Probook 640 bios - Enable Intel VT-x and disable trusted execution for VMWare
With the Probook 640, can someone please explain, step by step, how I would make the proper settings in the bios for VMWare virtualization? I need to enable Intel VT-x and disable trusted execution.Thank you.
randallto wrote:
There was another setting in bois I found that required scrolling in the bios screen. Tricky to find with no mouse.
I am not sure if some day these terminologies can be standardized so someone can follow very specific instructions rather than vague instructions that are further obfuscated with the use of technical acronyms.
That is the problem, that error message in VM is not explicit enough as to what steps to take to correct the problem. These bois screen authors decide arbitrarily to name settings as it relates to their world personally and there are not standards.
I still don't know how that got changed in the first place but that is not an issue with VM ware as to what else is changing the setting.
Do you have any explicit suggestions as to how the error message can be improved?
Similar Messages
-
How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
Vishal GoyalHi Vishal,
I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
look article on below link to enable developer dashboard on specific master pages
https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Let me know if this helps.
Thanks
Bhism -
R835-P56X: Bios Options - Intel (R) AT and AT Suspend?
I was poking around in the BIOS for my R835-P56X and found a couple options that I haven't seen before:
Intel (R) AT
Intel (R) AT Suspend
I can't find any discussion of these options in the User's Guide (which doesn't cover the BIOS except for what can be changed with the HWSetup utility).
Does anyone know what they do?The question would be if it translates into real gains in real world applications. You should test some 3D game or something to see if the performance is really great or just the same as usual. glxgears is quite a useless benchmark by itself (though it's good news that you get 3000 fps anyway).
-
Can you enable Intel VT-x and EPT on macbook pro 3,1
Hi,
Has this problem still ongoing?Hi,
I use the same kind of MacBook Pro but am also a newbie. So maybe I can give some hints.
1) To automatically load a module, edit /etc/rc.conf and add the name of the module to the MODULES list.
2) Did you add pommed to the DAEMONS list of /etc/rc.conf ? Works for me perfectly.
3) I just strictly followed the Beginners Guide of the wiki.
- added !snd_pcsp to MODULES in rc.config
- installed alsa-utils
- installed alsa-oss
- added myself to the audio group
- invoked alsamixer to unmute channels
4) It can be configured in some files located at /etc/X11/xorg.conf.d/ . I've never looked into that because I use an external mouse.
Hope some of that helps,
Viv -
How to enable only current row and disable others?
Hi,
We have a requirement like, the top row only should be editable in a detail block. For example,
Item No. Item Name Qty
1 Item1 1
Add Row --> button
when i click this "Add Row" button a new row should be created with editable text boxes for all 3 columns. and the existing row should become display only row.
Could you any one please tell how to do in APEX?
Thanks & Regards
M ThiyagarajanHi,
Try this link:
Re: Tabular Form Question
Regards
Rana -
Why won't Do Not Disturb automatically enable at set times (and disable) when set in Notifications?
Can anybody tell me? It worked fine until yesterday.
Welcome to the Apple Support Communities
It's a bug that will be fixed tomorrow, but I hope that Apple fixes that because it will happen next year -
Refund amount and disable auto charge for subscrip...
Hello , Here is my order number ****************272
Please refund the amount and how can i disable auto recharge option ? I want it for USA but unfortunately subscribed for UK .. Please help
ThanksYou can use the links below to view and control any possible recurring charges:
Subscriptions: (Cancel any subscriptions you may be a part of)
https://secure.skype.com/account/call-phones/packages
Usage History (6 months):
https://secure.skype.com/account/usage
Billings & Payments: (If enabled, disable Auto-Recharge)
https://secure.skype.com/account/payment/atu/entry
Purchase History: (Every payment you've made since you had the account)
https://secure.skype.com/wallet/account/orders
Skype Number (Under settings, cancel any recurring number subscriptions)
https://secure.skype.com/account?page=onlineNumber
Once complete, request a refund for unused/unauthorised services
https://support.skype.com/en/faq/FA297 -
How do I license my Physical Windows and Unix/Linux Servers for VMware VCM?
I currently have vCenter Operations Manager Suite Enterprise edition which will allow me to manage my VMware VMs with VCM.
I would also like to manage my 300-500 Physical Windows and Linux/Unix Servers.
What license do I need to buy to achieve this?
Cheers,
/mYou need an OS Instance (OSI) license for each managed endpoint.
vRealize Suite Cloud Management Platform Purchasing | United States
Cheers,
Paul -
Enabling and disabling the button in the multi record block
hi all,
i am using
Forms [32 Bit] Version 6.0.8.24.1 (Production)
Oracle Database 10g Release 10.2.0.1.0 - Production
i have a multi record block each block contains a button(button is to approve the record in terms of changing the status)
i have the items like date,remarks and button
the button should be enabled if the remarks is not null otherwise it should be disabled.
for this in pre-record trigger i have written
if :record is null then
set_item_property('button',enabled,property_false);
else
set_item_property('button',enabled,property_false);
end if;what problem is enable and disable is impacting on all the buttons in the block. in other words if first record's remarks is null then all the records button is disabled. if first record's remarks column is not null then all the records of the button column is enabled.
i have to make enable and disable the button for the corresponding record.that means if first record's remarks column is not null then only first records button should be enabled others should be disabled.
Thanks..You need to set the No. of items displayed to 1 as Ammad had said, additionally you can set the X and Y Position (Just Y will do and having fixed X) of the button depending upon the current record.
can u explain this part alone bit more (setting the position of x and y)You need to calculate the variable Y_POS depending upon the current position of the cursor that is the current record.
You can find the current record Y_POS using combination of
V_CURRENT_RECORD := :SYSTEM.CURSOR_RECORD;
V_TOP_RECORD := GET_BLOCK_PROPERTY ('BLOCK_NAME', TOP_RECORD);
V_ITEM_Y_POS := GET_ITEM_PROPERTY ('ITEM_NAME', Y_POS);
-- Also needs to add the Y_POS of the relative other items in the muti-record block
V_HEIGHT := GET_ITEM_PROPERTY ('BUTTON_NAME', HEIGHT);
-- Note :- TOP_RECORD Returns the record number of the topmost visible record in the given block.
V_Y_POS := V_ITEM_Y_POS + ((V_CURRENT_RECORD - V_TOP_RECORD) * V_HEIGHT);
-- You will need to add Distance between Items in records if anyThen you can Set the current Y_POS of the button.
