Adobe reader wants to change something and please type in password, just vibrates with the dots glowing purple but will not open…. what do I do to reset that password or get it to function. they would not assist me further they said its a free download and I would need to seek help from forums ( all this is new to me )
so "forums" help…what do I do ?
thank you
PL

patricia here again:
I am the system administrator - personal computer
I have been able with your lead to find the password I need , and to have install happen
however - when I then go to the website to download the Pdf document I need I get a screen with the big red adobe icon that says to complete and down load this document I must launch adobe reader a dn sign the terms of agreement , close browser and reopen.
but thatscren has no choice buttons whatsoever, I cannot find anywhere a adobe reader image to launch - been into launch pad , preferences etc.
so now the loop is the pdf document and the adobe screen saying I must do terms of agreement
like is this Kafka like or what ...
suggestions?
thanks
P.

ASP application has problems working with oracle database 8.1.7

ASP application has problems working with oracle database 8.1.7 through both oracle ODBC driver and Microsoft ODBC driver
We have an ASP application running on Windows 2000 server, and with 8.1.7 Net8Client and MDAC 2.6 SP1.
The application worked fine with an Oracle 8.0.5 database.
After upgrading oracle database to 8.1.7.0.0, our ASP application works fine except when updating the same data record more than once. The application is not saving our updates.
We tested our application using Oracles ODBC driver v8.1.7.5.0
and experienced more problems. We had problems just bring up our data entry pages. In either case, we are returned with some 505 errors in our browser, problems with the ASP pages and IIS, the page is not displaying.
If anyone has some suggestions on how to fix my problem, please advise. Thanks in advance.

thanks...i saw one article with this approach..but the document did not present the detailed process...do you have one? i am still searching for a good procedure to follow...since it is an old database and focusing/studying old versions like this is a pain in the a**... :(

I want to resigne an annual engagement ? how to do ? it doesnt work with " more help"! turn turn turn turn over and over

i want to resigne an annual engagement ? how to do ? it doesnt work with " more help"! turn turn turn turn over and over

This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-start here https://forums.adobe.com/thread/1703848
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
--and two links which may provide more details, if the above links don't help you
-http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

Push mail on iPhone doesn't work with my .mac address, all other accounts working fine. Does anybody experienced problems like this?

Since upgrading to IOS 5 and using icloud my .mac account doesn't work with push anymore. I'am using two other mail accounts with push function and they work fine. I have heard from other users havong same problem, but does anybody have a solution to this? I have deleted the account and set it up again, worked for one test mail and then failed onwards..

Since upgrading to IOS 5 and using icloud my .mac account doesn't work with push anymore. I'am using two other mail accounts with push function and they work fine. I have heard from other users havong same problem, but does anybody have a solution to this? I have deleted the account and set it up again, worked for one test mail and then failed onwards..

Problem ,working with UNTIL TIME..

hi
i have a serious problem when issuing UNTIL TIME commends.
Such as this command in RMAN:
run {
backup
(archivelog from time '02-OCT-06 09.00.00'
until time '03-OCT-06 21.00.00');
or working with UNTIL TIME in point-in-time recovery .
it gives me this error:
ORA-01830: date format picture ends before converting entire input string
i have had this problem for a long time and i haven't found a solution for it.
i will be grateful if anyone can help me beat this problem

Try this:
run {
set until "to_date('01-10-2006','dd-mm-yyyy')";
Best Regards
Krystian Zieja / mob

Problems working with Oracle Lite

I have read that there are some limitations working with olite. What can I do to solve them, when I work with Buissness componentes?

