ProBook 4520s hangs during upgrade from Windows 7 to Windows 10 due to Ralink RT3090 driver

While upgrading my ProBook 4520s from Windows 7 pro 64 to Windows 10 pro 64 the laptop froze. It appears that it was caused by the Ralink RT3090 wifi chip driver that comes with Windows 10. I have replaced it with another driver and the upgrade worked fine. The procedure I followed was as follows: - Disable the wifi/bluetooth combo in the BIOS settings. - Goto control panel - Windows upgrade and start the listed Windows 10 upgrade- After Windows 10 has been installed, download the Ralink RT3090 driver from: http://mediatek.com/en/downloads1/downloads/pcimpcicbrt2860rt2760rt2890/ fill in a name, email address and the captcha to start the download of the driver package. Note that Mediatek bought Ralink a few years ago so this site is from the manufacturer or the Ralink RT3090 wifi chip used in the laptop. - Unpack the driver package in a folder.- Select Windows key + R, enter msconfig and run it- Select to start Windows 10 in safe mode after the next boot - Select to reboot the PC- When the PC restarts but before Windows 10 starts up, enter the BIOS settings by pressing escape- Enable the wifi/bluetooth combo in the BIOS settings- Save the BIOS settings and exit- Windows will start in safe mode- Install the new driver by running setup.exe in the folder where the driver package was unpacked- Select Windows key + R and enter msconfig and configure to start Windows normally after the next boot- Reboot It appears that the ProBook 4520s can also come with other wifi chips than the Ralink 3090, so this fix might not be suitable for all versions of the ProBook 4520s.

Thanks for the advice!

Similar Messages

Dbua hangs during upgrade from 10.1.0.5 to 10.2.0.1

Hi All,
I am working on upgrading database from 10.1.0.5 to 10.2.0.1 on RH linux(32-bit).
After completing the basic software installation on a new ORACLE_HOME,
I triggered DBUA for upgrading the db.
DBUA hangs immediately after collecting the database information.
When I checked the processes running on the server, I could see that java process is consuming nearly 100% of the CPU.
I had to kill the process as it was hanging for a long time.
Has anyone come across such an issue?
Thanks,
Saj

Hi Srini,
There are other errors:
83: Object type TABLESPACE failed to create with error:
ORA-01119: error in creating database file '/u01/oracle/oradata/patriadb/ptlidx.dbf'
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
Failing sql is:
CREATE TABLESPACE "PORTAL_IDX" DATAFILE '/u01/oracle/oradata/patriadb/ptlidx.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 31457280 MAXSIZE 32767M LOGGING ONLINE PERMANENT BLOCKSIZE 8192 EXTENT MANAGEMENT LOCAL AUTOALLOCATE DEFAULT NOCOMPRESS SEGMENT SPACE MA
ORA-39083: Object type TABLESPACE failed to create with error:
ORA-01119: error in creating database file '/u01/oracle/oradata/patriadb/ptllog.dbf'
ORA-27040: file create error, unable to create file
Linux Error: 2: No such file or directory
Failing sql is:
CREATE TABLESPACE "PORTAL_LOG" DATAFILE '/u01/oracle/oradata/patriadb/ptllog.dbf' SIZE 4194304 AUTOEXTEND ON NEXT 31457280 MAXSIZE 32767M LOGGING ONLINE PERMANENT BLOCKSIZE 8192 EXTENT MANAGEMENT LOCAL AUTOALLOCATE DEFAULT NOCOMPRESS SEGMENT SPACE MAN
ORA-39083: Object type TABLESPACE failed to create with error:
ORA-01119: error in creating database file '/u01/oracle/oradata/patriadb/oca.dbf'
47,1
I guess the point is, should I use IMPDP using Network link?
the doc seems to suggest this will work better

I currently have an old version of Photoshop Elements, it is version 5.0. I recently upgraded from my old Windows XP computer to a new Windows 7 computer. My question is: Can I install this version 5.0 on my new windows 7 computer without any problems?