SET_ITEM_PROPERTY ('BUTTON_NAME', Y_POS, V_Y_POS);
[/code[
Hope this helps
Best Regards
Arif Khadas
Edited by: Arif Khadas on Feb 24, 2011 4:58 PM -
T430, disable "OS Detection for NVIDIA OPtimus" in BIOS, no graphic card can be found in Windows
I try to use my T430 minidisplayport to connect with external display. But it is so unstable that the connection between laptop and display can lost anytime. That is so annoying. I use Nvidia control panel in Windows to force use NVS5400M instead of HD4000, but it seems doesn't change anything.
I heard if I select the discrete graphic card in BIOS, then it may fix the display connection lost problem. Then I go to the BIOS and set the "discrete", and disable "OS Detection for NVIDIA OPtimus" in BIOS Config Display (This is necessary otherwise the laptop will change it back to Optimus automatically.). But after I log into Windows, then no graphic card can be found, Why? How should I fix this problem?
The external display issue in T430 is so annoying. The VGA suffers very serious noise while the minidisplay is so unstable. Even worse, there is no any lenovo staff stand out to help !!!!!!!!!!!!!!
If anyone has experience, please share that.
Thank so much.Hello Mark, thanks for help. Please see my answers below:
1. Windows 7 Ultimate 64 bits.
2. Yes, I did. The BIOS is latest (2.65). The NVS5400M driver is 333.02.
3. My display is Asus MX239, which only has HDMI. I use an adapter cable: miniDP->HDMI and then an HDMI-HDMI cable I try to connect to a Samsung TV, but similar. I don't have a miniDP to HDMI cable. I just order one but has not get it.
Sorry that I post in multiple threads. As I mentioned in that thread, let me conclude all these here.
After I disable "OS Detection for NVIDIA OPtimus" in BIOS, then I istalled the NVS5400M 333.11 driver. Then the NVS5400 can be found in Windows. But the displayport problem still exist. It is still very very difficult to detect external monitor (this means in most cases I can't switch to external display), and even sometimes it works, the connection can lost anytime.
Even worse, I found a new problem, that if I disconnect my T430 with power supply, then I can see the "pink bar" appear and disappear in the laptop screen (not external monitor) repetitively, quickly. I have never seen this problem before, only after I install NVS 333.11. Then I reinstall the 333.02 driver. Then I enabled the "OS Detection for NVIDIA OPtimus" in BIOS again. The "pink bar" issue gone. It looks like the issue is caused by 333.11 driver. But this driver comes from Nvidia offical driver download website.
So now the most important thing I need help is, I need to have a stable solution to connect external display. In T430, there are only two ports for external display:
1. VGA
2. MiniDisplayPort
Please help me following questions:
1. When I try to use VGA, I can see very very bad noise in external display. This issue also be posted in previous thread in forum. This should be a hardware design failure. Is there any solution to fix this that I can use VGA without noise in external display?
2. My T430 has both HD4000 and NVS5400M, if I need to use miniDP (which is I prefer, I have digital port why I use VGA.) for display. Does miniDP only work when the NVS5400 is used (it looks like that)?
3. If miniDP only works NVS5400, so how should I configure to ensure the T430 use NVS5400 all the time? Do I have to disable "OS Detection for NVIDIA OPtimus" in BIOS or I can switch using Nvidia Control panel in windows ?
4. Would you please provide me a configuration for T430 (include BIOS, and setting in Nvidia Control panel) that can support stable external display thru miniDP? Include driver versions and BIOS version.
5. What are potential reasons that the external display can't be detected and can lost connection anytime with T430? To be noted, I already set to use NVS5400 in Nvidia Control panel. The case is also same I disable "OS Detection for NVIDIA OPtimus" in BIOS. I think cable may be a issue.
Thanks again. -
Step by step to disable Folder Redirection for a single user - Windows 7 and SBS 2011 Essentials
OK...I got chewed (by someone I have a lot of respect for) for pounding on an old thread, so I'm starting a new one. I've got the Windows 7 Value Pack Plugin for SBS 2011 Essentials and Folder Redirection is working for everybody. What I'm looking for is
exactly how to go into Group Policy and disable the FD for a single user. I'm not looking for quick, incomplete answers. If you don't have time to give me the 'For Dummies' version, don't bother. Sorry, but I've done all the Googling I can stand for one day
and I'm over it! (and a little grumpy)
Thanks in advance!
Wayne S. CompTIA A+ CompTIA Network+ Microsoft MCP... I've got the Windows 7 Value Pack Plugin for SBS 2011 Essentials and Folder Redirection is working for everybody. What I'm looking for is exactly how to go into Group Policy and disable the FD for a single user. I'm not looking for quick, incomplete
answers....
Hi Wayne,
Here's what I'd do.
1) create a Security Group in your AD environment. Call it 'Folder Redirection Members' or something like that. Put all the user accounts in your AD environment who you want to have their folders continue to be redirected to the server, do not include the
one user who you wish to exclude. in other words, you're going to use a specific security group to target the Folder Redirection policy (right now, it's Domain Users, which is everyone).
2) Edit the Group Policy that the W7PP created in your AD environment. It's likely called "W7PVP Folder Redirection". Start with verification under the Settings tab, expand Folder Redirection beneath User Configuration states that
Policy Removal Behaviouris set to Restore Contents. Then proceed using the Editor, to make adjustments under the Scope tab; verify membership in Security Filtering. Remove Domain Users,
add in Folder Redirection Members (or whatever you named your group in step 1).
3) on your workstation that your user you are applying the change to disable folder redirection, Log on to the domain account while connected to your network, elevate a command prompt, and perform a 'gpupdate /force' command and then reboot your computer.
Folder redirection configuration should be removed from the system and redirected contents should be restored back to your local path. Verify with inspection of the My Documents or other folders.
Hope this helps. Keep in mind, no warranty implied or expressed in this advice.
Try not to be so darn grumpy. :-/
Jason Miller B.Comm (Hons), MCSA:Win7, MCITP, Microsoft MVP -
Intel Smart Response and RAID bios option
hi
unfortunately, i have lenovo M5400 and i am disappointed that i have another problem with this notebook.
i cannot enable intel smart response in intel rapid storage because i ave no RAID option in bios, only compatible/ahci.
why? how to fix it?hi pixo,
If you are aiming to Cache the SSD Caching,
Try it out on a non raid setup and try this step to cache the SSD
http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Y500-How-to-use-SSD-mSata-as-cache-withou...
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Unable to Enable Intel VT-x Via BIOS Setup: (Option no-longer Available?)
