Probook 450 and hybrid hdd Toshiba

Does it compatible: HP Probook 450 (h6r43ea) and hybrid HDD Toshiba MQ01ABFxxxH (MQ01ABF050H) ?

Hi tempo13,
I understand that you are looking for a compatible external HDD. I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
I hope this helps.
I worked on behalf of HP.

Similar Messages

ProBook 4730s with Hybrid HDD

Good Afternoon!
I'm just about to buy a HP ProBook 4730s and i'm wanting to swap the HDD with one of the new HDD SDD Hybrid drive (Link).
From looking at the spec's I cannot see a problem with this, I just want to make sure with you guys who really know what they are talking about think the same as me.

Hi tempo13,
I understand that you are looking for a compatible external HDD. I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
I hope this helps.
I worked on behalf of HP.

Probook 450 G1 HDD strange noise

Hello,
I've bought my probook 450 G1 less than a week ago and I've noticed that the HDD is producing annoying noise, similar to scrathing even when there is no extensive ative accessing of HDD from my side, and I believe an occasional clicking sound.
I am not sure, if this is normal for a 5 day old computer.
This is the sound it produces (plus the light scrathing sound): http://picosong.com/Ctpv/
Any help would be highly appreciated!

Hello giannislol,
To get your issue more exposure I would suggest posting it in the commercial forums since the Probook 450 G1 is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime:
HP ProBook 450 G1 Notebook PC.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Just installed on a HP ProBook 450 G0 laptop and the menu, tab etc. dont work, although I do get a www site when I type it in.

Just installed on a HP ProBook 450 G0 laptop and the menu, tab etc. dont work, although I do get a www site when I type it in. It's very strange, almost like the left click doesnt work on the scratchpad (although it's not that as using keystrokes also fails). OS is Windows7 Pro 64. Tested both Chrome and IE and they work fine.

Hello scavens,
Thank you for contacting Mozilla Support. Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Can't adjust the brightness of my hp probook 450 G0 with FN+ f9 and f8

i have hp probook 450 G0 and i am finding the solution to adjust the brightness of my laptop by using F keys...i have installed all the drivers of my latop and i am using win 8.1 32-bit ..plz help..urgennt solution...before this i was using win 8.1 64 bit but this option worked...so plz help

Hi:
Make sure under the display adapters category that you see the name(s) and model number(s) of the graphics adapters listed there.
If you see a graphics device labeled Microsoft Basic Display Adapter, the applicable graphics driver was not installed.
You also need to install the Intel chipset installation utility and reboot before installing the graphics driver.
Not having the chipset and graphics drivers installed are the most likely reasons you cannot adjust the screen brighness (it is stuck on maximum).

Windows 7 Ultimate x64 BOOT Failure on HP ProBook 450 G1...

Dear forum viewes and experts...
I hope you can provide me with your insights on this problem i am having...
I bought a new laptop HP ProBook 450 G1 (i5 4200M, 8GB RAM, 1TB HDD, 2GB ATI Graphics card). The laptop comes with DOS free operating system.
I installed Windows 7 Ultimate from ISO file on a USB stick, and then activated the Windows.
After updating all drivers and having a clean device manager with no hardware left as unknown, i figured out that the laptop fails to make a cold BOOT.
After several trials, and installations. the problem remained the same. I changed the installation to Windows 8.1 Pro and the problem remained the same.
On cold booting, the laptop after showing HP logo in start-up starts to show Windows Logo animation but in Super Slow Motion for about 6-8 minutes, then followed by strange sounds which force me to shut it down by pressing power button for long until it shuts down.
After huge number of trail and error, i found out that if I entered BIOS Setup (by pressing esc then F10) and then exiting it without doing any changes or even without saving, the Laptop boots Windows 7 very smoothly (in about 15-18 seconds) and works fine. it also can make endless number of smooth restarts without any problem.
If it is shut down then turned on, the boot failure is the outcome.
The only way to make a successful cold BOOT (i.e after a shut down) is to enter BIOS setup mode (by pressing esc then F10), then exiting it within seconds without changing anything or saving, then it boots smoothly.
I tried MBR fixes through command prompt in Recovery Mode, I tried to change booting to make it boot as LEGACY or UEFI Hybrid. The BIOS is updated to the latest frimware on HP website verion 1.2 dated 15 July 2014.
NO HELP.....All lead to the same disappointing result.
Any idea whether this is a hardware issue/software issue/BIOS issue?
Your insights will be highly appreciated