I currently have an old version of Photoshop Elements, it is version 5.0. I recently upgraded from my old Windows XP computer to a new Windows 7 computer. My question is: Can I install this version 5.0 on my new Windows 7 computer without any problems? my email is: [email protected] Thank you!

Do not know about 5, but, just installed PE 6 on I7 64 bit and it works.

No Sound Devises Detected on my Laptop after an Upgrade from Vista to Windows 7 !

I own a hp dv9720us laptop. I upgraded from vista to windows 7, and have lost all sound. I've tried about everything , but nothing worked. hp 's site say they no longer support driver updates , since 2010. Can anyone help me , Please ?
JIM

Hi,
Have you checked this ?
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/General-Windows-7-Upgrade-Guide-for-HP-L...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Satellite P200-17C - Upgrade from Vista to Windows 7

Am looking to upgrade from Vista to Windows 7, anybody done this? And was thier any problems with drivers etc?
Thanks

Hi
I dont know what you want to hear now exactly but you can download all drivers here:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
As far as I know this P200 model belongs to the PSPB6 series.
Therefore it seems that all drivers available for Windows 7 32bit.
Generally about Vista and Windows 7 I can say that new OS runs much faster and never had a problem as yet. I can recommend it! :)

How to upgrade from Vista to Windows 7?

I recently bought the upgrade version of Windows 7 utimate for my laptop, my laptop is new and Windows Vista pre-installed. I would like to know if I upgrade Windows 7 from this "Fresh", pre-installed vista, would this Windows 7 operate as good as the clean installed Windows 7?
I am not very clear how Vista upgrades to Windows 7, do Windows 7 upgrades based on the old Vista system? Or it will install a clean and new Windows 7 then only copy all the settings and programmes from old Vista?

Hi
Can you please tell us what Toshiba notebook you have exactly and what Vista version you have exactly (Home, Business, etc. and 32bit/64bit)?
Theoretically you can upgrade from Vista to Windows 7 but it must be same version. That means its only possible to upgrade from 32bit to 32bit and 64bit to 64bit.
If you want to upgrade you have to insert this disc and follow the screen instructions, thats all.

Upgrade from vista to windows 7 home premium

I want to upgrade from vista to windows home premium but I'm told I need to find out if my computer can actually support windows 7. Can someone tell me how do I find out if my computer is able to be upgraded to windows 7? I have an hp pavilion with a 32 bit operating system, the model number is a6207c. Thank you

Ok, I tried this and it said I needed to download and install Nvidia graphics driver version 309.08, I downloaded and installed this version just fine. I done option 2 again and now it says download and install version 353.30. I download this version but got an error when I tried to install it that says THIS GRAPHICS DRIVER COULD NOT FIND COMPATIBLE GRAPHICS HARDWARE. Do you know what I should do now to fix this?

Can we activate Classic General Ledger in ECC6.0 during upgrade from 4.6C

Dear SAP Gurus,
Greetings
My Client's technical team had upgraded their system from 4.6C to ECC6.0 and they had activated classic GL instead of New GL. And they had also activated classic withholding tax in place of Extended Withholding tax.
They are facing some error during posting of transactions (like generation of excise invoices, posting of WHT transactions, etc.) I told that it can be a reason of not activating New GL.
Is my understanding correct...?? Can we activate classic GL during upgrade from 4.6C to ECC6.0...??
In case of a new client built (with ECC6.0), can we activate the classic GL instead of the New GL..??
Does the system will work correctly in the long run if they had activated classic GL and classic WHT...??
Please clarify. Thanks in advance for your time and efforts
Regards,
Chaps
P.S. Points will be awarded for answers !!

