Probook 4540s charging led blinking

My charging led blinks and the laptop won't power on
This happens if i connect the charging jacks(without the battery) in the following order: 1st insert in the laptop 2nd in the outlet, If i do it backwards, first in the outlet then i connect the charging jack to the laptop it works fine, It bothers me that every time i have to dissconect the charging jack from the laptop and plug it in after i ve plugged the plug in the outlet. I have 2 friends with same laptop and they don t have this problem.

Hi mihailgreceanu,
Your Probook 4540s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

  • When charging my laptop and laptop is off, charging led blinks for 3 or 4 times then start blinking

    i have hp dv7-3183cl, when i put my laptop on charging and its turned off, charging led blinks for 3 or 4 times then it starts charging, what it means

    Hi,
    I don't know people call this but we normally call it as an "handsake", all smart batteries should do this way.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • MacBook Pro won't turn on after crash. Charging LED blinking rapidly

    Hi. I hope you can help me.
    I have a macbook Pro 13", from september 2012, which crashed earlier today:
    I was charging my iphone through USBport on my macbook (not an Apple USB-iPhone power-cable) .
    My MacBook was charging through the magsafe charger (about 30% power i think).
    I took the phone out to make a call, when that was done, I reconnected the phone to my mac for further charging.
    My MacBook crashed instantly. I took out the USB cable, tried to turn on my mac, but nothing happened. There was no light in the magsafe LED.
    The crashing has happened before, when I've been charging my phone through USB connections, but I've always been able to turn my mac back on.
    This time nothing happened when I pushed the power button. It had comepletely shorted out.
    BTW. Earlier today I received a "storage almost full" warning on my mac, and I was actually in the middle of cleaning that up (deleting downloads and trash files).
    Typical and just my luck!
    Now, a few hours later, I tried restoring SMC (shift+ctrl+alt+power), and now the charger LED is blinking rapidly (but faintly) orange.
    Do you have any ideas on how to fix this? All applestores nearby are closed today, I live in Denmark.
    Thank you so much in advance!
    Kind regards Emilie

    Try the SMC reset again:
    https://support.apple.com/en-us/HT201295
    Then try a NVRAM reset:
    https://support.apple.com/en-us/HT204063
    Then try a safe boot:
    https://support.apple.com/en-us/HT201262
    If no success, then you will have to take it in for service.
    Ciao.

  • Charge led blinks every second when Laptop NX9420 is turned off.

    I have a new battery, in a HP Compaq NX9420 and it can run the laptop for 2 hours isch,
    it can also run it on power adaptor only, battery removed, so both battery and charger is ok.
    But,
    When turning off the laptop from within windows it goes off and all is normal, after some 3-12 hours the charge led starts to blink amber/orange every second, if I press on/off button nothing happens, I have to remove the battery and slap it in again then it starts,
    (after pressing on/off ofc.) the battery is slightly drained what I can see?
    checked everything in bios but nothing
    tested also HP Battery check and it says all ok.
    Motherboard busted?
    RTC battery weak? I still keeps track of time and settings bioswise.

    Hi,
    I don't know people call this but we normally call it as an "handsake", all smart batteries should do this way.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • MacBook Pro won't turn on after crash. Magsafe charger LED light blinking rapidly

    Hi. I hope you can help me.
    I have a macbook Pro 13", from september 2012, which crashed earlier today:
    I was charging my iphone through USBport on my macbook (not an Apple USB-iPhone power-cable) .
    My MacBook was charging through the magsafe charger (about 30% power i think).
    I took the phone out to make a call, when that was done, I reconnected the phone to my mac for further charging.
    My MacBook crashed instantly. I took out the USB cable, tried to turn on my mac, but nothing happened. There was no light in the magsafe LED.
    The crashing has happened before, when I've been charging my phone through USB connections, but I've always been able to turn my mac back on.
    This time nothing happened when I pushed the power button. It had comepletely shorted out.
    BTW. Earlier today I received a "storage almost full" warning on my mac, and I was actually in the middle of cleaning that up (deleting downloads and trash files).
    Typical and just my luck!
    Now, a few hours later, I tried restoring SMC (shift+ctrl+alt+power), and now the charger LED is blinking rapidly (but faintly) orange.
    Do you have any ideas on how to fix this? All applestores nearby are closed today, I live in Denmark.
    Thank you so much in advance!
    Kind regards Emilie

    Try the SMC reset again:
    https://support.apple.com/en-us/HT201295
    Then try a NVRAM reset:
    https://support.apple.com/en-us/HT204063
    Then try a safe boot:
    https://support.apple.com/en-us/HT201262
    If no success, then you will have to take it in for service.
    Ciao.