I am having a similar problem, where I couldn't connect to Oracle 8i database (817). I am getting a error message when I tried to use Packaging Wizard -> Snapshot -> Import -> Username/password and jdbc:oracle:oci8:@connect string or jdbc:oracle:thin:@host:1521:Sid
The error message is 'No Suitable Driver. Make Sure the Proper JDBC drive for "jdbc:oracle:oci8i:@<connect string>" is in the classpath"
I would appricated if someone can send me any help on this.
My email address is [email protected]
Thanks
Joshua

Problem Working With Framemaker 9 Dita XML Files in Framemaker 10

I just upgraded to Framemaker 10. I am encountering a number of problems when I try to work with my Dita XML help topics, which were last saved in Framemaker 9 format.
1. Using the Default Dita Template
When I open one of my documents in Framemaker 10, the Dita 1.2 template ditabase.fm is automatically applied. Everything seems fine. But then when I convert the XML to Eclipse help (which is essentially html, so we're going from XML to HTML) using Dita Open Toolkit ant scripts, I see this message:
[pipeline] [DOTJ013E][ERROR] Failed to parse the referenced file 'html\c_licensing.xml' due to below exception. Please correct the reference base on the exception message.
[pipeline] c_licensing.xml Line 25:Attribute "xmlns:ditaarch" must be declared for element type "dita".
I then opened the xml file in a text editor, and I saw this on line 25:
<dita xmlns:ditaarch = "http://dita.oasis-open.org/architecture/2005/">
Line 25 looks fine to me. Am I missing something?
2. Switching to a 1.1 Dita Template
I tried to work around the above problem. In Framemaker, I tried to set a different structured application as the default one. I closed all files and chose the default Dita 1.1 structured application (it defaults to the Dita 1.1. Composite app.)
Then I tried to open my file: I got this message inside Framemaker:
"Validation of XML failed. Continue?
Error at [FILE PATH], line 25, char 72, Message: Attribute '{http://www.w3.org/2000/xmlns/}ditaarch' is not declared for element 'dita'
Sounds familiar, doesn't it?
I switched from the default Dita 1.1. Composite structured application to the Dita 1.1. Topic structured application. Then I dirtied the source file and saved it. The messages I got in FrameMaker log window included the one above, plus I got a variety of Unknown Element messages, things like this:
Unknown element dita,
unknown element concept,
various attributes are not declared for concept,
unknown element conbody.
If I switch back to the Dita 1.1 Composite application all of these messages diappear except for this one:
Attribute '{http://www.w3.org/2000/xmlns/}ditaarch' is not declared for element 'dita'
My ant conversion scripts from the Dita Open Toolkit are still unable to process this file. They give the same message as is listed in (1) above and the file is not converted to HTML.
Can anyone help me with this problem? I've also posted this question to the Dita Users Group on Yahoo Groups. If I get an answer in one place, I'll post it in the other.
Thanks,
Nina P.

