Problen Configuring with Net8 Assistant:URGENT

Hi All,
I have instaled Personal 8i Oracle on my desk top. I am trying to use Net8 Configure Assistant. WHEN i SELECT THE service for the database I created during Installation and try to test the connection, I am getting: ORA-12541: TNS:no listener Error. I have entered ymhost name and used the default port number 1521 for configuring listener.
I could connect fine from PL/SQL without using SID just fine. How ever I tried to use the Employee.java program provided with the installation for thin driver and I am getting the connection problem.
Are these two related. please let me know.
Thanks in Advance.
null

Change the registry settings under hkey_local_machine\software\oracle\tns_admin.
Here specify the oracle database tnsnames directory that contains the tnsnames.ora file.

Similar Messages

  • Integrating oracle with NMS? --URGENT

    hi all!
    this is very urgent!
    i have 10g database running on rhel4. it is using the database control. We have Aprisma Spectrum working as the NETWORK MONITORING SYSTEM which uses SNMP POLLS. They are pulling info from all the servers using spectrum.
    I am asked to configure the oracle database so that spectrum can pull information from the database.
    i have gone through the internet, and the info which i got is that, i need to integrate oracle sub-agent to the agent already running on the server (snmpd).
    do i need to install oracle management agent or the em sub-agent is sufficient.to be integrated with the spectrum management agent running on the server?
    if so, how do we configure?

    hey hernandez!
    thanks for the reply. i did happen to look into your postings on the
    Agent configuration Assistant FAILED
    My question is, can't we configure the subagent of EM database control to configure with the snmpd daemons running on the host which talk to the management service like aprisma spectrum??
    is it necessary that i need to install the grid control in my network and than install the oracle managment agents on all the database host (to be monitored)?
    can't i install only the oracle management agent on the host and configure it to work with the aprisma spectrum master agent running on the host (snmpd daemons) (and will not have to install the grid control)??
    please clarify !!!

  • Silent install with net assistant failing

    I am installing an 8.1.6 custom config with an response file. The config assistant is erroring. I can't figure out how to pass the netca.rsp to the config assistant. Any suggestions?
    This is the input to the install,
    myinstall.rsp
    [General]
    RESPONSEFILE_VERSION=1.7.0.0.0
    [SESSION]
    FROM_LOCATION = "C:\newstage4\sqlnet816\stage\products.jar"
    ORACLE_HOME = "C:\oracle\ora81"
    ORACLE_HOME_NAME = "OHOME1"
    TOPLEVEL_COMPONENT={"oo4o.group","1.0.0.0"}
    SHOW_COMPONENT_LOCATIONS_PAGE = False
    SHOW_CUSTOM_TREE_PAGE = True
    SHOW_SUMMARY_PAGE = False
    SHOW_INSTALL_PROGRESS_PAGE = True
    SHOW_REQUIRED_CONFIG_TOOL_PAGE = False
    SHOW_OPTIONAL_CONFIG_TOOL_PAGE = False
    SHOW_END_SESSION_PAGE = False
    [oo4o.group_1.0.0.0]
    COMPONENT_LANGUAGES={"en"}
    INSTALL_TYPE = "custom"
    DEPENDENCY_LIST={"oracle.networking.netca","8.1.6.0.0"}
    [oracle.networking.netca_8.1.6.0.0]
    OPTIONAL_CONFIG_TOOLS={"netca"}
    s_responseFileName=C:\download\oracle\cd817\response\netca.rsp
    This is the output from net config:
    silentinstall.log
    silentInstall2002-08-14_04-14-41-PM.log
    Configuration tool Net8 Configuration Assistant failed
    Parsing command line arguments:
    Parameter "orahnam" = OHOME1
    Parameter "instype" = custom
    Parameter "inscomp" = client,net8
    Parameter "insprtcl" = nmp,tcp
    Parameter "cfg" = local
    Parameter "authadp" = NO_VALUE
    Parameter "nodeinfo" = NO_VALUE
    Parameter "responsefile" = NO_VALUE
    Parameter "silent" = true
    Done parsing command line arguments.
    Error loading native library: oranjni8.dll.
    java.lang.UnsatisfiedLinkError: jniGetOracleHome
         at oracle.net.common.NetGetEnv.getOracleHome(NetGetEnv.java)
         at oracle.net.ca.CmdlineArgs.setOraArgs(CmdlineArgs.java)
         at oracle.net.ca.NetCA.<init>(NetCA.java)
         at oracle.net.ca.NetCA.main(NetCA.java)
    Error :*** Alert: One or more tools have failed. It is recommended but not required that these tools succeed for this installation. You can now select these tools, read its details to examine why they failed, fix those problems, and retry them. Or, you can click "Next" to continue. ***
    The installation of oo4o group was successful, but some optional configuration tools failed or were cancelled