  • NeW Probook 4540s Battery full charge capacity DEcreasing consistantly

    hello, i m using hp probook 4540s for one month and after just one month of use my notebook battery full charge capacity only remains 77% some time it shows Even 72-73% .. Why So? i cheked through hp support assistant-hp batery check utility,, Does it comes under warrenty should i go for it.. plz help me out as my laptop is just one month old and it is not good to show such amount of full charge capacity So early.. for ur help i m attaching the screen shot of what i got.. 

    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
    HP ProBook 4540s Notebook PC Support
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Hp Probook 4540s Battery full charge capacity DEcreasing consistant​ly

    hello, i m using hp probook 4540s for one month and after just one month of use my notebook battery full charge capacity only remains 77% some time it shows Even 72-73% .. Why So? i cheked through hp support assistant-hp batery check utility,, Does it comes under warrenty should i go for it.. plz help me out as my laptop is just one month old and it is not good to show such amount of full charge capacity So early.. for ur help i m attaching the screen shot of what i got.. 

    Hi IamMubashir,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
    I hope this helps.
    I worked on behalf of HP.

  • A problem with Probook 4540s BIOS!!!

    I have probook 4540s laptop, two day ago, i updated the BIOS. I dowloaded the BIOS from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5269095&... After that, i couldn't turn on my laptop. It just have had blank screen and Caplock light blink 3 time. Can you help me!!!
    This question was solved.
    View Solution.

    The following was taken from here.
    Code descriptions
    Use the following table to learn about the meaning of a code that your computer may encounter.
    Code type Number of Blinks or Beeps Component Being Checked Condition Possible solution(s)
    AC power adapter LED
    Constantly on
    Power adapter
    OK. Power is being supplied.
    None. The power adapter is likely not the problem.
    AC power adapter LED
    Constantly off
    Power adapter
    Power is not being supplied
    Try a different power outlet.
    Replace power adapter.
    AC power adapter LED
    Continuous blinking
    Power adapter
    Insufficient power
    Try a different power outlet.
    Replace power adapter.
    Caps Lock/Num Lock
    1
    CPU
    CPU not functional
    Reseat replace CPU.
    Service
    Caps Lock/Num Lock
    2
    BIOS
    BIOS corruption failure
    Restore BIOS from onboard backup (jumpers)
    Service
    Caps Lock/Num Lock
    3
    Memory
    Memory module error not functional
    Reseat memory modules (see next section).
    Test memory from UEFI or BIOS.
    Replace bad memory modules.
    Service
    Caps Lock/Num Lock
    4
    Graphics
    Graphics controller not functional
    Service
    Caps Lock/Num Lock
    5
    System board
    General system board failure
    Service
    Caps Lock/Num Lock
    6
    BIOS
    BIOS authentication failure
    Restore BIOS from onboard backup (jumpers)
    Service
    Beep
    Varies
    Varies
    Varies
    Reseat memory modules (see next section).
    Service
    For more detail on the exact code, search the Internet for "beep code" and the manufacturer of your BIOS - such as AMI or Award.
    The caps lock blinking three times indicates it is related to the RAM.
    You can try disconnecting everything including the battery and the AC charger, holding the power button for one minute, and then turning it on.
    If that does not help, then you can try removing each RAM module and trying with them one at a time. 
    Page 60 of this guide details how to remove the RAM should you need it.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Blackberry Curve 9220 led blinking 4 times

    Hi, 
    i'm ikari from indonesia, 
    i have 9220 curve in condition led blinking 4 times.
    i put my device to apploader, it says USB-PIN: UNKNOWN.
    i've click next, after that my phone is start to reboot again and apploader failed to connect to my device.
    i don't know what happened to my device, it starts from charging in a night.
    at morning, my led device is blinking 4 times.
    sorry if my word can't to understanding...
    thanks.