I really appreciate all the help you are providing with this, Scott. I tried your latest suggestions. Here's what happened:
Application Mappings:
I figured out how to add my "BigPage" structured application to the Applications Mappings dialog. I made a new "BigPage" mapping type, then figured out the non-intuitive part: how to add my individual BigPage topic types to it. I closed and reopened FrameMaker opened my test document, and, as before (before I did the application mappings) I saw my BigPage applications listed in the Structure Tools > Set Structured Application drop-down. I selected the appropriate application (in this case it was DITA1.1-BigPage-Reference-FM and clicked the "Set" button.
It is at this point in Framemaker 9 (and also once, in FrameMaker 10, early in this process, but I haven't been able to replicate it since) that the page size would change to tabloid size, indicating that the document was using the template from the BigPage reference structured application, not the regular DITA1.1 reference application. But this did not happen.
I tried saving the document, closing it, and reopening it. Once again the default structured application assigned to that document was "reset" to DITA1.1-Reference-FM. But the fact that the page size did not immediate refresh to tabloid size told me that although I did select the BigPage application in the drop-down, it wasn't being applied.
Public IDs:
The public ID in my test reference XML file is: <!DOCTYPE reference PUBLIC "-//OASIS//DTD DITA Reference//EN" "reference.dtd" [
The four public IDs in the DITA1.1-BigPage-Reference-FM entry in structapps.fm (in the Entity Locations section) are:
-//OASIS//DTD DITA Reference//EN
-//IBM//DTD DITA Reference//EN
-//OASIS//DTD DITA Composite//EN
-//IBM//DTD DITA Composite//EN
Do you see anything wrong with the above? .
Directory Structure:
Maybe I cloned the application incorrectly? Here's what I did:
1. In C:\Program Files (x86)\Adobe\AdobeFrameMaker10\Structure\xml, I copied the folder called DITA and pasted it into the same directory. I renamed this folder DITA-BigPage
2. Inside DITA-BigPage, I opened the app folder. Inside each subfolder in app, DITA-Reference-FM, for example, I opened the edd file in Framemaker. In this case, the edd file name was reference.edd.fm.
3. I edited the top line of reference.edd.fm. It originally said:
Structured Application: DITA1.1-Reference-FM.
I changed it to say:
Structured Application: DITA1.1-BigPage-Reference-FM
4. I saved the EDD file. Then I opened the template file in the same folder. It was called: reference.template.fm.
5. In reference.template.fm, I first changed my page size: Format Menu > Page Layout > Page Size > Tabloid > Set.
6. Then I imported the element definitions from the corresponding EDD file: File > Import > Element Definitions > reference.edd.fm > Click Import > Click OK to dismiss verification message.
7. I repeated the above process for all topic-type folders. For the maps types, I did not change the page size, as these will never display as topics in my online help. I did nothing to the dtd folder.
8. Once all this was done, I opened structapps.fm. I did the following to all Dita1.1 elements in the structure tree.
Selected the Dita 1.1 XMLApplication element, for instance, the one named Dita1.1-Reference-FM, copied it, and pasted it underneath the original element.
The original first few lines in the clone looked like this:
Application Name: DITA1.1-Reference-FM
      Template:              $STRUCTDIR\xml\DITA\app\DITA-Reference-FM\reference.template.fm
      DTD:                       $STRUCTDIR\xml\DITA\app\dtd\reference.dtd
      Read/write Rules: $STRUCTDIR\xml\DITA\app\DITA-Reference-FM\reference.rules.fm
      DOCTYPE:              reference
I changed these lines to look like this, using your suggestion to create a variable for the first part of the URLs to enable speed and accuracy:
       Application Name:      DITA1.1-BigPage-Reference-FM
               Template:                    $STRUCTDIR\xml\DITA-BigPage\app\DITA-Reference-FM\reference.template.fm
               DTD:                            $STRUCTDIR\xml\DITA-BigPage\app\dtd\reference.dtd
               Read/write Rules:        $STRUCTDIR\xml\DITA-BigPage\app\DITA-Reference-FM\reference.rules.fm
               DOCTYPE:                    reference
I also changed the "Filename" URLs in the "Entity Locations" section of this XMLApplication clone from $STRUCTDIR\xml\DITA\app\ to $STRUCTDIR\xml\DITA-BigPage\app\. Applying the "BigPage" variable I'd created for this purpose made this go quickly.
Finally, after this didn't work the first few times I tried it, I got suspicious that the structapps.fm file in my AppData folder (in my case, it was in the Roaming subfolder under the usual Adobe directories) was overriding the modified structapps.fm file in the Framemaker program directory so I replaced the one in AppData (it had all the original settings) with my modified version. This had no effect, unfortunately.
That was my process. After doing the above, the Dita1.1-BigPage applications all listed in the Set Structured App drop-down. They just didn't work,when applied to my XML documents. Nor did the application "remember" what structured application I had set when I opened a new xml document or closed/reopened the current document or closed/reopened the application. Did I place the directories correctly for Framemaker 10? This is the way I did it for FrameMaker 9 and it worked successfully.
As much as I'd love to solve this mystery, I've thought of a workaround I can fall back on that doesn't involve using a cloned application. I will change the page size of a few of the original Dita1.1 sturctured application templates to tabloid size, but leave the Topic structured application at letter size. I'll then apply the Topic structured application to my PDFs and use the others for my help topics. I'll set this up now. If this doesn't work, then I'll know there's a much bigger problem at the base of this, perhaps even something to do with changing page sizes in templates.