    Hi i am facing the same problem. If you got the solution please reply for the same or mail me on [email protected]

  • Can't partition HD with Bootcamp Assistant on brand new iMac

    I just got a 27" 1TB brand new iMac three days ago. After copying over all my files from my previous computer (PC), installing some software packages and configured the Mac the way I want it, yesterday I wanted to partition 80GB out of remaining 330GB with bootcamp assistant to install Windows 7. After one hour it stopped with an error message that it wasn't able to move some files and I would need to re-format the HD and start again.
    Is there really no other way? It took me two days to get to where I am.

    It should only take less than a minute.
    So just use OS X software to clone what you have to another hard drive, then do an erase and restore.
    And backup before starting is at the top of the list of things to do to prepare.
    http://www.apple.com/support/bootcamp - re-read the pdf guide linked at the top and other tech articles.
    And you really do want bootable clone image of Mac OS anyway, in addition to or in place of TimeMachine, so no loss in doing so. It isn't as if you will lose or have to redo.
    It needed contiguous free space and no files at the end of the disk. But installers and updates do scatter files and fragment free space a lot and can leave files locked where they can't be moved.
    SuperDuper
    Carbon Copy Cloner
    iDefrag
    iPartition
    Apple Disk Utility Restore
    And you can have OS X on multiple hard drives, plus it really helps for doing the type of maintenance and repairs needed for updates and proper running.

  • HT5927 Using apple configurator with supervised devises, enabling iCloud/ find my iOS device (after being supervised), backing up that supervised / find my iPhone enabled image, --issue; unable to apply back up to any iOS device (including the orign. devi

    Senario:
    Need to manage 500 Enterprise iPads
    Requirements;
    1) Trackable via Find my iOS device  (we have 500 iPads and with the 100 device limit per iCloud account for Find my iOS device limit we have 5+ iCloud accounts).
    2) Individually named iPads for locating and sending commands to wipe, lost mode, etc.. on map per Find my iOS device (we uniquely name them in Apple Configurator either by using the "sequensetially numbering feature", or by creating individual back ups (yes, 450) with the name specified in the image).
    3) Find my iOS device feature enabled in base Prepared or Supervised image (using one of our 5+ iCloud accounts) (image can be created during prepared stage, or in supervised stage) - tried both and have the same issue - which I am getting to...
    4) VPP codes for paid apps (all VPP codes purchased with generic account which is the Apple Admin account for VPP purchases). Apple Configurator is set up under a different/ unique Apple account (i.e. not VPP admin account) and not logged into iTunes for any purchases/ services).
    Issue: Can not do any following senarios;
    A)
         1) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Prepare stage (added during preparing stage)
         2) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Supervised stage (added after supervising, and then backing up that supervised and iOS Find my iOS device enabled)
    B) 1) Apply master image to any Supervised iPad (under senario step A) or senario step B)), including the (Supervised or/ Prepared iPad that was used to create the maset iOS 7 image
    Result = fail with Apple generic code "4" ; This is obviously due to Find my iOS device feature enabled during image capture.
    According to Apple (see Apple Config. Help) the 'Activation lock' (new feature in iOS 7) will not be enabled on a supervised device when an iCloud account with "Find my iDevice" is enabled. Their "help files" seem to imply after the device is Supervised, and a person (presumably and end user) adds thier own iCloud account with Find my iOS device enabled the activation lock is not enabled and erasing/ reconfiguring with Apple Configurator will not cause reimaging probhlems such as requiring the end user's credentials to reconfigure the device using Apple Configurator (i.e. you won't need the end user's credentials).
    Needed: To be able to configure Supervised iPads with iCloud account (Enterprised owned iCloud account) configured on the basse image, which has Find my iOS device enabled, and to be able to apply that base image to all Enterprise iPads without generic apple error code 4 issue.