Hello,
I'd ask in the
Windows 7 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

HP Probook 450 G1 Boot Failure....!!

Dear forum viewes and experts...
I hope you can provide me with your insights on this problem i am having...
I bought a new laptop HP ProBook 450 G1 (i5 4200M, 8GB RAM, 1TB HDD, 2GB ATI Graphics card). The laptop comes with DOS free operating system.
I installed Windows 7 Ultimate from ISO file on a USB stick, and then activated the Windows.
After updating all drivers and having a clean device manager with no hardware left as unknown, i figured out that the laptop fails to make a cold BOOT.
After several trials, and installations. the problem remained the same. I changed the installation to Windows 8.1 Pro and the problem remained the same.
On cold booting, the laptop after showing HP logo in start-up starts to show Windows Logo animation but in Super Slow Motion for about 6-8 minutes, then followed by strange sounds which force me to shut it down by pressing power button for long until it shuts down.
After huge number of trail and error, i found out that if I entered BIOS Setup (by pressing esc then F10) and then exiting it without doing any changes or even without saving, the Laptop boots Windows 7 very smoothly (in about 15-18 seconds) and works fine. it also can make endless number of smooth restarts without any problem.
If it is shut down then turned on, the boot failure is the outcome.
The only way to make a successful cold BOOT (i.e after a shut down) is to enter BIOS setup mode (by pressing esc then F10), then exiting it within seconds without changing anything or saving, then it boots smoothly.
I tried MBR fixes through command prompt in Recovery Mode, I tried to change booting to make it boot as LEGACY or UEFI Hybrid. The BIOS is updated to the latest frimware on HP website verion 1.2 dated 15 July 2014.
NO HELP.....All lead to the same disappointing result.
Any idea whether this is a hardware issue/software issue/BIOS issue?
Your insights will be highly appreciated

Can you post a screenshot with the PCI\VEN hardware ids of the bluetooth device? The image below shows an example of what we need to identify the device properly.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My HP Probook 450 G0 fingerprint reader is not working WIndows 7

Hello,
I am trying to enable my HP Probook 450 G0 fingerprint reader.... I tried many driver version of validity sensor... and finally i have currently installed the driver and software that are mentioned in following link....
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/DV4-1240br-FingerPrint-Driver-f...
Both are them working fine (**without any error) But DigitalPersona is showing me the following message on welcome screen.... "The FingerPrint reader is not connected.Connect the reader"....
OS : Windows 7 Professional
What do you say.....is there any compatibiltiy issue or any hardware issue....or if there any driver mismatch, can someone suggest me the supported driver version....
Thanks in Advance

I have the same problem as the original poster, and followed the download link you provided only to encounter the exact same issue. I am using Windows 7 and bought this machine two days ago. I don't understand why this singular process is this problematic. I really miss my ASUS K53E and it's face logon feature.
Perhaps HP should take lessons unless they have something better than this "fingerprint reader." The only consistent feature I am detecting is its inconsistancy. Oh well, I just won't bother using it, or put a sticker over the thing.
If I have to spend more than an hour troubleshooting a feature of medium to low importance then it was a mistake to purchase the machine (but it was a gift sadly), and it was a mistake to implement the feature and release it without making sure it works. Pretty weak HP, but not as bad as Toshiba or Gateway/Acer at least--not that it says much.
Anyone have a legit fix for this annoying issue? Or some third party facial recognition login program instead?