    Hi and Welcome to the Community!
    Before you proceed to try and reload your OS, I recommend something a bit less destructive...
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HP Probook 4540s Sudden Shutdown Without any Warning

    I have a HP Probook 4540s laptop bought in November 2012. It has Core i5-3210M CPU @ 2.50 Ghz chip with 8 gb ram and 500 GB hard disk. Till 2014 it was all OK. But now it has started giving me problems like it shut downs when it is at low battery say just about to reach 10 %. No low battery message just complete shut down(bam, screen goes dark). Now I have done the following steps
    1. Battery has been calibrated it did solve the problem but it again started to happen.
    2. I got my laptop's fan replaced 28 days back on i guess Jan 5, 2015 and vents are clean
    3. I use Hardware Monitor Software to monitor the temperature and the results are as follows :
              >> During Normal Operations it remains between 50 to 55 C (is it Normal ?) What should be the ideal temperature ?
              >> Hard Disk temp is 60 to 64 C.
    4. I use battery saver mode and everything set to normal
    5. Drivers and BIOS Updated
    6. Used HP Support Assistant to check battery health it shows OK.
    7. I have changed the values also like I set the critical level,low battery and reserve battery but i guess that also not working.
    Now My Question is 
    1. Is it due to overheating ? During normal operations like when plugged in it doesn't shutdown. Works Perfectly.
    2. Or the battery is giving me trouble and needs to be replaced. After 100% charge it gives me around say 1 hr 30 mins of use but when it is about to hit  11 or 10% the system shuts down. 
    Please provide me with a solution
    P.S. I don't use my laptop for gaming

    Deep.
    Download and run BatteryMon.
    http://download.cnet.com/BatteryMon/3000-2094_4-29244.html
    After download click on start.
    In the upper left hand corner you will see a battery tab click on it to get the details of the battery.
    Look at Design Capacity,  Full Charge Capacity and Current Capacity.
    Let us know what you find.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Satellite A10: Battery-LED blinks with AC

    Not too long ago I bought a new battery for my notebook. About a half year it worked well. But one day I couldn't start the notebook without AC. I thought, the battery was simply discharged. So I set up the AC-adapter, but the next time, the notebook didn't start either. With AC no problem.
    So I charged the battery, and when Windows said, Battery Full, and the LED was green, I disconnected the AC. But then, the notebook fully stopped, as if there was no battery.
    Now it is this way: it doesn't matter what Windows sais. The Notebook doesn't start without AC. After a disconnection of AC, the battery-LED blinks fastly orange. When windows runs, it only blinks slowly orange.
    Where is the problem? Does anyone know a solution?

    Hi
    In my opinion there are two possibilities.
    Either the battery is dead and must be replaced or the notebooks power supply electronic malfunctions.
    The first possibility is not serious problem because the battery replacement should helps to solve this issue but if the notebooks power supply electronic does not work properly, the whole motherboard should be replaced.
    I think its advisable to contact the ASP in your country because the guys could locate the fault very quickly and could provide the best solution.
    Good luck buddy

  • About adding extra graphics card in HP Probook 4540s Notebook Pc

    I have an HP Probook 4540s Notebook Pc laptop with i5 3230m processor (2.6 GHz) and Intel HD Graphics 4000. I use 4 GB RAM.
    I want to add Extra Internal Graphics Card (such as Nvidia).
    Can I do it?
    If yes, how? Please explain!
    This question was solved.
    View Solution.

    LOVE_DREAM wrote:
    Is there any other way to use a graphics card?
    Hi,
    It already has video chip (card). As mentioned above, no way you can add an external video card to your machine. Actually there is one way which requires the following steps:
    (a) Buy a new motherboard which supports external video card,
    (b) Buy a new video card,
    (c) Buy a new cooling system,
    (d) You may need new power supply (charger)
    And at the end of the day your machine may NOT work as you dream and the total cost would be more than the price of a new, better computer.
    Hope this explains a bit more.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Laptop charger indicator blinking in orange color after charger plugged into laptop

    Hi,
    I am using HP Pavilion G6-2313AX model laptop with Windows 7 OS,  i've problem in my laptop after charger plugged in my laptop the battery indicator in OS displaying a message like "Plugged in, not charging "  and " Indicator near charger pin blinking in orange color", i tried with another hp charger i am getting same message.   Its a new laptop i bought 3months before. please help to resolve this issue.

    With the battery removed can you start the notebook and boot into Windows?
    That is a critical item to know. That lets you know that your power adapter is OK. A flashing charge led can indicate a faulty battery or voltage below that required to power the notebook.
    Run the battery test from the UEFI diagnostics.
    Press the power button and then immediately tap the Esc key. Choose F2 for Diagnostics. Choose component tests and then battery. Run the short or long test.
    The battery is a warranty replaceable item. If it fails the test, Contact Hp to arrange for a warranty replacement. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HP PROBOOK 4540S boots on battery but not on multiple a/c adapters.

    ac adapter/battery light indicator next to power connector flashes white when ac is plugged in. Laptop seems to work fine on battery alone. Also when in windows after starting up on battery, the battery wont charge.