    Hi all
    I am trying to replicate these steps in my environment but I am having trouble getting an iCloud backup restored to a supervised device. Can someone clarify the steps? The parts I am unsure on are:
    1) Do you Prepare in Configurator with all the institution owned apps? Or do you install them after restoring the iCloud backup?
    2) After entering the personal AppleID to restore the iCloud backup, the setup wizard prompts for the Institution/Configurator AppleID, there is an option to 'Skip Now'. Do you enter in the password for the institution account? or do you skip that step?
    3) What exactly is on the screen in the 'mini setup assistant' after the restore when you Refresh with Configurator?
    Any help would be greatly appreciated!

  • Please wait while windows configures hp product assistant

    To HP and Company
    9 Jan 2014
    I kept getting the following message in red on my Windows 7 Dell Computer so I did everything the help sites told me to do and nothing helped.  I got rid of all HP files and the problem went away.  I ordered the CD software for my HP C7180 printer and when it came, I loaded it to the PC and guess what, the problem came back.
    Please wait while windows configures hp product assistant
    I’m at wits end and need a final solution to this problem.
    Will you please provide me with the solution for once and for all?

    Problem Solved    Problem Solved    Problem Solved  windows configures hp product assistant
    Removed all HP Software
    Purchased a Brother Printer
    Loaded Brother Software and all is well
    Put the HP Printer and Software in the trash

  • Where to find Net8 Assistant?

    The online document tell me that I can run Net8 Assistant
    in "$ORACLE_HOME/bin/net8asst.sh".But after i install
    oracle 8,when I try to run the scripts,I can't find it!
    Who can tell me what is wrong with it?
    null

    It simply isn't there. The script may be avaiable for other Unix
    systems like Solaris and/or AIX. But why do you need it anyway? I
    simply edit the tnsnames.ora and listener.ora by hand.
    Robert XU
    LinChunyi (guest) wrote:
    : The online document tell me that I can run Net8 Assistant
    : in "$ORACLE_HOME/bin/net8asst.sh".But after i install
    : oracle 8,when I try to run the scripts,I can't find it!
    : Who can tell me what is wrong with it?
    null

  • ORA-12154 & ORA-12514 errors with Net8

    Can anyone help me with getting Net8 to run?
    On 8.0.5 I was able to get my Windows front-ends to run using the "0-Configuration" option for Net8 - using Host Names.
    I have been roundly unsuccessful in trying to get this to work with 8i, and now I am deeply embroiled in TNSNAMES configuration with total lack of success and ever increasing frustration.
    Has anyone successfully overcome this type of error with 8i to successfully access the database from a Windows client?

    John,
    Apologies for the cyber-silence. I only get to work on this stuff evenings and weekends, and this weekend was work instead :-(
    As this whole area of network and database configuration is one of ritual and superstition for me, rather than clinical science I decided to go back in time and re-install 8.0.5 - which works fine for the Host Naming approach. I grabbed the listener.ora and tnsnames.ora (yes, I know it doesn't apply - but, as I said, I'm superstitious) and brought them back to the present (changing a couple of things where necessary - e.g. 8.0.5 => 8.1.5).
    Unfortunately that didn't work either. Then I recreated my 8i database and made the global db name and instance name exactly the same as the hostname. This time it worked! Not a very general solution (and I have no idea which part of the solution cracked it or me) but I am sticking with it for now!
    Just for the record here are the new (old?) configuration files:
    sqlnet.ora:
    SQLNET.EXPIRE_TIME = 0
    NAMES.DIRECTORY_PATH= (HOSTNAME)
    SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
    listener.ora:
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = baloo))
    (PROTOCOL_STACK =
    (PRESENTATION = TTC)
    (SESSION = NS)
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
    (PROTOCOL_STACK =
    (PRESENTATION = TTC)
    (SESSION = NS)
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = baloo.housden.net)(PORT = 1521))
    (PROTOCOL_STACK =
    (PRESENTATION = TTC)
    (SESSION = NS)
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = baloo.housden.net.)
    (ORACLE_HOME = /u2/app/oracle/product/8.1.5)
    (SID_NAME = baloo)
    (SID_DESC =
    (SID_NAME = extproc)
    (ORACLE_HOME = /u2/app/oracle/product/8.1.5)
    (PROGRAM = extproc)
    tnsnames.ora:
    ORCL_BEQ =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = BEQ)(PROGRAM = /u2/app/oracle/product/8.1.5)
    (argv0 = oraclebaloo)
    (args = '(DESCRIPTION = (LOCAL=YES)(ADDRESS=(PROTOCOL=BEQ)))')
    (envs = 'ORACLE_HOME=/u2/app/oracle/product/8.1.5,ORACLE_SID=baloo'))
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(Host = baloo.housden.net)(Port = 1521))
    (CONNECT_DATA =
    (SID = baloo)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = baloo))
    (CONNECT_DATA =
    (SID = extproc)
    BTW - in other posts on this forum you keep whingeing about your job. Are things still that bad Down Under that there are no suitable alternatives there? I was hoping to return to the Lucky Country some time soon, but I want to be sure that the economy and job market is viable first. Anyway, thanks for your help and Good Luck!