Problem with Display card of Probook 450 G1

Hello
I have just bought Hp probook 450 G1 and i have installed all mandatory drivers from HP site , but now i am facing a problem with the display cards .I tried it n PES 13 Game , it says that my device is not apprpraite , also it reads the AMD card ram as 32 MB and says its unable , also that happens with intel card.

Hello @Captiano ,
Thanks for posting on the HP Forums!
I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
Have a wonderful day!
Mario
I worked on behalf of HP.

Unable to Install Win 8 in Probook 450 G2

I bought a new note book of HP Probook 450 G2 with Free DOS installed by factory. I am quite familier with DOS, Partitions & technical staff. I purchased this Probook 450 G2 becase of its beautifull design & specs, Its price suite me so I purchased it without Windows installed.
So after getting it I tried to install Windows 8 Pro via a USB Boot Installation but I got stuck at selecting Pratition to where it would be installed. It has 1 TB Hard dics drive.
I deleted all partitions --- >> Unallocated 1 TB
created single partition of 1TB ----> Created Partition 1 Size = 1TB
Clicked to Install Windows in it ---- > Error ( We couldn't create a new partition or locate an exiting one )
Then tried Again !
I deleted all partitions --- >> Unallocated 1 TB
created single partition of 200GB ----> Created Partition 1 Size = 200GB
Clicked to Install Windows in it ---- > Error ( We couldn't create a new partition or locate an exiting one )
Then tried Again !
Put Win 98 CD and Run FDISK ( The old way -> Low Level Format )
created single primary dos partition of 500GB ----> Created Partition 1 Size = 500GB
It took 12 Hours to complete above process " Verifying Device Intergity ..... "
After 12 Hours of completion I said to restart & farmat C:
After restart at started Win 98 with CD support ..
reached Command Prompt : FORMAT C: /Q
Error : Media Not found
This HP Probook is purchased 2 days back.
If anyone know how to resolve this issue.
Help will be appreciated.

You're very welcome.
Sometimes strange things happen.
The error messages don't always match up with the real problem.
It sounds like Windows can't find the drive and when it can't find the drive that normally means the applicable sata driver needs to be installed.

I want to use finger print on HP Probook 450 G1 .. Windows 8.1 Pro

Please help me i just Bought HP probook 450 g1 .. and i installed the validity fingerprint sensor succesfully but i don't know how to use the finger print or where i can find it .. i downloaded simplepass .. tha black virsion and i couldn't understand any thing .. and l keeps telling me '' Simplepass can use your windows pass word to log on'' and whenever i write it .. the program tells me .. the password you enterd doesn't match .. and i tried to install HP Client Security Manager .. i keep telling me that ERROR 1001 .. i i want to do is the use the fingerprint ... is that possible in that laptop .. i think i'm going to die

Amr-Zero,
No dying!
As far as I know, your computer is not going to run SimplePass -- it wants to run the HP Client Security Manager.
There are some prerequisites as listed on the System Requirements page. Amongst these: the File Sanitizer Software, both .NET framework 3.5 and 4.5, and others. It is likely that your system has all the necessary software, although you may not have installed the File Sanitizer yet. It is available from your computer's driver page.
If you do not yet have .NET Framework 4.5, you can download install .NET Framework 4.5.1: Microsoft .NET Framework 4.5.1
It is of vital importance that you have all your Windows Updates in place. Make sure they are indeed complete. If you are one of the people in the world that do not believe in Windows Updates, turn them off later -- this is not the time.
HP ProBook 450 B1 Notebook Drivers - Windows 8.1
You need to remove and banish that SimplePass software from the system.
Control Panel > icon view > Programs and Features > find and remove the SimplePass software
Next:
Create a Restore Point Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and Shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The Hard Reset procedure does not wipe out your files nor does it destroy your Windows setup in any way. It just "clears the cobwebs". Depending on the cause of the problem, this kind of "reset" can fix a variety of computer glitches.
==========================================================================
Unfortunately, this is the extent of my knowledge on the subject. You have a "business" computer and this is "business" software. I perfectly understand that YOU might be just someone sitting in your house somewhere on the planet -- it is the COMPUTER and the SOFTWARE that is the difference here.
There is a White Paper on the subject in your Manuals section -- it is useful if you have some background in the subject at all.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

