Probook 6450b

I am having problems finding the driveers for my laptop "Probook 6450b".  I am running windows 7 home pro 64 & under device drivers i get the following:
PCI Slot 2 (PCI bus 67, device 0, function 2)
The drivers for this device are not installed. (Code 28)
Need help to find device drivers.
I installed windows 7 from a new cd w new hard drive. Don't have the original cd's for the laptop.

I have a driver problem too after installed a 32 bit version of Windows 7.
After i search for the drivers by my product ID, the recommended page is gives an error : "Could Not Open Page"
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=4173643&lang=en&lang=en&cc=us&cc=us
How can i get the drivers without this page?
Gergo

Similar Messages

  • Synaptic touchpad stops working now and then on ProBook 6450b

    The touchpad on my ProBook 6450b stops working every now and then. It just freezes, no error message or anything. It always works again after I reboot. It also starts working immediately if I go to the Task Manager and kill SynTPEnh.exe and then restart SynTPEnh.exe via Explorer (C:\Program Files\Synaptic\SynTP\SynTPEnh.exe). I have had this machine for 9 months, and these problems started only a couple of weeks ago. There are no error messages, and Device Manager says the device is working properly even when the touchpad is frozen. Sometimes I can go days without having a freeze, sometimes multiple freezes within minutes. Also, it happens during different activities - web browsing, watching movies, etc.
    I'm not sure, but I might have enabled the WiFi-card in the BIOS prior to having these problems. However, as I currently need wireless, disabling it again is not an option. 
    I tried updating the BIOS, but the installation program wouldn't detect my SanDisk Cruzer USB stick, so I couldn't make a backup and decided to abort the procedure. I also tried installing another version of the Synaptic driver (can't remember the version, but it said "Evaluation Copy" on the Synaptic device in the Control Panel). It worked for a couple of days, then I got the old freeze again.
    My setup:
    HP ProBook 6450b
    Windows 7 Professional 32-bit
    Synaptic driver version 15.0.24

    As a "quick'n'dirty" solution, I figured out how to automate this process. Simply create a new textfile called "Restart Synaptics.bat" and enter the following into it:
    taskkill /IM SynTPEnh.exe /F
    "C:\Program Files\Synaptics\SynTP\SynTPEnh.exe"
    This will kill the SynTPEnh.exe process and then restart it. Now put a shortcut to your batch file in the Start Menu for easy access.

  • ESATA Port = eSATAp on ProBook 6450b?

    Hi there,
    I hava a ProBook 6450b.
    Does the installed comboport eSATA / USB2.0 offer eSATAp compatibilty?
    Background:
    I want to replace the installed 320GB SATA HDD by a ~120GB SSD.
    Then I would like to continue using the HDD as external drive.
    I would like to use it in an external case with eSATAp connection to skip the external power supply for the case/HDD...
    Thank you in advance for any help! :-)
    best regards
    Andreas

    You may want to try the business boards found at the following link.
    http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Hp probook 6450b web cam installation

    I have HP probook 6450b without webcam . i just wanna know can i fix a webcam on it. It looks the place for web cam is covered with small patch.

    Hi,
    You will need MANY things, not just a hole. There are many good clip-on webcams around, they are small too. Unless you are a technican, playing around with panel, connecting cables .... won't be fun and you may end up having a piece of paper weight.
    You can find more info including part # from the following book:
       http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03471180/c03471180.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My HP Probook 6450b is OverHeating...

    My HP Probook 6450b keeps overheating and turning off  When im watching a youtube video or playing Dolphin Emulator the fan gets very hot and soon it will just shut off i need help......

    Your laptop needs internal cleaning,  dust builds up in the heatsink and fan which prevents proper cooling.  Try HWmonitor to check temperature of the processor/cpu .  Cpu cores should be under 70c, 40-50c is normal without doing much on it. 
    The best way to remove dust is to disassemble the laptop as blowing air in will only push dust everywhere else inside.  Disassembling laptops is quite tricky as many things are stacked in such a small space, also parts are sensitive to electrostatic discharges. If you are not used in doing it, I would go to a reputable computer shop to do it.  A quality thermal paste would be a good idea to be applied while the laptop is disassembled to get maximum heat transfer between processor/graphic card and the heatsink.
    If you feel confident to do it yourself, I could be of help if you need it 
    Service manual :
    http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03471180-1.pdf
    EDIT:  Luckily for you, you should only remove the keyboard and switch cover to get access to the fan,  from there you will be able to remove the fan and remove dust from the fan and heatsink, be sure to check the fan thoroughly since "hairballs" often sneak in there.  Check page 99 of the manual for disassembly 

