ProBox23 - no video, no audio, no bios

Hi, today i received a ProBox23 with an i3-4130T CPU; 2x4gb Corsair (CMSO8GX3M2C1600C11) DDR3L 1600MHZ 1,35V; an 60GB Kingston SSD - I put all together and wanted to boot it. First nothing happened, after a second try it started, the cpu fan turned and a a blue led was on. But i got no signal to the monitor, i heard no bios beep and nothing happened. I opened it up, checked twice if RAM, CPU and SSD are plugged in correctly, but it didn't change anything. Have you guys an idea what went wrong?

Thanks for your answer! I just tried
one RAM and without SSD: ok!
one RAM at RAM slot "A" and SSD: ok!
one RAM at RAM slot "B" and SSD: bad
So it seems to me that RAM slot "B" is defect. Shall i contact the MSI support to change the proBox or is this maybe a kind of Bios related topic?

Similar Messages

Video and audio skipping in PowerDVD 8

Hi,
I have an issue when I try to play DVD's in PowerDVD 8. Exactly every 5 seconds the video and audio skip, or jump/become choppy and I cannot watch a movie. I have been researching and trying to figure out what is happening but have no idea. Could it be the X-fi I have installed the latest beta drivers to no avail.
Anybody have this problem or have any ideas on how to fix it's I have updated all drivers/firmware for everything and still can't make it go, sigh.
I have the following specs:
Intel x38BT mobo
X-Fi Fatalitly champ.
4GB DDR3 RAM
9800 GTX
ASUS 8x dvd-rom
E8500 CPU
Win Vista 32-bit
Thanks

Try this utility:
http://www.thesycon.de/eng/latency_check.shtml
and post results.
Gigabyte Boards at least with x48 chipset have an audio latency bug that is only fixed via a beta bios update. I have no idea if this also might affect your board...

Flash Player 9 video yes audio no

My Flash Player 9 worked well before, now I don't have audio
when playing i.e. YouTube, etc. Did reinstall and all the same
again. No audio. All other stuff WMP11, Real Player, Quick Time are
working fine video and audio. Anyone knows what could it be causing
this problem ???

Hello roperone !
Thank you for your assistance but it didn't worked for me.
Below is description of my machine:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Name VIVAN1
System Manufacturer Hewlett-Packard
System Model HP Compaq nc6320
System Type X86-based PC
Processor x86 Family 6 Model 14 Stepping 8 GenuineIntel ~1828
Mhz
Processor x86 Family 6 Model 14 Stepping 8 GenuineIntel ~1828
Mhz
BIOS Version/Date Hewlett-Packard 68YDU Ver. F.0B, 12/15/2006
SMBIOS Version 2.4
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2765
(xpsp.050928-1517)"
Total Physical Memory 1,024.00 MB
Available Physical Memory 115.53 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 2.39 GB
Page File C:\pagefile.sys
Name SoundMAX Integrated Digital HD Audio
Manufacturer Analog Devices
Status OK
PNP Device ID
HDAUDIO\FUNC_01&VEN_11D4&DEV_1981&SUBSYS_103C30AA&REV_1002\4&2A4C52EC&0&0001
Driver c:\windows\system32\drivers\adihdaud.sys (5.10.01.4321
built by: WinDDK, 172.00 KB (176,128 bytes), 2/28/2006 14:36)
Name USB Audio Device
Manufacturer (Generic USB Audio)
Status OK
PNP Device ID
USB\VID_062A&PID_9004&MI_00\6&1D2D687&0&0000
Driver c:\windows\system32\drivers\usbaudio.sys
(5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 57.88 KB (59,264 bytes),
1/9/2007 18:45)
Name Bluetooth Audio
Manufacturer WIDCOMM
Status OK
PNP Device ID
{95C7A0A0-3094-11D7-A202-00508B9D7D5A}\BTAUDIO\1&30EE4AD&0&1000000030000
Driver c:\windows\system32\drivers\btaudio.sys (4.0.1.3300,
392.25 KB (401,664 bytes), 1/18/2006 19:09)
Name Bluetooth High Quality Audio
Manufacturer WIDCOMM
Status OK
PNP Device ID
{95C7A0A0-3094-11D7-A202-00508B9D7D5A}\BTWAUDIO\1&30EE4AD&0&1000000030001
Driver c:\windows\system32\drivers\btaudio.sys (4.0.1.3300,
392.25 KB (401,664 bytes), 1/18/2006 19:09)
Also, I have WMP, Real Player and Quick Time installed and
Flash Player 9 as well. Well, your post helped me and gave me an
idea where to look in my machine for the problem and I discovered
these facts:
1. My speakers are working fine
2. My mic's are working fine
3. My sound card and driver works fine SoundMAX HD Audio
4. All my players work fine except audio when playing FP9
5. My windows sound recorder does not work at all
6. I cannot play MIDI files by default Microsoft Synth and I
have to use Quick Time to play it.
7. I cannot play my default ( and other themes ) system
sounds
8. Also, I can see Microsoft GS wavetable SW Synth when
setting Audio Properties but after apply it disappears again.
9. My all drivers are updated and machine as well.
So, I did realize that problem is in default Microsoft
Windows MIDI Synth like you also found it but after spending hours
on the forums and use nets I couldn't find any solution to work
around this problem except to reinstall my windows. I also can
confirm that this problem have nothing to do with different codec
installed like AC3, ffdshow etc.
Furthermore, there is no any help on HP Support site for this
kind of problem.
SO, IF I WOULDN'T BE ABLE TO FIND WORKAROUND SOLUTION I WILL
BE FORCED TO REINSTALL MY WINDOWS AND HAVE AT LEAST 8 HOURS OF
"FUN" TO SET UP ALL THE STUFF I HAVE NOW ON MY COMPUTER !!!
SOMETIMES I REALLY DO HATE WINDOWS AND THINKING TO SWITCH FOR A
LINUX !!!

