Probook 450 g1 drivers problem

i upgrade my windows 8.1 to 10 after upgrade i face aproblem in my amd card causes"internal_powe_error"i remove amd driver and update driver from windows update and it run with know problem but switchable graphic modenot workingi go to support center from this link: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4192 and i couldn't find any graphic drivers for my probook 450 g1 when hp fully support new windows to my probook 450 g1?if thier is asolution to solve switchable graphic please tell me?

As a long time Windows 10 tester, I have found by and large that the Windows 8.1 drivers will work, albeit sometimes in a limited fashion. So if you're running the Intel 4600 Graphics chip, use the Windows 8.1 drivers, they will work.

Similar Messages

HP Probook 4530s Bluetooth drivers problem

Hi, I need some help. I want to know if my laptop is equipped with a bluetooth adaptor.
I'm running Windows 7 Home Premium 64-bit, and these are the specifications:
HP ProBook 4530s Notebook PC (ENERGY STAR)
Serial Number: {Private Information Removed}
Product Number: A7K05UT
On device manager there is no Bluetooth Radio or any other bluetooth device.
I wanted to know if this is happening due to a driver problem cause I recently installed all available network drivers for my laptop, and i wondered if something is malfunctioning (which it's not probable because my wireless adaptador is working fine).
Thanks!

Hi,
The following link shows its specs:
http://h10010.www1.hp.com/wwpc/ca/en/sm/WF06b/321957-321957-64295-3955552-3955552-5060880-5215017.ht...
No, it does not have BT. Quick and cheapr option is to buy an USB-BT device.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hp probook 450 g1 drivers on win 10

I can not find the all drivers for win 10. they are not complete

Same here, but I can't get out of an error Internal_Power_Error. I installed AMD drivers for Win10 and after that I can't start Windows properly anyway. Keeps going to the same error code. PLEASE HELP!

HP Probook 450 G2 drivers

I've noticed that the support page for drivers have been updated recently. As it turns out a lot of drivers aren't available anymore. One of which is the correct driver to install the USB ports. Anyone knows where I can still find the correct drivers for the USB ports? A lot of the old posts seem to result into a dead end.

HP is updating the drivers list daily, Please be patient.They'll put all the necessary updated drivers within a few days.

After win 10 upgrade my probook 450 g1 graphics drivers problem

After i upgrade my os to win 10 the graphic driver has a problem my laptop is probook 450 g1 please support the new windows quickly

As a long time Windows 10 tester, I have found by and large that the Windows 8.1 drivers will work, albeit sometimes in a limited fashion. So if you're running the Intel 4600 Graphics chip, use the Windows 8.1 drivers, they will work.

Problem with Display card of Probook 450 G1

Hello
I have just bought Hp probook 450 G1 and i have installed all mandatory drivers from HP site , but now i am facing a problem with the display cards .I tried it n PES 13 Game , it says that my device is not apprpraite , also it reads the AMD card ram as 32 MB and says its unable , also that happens with intel card.

Hello @Captiano ,
Thanks for posting on the HP Forums!
I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
Have a wonderful day!
Mario
I worked on behalf of HP.

Windows 8.1 ATI Radeon 8750M Drivers For Probook 450 G1

I installed windows 8.1 into my Probook 450 G1 and I could not find any ATI Radeon 8750M drivers to it. The windows 8 drivers are not working properly in windows 8.1 .
This question was solved.
View Solution.

Try drivers from here:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5405422&spf_p... - Graphics
ELSE
Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Graphic Drivers for ProBook 450 G1

Recently I updated my windows to Windows 10. First there was an issue with startup of the windows. I solved the issue according to the way given on the forum here (deleting driver in safe mode). My laptop was working properly until now, the AMD Driver and the Intel HD drivers are not working. And I can't find any drivers on the HP Website online. My laptop is HP ProBook 450 G1Kindly help me!

Try drivers from here:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5405422&spf_p... - Graphics
ELSE
Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Windows 7 Ultimate x64 BOOT Failure on HP ProBook 450 G1...

Dear forum viewes and experts...
I hope you can provide me with your insights on this problem i am having...
I bought a new laptop HP ProBook 450 G1 (i5 4200M, 8GB RAM, 1TB HDD, 2GB ATI Graphics card). The laptop comes with DOS free operating system.
I installed Windows 7 Ultimate from ISO file on a USB stick, and then activated the Windows.
After updating all drivers and having a clean device manager with no hardware left as unknown, i figured out that the laptop fails to make a cold BOOT.
After several trials, and installations. the problem remained the same. I changed the installation to Windows 8.1 Pro and the problem remained the same.
On cold booting, the laptop after showing HP logo in start-up starts to show Windows Logo animation but in Super Slow Motion for about 6-8 minutes, then followed by strange sounds which force me to shut it down by pressing power button for long until it shuts down.
After huge number of trail and error, i found out that if I entered BIOS Setup (by pressing esc then F10) and then exiting it without doing any changes or even without saving, the Laptop boots Windows 7 very smoothly (in about 15-18 seconds) and works fine. it also can make endless number of smooth restarts without any problem.
If it is shut down then turned on, the boot failure is the outcome.
The only way to make a successful cold BOOT (i.e after a shut down) is to enter BIOS setup mode (by pressing esc then F10), then exiting it within seconds without changing anything or saving, then it boots smoothly.
I tried MBR fixes through command prompt in Recovery Mode, I tried to change booting to make it boot as LEGACY or UEFI Hybrid. The BIOS is updated to the latest frimware on HP website verion 1.2 dated 15 July 2014.
NO HELP.....All lead to the same disappointing result.
Any idea whether this is a hardware issue/software issue/BIOS issue?
Your insights will be highly appreciated