I have been using VMWare Workstation (V9.0.4) with my present motherboard for about 1 year. For no apparent reason, I can no-longer do so, because "Intel VT-x" is not enabled. When I enter the BIOS setup, the option that used to be there to enable "Intel VT-x" is no-longer present. I am wondering if the latest BOIS Version (H.90) is the culprit? If it is, is there a way to "roll back" to the previous BIOS version?
Motherboard BIOS Version: H.90 (Motherboard: X79A-GD45 Plus). Windows 8.1 (64-bit)@Svet: I checked and have (embarrassingly) found the problem. I was unable to scroll down in the BIOS settings menu for Overclocking, and therefore could not "see" the option I was looking for. I adjusted the sensitivity of my mouse(?) and all of a sudden all is well. I found the option concerned and enabled it (how it had become disabled after nearly 1 year, I do not know) and all is now as it has been for a year. Weird!
Many thanks for your willingness to assist, and sorry for wasting your time. Cheers.
(Is there a way to mark this issue as "Solved" as in some other forums?) -
Problem with 3 monitors Intel HD Graphics and GeForce GTX 560
I would like to attach 3 monitors to my box -- 1 to integrated Intel card and 2 to discreet Nvidia. I've tried different configs but I failed to make monitors connected to different cards to work at the same time. I have system with stock kernel, latest updates and the following configuration:
$ lspci | egrep "VGA|Disp"
00:02.0 Display controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
$ pacman -Qi xorg-server xf86-video-intel nvidia awesome-git linux | egrep "Name|Version"
Name : xorg-server
Version : 1.17.1-3
Name : xf86-video-intel
Version : 2.99.917-3
Name : nvidia
Version : 346.47-3
Name : awesome-git
Version : 3.5.2.397.gdde5b1b-1
Name : linux
Version : 3.18.6-1
$ lsmod | egrep 'i915|nvidia'
nvidia 8335766 46
i915 946695 2
button 12953 1 i915
i2c_algo_bit 12744 1 i915
video 18043 2 i915,asus_wmi
drm_kms_helper 80985 1 i915
drm 263481 7 i915,drm_kms_helper,nvidia
i2c_core 50152 6
drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia
intel_gtt 17848 2 i915,intel_agp
I've tried different xorg configs. Here is the best one. All 3 monitors are active with it (I could drag cursor over them) but only 2 (which connected to nvidia card) display DE.
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Option "Monitor-DVI-I-2" "VS"
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia"
Monitor "SAM"
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia"
Monitor "VS"
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "SAM-Screen"
Screen 1 "VS-Screen" RightOf "SAM-Screen"
Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
Option "Xinerama" "0"
EndSection
Also, xrandr shows last monitor (VGA-0, it plugged into Intel card) as disconnected
$ xrandr
Screen 0: minimum 8 x 8, current 3460 x 1440, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected 2560x1440+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
2560x1440 59.95*+
1920x1200 59.88
1920x1080 60.00 50.00
1680x1050 59.95
1600x1200 60.00
1440x900 59.89
1280x1024 75.02 60.02
1280x960 60.00
1280x800 59.81
1280x720 60.00 50.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 900x1440+2560+0 left (normal left inverted right x axis y axis) 410mm x 256mm
1440x900 59.89*+ 74.98
1280x1024 75.02 60.02
1280x960 60.00
1152x864 75.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
640x480 75.00 72.81 59.94
640x400 70.10
But it's still posible to start application on last monitor with 'env DISPLAY:=0.1 urxvt'
Here is full Xorg log file and highlights:
[ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
[ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
[ 4792.053] (EE) intel(G0): Failed to claim DRM device.
[ 4792.053] (II) UnloadModule: "intel"
[ 4789.342]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 4789.342] X Protocol Version 11, Revision 0
[ 4789.342] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 4789.342] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 4789.342] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
[ 4789.342] Build Date: 22 February 2015 12:50:32PM
[ 4789.342]
[ 4789.342] Current version of pixman: 0.32.6
[ 4789.342] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4789.342] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4789.342] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:43:55 2015
[ 4789.342] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4789.342] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4789.342] (==) ServerLayout "Layout0"
[ 4789.342] (**) |-->Screen "SAM-Screen" (0)
[ 4789.342] (**) | |-->Monitor "SAM"
[ 4789.343] (**) | |-->Device "nvidia"
[ 4789.343] (**) |-->Screen "VS-Screen" (1)
[ 4789.343] (**) | |-->Monitor "VS"
[ 4789.343] (**) | |-->Device "nvidia"
[ 4789.343] (**) |-->Screen "BNQ-Screen" (2)
[ 4789.343] (**) | |-->Monitor "BNQ"
[ 4789.343] (**) | |-->Device "intel"
[ 4789.343] (**) Option "Xinerama" "0"
[ 4789.343] (==) Automatically adding devices
[ 4789.343] (==) Automatically enabling devices
[ 4789.343] (==) Automatically adding GPU devices
[ 4789.343] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 4789.343] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4789.343] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4789.343] (II) Loader magic: 0x815d80
[ 4789.343] (II) Module ABI versions:
[ 4789.343] X.Org ANSI C Emulation: 0.4
[ 4789.343] X.Org Video Driver: 19.0
[ 4789.343] X.Org XInput driver : 21.0
[ 4789.343] X.Org Server Extension : 9.0
[ 4789.344] (EE) systemd-logind: failed to get session: PID 10086 does not belong to any known session
[ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4789.345] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4789.347] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4789.347] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4789.347] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4789.347] (II) LoadModule: "glx"
[ 4789.347] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4789.359] (II) Module glx: vendor="NVIDIA Corporation"
[ 4789.359] compiled for 4.0.2, module version = 1.0.0
[ 4789.359] Module class: X.Org Server Extension
[ 4789.359] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 4789.359] (II) LoadModule: "nvidia"
[ 4789.359] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4789.360] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4789.360] compiled for 4.0.2, module version = 1.0.0
[ 4789.360] Module class: X.Org Video Driver
[ 4789.360] (II) LoadModule: "intel"
[ 4789.360] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4789.360] (II) Module intel: vendor="X.Org Foundation"
[ 4789.360] compiled for 1.17.1, module version = 2.99.917
[ 4789.360] Module class: X.Org Video Driver
[ 4789.360] ABI class: X.Org Video Driver, version 19.0
[ 4789.360] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 4789.360] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4789.360] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 4789.360] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 4789.360] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 4789.360] (++) using VT number 7
[ 4789.471] (II) Loading sub module "fb"
[ 4789.471] (II) LoadModule: "fb"
[ 4789.471] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4789.471] (II) Module fb: vendor="X.Org Foundation"
[ 4789.471] compiled for 1.17.1, module version = 1.0.0
[ 4789.471] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4789.472] (II) Loading sub module "wfb"