Problem working with HttpClusterServlet

hi:
          this is the first time i work with weblogic6.1(NT platform) cluster.
          i config the DefaultWebApp as web application which will proxy requests to
          my cluster which consists of two weblogic server running on the same host
          (http://localhost:7001 and http://localhost:7003).
          my web.xml before is as floowing(before it works as a proxy)
          <?xml version="1.0" ?>
          <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application
          1.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
          <web-app>
          <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          </welcome-file-list>
          </web-app>
          but when i modify it as following as a proxy to my cluster
          <?xml version="1.0" ?>
          <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application
          1.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
          <web-app>
          <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          </welcome-file-list>
          <servlet>
          <servlet-name>HttpClusterServlet</servlet-name>
          <servlet-class>
          weblogic.servlet.internal.HttpClusterServlet
          </servlet-class>
          <init-param>
          <param-name>defaultServers</param-name>
          <param-value>
          bea:7003:7004
          </param-value>
          </init-param>
          </servlet>
          <servlet-mapping>
          <servlet-name>HttpClusterServlet</servlet-name>
          <url-pattern>/</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>HttpClusterServlet</servlet-name>
          <url-pattern>*.jsp</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>HttpClusterServlet</servlet-name>
          <url-pattern>*.htm</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>HttpClusterServlet</servlet-name>
          <url-pattern>*.html</url-pattern>
          </servlet-mapping>
          <init-param>
          <param-name>DebugConfigInfo</param-name>
          <param-value>ON</param-value>
          </init-param>
          </web-app>
          there's no response anymore , no error .
          there's little docs available and i need your help
          regards


Hi.
          A couple of suggestions:
          1. Clusters must use the same port number. If you are running a cluster on a
          single machine this means that your machine must be multihomed and each member
          of the cluster must bind to a unique IP address. Your other alternative is to
          use multiple machines. I don't believe your configuration will work for a
          cluster.
          2. you don't have yoru default servers listed correctly in your web.xml
          file. To specify 2 different servers you need to specify each server
          separated by a '|' character as follows:
          myserver1:70017001|myserver2:7001:7002 The second port number is for SSL
          communications. In your xml file you are only specifying a single server.
          Hope this helps,
          Michael
          daniel wang wrote:
          > hi:
          > this is the first time i work with weblogic6.1(NT platform) cluster.
          > i config the DefaultWebApp as web application which will proxy requests to
          > my cluster which consists of two weblogic server running on the same host
          > (http://localhost:7001 and http://localhost:7003).
          >
          > my web.xml before is as floowing(before it works as a proxy)
          >
          > <?xml version="1.0" ?>
          > <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application
          > 1.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
          > <web-app>
          > <welcome-file-list>
          > <welcome-file>index.html</welcome-file>
          > </welcome-file-list>
          >
          > </web-app>
          >
          > but when i modify it as following as a proxy to my cluster
          >
          > <?xml version="1.0" ?>
          > <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application
          > 1.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
          > <web-app>
          > <welcome-file-list>
          > <welcome-file>index.html</welcome-file>
          > </welcome-file-list>
          > <servlet>
          > <servlet-name>HttpClusterServlet</servlet-name>
          > <servlet-class>
          > weblogic.servlet.internal.HttpClusterServlet
          > </servlet-class>
          >
          > <init-param>
          > <param-name>defaultServers</param-name>
          > <param-value>
          > bea:7003:7004
          > </param-value>
          > </init-param>
          >
          > </servlet>
          >
          > <servlet-mapping>
          > <servlet-name>HttpClusterServlet</servlet-name>
          > <url-pattern>/</url-pattern>
          > </servlet-mapping>
          >
          > <servlet-mapping>
          > <servlet-name>HttpClusterServlet</servlet-name>
          > <url-pattern>*.jsp</url-pattern>
          > </servlet-mapping>
          >
          > <servlet-mapping>
          > <servlet-name>HttpClusterServlet</servlet-name>
          > <url-pattern>*.htm</url-pattern>
          > </servlet-mapping>
          >
          > <servlet-mapping>
          > <servlet-name>HttpClusterServlet</servlet-name>
          > <url-pattern>*.html</url-pattern>
          > </servlet-mapping>
          > <init-param>
          > <param-name>DebugConfigInfo</param-name>
          > <param-value>ON</param-value>
          > </init-param>
          >
          > </web-app>
          >
          > there's no response anymore , no error .
          >
          > there's little docs available and i need your help
          >
          > regards
          Michael Young
          Developer Relations Engineer
          BEA Support