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Webcam Live - Unable to capture Video when "audio" is on

Unable to capture Video when "audio" is checked.
Error message "Unable to capture Video - check settings for video compressor and Audio compressor". What are these ??
I have Plantronics headset and have tried most "8bit, mono settings"
Capture Video works when audio is not checked.
Am at latest s/w and driver patch levels.
HELP !!!

Addl info
1) When using Skype, Camera and Mic work fine.
2) When I get error - the camera view on my screen balcks out

Sony DCR-DVD505 Handycam: Unable to get video clips, audio

Evaluating Adobe Premier. Hopefully helpful for other Sony DCR-DVD505 users.
Objectives:
1) Get videos from Sony DCR-DVD505 handycam into Premier Elements
2) Drag and drop various clips into Sceneline
3) Insert menu markers
4) Burn DVD
Stuck in Step 1, getting video from handycam, unable to get video clips (with audio)
First Try: NO AUDIO.
The Sony DCR-DVD505 burns a mini-DVD (1.4 GB) while recording. After "finalizing" the disk, the media may be imported into the computer. Streaming was supported by Windows XP driver but is no longer supported in Windows Vista. In fact, Vista Service Pack 2 (SP2) does not even recognize the camera as a DVD drive! So downgraded to Vista SP1 and used the Sony Picture Motion Browser to import media into computer as MPG files. Each MPG file is a clip (corresponding exactly to camera record on-off sequence while shooting). Then opened up Adobe Premier Elements 8. Used get media to import all the MPG clips into "Organize". Dragged and dropped various clips...inserted a menu or two and...burned the DVD. PROBLEM: VIDEO OK, BUT NO AUDIO(?!). The MPG files on computer play fine (with audio) inside Windows Media Players. Read all sorts of nonsense about why Adobe Premier (probably old versions) cannot work with "low-quality/compressed" MPG and needs to be a particular type AVI soo....
Second Try: Capture VOB directly
Forget the camera. Insert the mini-DVD directly into computer DVD drive, create a new project and followed directions from "Lowdown on VOB" http://forums.adobe.com/message/2117743 and "tools to convert to DVI" http://forums.adobe.com/thread/415317. I loaded the VOB directly and dropped them into Timeline as advised by the second post (only hitch being the first VOB pertaining to the DVD menu is not recognized and is neither needed).
However, File > Export is always GREYED out (unusable). And the status at bottom right seems to be looping on "Background Rendering". DO I WAIT? In any case, the whole video is showing up as a single continuous stream and what I want are the clips from the camera?!
Then I tried Prism (again as per the second forum post mentioned above). It simply did something to process 30 minutes of video and crashed in the end without explanation - saying there was an error in conversion.
Is this AVI conversion even a good idea? How would I get my clips back??
Bottomline. My mini-DVD and imported MPGs plays fine in Windows Media Player. However unable to extract the camera clips (with audio).