[ 4789.472] (II) LoadModule: "wfb"
[ 4789.472] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4789.472] (II) Module wfb: vendor="X.Org Foundation"
[ 4789.472] compiled for 1.17.1, module version = 1.0.0
[ 4789.472] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4789.472] (II) Loading sub module "ramdac"
[ 4789.472] (II) LoadModule: "ramdac"
[ 4789.472] (II) Module "ramdac" already built-in
[ 4789.473] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 4789.474] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140905
[ 4789.474] (II) NVIDIA(0): Creating default Display subsection in Screen section
"SAM-Screen" for depth/fbbpp 24/32
[ 4789.474] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4789.474] (==) NVIDIA(0): RGB weight 888
[ 4789.474] (==) NVIDIA(0): Default visual is TrueColor
[ 4789.474] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4789.474] (**) NVIDIA(0): Enabling 2D acceleration
[ 4789.841] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4789.842] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4789.842] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 4789.842] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
[ 4789.842] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4789.875] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4789.875] (--) NVIDIA(0): CRT-0
[ 4789.875] (--) NVIDIA(0): CRT-1
[ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4789.875] (--) NVIDIA(0): DFP-1
[ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
[ 4789.875] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4789.875] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4789.875] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4789.875] (**) NVIDIA(0): Option "Rotate" "left"
[ 4789.875] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4789.875] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4789.875] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4789.875] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.875] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4789.875] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.875] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.875] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.876] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4789.876] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4789.876] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4789.876] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4789.876] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4789.876] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4789.877] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4789.877] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4789.877] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4789.878] (==) NVIDIA(0):
[ 4789.878] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4789.878] (==) NVIDIA(0): will be used as the requested mode.
[ 4789.878] (==) NVIDIA(0):
[ 4789.878] (II) NVIDIA(0): Validated MetaModes:
[ 4789.878] (II) NVIDIA(0):
[ 4789.878] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
[ 4789.878] (II) NVIDIA(0): Virtual screen size determined to be 3460 x 1440
[ 4789.905] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 4789.905] (--) NVIDIA(0): option
[ 4789.906] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
[ 4789.906] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 4789.906] (II) intel(1): Creating default Display subsection in Screen section
"BNQ-Screen" for depth/fbbpp 24/32
[ 4789.906] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[ 4789.906] (==) intel(1): RGB weight 888
[ 4789.906] (==) intel(1): Default visual is TrueColor
[ 4789.906] (**) intel(1): Option "AccelMethod" "none"
[ 4789.906] (II) intel(1): Output VGA1 using monitor section BNQ
[ 4789.906] (**) intel(1): Option "LeftOf" "SAM"
[ 4789.906] (**) intel(1): Option "Rotate" "left"
[ 4789.906] (II) intel(1): Enabled output VGA1
[ 4789.906] (II) intel(1): Output HDMI1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI1
[ 4789.906] (II) intel(1): Output DP1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP1
[ 4789.906] (II) intel(1): Output HDMI2 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI2
[ 4789.906] (II) intel(1): Output HDMI3 has no monitor section
[ 4789.906] (II) intel(1): Enabled output HDMI3
[ 4789.906] (II) intel(1): Output DP2 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP2
[ 4789.906] (II) intel(1): Output DP3 has no monitor section
[ 4789.906] (II) intel(1): Enabled output DP3
[ 4789.906] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
[ 4789.906] (II) intel(1): Output VIRTUAL1 has no monitor section
[ 4789.906] (II) intel(1): Enabled output VIRTUAL1
[ 4789.906] (II) intel(1): EDID for output DP1
[ 4789.906] (II) intel(1): EDID for output DP2
[ 4789.906] (II) intel(1): EDID for output DP3
[ 4789.906] (II) intel(1): EDID for output HDMI1
[ 4789.906] (II) intel(1): EDID for output HDMI2
[ 4789.907] (II) intel(1): EDID for output HDMI3
[ 4789.920] (II) intel(1): EDID for output VGA1
[ 4789.920] (II) intel(1): Manufacturer: BNQ Model: 7659 Serial#: 28
[ 4789.920] (II) intel(1): Year: 2003 Week: 39
[ 4789.920] (II) intel(1): EDID Version: 1.3
[ 4789.920] (II) intel(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 4789.920] (II) intel(1): Sync: Separate Composite
[ 4789.920] (II) intel(1): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 4789.920] (II) intel(1): Gamma: 2.20
[ 4789.920] (II) intel(1): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 4789.920] (II) intel(1): First detailed timing is preferred mode
[ 4789.920] (II) intel(1): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.611
[ 4789.920] (II) intel(1): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
[ 4789.920] (II) intel(1): Supported established timings:
[ 4789.920] (II) intel(1): 720x400@70Hz
[ 4789.920] (II) intel(1): 640x480@60Hz
[ 4789.920] (II) intel(1): 640x480@67Hz
[ 4789.920] (II) intel(1): 640x480@72Hz
[ 4789.920] (II) intel(1): 640x480@75Hz
[ 4789.920] (II) intel(1): 800x600@56Hz
[ 4789.920] (II) intel(1): 800x600@60Hz
[ 4789.920] (II) intel(1): 800x600@72Hz
[ 4789.920] (II) intel(1): 800x600@75Hz
[ 4789.920] (II) intel(1): 832x624@75Hz
[ 4789.920] (II) intel(1): 1024x768@60Hz
[ 4789.920] (II) intel(1): 1024x768@70Hz
[ 4789.920] (II) intel(1): 1024x768@75Hz
[ 4789.920] (II) intel(1): 1280x1024@75Hz
[ 4789.920] (II) intel(1): 1152x864@75Hz
[ 4789.920] (II) intel(1): Manufacturer's mask: 0
[ 4789.920] (II) intel(1): Supported standard timings:
[ 4789.920] (II) intel(1): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4789.920] (II) intel(1): #1: hsize: 1280 vsize 1024 refresh: 76 vid: 36993
[ 4789.920] (II) intel(1): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4789.920] (II) intel(1): #3: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
[ 4789.920] (II) intel(1): Supported detailed timing:
[ 4789.920] (II) intel(1): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 4789.920] (II) intel(1): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 4789.920] (II) intel(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 4789.920] (II) intel(1): Supported detailed timing:
[ 4789.920] (II) intel(1): clock: 25.2 MHz Image Size: 304 x 228 mm
[ 4789.920] (II) intel(1): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
[ 4789.920] (II) intel(1): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
[ 4789.920] (II) intel(1): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[ 4789.920] (II) intel(1): Monitor name: BenQ FP737s
