Probook 450 GPU temp

Hi, I recently bought a Probook 450 G2 with an AMD Radeon R5 M255 GPU and there's something strange about it. Whenever I open Speccy or GPU-Z, the temperature of the GPU is displayed as 511 degrees Celsius doing absolutely nothing. That's pretty much impossible without bursting into flames, but what can be the cause of this problem? I have already re-installed the drivers, making sure that I had the newest drivers. I even re-installed Windows. Nothing works. Help! AWeijs

Hello Cw91,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Windows 7 Ultimate x64 BOOT Failure on HP ProBook 450 G1...

Dear forum viewes and experts...
I hope you can provide me with your insights on this problem i am having...
I bought a new laptop HP ProBook 450 G1 (i5 4200M, 8GB RAM, 1TB HDD, 2GB ATI Graphics card). The laptop comes with DOS free operating system.
I installed Windows 7 Ultimate from ISO file on a USB stick, and then activated the Windows.
After updating all drivers and having a clean device manager with no hardware left as unknown, i figured out that the laptop fails to make a cold BOOT.
After several trials, and installations. the problem remained the same. I changed the installation to Windows 8.1 Pro and the problem remained the same.
On cold booting, the laptop after showing HP logo in start-up starts to show Windows Logo animation but in Super Slow Motion for about 6-8 minutes, then followed by strange sounds which force me to shut it down by pressing power button for long until it shuts down.
After huge number of trail and error, i found out that if I entered BIOS Setup (by pressing esc then F10) and then exiting it without doing any changes or even without saving, the Laptop boots Windows 7 very smoothly (in about 15-18 seconds) and works fine. it also can make endless number of smooth restarts without any problem.
If it is shut down then turned on, the boot failure is the outcome.
The only way to make a successful cold BOOT (i.e after a shut down) is to enter BIOS setup mode (by pressing esc then F10), then exiting it within seconds without changing anything or saving, then it boots smoothly.
I tried MBR fixes through command prompt in Recovery Mode, I tried to change booting to make it boot as LEGACY or UEFI Hybrid. The BIOS is updated to the latest frimware on HP website verion 1.2 dated 15 July 2014.
NO HELP.....All lead to the same disappointing result.
Any idea whether this is a hardware issue/software issue/BIOS issue?
Your insights will be highly appreciated

Hello,
I'd ask in the
Windows 7 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

HP Probook 450 G1 Boot Failure....!!

Dear forum viewes and experts...
I hope you can provide me with your insights on this problem i am having...
I bought a new laptop HP ProBook 450 G1 (i5 4200M, 8GB RAM, 1TB HDD, 2GB ATI Graphics card). The laptop comes with DOS free operating system.
I installed Windows 7 Ultimate from ISO file on a USB stick, and then activated the Windows.
After updating all drivers and having a clean device manager with no hardware left as unknown, i figured out that the laptop fails to make a cold BOOT.
After several trials, and installations. the problem remained the same. I changed the installation to Windows 8.1 Pro and the problem remained the same.
On cold booting, the laptop after showing HP logo in start-up starts to show Windows Logo animation but in Super Slow Motion for about 6-8 minutes, then followed by strange sounds which force me to shut it down by pressing power button for long until it shuts down.
After huge number of trail and error, i found out that if I entered BIOS Setup (by pressing esc then F10) and then exiting it without doing any changes or even without saving, the Laptop boots Windows 7 very smoothly (in about 15-18 seconds) and works fine. it also can make endless number of smooth restarts without any problem.
If it is shut down then turned on, the boot failure is the outcome.
The only way to make a successful cold BOOT (i.e after a shut down) is to enter BIOS setup mode (by pressing esc then F10), then exiting it within seconds without changing anything or saving, then it boots smoothly.
I tried MBR fixes through command prompt in Recovery Mode, I tried to change booting to make it boot as LEGACY or UEFI Hybrid. The BIOS is updated to the latest frimware on HP website verion 1.2 dated 15 July 2014.
NO HELP.....All lead to the same disappointing result.
Any idea whether this is a hardware issue/software issue/BIOS issue?
Your insights will be highly appreciated

Can you post a screenshot with the PCI\VEN hardware ids of the bluetooth device? The image below shows an example of what we need to identify the device properly.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problem with Display card of Probook 450 G1

Hello
I have just bought Hp probook 450 G1 and i have installed all mandatory drivers from HP site , but now i am facing a problem with the display cards .I tried it n PES 13 Game , it says that my device is not apprpraite , also it reads the AMD card ram as 32 MB and says its unable , also that happens with intel card.

Hello @Captiano ,
Thanks for posting on the HP Forums!
I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
Have a wonderful day!
Mario
I worked on behalf of HP.