  • Probook 6450B no driver fior USB\VID_13​8A&PID_003​C where and what is it

     have a sysprepped image for win732  have this probook 6450b
    have a unknown device in device manager i have tried installing new drivers scanning application driver cd wihtn no luck
    put the device id into goodle comes up as a finger print sensor i cabnt find ti why is this so fing diffiult  anyone have an idea thanks

    Hi,
    If it's the validity sensor driver, try the one on the link below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/S​oftwareDescription.jsp?lang=en&cc=us&prodTypeId=32​...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP probook 6450b running windows 8 display port to HDMI doesn't give any output

    Hi,
    My laptop HP probook 6450b running windows 8, display port to HDMI doesn't give any output. I gave windows+P and tried selecting duplicate/extend but no output. I even tried to change the DP to HDMI converter and the HDMI cable as well but no luck. Any help would be much appreciated.

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like you are using the Display Port on the Notebook get HDMI Ouput for better Audio and Video
    We will surely assist you with this issue
    Firstly I would like to keep you informed that the Display Port supports resolutions up to 2560 x 1600, 30-bit color depth at 60 Hz, and full HD (1920 x 1080) monitors, 24-bit color depth at 120 Hz
    NOTE: Resolutions are dependent upon monitor capability, and resolution and color depth settings.
    Please use an HP DisplayPort to HDMI Adapter for this setup. Please make sure that you are using HP Cable/Converter with the Product Number BP937AA.
    1. Please let me know if you have additional graphics card installed on your Notebook
    2. You can try download and installing the latest BIOS Update for your Notebook from the HP Website
    3. Make sure VGA Port on the Notebook is not in use when you are testing the Display Port
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Assistance With ProBook 6450b Processor Upgrade

    Friends,
    I'm having difficulty upgrading my ProBook 6450b's processor. I currently have an i5 M450 Dual Core 2.4GHz processor installed so I DL'd the spec sheet from the HP website that said this notebook can handle the Intel i7-720QM processor and I recently procured one.
    I installed the new i7 processor and re-assembled the notebook. When I powered up, the CAPS LOCK and NUM LOCK blinked four (4) times, I don't get a POST nor a BIOS message. That's a fault with the GPU, as I understand it, and nothing I did resolved the issue (I spent over 4 hours trying to research and fix it!) I decided to re-install the 'old' i5 processor to see if I actually DID blow the GPU...of course, it's working just fine - I'm using the notebook to enter this forum question right now.
    BTW, my BIOS is at the latest F.50...
    Would anyone have any suggestions? I really want to get this 'new' processor working...
    Thanks,
    BlueJacket92

    BlueJacket92 wrote:
    So after looking much more deeply into the makeup/build of my ProBook and finding only a few reputable sources from which to glean information, I've learned a few things. Namely:
    There are two graphics options available with the 6450b/6550b ProBooks. The Intel HD graphics and the ATI Mobility graphics.
    The ProBooks built with the ATI Mobility graphics option have DISCREET graphics: They have a dedicated graphics card.
    Only these models with DISCREET graphics are able to be upgraded to the i7-720QM Quad core processor.
    Of course, my ProBook 6450b was built with the Intel HD graphics and I'm not certain if I can install the ATI Mobility card in lieu of the Intel HD 4000. As it stands, I now own an i7 Quad Core processor that I can do nothing with. Would anyone know if/how I can acquire an ATI Mobility Graphics card and install it in my ProBook 6450b?
    Best resource (but you have to read ALL of the webpage to be completely informed!): http://h20564.www2.hp.com/hpsc/doc/public/display?​docId=emr_na-c02218879
    Regards,
    BlueJacket92
    You don't those either came with AMD video or Intel HD boards. To get AMD you need to get a motherboard with AMD chipset video to get the describe video. And that could be a costly upgrade.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Caps Lock/Num Lock LED blinks 5 times on bootup - HP ProBook 6450b