[ 4789.920] (II) intel(1): EDID (in hex):
[ 4789.920] (II) intel(1): 00ffffffffffff0009d159761c000000
[ 4789.920] (II) intel(1): 270d01036c221b78eac6f6a3574a9c23
[ 4789.920] (II) intel(1): 114f54bfef80714f81908180818c0101
[ 4789.920] (II) intel(1): 010101010101302a009851002a403070
[ 4789.920] (II) intel(1): 1300520e1100001ed50980a0205e6310
[ 4789.920] (II) intel(1): 1060520830e41000001a000000fd0038
[ 4789.920] (II) intel(1): 4b1f510e000a202020202020000000fc
[ 4789.920] (II) intel(1): 0042656e51204650373337730a200072
[ 4789.920] (II) intel(1): Printing probed modes for output VGA1
[ 4789.920] (II) intel(1): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x76.0 141.81 1280 1376 1512 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 4789.920] (II) intel(1): Modeline "1280x1024"x72.0 132.84 1280 1368 1504 1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz)
[ 4789.920] (II) intel(1): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4789.920] (II) intel(1): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): Modeline "640x350"x70.1 25.17 640 656 752 800 350 387 389 449 +hsync -vsync (31.5 kHz e)
[ 4789.920] (II) intel(1): EDID for output VIRTUAL1
[ 4789.920] (II) intel(1): Output DP1 disconnected
[ 4789.920] (II) intel(1): Output DP2 disconnected
[ 4789.920] (II) intel(1): Output DP3 disconnected
[ 4789.920] (II) intel(1): Output HDMI1 disconnected
[ 4789.920] (II) intel(1): Output HDMI2 disconnected
[ 4789.920] (II) intel(1): Output HDMI3 disconnected
[ 4789.920] (II) intel(1): Output VGA1 connected
[ 4789.920] (II) intel(1): Output VIRTUAL1 disconnected
[ 4789.920] (II) intel(1): Using user preference for initial modes
[ 4789.920] (II) intel(1): Output VGA1 using initial mode 1280x1024
[ 4789.920] (EE) intel(1): Cannot position output VGA1 relative to unknown output SAM
[ 4789.920] (II) intel(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4789.920] (==) intel(1): TearFree disabled
[ 4789.920] (==) intel(1): DPI set to (96, 96)
[ 4789.920] (II) Loading sub module "dri2"
[ 4789.920] (II) LoadModule: "dri2"
[ 4789.920] (II) Module "dri2" already built-in
[ 4789.920] (II) Loading sub module "present"
[ 4789.920] (II) LoadModule: "present"
[ 4789.920] (II) Module "present" already built-in
[ 4792.053] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 4792.053] (II) intel(G0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[ 4792.053] (II) intel(G0): [drm] command pid dev master a uid magic
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 y y 0 0
[ 4792.053] (II) intel(G0): [drm] Xorg 10086 0 n y 0 0
[ 4792.053] (EE) intel(G0): Failed to claim DRM device.
[ 4792.053] (II) UnloadModule: "intel"
[ 4792.053] (--) Depth 24 pixmap format is 32 bpp
[ 4792.053] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 4792.053] (II) NVIDIA: access.
[ 4792.057] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 4792.057] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 4792.057] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 4792.057] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 4792.057] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 4792.057] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 4792.057] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 4792.057] (II) NVIDIA(0): Config Options in the README.
[ 4792.091] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-2:nvidia-auto-select{Rotation=90}"
[ 4792.264] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 4792.264] (==) NVIDIA(0): Backing store enabled
[ 4792.264] (==) NVIDIA(0): Silken mouse enabled
[ 4792.264] (**) NVIDIA(0): DPMS enabled
[ 4792.264] (II) Loading sub module "dri2"
[ 4792.264] (II) LoadModule: "dri2"
[ 4792.264] (II) Module "dri2" already built-in
[ 4792.264] (II) NVIDIA(0): [DRI2] Setup complete
[ 4792.264] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 4792.264] (--) RandR disabled
[ 4792.264] (II) intel(1): SNA initialized with disabled backend
[ 4792.264] (==) intel(1): Backing store enabled
[ 4792.264] (==) intel(1): Silken mouse enabled
[ 4792.264] (II) intel(1): HW Cursor enabled
[ 4792.264] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4792.264] (**) intel(1): DPMS enabled
[ 4792.264] (==) intel(1): display hotplug detection enabled
[ 4792.264] (II) intel(1): Textured video not supported on this hardware
[ 4792.264] (WW) intel(1): loading DRI2 whilst the GPU is wedged.
[ 4792.264] (II) intel(1): [DRI2] Setup complete
[ 4792.264] (II) intel(1): [DRI2] DRI driver: i965
[ 4792.264] (II) intel(1): [DRI2] VDPAU driver: i965
[ 4792.264] (II) intel(1): direct rendering: DRI2 enabled
[ 4792.265] (II) intel(1): hardware support for Present enabled
[ 4792.265] (WW) intel(1): Option "Monitor-VGA-0" is not used
[ 4792.265] (WW) intel(1): Option "LeftOf" is not used
[ 4792.265] (WW) intel(1): Option "Rotate" is not used
[ 4792.265] (--) RandR disabled
[ 4792.268] (II) Initializing extension GLX
[ 4792.268] (II) Indirect GLX disabled.(II) intel(1): switch to mode [email protected] on VGA1 using pipe 0, position (0, 0), rotation left, reflection none
[ 4792.332] (II) intel(1): Setting screen physical size to 270 x 338
[ 4792.386] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4792.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4792.386] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4792.386] (**) Power Button: Applying InputClass "system-keyboard"
[ 4792.386] (II) LoadModule: "libinput"
[ 4792.386] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 4792.387] (II) Module libinput: vendor="X.Org Foundation"
[ 4792.387] compiled for 1.17.1, module version = 0.7.0
[ 4792.387] Module class: X.Org XInput Driver
[ 4792.387] ABI class: X.Org XInput driver, version 21.0
[ 4792.387] (II) Using input driver 'libinput' for 'Power Button'
[ 4792.387] (**) Power Button: always reports core events
[ 4792.387] (**) Option "Device" "/dev/input/event2"
[ 4792.387] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4792.387] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4792.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 4792.399] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4792.399] (**) Option "xkb_model" "pc104"
[ 4792.399] (**) Option "xkb_layout" "us,ru"
[ 4792.399] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.432] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 4792.432] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 4792.432] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 4792.432] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4792.432] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 4792.432] (**) Power Button: Applying InputClass "system-keyboard"
[ 4792.432] (II) Using input driver 'libinput' for 'Power Button'
[ 4792.432] (**) Power Button: always reports core events
[ 4792.432] (**) Option "Device" "/dev/input/event1"
[ 4792.433] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 4792.433] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 4792.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 4792.489] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 4792.489] (**) Option "xkb_model" "pc104"
[ 4792.489] (**) Option "xkb_layout" "us,ru"
[ 4792.489] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.490] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 4792.490] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event0)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.490] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[ 4792.490] (II) No input driver specified, ignoring this device.