  • Pb with migration assistant

    Hello,
    I try to install a new Macbook Pro with Migration Assistant.
    I connect the Ethernet cable between macbook pro Lion (Source) and macbook pro Lion (Target) and i start.
    When i arrived on the screen Transfer Information to this Mac, i select "From another Mac" and i launch Migration assistant in the source.
    The target view the source but source can't view target.
    I have always "looking for another computer" and nothing.
    Thanks for your help.

    Hi,
    Sorry for my mistake with Pb, I'm frenchman and it's the first time I write a post..And sorry if my english is not correct... If you understand me...it's perfect
    So, in the Pondini's Setup New Mac,(thank you very munch for that) he wrote :
    Usually, the best way is to use Setup Assistant, when you first start up your new Mac.  It will set the new Mac up just like the old one:  all configuration, settings, users and data, and all applications (except newer versions already installed).
    I make that, but nothing.
    So I select "Do not transfer the know", and when I created the user, I do not choose the same as the source, otherwise there are a problem with migration assistant. and after, I used Migration Assistant to install all applications, configurations...But I think it isn't normal.
    Today, i will  try to install a new Mac with Time Machine. 
    Thanks for your help

  • No Image - 1473R With Vision Assistant

    Hopefully this is a simple fix and I'm missing something very obvious, so here is what's up. I'm originally a text programmer but for this project I'm stuck using LabVIEW which is completely unfamiliar; I've been working on this for days with no progress so I thougt I'd see if anyone had some pointers. The goal of the project is to use the PCIe-1473R FPGA to do live gain control, overlay, and maybe some recognition.
    I started with the "Image Processing with Vision Assistant on FPGA" example and made a few simple changes to just attempt to get a video feed through. The camera we are using is a Pulnix TM 1325 CL, which outputs a 1 tap/10 bit Camera Link signal. Since this example VI is originally configured 1 tap/8 bit I changed the incoming pixel to be read as 1 tap/10 bit and compiled and tested. When I try to start video acquisition I get no errors but no frames are grabbed. The frame's acquisitioned count does not increase and nothing is displayed. If I switch to line scan I get a scanning static image, but this is not a line scan camera and my other NI frame grabber card shows an image from the camera fine.
    I wasn't all that surprised with this result, as the input is 10 bit and the acquisition FIFO and DMA FIFO are both 8 bit orginally. So, I changed them to U16 and also changed IMAQ FPGA FIFO to Pixel Bus and IMAQ FPGA Pixel Bus to FIFO blocks on either side of the Vision Assistant to U16. With this configuration, I again get no image at all; same results. I suspect this is because the incoming image is signed, so the types should be I16 instead. However, there is no setting for I16 on the Pixel Bus conversion methods. Am I not understanding the types happneing here or is there an alternative method for using Vision Assistant with signed images? I'd think it'd be odd not have support for signed input.
    Anyway, I've tried all the different combos of settings I can think of. Does anyone have any input? I feel like it must be either a buffer size problem or a signing problem, but I don't really know. Any and all input is welcome!
    Thanks for helping out a new guy,
    Kidron

    I ended up resolving this issue by switching cameras. The end goal was to use a FLIR SC6100, so I switched to it and was able to get things working shortly. The FLIR does use unsigned ints, so I believe that's what resovled the issue for anyone running into this in the future.