My HP Probook 450 G0 fingerprint reader is not working WIndows 7

Hello,
I am trying to enable my HP Probook 450 G0 fingerprint reader.... I tried many driver version of validity sensor... and finally i have currently installed the driver and software that are mentioned in following link....
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/DV4-1240br-FingerPrint-Driver-f...
Both are them working fine (**without any error) But DigitalPersona is showing me the following message on welcome screen.... "The FingerPrint reader is not connected.Connect the reader"....
OS : Windows 7 Professional
What do you say.....is there any compatibiltiy issue or any hardware issue....or if there any driver mismatch, can someone suggest me the supported driver version....
Thanks in Advance

I have the same problem as the original poster, and followed the download link you provided only to encounter the exact same issue. I am using Windows 7 and bought this machine two days ago. I don't understand why this singular process is this problematic. I really miss my ASUS K53E and it's face logon feature.
Perhaps HP should take lessons unless they have something better than this "fingerprint reader." The only consistent feature I am detecting is its inconsistancy. Oh well, I just won't bother using it, or put a sticker over the thing.
If I have to spend more than an hour troubleshooting a feature of medium to low importance then it was a mistake to purchase the machine (but it was a gift sadly), and it was a mistake to implement the feature and release it without making sure it works. Pretty weak HP, but not as bad as Toshiba or Gateway/Acer at least--not that it says much.
Anyone have a legit fix for this annoying issue? Or some third party facial recognition login program instead?

Unable to Install Win 8 in Probook 450 G2

I bought a new note book of HP Probook 450 G2 with Free DOS installed by factory. I am quite familier with DOS, Partitions & technical staff. I purchased this Probook 450 G2 becase of its beautifull design & specs, Its price suite me so I purchased it without Windows installed.
So after getting it I tried to install Windows 8 Pro via a USB Boot Installation but I got stuck at selecting Pratition to where it would be installed. It has 1 TB Hard dics drive.
I deleted all partitions --- >> Unallocated 1 TB
created single partition of 1TB ----> Created Partition 1 Size = 1TB
Clicked to Install Windows in it ---- > Error ( We couldn't create a new partition or locate an exiting one )
Then tried Again !
I deleted all partitions --- >> Unallocated 1 TB
created single partition of 200GB ----> Created Partition 1 Size = 200GB
Clicked to Install Windows in it ---- > Error ( We couldn't create a new partition or locate an exiting one )
Then tried Again !
Put Win 98 CD and Run FDISK ( The old way -> Low Level Format )
created single primary dos partition of 500GB ----> Created Partition 1 Size = 500GB
It took 12 Hours to complete above process " Verifying Device Intergity ..... "
After 12 Hours of completion I said to restart & farmat C:
After restart at started Win 98 with CD support ..
reached Command Prompt : FORMAT C: /Q
Error : Media Not found
This HP Probook is purchased 2 days back.
If anyone know how to resolve this issue.
Help will be appreciated.

You're very welcome.
Sometimes strange things happen.
The error messages don't always match up with the real problem.
It sounds like Windows can't find the drive and when it can't find the drive that normally means the applicable sata driver needs to be installed.

I want to use finger print on HP Probook 450 G1 .. Windows 8.1 Pro

Please help me i just Bought HP probook 450 g1 .. and i installed the validity fingerprint sensor succesfully but i don't know how to use the finger print or where i can find it .. i downloaded simplepass .. tha black virsion and i couldn't understand any thing .. and l keeps telling me '' Simplepass can use your windows pass word to log on'' and whenever i write it .. the program tells me .. the password you enterd doesn't match .. and i tried to install HP Client Security Manager .. i keep telling me that ERROR 1001 .. i i want to do is the use the fingerprint ... is that possible in that laptop .. i think i'm going to die

Amr-Zero,
No dying!
As far as I know, your computer is not going to run SimplePass -- it wants to run the HP Client Security Manager.
There are some prerequisites as listed on the System Requirements page. Amongst these: the File Sanitizer Software, both .NET framework 3.5 and 4.5, and others. It is likely that your system has all the necessary software, although you may not have installed the File Sanitizer yet. It is available from your computer's driver page.
If you do not yet have .NET Framework 4.5, you can download install .NET Framework 4.5.1: Microsoft .NET Framework 4.5.1
It is of vital importance that you have all your Windows Updates in place. Make sure they are indeed complete. If you are one of the people in the world that do not believe in Windows Updates, turn them off later -- this is not the time.
HP ProBook 450 B1 Notebook Drivers - Windows 8.1
You need to remove and banish that SimplePass software from the system.
Control Panel > icon view > Programs and Features > find and remove the SimplePass software
Next:
Create a Restore Point Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and Shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook
Boot the computer and log in
Reminder: Hard Reset is just a device Reset. The Hard Reset procedure does not wipe out your files nor does it destroy your Windows setup in any way. It just "clears the cobwebs". Depending on the cause of the problem, this kind of "reset" can fix a variety of computer glitches.
==========================================================================
Unfortunately, this is the extent of my knowledge on the subject. You have a "business" computer and this is "business" software. I perfectly understand that YOU might be just someone sitting in your house somewhere on the planet -- it is the COMPUTER and the SOFTWARE that is the difference here.
There is a White Paper on the subject in your Manuals section -- it is useful if you have some background in the subject at all.
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

Is Probook 450 G1 support Ubuntu??