[ 4792.490] (II) This device may have been added with another device file.
[ 4792.491] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[ 4792.491] (II) No input driver specified, ignoring this device.
[ 4792.491] (II) This device may have been added with another device file.
[ 4792.491] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event3)
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.491] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.491] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.491] (**) Option "Device" "/dev/input/event3"
[ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
[ 4792.491] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
[ 4792.554] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:045E:07B2.0004/input/input24/event3"
[ 4792.554] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 8)
[ 4792.554] (**) Option "xkb_model" "pc104"
[ 4792.554] (**) Option "xkb_layout" "us,ru"
[ 4792.554] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is tagged by udev as: Keyboard
[ 4792.554] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event3 is a keyboard
[ 4792.555] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event4)
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev pointer catchall"
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[ 4792.555] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.555] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.555] (**) Option "Device" "/dev/input/event4"
[ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
[ 4792.555] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
[ 4792.609] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:045E:07B2.0005/input/input25/event4"
[ 4792.610] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 9)
[ 4792.610] (**) Option "AccelerationScheme" "none"
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[ 4792.610] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is tagged by udev as: Mouse
[ 4792.610] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event4 is a pointer caps
[ 4792.610] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse0)
[ 4792.610] (II) No input driver specified, ignoring this device.
[ 4792.610] (II) This device may have been added with another device file.
[ 4792.611] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event5)
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "evdev keyboard catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "joystick catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.611] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[ 4792.611] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[ 4792.611] (**) Option "Device" "/dev/input/event5"
[ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
[ 4792.611] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
[ 4792.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:045E:07B2.0006/input/input26/event5"
[ 4792.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 10)
[ 4792.676] (**) Option "xkb_model" "pc104"
[ 4792.676] (**) Option "xkb_layout" "us,ru"
[ 4792.676] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is tagged by udev as: Keyboard Joystick
[ 4792.676] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event5 is a keyboard
[ 4792.677] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js0)
[ 4792.677] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "system-keyboard"
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.677] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 4792.677] (II) No input driver specified, ignoring this device.
[ 4792.677] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.678] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[ 4792.678] (II) No input driver specified, ignoring this device.
[ 4792.678] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[ 4792.679] (II) No input driver specified, ignoring this device.
[ 4792.679] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[ 4792.679] (II) No input driver specified, ignoring this device.
[ 4792.679] (II) This device may have been added with another device file.
[ 4792.679] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event16)
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 4792.679] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 4792.679] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 4792.679] (**) Eee PC WMI hotkeys: always reports core events
[ 4792.679] (**) Option "Device" "/dev/input/event16"
[ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
[ 4792.679] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
[ 4792.712] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input19/event16"
[ 4792.712] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 4792.712] (**) Option "xkb_model" "pc104"
[ 4792.713] (**) Option "xkb_layout" "us,ru"
[ 4792.713] (**) Option "xkb_options" "caps:swapescape,grp:toggle"
[ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is tagged by udev as: Keyboard
[ 4792.713] (II) input device 'Eee PC WMI hotkeys', /dev/input/event16 is a keyboard
[ 4793.050] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.050] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.050] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.081] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.081] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.081] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.081] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.081] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.081] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.081] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4793.129] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.129] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.129] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.160] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.160] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.160] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.160] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.160] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.160] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.160] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.160] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4793.229] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.229] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4793.229] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.259] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4793.259] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4793.259] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4793.259] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4793.259] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4793.259] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4793.259] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4793.259] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4849.763] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4849.763] (**) NVIDIA(0): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4849.763] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4849.794] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4849.794] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4849.794] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4849.794] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.794] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4849.794] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.794] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.794] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.795] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4849.795] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4849.795] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4849.795] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4849.795] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4849.795] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
I also tried other configs, but neither of them made me happy:
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia-sam"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Screen 0
EndSection
Section "Device"
Identifier "nvidia-vs"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-2" "VS"
Screen 1
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
Screen 2
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia-sam"
Monitor "SAM"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia-vs"
Monitor "VS"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "SAM-Screen"
Screen 1 "VS-Screen" RightOf "SAM-Screen"
Screen 2 "BNQ-Screen" LeftOf "SAM-Screen"