  • PGW2200 configuration with AS5350

    I am new to this product i need to know what are the basic steps for PGW2200 to configure with AS5350 where AS5350 will be connected to SS7 network for F-link.
    Also from where i can get Cisco Media Gateway Controller Software.
    Regards
    also can any one tell me how to monitor PGW220 is their any GUI tool avalbe for easy configuration & monitoring .
    Regards

    Sohail,
    it's not that I don't want to give you the steps, but PGW is very complex in term of configuration. My suggestion to you is to first check if you have the minimum requirements for SS7 interconnection in your company: do you have a designated POint Code for example?
    The following manual is very helpful about configuration:http://www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/provisioning/guide/prvgde.html
    but I suggest that if you are not very familiar with this, you should get a Cisco Partner to assist you. PGW also depends on what region you are since SS7 have different "flavors" for interconnections in terms of protocol.
    Unfortunatly we can't assist you directly but you can try companies like Promon / Logicallis in Latin America or like Dorotel in Miami.
    Regards,
    Daniel

  • Linear encoders with Motion Assistant

    Hello,
    I recently ordered some SIKO MSK5000 linear encoders ( http://www.sikoproducts.com/viewProduct.cfm?productID=MSK5000 ) for a stepper motion application.  I hooked one up as a test and according to the status LEDs it worked but Motion Assistant (1.3) seemed to not pick it up.  Then I realized that I am not even sure what motion assistant should be doing!  I can't find in the documentation what exactly should happen when I hook up an encoder so could someone help me out?  We want to make sure they work before installing them (which will require lots of disassembly.)
    Thanks!
    Relevant hardware:
    PCI-7334
    MID-7604

    Hello,
    Hopefully I can get you going with with Motion Assistant.  Basically the Motion Assistant is software that allows you to easily develop and test a motion control program through a fairly straight-forward API.  You can create a set of moves, called a script, one step at a time to see the cumulative effects of these steps.  This script can then be converted into LabVIEW code or several different text-based programming codes.  Before you begin using the Motion Assistant, however, you need to configure you motor setup in Measurement and Automation Explorer (MAX).  In MAX you setup the properties of your specific motor, encoder, limit switches, control style, etc.  Below is a link to a Motion Fundamentals tutorial on ni.com, and I believe the Configuration section should help you through configuring you motor in MAX.
    http://zone.ni.com/devzone/conceptd.nsf/webmain/722ECF56222AAD5086256F7B007072C4?opendocument&node=1...
    This link has a good tutorial on the Motion Assistant itself:  http://www.ni.com/swf/presentation/us/motion/.  Hope this helps.
    Jason N

  • I changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password

    i changed my sim on my iPhone n reconfigured iMessage, it configured with my number but when i sign in with my apple id it says username/password is wrong while in all other things like FaceTime, App Store it worked with the same id and password..
    can anyone help me to solve this issue

    i just opened my ipad, started my apple account/I.D. and realized I put the wrong e mail. I was having trouble correcting my I.D on the Ipad so I went to my laptop and make the proper changes/slash e mail address I wanted for my apple ID. I got back to my ipad and try to download an app I can't because I have to sign in my apple account and I can't because it still has the irrelivant I.D/email address..
    So, i did what you said.. went to setting>app store> tapped on my e mail.. it asked me to sign in (with my invalid emails address showing). I signed in with the password I had created. It said "incorrect".. I went to reset password. I reset password, tried to sign in and it says again "unvalid password".. this is getting irritating.  I have been asking and no one knows what to do.

  • I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    I have a problem with Mail on my Macbook Pro. It is configurated with a gmail account, and now I can't access the mail. Is it possible to reboot the account or..? Please help:)

    The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
    You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

  • I am having problems with migration assistant (windows pc to Mac 2011) When I get to the 'Quit other applications' box and click continue, nothing happens. There are no other apps running - any ideas, please?

    I am having probems with migration assistant. Trying to transfer data from a windows laptop to iMac 2011. It was working fine when I did the set-up yesterday, but it was going to take hours to transfer some videos so I quit the process with the intention of doing it again at a later stage. However today I find that everytime I get to the 'Quit other applications' box on the Mac and click 'continue', nothing happens. Have checked mission control and confirmed no other apps running. Tried several times with the same result every time. Migration Assistant running on my laptop with the 'Waiting for mac to connect' box displayed. Mac is connected to wi-fi OK as able to use Safari and access internet. Any ideas, please?

    Thanks for your suggestions. Have managed to get Migration Assistant working but now have a new problem, i.e. where does it save the transferred files?!! Searched a few forums and it seems it saves it under your old username, or suchlike. Anyway I tried logging on as a new user using my old user name but there were only a handful of files there, couldn't locate the majority of stuff from my old laptop. Anyway I don't intend to go through any more hoops with MA - will just save the important stuff to an external drive and transfer it that way. Not impressed with MA at all. I thought it was supposed to be a user-friendly tool to simplify the transfer from pc to Mac - not my experience, I'm afraid!

Maybe you are looking for