Hello,
I'd ask in the
Windows 7 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

HP Probook 450 G1 Boot Failure....!!

Dear forum viewes and experts...
I hope you can provide me with your insights on this problem i am having...
I bought a new laptop HP ProBook 450 G1 (i5 4200M, 8GB RAM, 1TB HDD, 2GB ATI Graphics card). The laptop comes with DOS free operating system.
I installed Windows 7 Ultimate from ISO file on a USB stick, and then activated the Windows.
After updating all drivers and having a clean device manager with no hardware left as unknown, i figured out that the laptop fails to make a cold BOOT.
After several trials, and installations. the problem remained the same. I changed the installation to Windows 8.1 Pro and the problem remained the same.
On cold booting, the laptop after showing HP logo in start-up starts to show Windows Logo animation but in Super Slow Motion for about 6-8 minutes, then followed by strange sounds which force me to shut it down by pressing power button for long until it shuts down.
After huge number of trail and error, i found out that if I entered BIOS Setup (by pressing esc then F10) and then exiting it without doing any changes or even without saving, the Laptop boots Windows 7 very smoothly (in about 15-18 seconds) and works fine. it also can make endless number of smooth restarts without any problem.
If it is shut down then turned on, the boot failure is the outcome.
The only way to make a successful cold BOOT (i.e after a shut down) is to enter BIOS setup mode (by pressing esc then F10), then exiting it within seconds without changing anything or saving, then it boots smoothly.
I tried MBR fixes through command prompt in Recovery Mode, I tried to change booting to make it boot as LEGACY or UEFI Hybrid. The BIOS is updated to the latest frimware on HP website verion 1.2 dated 15 July 2014.
NO HELP.....All lead to the same disappointing result.
Any idea whether this is a hardware issue/software issue/BIOS issue?
Your insights will be highly appreciated

Can you post a screenshot with the PCI\VEN hardware ids of the bluetooth device? The image below shows an example of what we need to identify the device properly.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I want to use finger print on HP Probook 450 G1 .. Windows 8.1 Pro

Please help me i just Bought HP probook 450 g1 .. and i installed the validity fingerprint sensor succesfully but i don't know how to use the finger print or where i can find it .. i downloaded simplepass .. tha black virsion and i couldn't understand any thing .. and l keeps telling me '' Simplepass can use your windows pass word to log on'' and whenever i write it .. the program tells me .. the password you enterd doesn't match .. and i tried to install HP Client Security Manager .. i keep telling me that ERROR 1001 .. i i want to do is the use the fingerprint ... is that possible in that laptop .. i think i'm going to die

Amr-Zero,
No dying!
As far as I know, your computer is not going to run SimplePass -- it wants to run the HP Client Security Manager.
There are some prerequisites as listed on the System Requirements page. Amongst these: the File Sanitizer Software, both .NET framework 3.5 and 4.5, and others. It is likely that your system has all the necessary software, although you may not have installed the File Sanitizer yet. It is available from your computer's driver page.
If you do not yet have .NET Framework 4.5, you can download install .NET Framework 4.5.1: Microsoft .NET Framework 4.5.1
It is of vital importance that you have all your Windows Updates in place. Make sure they are indeed complete. If you are one of the people in the world that do not believe in Windows Updates, turn them off later -- this is not the time.
HP ProBook 450 B1 Notebook Drivers - Windows 8.1
You need to remove and banish that SimplePass software from the system.
Control Panel > icon view > Programs and Features > find and remove the SimplePass software
Next:
Create a Restore Point Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and Shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The Hard Reset procedure does not wipe out your files nor does it destroy your Windows setup in any way. It just "clears the cobwebs". Depending on the cause of the problem, this kind of "reset" can fix a variety of computer glitches.
==========================================================================
Unfortunately, this is the extent of my knowledge on the subject. You have a "business" computer and this is "business" software. I perfectly understand that YOU might be just someone sitting in your house somewhere on the planet -- it is the COMPUTER and the SOFTWARE that is the difference here.
There is a White Paper on the subject in your Manuals section -- it is useful if you have some background in the subject at all.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