Option "Xinerama" "0"
EndSection
[ 4488.527]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 4488.527] X Protocol Version 11, Revision 0
[ 4488.527] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 4488.527] Current Operating System: Linux earth 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 4488.527] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dc49b07c-e67c-4b6f-91f7-7c1adc050e21 rw quiet ipv6.disable=1 init=/usr/lib/systemd/systemd security=tomoyo TOMOYO_trigger=/usr/lib/systemd/systemd
[ 4488.527] Build Date: 22 February 2015 12:50:32PM
[ 4488.527]
[ 4488.527] Current version of pixman: 0.32.6
[ 4488.527] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4488.527] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4488.527] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 1 14:38:54 2015
[ 4488.527] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4488.527] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4488.528] (==) ServerLayout "Layout0"
[ 4488.528] (**) |-->Screen "SAM-Screen" (0)
[ 4488.528] (**) | |-->Monitor "SAM"
[ 4488.528] (**) | |-->Device "nvidia-sam"
[ 4488.528] (**) |-->Screen "VS-Screen" (1)
[ 4488.528] (**) | |-->Monitor "VS"
[ 4488.528] (**) | |-->Device "nvidia-vs"
[ 4488.528] (**) |-->Screen "BNQ-Screen" (2)
[ 4488.528] (**) | |-->Monitor "BNQ"
[ 4488.528] (**) | |-->Device "intel"
[ 4488.528] (**) Option "Xinerama" "0"
[ 4488.528] (==) Automatically adding devices
[ 4488.528] (==) Automatically enabling devices
[ 4488.528] (==) Automatically adding GPU devices
[ 4488.528] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 4488.528] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4488.528] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4488.528] (II) Loader magic: 0x815d80
[ 4488.528] (II) Module ABI versions:
[ 4488.528] X.Org ANSI C Emulation: 0.4
[ 4488.528] X.Org Video Driver: 19.0
[ 4488.528] X.Org XInput driver : 21.0
[ 4488.528] X.Org Server Extension : 9.0
[ 4488.529] (EE) systemd-logind: failed to get session: PID 32224 does not belong to any known session
[ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4488.530] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4488.531] (--) PCI: (0:0:2:0) 8086:0102:1043:84ca rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 4488.531] (--) PCI:*(0:1:0:0) 10de:1200:10b0:0401 rev 161, Mem @ 0xf4000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 4488.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4488.531] (II) LoadModule: "glx"
[ 4488.531] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4488.542] (II) Module glx: vendor="NVIDIA Corporation"
[ 4488.542] compiled for 4.0.2, module version = 1.0.0
[ 4488.542] Module class: X.Org Server Extension
[ 4488.542] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 4488.542] (II) LoadModule: "nvidia"
[ 4488.542] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4488.543] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4488.543] compiled for 4.0.2, module version = 1.0.0
[ 4488.543] Module class: X.Org Video Driver
[ 4488.543] (II) LoadModule: "modesetting"
[ 4488.543] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 4488.543] (II) Module modesetting: vendor="X.Org Foundation"
[ 4488.543] compiled for 1.17.1, module version = 1.17.1
[ 4488.543] Module class: X.Org Video Driver
[ 4488.543] ABI class: X.Org Video Driver, version 19.0
[ 4488.543] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 4488.543] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4488.543] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4488.543] (++) using VT number 7
[ 4488.645] (II) Loading sub module "fb"
[ 4488.645] (II) LoadModule: "fb"
[ 4488.645] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4488.645] (II) Module fb: vendor="X.Org Foundation"
[ 4488.646] compiled for 1.17.1, module version = 1.0.0
[ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4488.646] (II) Loading sub module "wfb"
[ 4488.646] (II) LoadModule: "wfb"
[ 4488.646] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4488.646] (II) Module wfb: vendor="X.Org Foundation"
[ 4488.646] compiled for 1.17.1, module version = 1.0.0
[ 4488.646] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4488.646] (II) Loading sub module "ramdac"
[ 4488.646] (II) LoadModule: "ramdac"
[ 4488.646] (II) Module "ramdac" already built-in
[ 4488.647] (II) modeset(2): using drv /dev/dri/card0
[ 4488.647] (II) modeset(G0): using drv /dev/dri/card0
[ 4488.647] (EE) Screen 2 deleted because of no matching config section.
[ 4488.647] (II) UnloadModule: "modesetting"
[ 4488.647] (II) NVIDIA(0): Creating default Display subsection in Screen section
"SAM-Screen" for depth/fbbpp 24/32
[ 4488.647] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4488.647] (==) NVIDIA(0): RGB weight 888
[ 4488.647] (==) NVIDIA(0): Default visual is TrueColor
[ 4488.647] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4488.648] (II) NVIDIA(1): Creating default Display subsection in Screen section
"VS-Screen" for depth/fbbpp 24/32
[ 4488.648] (**) NVIDIA(0): Enabling 2D acceleration
[ 4489.049] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 4489.050] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4489.050] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 4489.050] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.00
[ 4489.050] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4489.082] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4489.082] (--) NVIDIA(0): CRT-0
[ 4489.082] (--) NVIDIA(0): CRT-1
[ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4489.082] (--) NVIDIA(0): DFP-1
[ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2) (connected)
[ 4489.082] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4489.082] (--) NVIDIA(0): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4489.082] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4489.083] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4489.083] (**) NVIDIA(0): device Samsung SMS27A850 (DFP-0) (Using EDID frequencies
[ 4489.083] (**) NVIDIA(0): has been enabled on all display devices.)
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
[ 4489.083] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850 (DFP-0) contradicts itself:
[ 4489.083] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
[ 4489.083] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
[ 4489.083] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
[ 4489.083] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
[ 4489.084] (==) NVIDIA(0):
[ 4489.084] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4489.084] (==) NVIDIA(0): will be used as the requested mode.
[ 4489.084] (==) NVIDIA(0):
[ 4489.084] (II) NVIDIA(0): Validated MetaModes:
[ 4489.084] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 4489.084] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1440
[ 4489.113] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
[ 4489.113] (--) NVIDIA(0): option
[ 4489.114] (==) NVIDIA(1): Depth 24, (==) framebuffer bpp 32
[ 4489.114] (==) NVIDIA(1): RGB weight 888
[ 4489.114] (==) NVIDIA(1): Default visual is TrueColor
[ 4489.114] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 4489.114] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0)
[ 4489.114] (--) NVIDIA(1): Memory: 1048576 kBytes
[ 4489.114] (--) NVIDIA(1): VideoBIOS: 70.24.21.00.00
[ 4489.114] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 4489.146] (--) NVIDIA(1): Valid display device(s) on GeForce GTX 560 Ti at PCI:1:0:0
[ 4489.146] (--) NVIDIA(1): CRT-0
[ 4489.146] (--) NVIDIA(1): CRT-1
[ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0) (boot, connected)
[ 4489.146] (--) NVIDIA(1): DFP-1
[ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2) (connected)
[ 4489.146] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): Samsung SMS27A850 (DFP-0): Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): Samsung SMS27A850 (DFP-0): 330.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): DFP-1: Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 4489.146] (--) NVIDIA(1): ViewSonic VG1930wm (DFP-2): Internal TMDS
[ 4489.146] (--) NVIDIA(GPU-0): ViewSonic VG1930wm (DFP-2): 330.0 MHz maximum pixel clock
[ 4489.146] (**) NVIDIA(1): Option "Rotate" "left"
[ 4489.146] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4489.146] (**) NVIDIA(1): device ViewSonic VG1930wm (DFP-2) (Using EDID frequencies
[ 4489.146] (**) NVIDIA(1): has been enabled on all display devices.)
[ 4489.147] (==) NVIDIA(1):
[ 4489.147] (==) NVIDIA(1): No modes were requested; the default mode "nvidia-auto-select"
[ 4489.147] (==) NVIDIA(1): will be used as the requested mode.
