Probook 6570b driver missing HPQ6000 W7 64b Ultimate

Model: HP Probook 6570b
OS:Windows 7-64bit Ultimate
Problem: driver missing
Hardware ID: ACPI\HPQ6000 *HPQ6000

Hi,
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, and then make a note of the result and include this with your next post - this will be one of the following:
No intergitry violations
Integrity violations were detected and repaired
Integrity violations were detected and unable to be repaired
Whatever the result, type exit and hit enter. Restart the notebook and try running one of the DriveGuard installers again - do you receive the same error message?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Boot Seagate Expansion Desktop Drive (2Tb) on HP ProBook 6570b

Hello All!
I currently bought a Seagate Expansion Desktop Drive (2Tb) and tried to make it a bootable drive so if I go to work and back to use it (Windows to go). On my desktop computer the drive works perfectly, boots and everything is fine, but on my laptop (HP Probook 6570b) it is not recognized as a boot device! I installed the drive from the laptop and it recognizes the drive in windows but not at boot time….
I downloaded the latest bios and installed it. (2014.08 F.50) and tried again. (Before that the laptop did not start at all if the drive was pluged in on boot!!!)
I set the boot to legacy, then UEFI and Native to but nothing. Set the priority to boot from usb drive first then flashdisk and everything that is not internal… and then Internal HDD and then network and dvd etc..
When the drive options come up with Escape/F10 there are no usb drives (if the drive is pluged in only). Tried all usb ports on the Laptop nothing. If I boot without anything pressed the Internal HDD boots normally. I plug in an usb pendrive with a bootable content on it, that boots fine, but I can’t seem to get the drive working. I checked with Seagate and they don’t have newer firmware for the drive it is up to date. So the problem would be in the Bios or the settings.
Anyone faced something similar maybe? Any help would be appreciated.
I think it will be a Bios problem... if anyone could point me to the right direction about makeing this an issue to update the ProBook 6570b bios to get it to work would be the biggest help i think
I got 10 day to bring the drive back, to the reseller to get another if this is not working, but this is not the drives fault. If anyone has a working USB HDD with Probook and windows to go and could tell me the device name that would be a great help to.
Thanks
Twiller

Anyone?

HP Probook 6570B ACPI\HPQ6000 'unknown device' win7 32bit

Please could somebody help me?
i have a HP Probook 6570b running win7 32bit and i have an unknown device ACPI\HPQ6000 and was wondering what drivers to download,
thankyou

Hi ant1994
Download:
HP Mobile Data Protection Sensor
http://h30639.www3.hp.com/pub/softpaq/sp56001-56500/sp56488.exe

Probook 6570b

I have a little problem:
I installed windows 8 64bit on my HP probook 6570b (I haven't installed other OS before).
In device manager i have two "other devices":
1. Base system device, Location: PCI Slot 2 (PCI bus 35, device 0, function 1)
2. Unknown device, Location: on PCI Express Root Complex
How can I find drivers for these devices?
This question was solved.
View Solution.

Hi:
The base system device probably needs this driver.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&...
Unknown:
I will need the hardware ID for the device.
If you don't know where to find the hardware ID, please read the info at the link below.
http://www.devicedriverfinder.com/blog/device-drivers/how-to-check-the-hardware-id-for-a-windows-dev...

Windows 7 RC installation on MacBook Pro: 'DVD drive device driver missing'

I'm trying to install the Windows 7 RC on my unibody MacBook Pro (purchased november 2008). I create the partition in Boot Camp, insert the install DVD, and restart the system. Then the Windows setup starts as it's supposed to (Windows is loading files). The install program launches fine, and I get to choose language settings.
And now it all fails. After I've chosen language settings, I get the message: "A required CD(DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now."
Screenshot of the message: http://img25.imageshack.us/my.php?image=dsc00102yyh.jpg
I'm kinda baffled by this message. Obviously the drive can be use by the install program, but it still complains of a missing driver. I had no trouble installing the Windows 7 beta earlier this year.
I've done some googling, and it appears to be problem experienced by some others. Someone had the issue on an Asus machine (I think), and the solution was to download the driver and out it on a USB stick. But I can't seem to find the driver for the MBP DVD drive anywhere.
Has anyone else experienced this issue?

After countless days trying to solve this problem, I feel I can now add to the few solutions presented on the various forums of the internet. I'll post here because 1: i'm a mac user for everyday life although like most have as many pc's as well. 2: I already have a login for these forums!
okay so i tried everything from re-burns to usb install (which I could not complete because removable drives are not recognized by xp and I don't have a vista system). The problem for me ended up being because the DVD drive was plugged into the primary master ide channel. My hard drive for the unit i was installing windows on is sata and was configured as such (not bridged into IDE channel by bios). So in a nutshell it seems like the hard drive and the DVD drive are nit picky in regards to the IDE configuration of the drives themselves. This won't help for virtualization on a mac pro I realize but nonetheless is food for thought hopefully for all the people searching for " windows 7 install cd/dvd device driver missing " in their search engine!
Oh boy one more reason to love mac's
Christos

Ralink (Mediatek) Bluetooth PCIe Adapter for Windows 8.1 driver missing

plz send me solution ralink Bluetooth PCIe Adapter for Windows 8.1 driver missing

Hi:
This is the latest W8.1 BT driver for that card.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_139921_1

Core package driver missing

I'm running Windows 7 professional and can't install my envy 5530 printer due to the above error message - have tried downloading various fixes but all require me to pay money to some comp-any that I have never heard of. Is there a simple solution to this - I have followed the suggested fixes proposed by the hp device doctor and wizard but no success. What is the windows 7 core package driver?