Cannot install OS X Lion after new seagate hybrid HDD install

I just installed new seagate hybrid hdd (STBD1000400) in my early 2011 13" Mac Book Pro after stock drive failed;
formatted it as mac os extended (journaled);
downloaded lion installer and copied it to external with OS X Lion bootable drive;
started computer from external drive;
ran lion installer;
"Install Failed: OS X could not be installed on your computer. OS X can't be installed on the disk (null) because a recovery system can't be created. Visit www.apple.com/support/no-recovery to learn more"
I reduced partition size and same error. Any suggestions

Remove the SSd from inside the case and connect it to that same Mac with a SATA to USB adapter, one that has its own AC power supply (Not a USB BUS power adapter), and try to install Lion on it.
I am suspecting the cable that goes from the drive to the logic board is faulty which is very common.
If the drive works fine outside the system, IE you can install Lion on it and it creates the Recovery HD partition and you can boot and run the system from it then is is more than likely the cable.
One other thing to do is after you Repartition the drive in disk utility grab the bottom right hand corner of the partition layout area and drag it up a little shrinking that partition by a couple of 100MBs to 1-2GBs and try the install again.
There was a bug in some Macs that for some reason with the whole drive included in the primary partition the OS X installer couldn't create a Recovery HD. You don't have to create a second partition, you can just leave it as Free Unpartitioned space. If you can then successfully install Lion you can then Drag the corner back down to put the free unpartitioned space back into the main partition.

Is Probook 450 G1 support Ubuntu??

Is my Probook 450S G1 compatible with Ububtu latest version? I want to install Ubuntu in my laptop. I heared this is not support Ubuntu.

@shahriyar31
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Action Keys Mode on ProBook 450?

Is the option to reverse the F1-F12 function keys (''Action Keys Mode'') available in ProBook 450's BIOS?
And if not, do you have to press for example Fn+F4 to use F4?
Thanks.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
I worked on behalf of HP

Lenovo C255 - USB Drive and USB HDD is not recognized

Hi
I am trying to attach SSD (Kingston SSDnow 300 - 60gb) drive to PC via bridge SATA-USB to USB 3 port, so i have "USB to ATA/ATAPI Bridge" stuff at installed devices and no HDD disks appeared at MyComputer . Still i have 2 disks at Device manager - my native HDD and this USB Drive.
The problem is that BIOS doesn't see any USB HDD. Excluded from the bootable device : USB HDD USB CDROM.
So how i can solve this issue ?

Hi
I will try to help you buddy.
> When it is started is says "Insert system disk in drive. Press any key when ready
This message appeared on my notebook after the HDD has died.
I had to replace the HDD and to install the OS again.
I assume its the same problem with your notebook. The HDD is not present or not recognized and you have to install a compatible HDD to get the OS running.
I have googled a little bit and found out that this notebook was delivered with the 10GB Toshiba MK1016GAP HDD. It supports the ATA-2/ATA-3/ATA-4/ATA-5 interface.
Please note that many BIOS have an HDD size limitation. This means that not all HDD sizes are supported! I presume a 20GB should be compatible but this is only my own opinion
> How can I change my BIOS so that the HDD is recognized?
The BIOS cannot be changed apart from the update (check Toshiba driver page -> Archive -> Satellite Archive).
But vary important is that you will use a compatible HDD.
> Can anybody help me with the recovery CD?
Dont know if you will be able to order this CD from the authorized service provider in your country because the notebook is really an oldie. But you should ask the guys.
What you could is to install the OS from the Microsoft CD and then could install some necessary drivers.
Greetings

Probook 450 and hybrid hdd Toshiba

Similar Messages

Maybe you are looking for