[ 4489.147] (==) NVIDIA(1):
[ 4489.147] (II) NVIDIA(1): Validated MetaModes:
[ 4489.147] (II) NVIDIA(1): "DFP-2:nvidia-auto-select{Rotation=90}"
[ 4489.147] (II) NVIDIA(1): Virtual screen size determined to be 900 x 1440
[ 4489.150] (--) NVIDIA(1): DPI set to (55, 140); computed from "UseEdidDpi" X config
[ 4489.150] (--) NVIDIA(1): option
[ 4489.150] (EE)
[ 4489.150] (EE) Backtrace:
[ 4489.151] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 4489.151] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7f64dd88653f]
[ 4489.151] (EE) 2: /usr/lib/xorg-server/Xorg (xf86nameCompare+0x19) [0x4a9159]
[ 4489.151] (EE) 3: /usr/lib/xorg-server/Xorg (xf86findOption+0x2c) [0x4a2c6c]
[ 4489.151] (EE) 4: /usr/lib/xorg-server/Xorg (xf86SetDepthBpp+0x430) [0x4828d0]
[ 4489.151] (EE) 5: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x25e1) [0x7f64d695aab1]
[ 4489.151] (EE) 6: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 4489.151] (EE) 7: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 4489.152] (EE) 8: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f64dd873800]
[ 4489.152] (EE) 9: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 4489.152] (EE) 10: ? (?+0x29) [0x29]
[ 4489.152] (EE)
[ 4489.152] (EE) Segmentation fault at address 0x231
[ 4489.152] (EE)
Fatal server error:
[ 4489.152] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 4489.152] (EE)
[ 4489.152] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4489.152] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4489.152] (EE)
[ 4489.295] (EE) Server terminated with error (1). Closing log file.
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "SAM"
ModelName "Samsung SMS27A850"
HorizSync 30.0 - 90.0
VertRefresh 56.0 - 75.0
Option "DPMS"
DisplaySize 597 336 # In millimeters
EndSection
Section "Monitor"
Identifier "VS"
ModelName "ViewSonic VG1930wm"
Option "DPMS"
Option "RightOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Monitor"
Identifier "BNQ"
ModelName "BenQ FP737s"
Option "DPMS"
Option "LeftOf" "SAM"
Option "Rotate" "left"
EndSection
Section "Device"
Identifier "nvidia-sam"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-1" "SAM"
Screen 0
EndSection
Section "Device"
Identifier "nvidia-vs"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 560 Ti"
BusID "01:00:0"
Option "Monitor-DVI-I-2" "VS"
Screen 1
EndSection
Section "Device"
Identifier "intel"
Driver "intel"
Option "AccelMethod" "none"
VendorName "Intel"
BoardName "Intel Integrated Graphic Controller"
BusID "00:02:0"
Option "Monitor-VGA-0" "BNQ"
Screen 2
EndSection
Section "Screen"
Identifier "SAM-Screen"
Device "nvidia-sam"
Monitor "SAM"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "VS-Screen"
Device "nvidia-vs"
Monitor "VS"
#DefaultDepth 24
# Option "Stereo" "0"
# Option "SLI" "Off"
# Option "MultiGPU" "Off"
# Option "BaseMosaic" "off"
#Option "AllowEmptyInitialConfiguration"
# SubSection "Display"
# Depth 24
# EndSubSection
EndSection
Section "Screen"
Identifier "BNQ-Screen"
Device "intel"
Monitor "BNQ"
EndSection
SectionHi:
There is a specific order you need to install the graphics drivers for the notebooks with the nvidia/intel graphics.
1. Install the Intel chipset installation utility and reboot. If the one on your notebook's support page doesn't work, use this one.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816
2. Install the Intel HD graphics driver and reboot. If the one on your notebook's suport page doesn't work, try this one.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24348
3. Install the nVidia HD graphics driver and reboot. If the one on your notebook's support page doesn't work, try this one.
http://www.nvidia.com/download/driverResults.aspx/81879/en-us -
Wireless Display not working on my HP ProBook 640
hi,
I have tried so many fixes and spent around 3 hours still the wireless display does now work on my PC.
PC : HP ProBook 640
Processor : Intel(R) Core(TM) i7-4702MQ CPU @ 2.20 GHz 2.20 GHz
OS : Windows 8.1 Pro (64-bit)
Wireless driver : Intel(R) Centrino(R) Advanced-N 6235
Graphics Adapter : Intel(R) HD Graphics 4600
All configuration seems perfect and supporting Intel WiDi.
But when I went to charm-bar>Devices>Project , I can't see the "Add wireless display"
Please let me know, how to troubleshoot it one by one.Hi,
According to the blog below:
Wireless display is available on most new Windows 8.1 PCs, but some PC manufacturers might choose not to include it on some new and upgraded PCs. Specifically, your PC needs WDDM 1.3 display and NDIS 6.4 Wi-Fi drivers, enabled by the IHV and OEM for Miracast.
If you don’t see “Add a wireless display” when you tap the Device charm and tap Project, try going to Windows Update and downloading all available updates (including optional drivers). If you still don’t see it, check for additional updates
on your PC manufacturer’s support site, or contact them to ask how you can get this feature on your PC.
For more details:
http://blogs.windows.com/windows/b/windowsexperience/archive/2013/11/12/windows-8-1-on-your-big-screen-with-miracast.aspx
Yolanda Zhu
TechNet Community Support
Maybe you are looking for
-
Can't Put Movie into my iTunes Libarary or iPod Video(5g)
I recently converted a video to mp4 using ImTOO DVD to iPod Converter. It's in the mp4 format and should be perfect to be put into iTunes. Well when I try sticking it in there it says that it can't be played on my iPod or something like that. How can
-
Hi, I'm trying to have numbers calculating an average based on the actual day of the year. I have a table with a lot of data for a lot of days within the year and would like to know the current average per day. I think I have to have one cell that gi
-
Hi all, I installed EP 6.0 on J2EE 6.3 SP7. When i try to deploy webdynpro application i am getting the following error.I checked in the server and everything seems to be Ok. <i>Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2004.10.09
-
Accidently placed Iphoto in trash and took it back out. Now it does not work
I accidently placed my iphoto in the trash and then removed it. Now it will not work and none of my albums will show. How do I fix this?
-
Website box says, ' this connection is untrusted, can't confirm it's secure'.
I'm trying to open a secure website. a box comes up, it reads: 'this connection is untrusted... can't confirm connection is secure... this sites identity can't be verified... this error could mean someone is trying to impersonate the site.' I called