Unable to use HP Probook 450 G2 Fingerprint feature

I purchased a HP Probook 450 G2 with free dos version yesterday. I successfully installed windows 8.1 pro on it with all HP drivers from the site. But apparently, HP drivers web page for my probook doesn't offer me with "simplepass"software for the finger print feature. So, I downloaded it from a third party webpage. I checked from BIOS and the fingerprint option is enabled, I have also installed the validity sensor driver and no matter what I simply don't get any "finger print"option on the program (Simplepass), all they show is "PIN or CHARACTER Pass" and nothing else. Similarly, on the "SIGN IN"option of the windows, they don't show any fingerprint options for security. All my drivers are updated. Validity sensor driver is 4.5.133.0, SimplePass is of 2015. I am starting to give up because I have googled as much I could and tried all the safest approach, still didn't work. Someone help? Thank You in advance.

Please check in the Device Manager and make sure you see the Validity Fingerprint Sensor in BIOMETRIC as shown in the below picture If you find Validity Fingerprint Sensor in Device manager, please click on the below link to download and install the complete Suitehttp://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_138571_1&swEnvOid=4158# Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84Although I am an HP employee, I am speaking for myself and not for HP

Probook 450 GPU temp

Hi, I recently bought a Probook 450 G2 with an AMD Radeon R5 M255 GPU and there's something strange about it. Whenever I open Speccy or GPU-Z, the temperature of the GPU is displayed as 511 degrees Celsius doing absolutely nothing. That's pretty much impossible without bursting into flames, but what can be the cause of this problem? I have already re-installed the drivers, making sure that I had the newest drivers. I even re-installed Windows. Nothing works. Help! AWeijs

Hello Cw91,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

My HP Probook 450 G0 fingerprint reader is not working WIndows 7

Hello,
I am trying to enable my HP Probook 450 G0 fingerprint reader.... I tried many driver version of validity sensor... and finally i have currently installed the driver and software that are mentioned in following link....
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/DV4-1240br-FingerPrint-Driver-f...
Both are them working fine (**without any error) But DigitalPersona is showing me the following message on welcome screen.... "The FingerPrint reader is not connected.Connect the reader"....
OS : Windows 7 Professional
What do you say.....is there any compatibiltiy issue or any hardware issue....or if there any driver mismatch, can someone suggest me the supported driver version....
Thanks in Advance

I have the same problem as the original poster, and followed the download link you provided only to encounter the exact same issue. I am using Windows 7 and bought this machine two days ago. I don't understand why this singular process is this problematic. I really miss my ASUS K53E and it's face logon feature.
Perhaps HP should take lessons unless they have something better than this "fingerprint reader." The only consistent feature I am detecting is its inconsistancy. Oh well, I just won't bother using it, or put a sticker over the thing.
If I have to spend more than an hour troubleshooting a feature of medium to low importance then it was a mistake to purchase the machine (but it was a gift sadly), and it was a mistake to implement the feature and release it without making sure it works. Pretty weak HP, but not as bad as Toshiba or Gateway/Acer at least--not that it says much.
Anyone have a legit fix for this annoying issue? Or some third party facial recognition login program instead?

Unable to Install Win 8 in Probook 450 G2

I bought a new note book of HP Probook 450 G2 with Free DOS installed by factory. I am quite familier with DOS, Partitions & technical staff. I purchased this Probook 450 G2 becase of its beautifull design & specs, Its price suite me so I purchased it without Windows installed.
So after getting it I tried to install Windows 8 Pro via a USB Boot Installation but I got stuck at selecting Pratition to where it would be installed. It has 1 TB Hard dics drive.
I deleted all partitions --- >> Unallocated 1 TB
created single partition of 1TB ----> Created Partition 1 Size = 1TB
Clicked to Install Windows in it ---- > Error ( We couldn't create a new partition or locate an exiting one )
Then tried Again !
I deleted all partitions --- >> Unallocated 1 TB
created single partition of 200GB ----> Created Partition 1 Size = 200GB
Clicked to Install Windows in it ---- > Error ( We couldn't create a new partition or locate an exiting one )
Then tried Again !
Put Win 98 CD and Run FDISK ( The old way -> Low Level Format )
created single primary dos partition of 500GB ----> Created Partition 1 Size = 500GB
It took 12 Hours to complete above process " Verifying Device Intergity ..... "
After 12 Hours of completion I said to restart & farmat C:
After restart at started Win 98 with CD support ..
reached Command Prompt : FORMAT C: /Q
Error : Media Not found
This HP Probook is purchased 2 days back.
If anyone know how to resolve this issue.
Help will be appreciated.

You're very welcome.
Sometimes strange things happen.
The error messages don't always match up with the real problem.
It sounds like Windows can't find the drive and when it can't find the drive that normally means the applicable sata driver needs to be installed.

Probook 450 g1 drivers problem

Similar Messages

Maybe you are looking for