Hi,
I think that you should read long text of OSS note 999614 carfully and you are
aware of the fact that you will have additional migration efforts in
case you need to migrate to new G/L later on.
In case you are convinced that this is the best way please feel free
to deactivate new G/L as described in note 999614.
Please make sure that you deactivate new G/L in all clients of your
new system in case there were already client copies done.
Yes this is possible and I would not automatically assume that
error during posting of transactions are due to New GL not being activated.
Note 756146 documents the issue and possible repercussions
of using Classic GL.
In the case of a new installation the new G/L accounting
is active by default in ERP. In principle, the use
of the classic GL is also possible for new customers, however,
SAP does not recommend it since this requires an additional
migration expense in later years.
Regards,
Aidan

Hang during import from camera or media - HELP!

iPhoto hangs during import from camera or media reader. Works for 20 or more photos, then hangs. No response at all. Must force quit. After restarting the import, it will go further the next time, then hang again. And again. And again. Eventually the import completes. After that, all is OK until next import. VERY FRUSTRATING. Especially with 8GB media cards. ARRGH!
I've tried rebuilding iPhoto library (all options). Using iPhoto 7.1.5 on OS X 10.5.6. 4GB ram, intel dual core.
Help me Obe-Wan. You're my only hope.

LarryHN wrote:
Once you get your photos use your camera to reformat your media card - problems like this can be caused by a flaw in the card format
And it is better to use a card reader to import yoru photos and after they are safely in iPhoto use your camera to reformat your card - this assues no data loss and keeps your card format fresh
LN
I usually use the media reader. After the imports started hanging is when I tried importing direct from the camera to see if it made a difference. No difference.
I've reformatted the media. No difference. Still hangs on first import after reformat. Multiple media cards, all same result. Tried different USB ports, same result. Tried different media readers. Same result.

Upgraded from vista to windows 7 not seeing music list

I upgraded from vista to windows 7. When I sync my iPhone 4 I am not seeing my music listed nor my apps in the list. I had backed up my entire computer to my external hard drive and copied everything over to iTunes. But not showing up in any lists when I connect my phone???? Any ideas?

Hi,
I'm am used to working on Mac's but u don't think my advice will hurt.
iTunes reads your hard drive for songs and compiles a song list for them.
It then stores this data as your ituneslibrary.plist file.
In the file drop down menu you should have an option to select library.
Try reelecting your iTunes library icon and then it should reload your iTunes with playlists and play counts etc

HP Media Center PC m1050e - Can't connect to internet after upgrade from XP to Windows 7

My desktop PC with Windows 7 will not connect to the internet after upgrading from XP to Windows 7 Home Premium. This upgrade actually required saving files and a fresh install of Windows 7. When getting Router support help to load a new driver, I keep getting a an error message "Realtek Network Contoller Was Not Found". They say it's an issue that HP will need to help resolve. Can anyone help?
This question was solved.
View Solution.

Thank you very much for your help. I will look into the two options you gave me.

How Much $ is the Upgrade from CS5 for windows to CS6 for a small business with 3 users?

How much $ is the Upgrade from CS5 for windows to CS6 for a small business with 3 users?

Creative Suite 6
You'll still need to buy 3 licenses, of course...
Mylenium

Can I upgrade from acrobat 9 windows to XI mac version?

Hello, like the title says: Can I upgrade from acrobat 9 windows to XI mac version?; I actually have an acrobat 9 pro version for windows, but I want to upgrade to acrobat XI for mac, is this posible?. Thanks!

Hi ,
Welcome to Adobe Forums..!!
Yes, you can upgrade from Acrobat 9 for Windows to Acrobat XI for MAc .
Kindly visit this website :-
http://www.adobe.com/products/acrobatpro.html
Click on Buy
It will display the following options:-
I want to buy: Upgrade
I own: Select Product
Platform:Windows
Language:English
Select Acrobat 9 PRO/Std from the I Own section .
Select Platform : Mac
Cick on Add to cart.
Place the order.
Let us knw if it helps..!!
Thanks
Tanvi

I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I requ

I lost my logic 8 pro serial number. I can't find the booklet that comes with the serial number. How can retrieve this? I upgraded from logic pro 7. I changed hard drives and now it keeps asking for the serial number. But I can't find it. Where can I request it? Thanks!

If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

ProBook 4520s hangs during upgrade from Windows 7 to Windows 10 due to Ralink RT3090 driver

Similar Messages

Maybe you are looking for