Is my Probook 450S G1 compatible with Ububtu latest version? I want to install Ubuntu in my laptop. I heared this is not support Ubuntu.

@shahriyar31
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Probook 450 G1 HDD strange noise

Hello,
I've bought my probook 450 G1 less than a week ago and I've noticed that the HDD is producing annoying noise, similar to scrathing even when there is no extensive ative accessing of HDD from my side, and I believe an occasional clicking sound.
I am not sure, if this is normal for a 5 day old computer.
This is the sound it produces (plus the light scrathing sound): http://picosong.com/Ctpv/
Any help would be highly appreciated!

Hello giannislol,
To get your issue more exposure I would suggest posting it in the commercial forums since the Probook 450 G1 is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime:
HP ProBook 450 G1 Notebook PC.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Action Keys Mode on ProBook 450?

Is the option to reverse the F1-F12 function keys (''Action Keys Mode'') available in ProBook 450's BIOS?
And if not, do you have to press for example Fn+F4 to use F4?
Thanks.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
I worked on behalf of HP

Unable to use HP Probook 450 G2 Fingerprint feature

I purchased a HP Probook 450 G2 with free dos version yesterday. I successfully installed windows 8.1 pro on it with all HP drivers from the site. But apparently, HP drivers web page for my probook doesn't offer me with "simplepass"software for the finger print feature. So, I downloaded it from a third party webpage. I checked from BIOS and the fingerprint option is enabled, I have also installed the validity sensor driver and no matter what I simply don't get any "finger print"option on the program (Simplepass), all they show is "PIN or CHARACTER Pass" and nothing else. Similarly, on the "SIGN IN"option of the windows, they don't show any fingerprint options for security. All my drivers are updated. Validity sensor driver is 4.5.133.0, SimplePass is of 2015. I am starting to give up because I have googled as much I could and tried all the safest approach, still didn't work. Someone help? Thank You in advance.

Please check in the Device Manager and make sure you see the Validity Fingerprint Sensor in BIOMETRIC as shown in the below picture If you find Validity Fingerprint Sensor in Device manager, please click on the below link to download and install the complete Suitehttp://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_138571_1&swEnvOid=4158# Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84Although I am an HP employee, I am speaking for myself and not for HP

Windows 8.1 ATI Radeon 8750M Drivers For Probook 450 G1

I installed windows 8.1 into my Probook 450 G1 and I could not find any ATI Radeon 8750M drivers to it. The windows 8 drivers are not working properly in windows 8.1 .
This question was solved.
View Solution.

Try drivers from here:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5405422&spf_p... - Graphics
ELSE
Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

How much memory could I put into a HP ProBook 450 (H6P51EA) ??

Hello,
I am trying to choose notebook between this models:
HP ProBook 450 (H6P51EA)
HP ProBook 450 (H0V97EA)
HP ProBook 4540s (H5J79EA)
How much memory could I put into a HP ProBook 450 (H6P51EA) ?? (maximum memory)
It is difficult to find this information (It is difficult for me as I need to traslate from english.)
I read the http://h18000.www1.hp.com/products/quickspecs/14588_div/14588_div.PDF , but there is no concrete information for H6P51EA.
Help me to find out with it. Where I can find this information?
It will be better if I will know max memory for each of the notebooks.
Thanks.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Probook 450 GO laptop SD card reader not working

SD card reader not recognizing any sd card and not working. Any suggestions?
+ Touch pad not working with double click - have to use the button below

Hello @Jurists
Thank you for posting on the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since the ProBook 450 G0 is a commercial product. You can do this here: Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP ProBook 450 G0 Notebook PC
I hope this helps!
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

IMac iSight GPU Temp?

Hi,
I just got my iMac iSight a couple days ago, and i was monitoring the temp of the iMac with Temperature Monitor when i noticed that sometimes my GPU Temp will go up to around 96°C/205°F ... is that normal? i dont want to burn up my graphic card... thanks in advance for any help on this..

Valhalla:
Are you referring to you CPU temperature or the GPU because there are two GPU temperature sensors. I assume you mean the CPU. I don't care what you were told. To me 205 is too hot. Noone else has reported a temperature that high. In fact, I believe the earlier versions shut down around 180+. Why should this one be able to go up to over 200?
I would call help desk again find out what is the accepted range, tell them you think it is running to hot and a new computer or any computer should run that hot. Better yet, find out at what temperature the computer shuts down. Get a case number and make sure you tell the individual that you fear it will burn up your graphic card.
Or tell Apple you are returning the computer. I would be very tempted to return it and don't fret about how long it would take to get another.

Probook 450 GPU temp

Similar Messages

Maybe you are looking for