    Hi @rey777,
    Welcome to the HP Support Forums! 
    I understand that your HP ProBook 4540s Notebook PC will not power up on the AC adapter. Your ProBook is a business computer and you will find the best answer to your questions on the Commercial Forums. You can post your questions here at the HP Enterprise Business Community.
    In the meantime, here is the HP ProBook 4540s Notebook PC support page, that may have the solution for you.
    I hope this information helps.
    Take care and have a great day!
    I worked on behalf of HP.

  • Compaq CQ61 won't boot, 2 led blinks.

    Product Name and NumberCompaq Presario CQ61-310SA Operating System installed (if applicable)None Error message (if any)LED flashes twice before pausing and repeating. Indicates BIOS corruption. Any changes made to your system before the issue occuredBeen inactive for 10 months due to having no power cable, I purchased a 3rd party power cable for it today. ProblemHello, as I stated above, my laptop has been inactive for 10 months and only today I decided to finally get a charger for it, which set me back £5.99, clearly a low quality charger but I was unsure if the laptop even worked anymore and didn't want to splash out on a manufacturer charger. When the AC adapter is plugged in, the LED indicator next to the charger port lights up, but with the battery installed the charge LED inbetween the Power and HDD LED's flashes 4 times, on the 4th flash it holds for about a second then discontinues the blinks. When powered up the backlight and LCD do not turn on and the CAPS LOCK and NUM LOCK LED's flash twice before pausing and repeating and the WiFi light glows orange. I can hear the HDD and fan spinning but the BIOS isn't initiated. I understand this error code refers to BIOS corruption and have attempted a hard reset, holding the power for 15 seconds as stated on some websites, then 30 as stated on others, and finally 60 seconds, as well as replacing the BIOS battery, HDD and memory modules to no avail... It doesn't seem as if the battery is charging at all, but it is completely empty so I'll leave it for a while to see if it does charge. Is this anything to do with the fact I bought a cheap chinese charger? Or would I have to replace the motherboard? AC AdapterName: WeiXin Da Electronics AC Adapter - PA-1700-02Input: 100-240v ~ 1.8AOuput: 18.5V ~ 3.5A Many thanks, Jordan.

    This is a phenomenon of these computers.
    If you have a computer that won't boot, remove battery, unplug charger. Press powerbutton for at least 20 seconds, insert the power cable, and hold for another 20 seconds. Nothing will seem to happen. Then press power again.
    Your LiION battery is close to end of life. Replace. Or get used to doing this. Diag software will warn for failed battery. You will also have a ton of BIOS messages about an obscure error occuring. But you need to have a working Diag partition to make some sense of the meaningless error reported in BIOS.
    This has nothing to do with the RTC/NVRAM backup. But it's no reason to not replace it. It costs about 3$ and you can find a 2032 Lithium cell almost everywhere. (3V, 20mm diameter, 3,2mm thick). Located under the harddrive bay cover on the bottom of computer.
    If no boot occurs, check that the "lid closed" switch is working. In some environments they can get stucked in "Lid closed" position.
    Also if you have access to a can of compressed air (duster), clean the airflow / cooling part from accumulated dust.
    These are not exactly the most energy saving computers. They get hot. I have seen examples of plastic chassie parts melting.

Maybe you are looking for

  • In reply to the questn of Tap Zoo charged to me US$0.99

    Stedman I received your reply on the above.  You mentioned that the charges are for the App purchase of "Vial of coins" and not for Tap Zoo.. But the problem is I have not clicked on the "Vial of Coins".  and I have sync my iPhone with the PC, this g

  • Ken Burns Effect isnt working, arrggggh

    I have an older Mac G4 with a dual processor. Today, I installed a new processor (2GHz) in hopes that it would bring back the Ken Burns effects in iMovie. Do I need to upgrade to Tiger for this effect to work? I am also getting a message stating iMov

  • Payment was cancelled

    Dear, Yesterday I suddenly got the message that the Auto-recharge will not be enabled due to a problem with the payment. After a long and very stressful search on your website I was able to check the payment history. There it said the payment was ind

  • Canon EOS 7D Battery drain Issue

    Hello, Last week I bought a new Canon EOS 7D body. Before starting to use the camera for the first time I fully charged my battery and started using it. I used the camera for one week. I shoot raw with back display always on and LCD brightness to ver

  • Reading a text message

    I was wondering whether it is possible to read text messages from the inbox from within J2ME?