Hello pmak,
Welcome to the HP Support Forums!
Regarding the install issues with the ENVY 5530 on Windows 7, would it be possible to provide a screen shot of the "core package driver missing" error, this way I will be able to see if there is an error number that goes along side it?
Also, what had been the results / steps the Print and Scan Dr and the Printer Install Wizard?
additionally, what is the brand and model number of the computer?
Is this the software you are trying to install: HP ENVY 5530 e-All-in-One Printer series Full Feature Software and Drivers, or is it this: HP ENVY 5530 e-All-in-One Printer series Basic Driver?
Hope to hear back.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

ProBook 6570b, Broadcom WiFi disconnects randomly.

Dear Friends!
My ProBook 6570b is dropping WiFi connection with a router randomly.
WiFi adapter: Broadcom BCM943228HM4L 802.11a/b/g/n 2x2 WiFi Adapter
OS: Windows 8.1
Router: TP Link N600 (TL-WDR3600)
It happends this way.
After some time being online network apps like Skype or VPN Client report that network was lost.
Then the Windows icon that idicates network status shows a yellow exclamation mark.
Then if I click that Icon I see that my Wifi network has "Limited" label below the AP name.
To restore the connection I need to Disconnect from WiFi AP manually and then connect again.
When "Limited" or disconnected I also cannot access my router (pinging 192.168.0.1 fails) so I'm sire that this is wifi issue between laptop and router. At the same time all other devices are working properly. I even recorded a small screen video of how it happends, with comments: https://youtu.be/C96XtgzA9rw
There is one more strange thing. There is a checkbox "Connect automatically" in Windows Networks panel. Even if I click it before connecting it does not save its state - after connection fails again the checkbox is not checked again.
One important note is that there are four more WiFi client devices in a room using the same router without issues.
I spent much time trying to fix it but still nothing. What I did in total:
1. Tried different drivers. Currently I have version 6.30.223.170 from HP site (the latest one)
2. Replaced an adapter with a new one. The same model. Nothing changed.
3. Always install all Windows Updates it offers. Both required and optional.
4. Added my MAC address to address reservation list on a router to minimise address re-issuing.
5. Disabled Power-Off option for the adapter
6. Reset TCP/IP settings with netsh int ip reset resetlog.txt
Please help to find out the solution.

Dear All!
Is there anyone who could help to resolve this issue?
Thanks in advance.

Windows 8.1 - T530 - Base Device Driver missing!

Hi guys,
Been working to solve this base device driver missing in my T530 image since couple of hours now. I've searched a lot and seen many threads talking about this problem. Tried every solution I ran into but nothing worked so far.
PCI\VEN_1180&DEV_E822
Form what I know, this should be a Ricoh Media Card Reader driver. I think I tried like 10 drivers from Windows 7, Windows 8, Windows 8.1, 32 bits and 64 bits and nothing worked so far. Tried Smart Card reader driver too.
All Windows Update are installed at the moment.
Any clue to help me?
Best regards
Solved!
Go to Solution.

I don't know what is the Have Disk...!
Yesterday... we managed to install the driver using the Ricoh Media Card Reader Driver for Windows 8.1 (32-bit, 64-bit) 25 mars 2014. I could swear I had tried them all... So I took the extracted files and added them to the imaging thingy and it doesn't work anymore!
I did Windows Update on the T530. I did try to manually and auto install using the same driver but it won't work anymore
Any clue?

Drives missing when using Link Media

Premiere CC 2014 is not seeing two of my RAID drives when I try to Link Media that went offline. It's a new menu box now, and I can't find any way to make it see two of my RAID drives.
But Premiere CC 2014 can totally see those drives, because I'm editing with other media on them. And I can see those drives in Import.
Import menu box is on the left. Link Media is on the right. Drives missing.
Any thoughts? Is this a bug? I've already done a bunch of editing and need to be able to Relink 197 clips, not Import them and start over...
Mac OS 10.7.5
Oh, and in Premiere CC, the Link Media menu is the same as the import menu, so this is new to 2014...
--jon--

Thanks, Jeff. Have rebooted multiple times. The two drives are both hardware RAID 5.
I can Import from these drives as well as edit from them. But when I use Link Media (after having moved media to a new folder in one of the drives), Premiere doesn't see the drives when I use Locate. If I use Replace Footage, I can indeed see the two drives and replace each clip one by one.
I also have two external RAID 0 drives that Premiere CAN see when I use Link Media. But it can't see the two RAID 5 drives when try to locate offline media with Link Media.
--jon--

Continual reboot and device driver missing

Hi, I have a t400 installed with both win7 and ubuntu 11.04. The system suffers from continual reboot, basically when I shutdown the machine, it automatically and forcibly get rebooted.
I have followed some instructions on the web, and there is a device driver missing, which is PCI simple communication controller. I have tried download AMT package, which does not work for me. It gets stucked in a terminal saying that I need insert TN33, which I dont have. My t400 type is 7417. Any comments are appreciated.

hey tristartom,
continuous reboot occured after installing ubuntu yes ? could you remove ubuntu and have your unit on a mono-boot with windows and see if the same error occurs.
if it doesn't happen, then i suggest heading to Ubuntu forums or the Linux thread in this forum and check with other linux users if they have experience this same issue as you.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Probook 6570b - Are the CPU & GPU upgradeable?