Router Problem - Works with Windoze, Linux, but not with Mac

I can't seem to get any router to work with my Mac.
I've tried a Linksys 'b' router, a Netgear 'g' router and a Belkin 'g' router.
No joy.
When I connect my Mac directly to my cable modem (Motorola Surfboard), there are no issues. When I connect the router in between, the Mac pulls the proper ip address and I can ping the router, but I can't get any further. If I try to ping an outside ip address (such as the 4.2.2.2 dns) I get the error message "ping: sendto: Cannot allocate memory". [Does anyone know what this message means?]
A second computer (IBM NetVista) connects reliably using Windoze XP. The same machine, booted in CentOS also connects reliably (after disabling the firewall).
Note, these are all wired connections. I'm not even trying to use wireless yet. The cables all check out, since they all work in other configurations (the Mac->router cable is the same one I use for Mac->Surfboard, and the router->surfboard cable works when connecting from the NewVista machine.
I thought the Mac problems might be firewall related. I had "Brickhouse" installed,but it has since been removed. My network settings no long advise that there is any firewall software in place (previously Sharing > Firewall was greyed out with message that other firewall software was installed). Sharing > Firewall now reports "Firewall Off".
I know the routers work, since I can connect from the NetVista machine. I know the cables are good, because they all work in other configurations. I know the Mac is seeing the router, and the router is seeing the Mac because a correct ip address is pulled. I can even communicate between the machines (ftp,ssh) but I can't get internet access using the Mac through the router.
Oh yeah... one other oddity. When I have personal web sharing enabled, an attempt to access the router setup page at 192.168.1.1 fetches the local server index.html page instead of accessing the router. When web sharing is off, I get a "you are not connected to the internet" message.
Any insight?

Very strange indeed!
Only 2 suggestions at this point...
Get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Try dragging these files to the Desktop & Reboot...
/Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist

Time Machine stopped working with new Mac address.

Greetings,
I have an IOMEGA 500, FireWire which I used to use for Time Machine. I now have a new Mac address and do not have access to the old Mac address. Is there any way that I can get the IOMEGA to start working with Time Machine? If so please give me step by steps instructions on how to make this external hard drive work again with Time Machine.
Any help is most appreciated.
Thank you for your attention to this matter.

macuserr222 wrote:
Greetings,
I have an IOMEGA 500, FireWire which I used to use for Time Machine. I now have a new Mac address
Do you have a new Mac, or a new logic board? Either will get you a new MAC (Media Access Control) address, which Time Machine interprets as a different Mac.
Do you mean you haven't started doing backups of the new Mac, and want to view the old ones? If so, see #E2 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If you want to use the old backups to set up a new Mac, see [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of this forum).
When you do your first backup, OSX should ask how you want to handle the old backups. See #B5 in Troubleshooting for details.
If that's not what you mean, please explain exactly what's going on, and what happens when you try to do whatever you're doing.
Message was edited by: Pondini

DVD/CD Drive Problem: Works with DVDs, but won't Read CDs

As the title states, my laptop's CD drive will not read CDs (it is a satellite A205 by the way). The yellow light lights up, it makes noises as if it is trying to read the CD, but just doesn't do it. It won't show up as a CD being there when I look it up on "computer". On the other hand, when I put a DVD in, it works no problem. Anyone have any idea of what I could do? I've tried uninstalling the driver on device manager and restarting the computer, thus allowing it to reinstall it, and it didn't help. Any and all help is greatly appreciated!

Try cleaning out the drive with compressed air and/or a lens cleaning disk. This often times helps.
Next try booting to a Linux Live CD or some other Self Booting CD like Memtest. If it doesn't then you know for sure that the drive itself is defective as you are taking Windows out of the equation. If it does, then you know it's a Windows problem which will more than likely require restoring the system to it's factory out of box state using the Recovery DIsks to fix.
If the drive works with a Live CD then try going into device manager, uninstall the DVD drive, then reboot the system to have Windows automatically re-install it. This sometimes helps as well.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Problems working with ip helper-address command

Similar Messages

Maybe you are looking for