    Hi all members/pros, I was tasked to resolve a bootup issue on a HP ProBook 6450b and did managed to get it up and running again without much effort. The notebook Caps Lock/Num Lock LED flashes/blinks 5 times  and then pauses and blinks again 5 times. Seeked assistance on online HP support(link below) and it stated that it was a System board failure. http://support.hp.com/us-en/document/c01732674 So then I opted to swap the hard disk tand LCD monitor hardware with with another HP ProBook 6450b which is functional but display damaged as the user was a senior manager at where I worked - Boroko Motors, Papua New Guinea - and prolong downtime was not an option. Just as I was about to get under the hood, the buggered notebook deciided to spring back to live loading onto the Windows login screen. I noiced also that I was in our server room(with much cooler temperature) that may have aided the componenets on the main borad to function so I presumed the cooling system was at fault. I then got under the hood and confirmed that the fan/vents were clogged up with dust/debris which might have collected over time. Did the cleaning and after that it hasnt failed so far... Thanks all! Get the HP ProBook 6450b service manual here: http://h10032.www1.hp.com/ctg/Manual/c02760808.pdf   

    I, recently, bought a 6735b hp laptop for $100. It does the same thing as your describe. I think the motherboard overheated. So, I ordered a new motherboard from getcomputerparts.com out of China to see if it will solve the no boot problem. I'm hoping this will solve the problem. I noticed that when I first got the laptop, second hand, that the fan wasn't blowing out, and later found a lot of dust that simply blowing it out solved the air circulation problem. I think that the heat destroyed some connections to the video or hard disk drive controller chip which made my hdd light blink on and off every second or so, and also made my Optical Drive seem to blink its LED on and off, and a slight scratching sound every second, as well.
    I also, saw on Youtube.com, a video about the nvidia video chip getting connection heat damage at the solder joints, and there was a way of putting a penny with heat sink paste after 'burning' it for a couple of hours with a hot spotlight lamp with aluminum foil around the rest of the board to protect the rest of the board other than the video chip. But, this was on another hp product that failed after 1 year, no screen no POST.
    I am hoping a 'new' system board will do the trick though, and I am spending about $153 for the part delivered, and $75 to put it in at a local computer shop.
    part url:
    http://www.getcomputerparts.com/hp-compaq-6535b-6735b-series-laptop-motherboard-system-board48819400...
    Wish me luck!
    -Duane

  • HP Probook 6450b Memory upgrade issue

    Hi All,
    I appear to be having a strange issue trying to upgrade the memory in a HP 6450b probook (i5-480m & ATI card). The laptop came with 2gb of p/n sps 598856-002 which is 1333mhz 1.5v ram with the manufacturer being ramaxel. I ordered and fitted a couple of 4gb kingston sticks
    http://h30094.www3.hp.com/product/sku/10473659/mfg​_partno/KTH-X3BS/4G
    Fitted them and all seemed to be well as the OS (win 7 32bit pro) showed the stick as 8gb recognised and 3gb usable, the bios also reports 8gb as well. However the moment a 64 bit OS (Linux or Windows) is attempted to be run the laptop just crashes or hangs
    I previously attempted this upgrade with two sticks of crucial memory but had exactly the same problem, so thinking the crucial memory was the issue I returned them to the supplier and ordered the kingstons instead.
    I have seen very similar issue noted here:
    http://www.tomshardware.co.uk/forum/328016-30-memo​ry-upgrade-probook
    and
    http://superuser.com/questions/580512/hp-probook-6​450b-not-booting-after-memory-upgrade
    My gut instinct suggests this laptop may be very fussy about the memory chips, it may have to be a 16 chip 4gb stick as opposed to 8 chip 4gb sticks.
    Any thoughts and help on the matter would be greatly appreciated.
    Thanks
    This question was solved.
    View Solution.

    You're very welcome.
    Glad the lower density memory worked for you, and now you know what to look for the next time you plan on upgrading the memory on any HP notebook made in the last 8 years or so.

  • Hi, I have ProBook 6450b, I have no sound from speakers, Everything in device manager is true

    what can I do?

    Hi,
    Please enable Speakers in Playback devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP ProBook 6460b wwan card UN2420

    Hello, i have problem with wwan card. I took wwan card from HP ProBook 6550b and insert in to HP ProBook 6460b. Then i turn pc I can't find that wwan card is inserted, and drivers don't find anything, connection manager don't find anything either.
    I using win7pro.
    Wwan card UN2420.