Hi, I bought a refurbished Probook 6570b running Windows 7 Professional 32-bit. It seems it doesn't come with the core cpu but rather a celeron B840 1.9GHz. Nor has it a discrete Graphics unit.
My question is this. Are the CPU & GPU upgradeable?
Thanks for taking time to read this!
This question was solved.
View Solution.

Thank you!

Temperature and fan Probook 6570b on battery power.

Hi
I'm new to this forum, so please excuse me if I'm not complete with my first post.
Last week monday I bought a HP Probook 6570b at my college PXL (Belgium, Limburg, Hasselt), but it was running under Windows 8 Pro 64bit. I didn't like this OS so I went and bought a Windows 7 Professional 64bit on friday. So I've used Windows 8 for about a week, and since saturday I'm running Windows 7. Now I've noticed the temperature is reaching up to 60°C when I'm only working on Word, Outlook or Firefox for example..
A friend of mine in class has een HP Envy, bought after I got my HP Probook last week, so new as well (15", i7, Windows 8 64bit, 16GB RAM, 2GB Nvidia GPU,...) and his laptop is only reaching around 40°C-48°C, running the same programs.
Now I'm wondering if it's normal that my Probook is getting much warmer?
Things I noticed:
-Could it be that running Windows 8 is less power consuming than Windows 7? (and thereby askes less of the CPU and produces less heat because of that)
-I found that while running Windows 8 in the beginning the fan didn't run that much and so often as now on Windows 7 (I had the same kind of programs running and installed on the laptop), but that could also be my imagination. I didn't look at temperatures while Windows 8 was on it.
Things I did while swapping OS':
-Formatted the SSD completely, installed Windows 7, installed all the drivers for my model from the HP site.
-I also did a BIOS update, could it be because of this? (maybe the temp the fan has to start running changed in the new BIOS?)
Things in my mind to solve this if you can't help me:
-Tried to find some info on undervolting the CPU, but from the readings and sites I visited I'm guessing the modern CPU's do that themselves, and it isn't possible..
-Place some extra little heatsinks on the cupper rail for some extra cooling. Or is this a bad idea?
-Replace the standard cooling paste with some new cooling paste with a """"high performance"""" (as they call it) brand, maybe that could cut some degrees..
So the main point is that the temperature is getting pretty high in my opinion, and that the frequenty the fan starts has shortened (when I just got it, almost never turned on....... now with Windows 7 much frequentlier). So if anybody experienced this as well, and/or has a solution, please tell me!
Thank you!
Specs:
HP Probook 6570b
Windows 7 Professional
Intel i5 3230m
AMD Radeon HD 7570M 1GB GDDR5
Scandisk X100 128GB SSD SATA-III
8GB DDR3 1600Mhz

Hi Skip000,
I understand you are having issue with the laptop possible overheating. If you follow this document on Overheating it will give you some helpful information.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01657439
Hope it helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Usb disk pro driver missing

Where can I find and install the driver for my usb ports? there is a error message that says driver not installed code 28.
thanks in advance
vershawnda

Which computer do you have? There is a label on the bottom.
usb disk pro driver missing
What's this about a disk?
-Jerry

Ethernet driver missing on s5-100z Pavilion Slimline with Win7 Ultimate

Hi all, I have installed Windows 7 Ultimate SP1 on my daughters computer and all works fine except that when I try to connect to the router is says the Ethernet driver is missing. When I check the Device Manager it shoes the Ethernet Controller driver is missing. I have tried everyway I know to find the driver, but, so far nothing.I have worked with many computers over the years and have been a Tech Beta Tester with MS for over 15 years and I have never ever encountered this kind of issue before. I have the same Windows OS installed on my HP Pavilion Slimline s5-1205z and did not have the problem. I have changed out the ethernet cables 4 times thinking it might be the cable, but, so far nothing resolves the issue. I am in hopes that someone here can help me find the driver for the s5-1000z so that we can get my daughter's computer connected to the router. Any suggestion or assistance will be very greatly appreciated. She needs the computer up and working with the Internet before schools starts so she can do her online courses. Thank you. :-)

Hi: The motherboard specs for that model indicates that it has the onboard Realtek Technology: RTL8105E-VC ethernet chip. The second driver on the list at the link below should work. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false

Probook 6570b driver missing HPQ6000 W7 64b Ultimate

Similar Messages

Maybe you are looking for