    Hi TormentorsTorn
    I am sorry for the confusion in regards to your wireless card on your computer. I have referenced a few documents for the information in an effort to clear things up a bit for you.
    The un2420 EV-DO/HSPA Mobile Broadband Module is compatible with the HP ProBook 6550b
    Information taken from the QuickSpecs HP ProBook 6450b Notebook PC HP ProBook 6550b Notebook PC page 5 linked here.
    The un2420 EV-DO/HSPA Mobile Broadband Module is not compatible with the HP ProBook 6460b it requires the un2430 EV-DO/HSPA Mobile Broadband Module instead.
    Information take from the QuickSpecs HP ProBook 6360b Notebook PC, HP ProBook 6460b Notebook PC, and HP ProBook 6560b Notebook PC page 11 linked here.
    So to answer your question "No" the un2420 will not work correctly with your HP ProBook 6460b Notebook PC.
    Thank you for posting on the HP Forums and have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • 6450b HDD switch

    I have a Probook 6450b, win7 and fedora 17, all that stuff, and I was hoping to switch my hard drive with another I had laying around. (Reason: I use my computer at school a lot, and want to be able to swap out if I manage to get a virus) It is a Samsung Spinpoint, 320 gigs, 5400 RPM, and it has a SATA 2 interface. Everything I see says it should work, but when I tried having that in my computer as my main drive, it would not boot, abd the num/caps lock indicators began flashing. (four flashes, five, five.....) Can someone help me upgrade?
    Oh, and I am probably out of warranty, I got it used, and when I entered my serial number into supportve the 6450b promo copy. When I reinstalled win7 it said I have an i3, rather than an i5 like the first install had said. (not sure what happened here)
    This question was solved.
    View Solution.

    Hi,
    I have tried this test: I cloned my HDD to a SSD and swapping, both work like normal. I upgraded the machine with SSD to Windows 8 and now I can use Windows 7 from old HDD and Windows 8 from new SSD. The key point: you have to make BOTH HDD's the same first.
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Ovi Suite 3.1.0.84 Application Error when scrollin...

    Start Ovi Suite, login to Ovi and then start scrolling through the recommended apps. Then I get the application error attached. This has happened twice in the 1-2 hours.
    PC is an HP ProBook 6450b with 2GB of RAM. The only other applications running were Windows Explorer, Firefox and one open PDF document.
    System Info:
    Nokia Ovi Suite 3.1.0.84
    Nokia PC Suite 7.1.60.0
    PC Connectivity Solution 11.4.15.0
    Connectivity Cable Driver 7.1.41.0
    Nokia Ovi Suite Software Updater 2011.7.0.61004
    Maps Service API 4.0.28.2
    Nokia mPlatform 2.7.66
    Ovi Desktop Sync Engine 1.4.4.51
    Operating system:
    Microsoft Windows XP 32-bit Edition, Service Pack 3
    Language: English
    Detected internet browsers:
    - Microsoft Internet Explorer 8.0.6001.18702 (Default browser)
    - Mozilla Firefox 3.6.12
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.1.2600, Build: 5512), Active
    Detected USB drivers:
    - Default Hub Driver for USB 5.1.2600.5512
    - USB Modem Driver 5.1.2600.5512
    - EHCI eUSB Miniport Driver 5.1.2600.5512
    Attachments:
    NokiaOviSuite-ApplicationError.png ‏9 KB

    Just a note to say this is also happening with Ovi Suite 3.1.0.91 and I filled out a new form with a new set of NOSlogs attached. Similar to before before except perhaps the problem is less common than with 3.1.0.91.
    Attachments:
    NokiaOviSuite-ApplicationError-2011-06-04.png ‏9 KB

  • Docking station 64 bit

    Hi,
    I´ve a Probook 6450b and I´ve installed a win 7 professional 64 bit, O´ve a Docking Sation and usb ports doesn´t work, anyone have any answer??
    Thanks
    Oscar

    Hello,
    I realize this is almost a year late, but I have the exact same issue after installing Windows 7 (32-bit) on my T61p this past weekend.  I never had this problem with XP.
    I've discovered though that this only happens if I close the laptop lid.  If I keep the laptop lid open, while in its docking station, then I don't seem to have this glitch. 
    Not sure if this will help you.  I've been trying to find a permanent fix but so far no luck.  If you or anyone has got one, I'd like to hear it. 

Maybe you are looking for