Dawg, I have the Sony DCR-DVD305, and have been using it successfully for quite a while with PE7, with few issues, once I had a workflow nailed down.
I believe the 505 is basically the same camera, with some additional features.
This workflow worked for me in the past so I'll pass that along:
Sony Browser to PC as Mpeg.
Mpeg to Windows Movie Maker, output to DV-AVI, taking default settings.
DV-AVI imported into PE7.
This should also work for PE8.
Upon getting Cyberlinks PowerDirector v7, my new workflow changed to this:
I take the min-DVD directly from camcorder to my PC, and capture the disk via Power Director.
PD will convert the VOB's directly to DV-AVI Type 2 on one pass.
I then load this DV-AVI into PE7.
(PD v7 was pre-installed on my new PC from HP, or it can be purchased from Cyberlink).
Other options to try:
Copy the VOB's directly from the mini-DVD to your PC and use Prism to convert these to AVI.
Or load the VOB or Mpeg into PE, then use that to convert to AVI.
(Export to DV-AVI with PE8 is done with SHARE/PC, not Export under the File Menu, which is greyed out).
I've had many issues trying to work with Mpeg's and VOB's when loaded directly to PE with limited success.
So if you can get it converted successfully to AVI outside of PE, I've found this to be a better approach.
Post results, if any of this works for you...
Note: One other thing, if you are working directly with VOB's to PE, especially multiple VOB's from a single DVD, you can encounter out-of-sync issues between video and audio. If this occurs, review this link from Muvipix:
http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469:

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

Live broadcast feed on byu.tv does not work--I signed in, but there is no video nor audio feed.

During all five Sundays during last month, January of 2011, the live broadcast feed, during the live broadcast of the Mormon Tabernacle Choir's weekly program of "Music and the Spoken Word" from 9:30 a.m. to 10:00 a.m., Mountain Standard Time--both streaming video and audio--after my signing in to byu.tv's live broadcast site, worked. Starting the first Sunday of February, 2011, which was February 7th, however, and SINCE then, I have not been able to get their live broadcast feed to work, nor at the time of the Tabernacle Choir's live weekly broadcast, nor at any other time.

Try to clear the Flash cookies and settings.
Flash Website Storage Settings panel:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
See also Flash Local storage settings:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

New to iMovie, create live video and audio?

Hello, I am trying to create a video of a live musical performance to post on youtube and have figured out how to use the isight to get a video but can I use the biult in mics to record live audio with the video?

Hello, Nateomite
As Karsten says, you will certainly get better results and much more convenience with a camcorder.
However, if you decide to use your MacBook, the built-in mic can record audio with your video:
in iChat: iChat > Video > Record Chat records both video and audio.
in iMovie: http://docs.info.apple.com/article.html?path=iMovie/7.0/en/10172.html
tells you how to record using your MacBook's built-in iSight (and mic.)
Other movie/video recording apps may work differently, but most allow sound with video.
EZ Jim
Message was edited by: EZ Jim for other apps
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

DVI to Video Adapter- Audio Compatibile?

Hey I have two questions about the DVI to Video Adapter.
I want to use it to connect my MacBook Pro to a TV in order to watch DVDs. Now my question is does this wire only transfer video, or does it also transfer audio. Will it get the movie on the screen but the audio will still be coming from the computer?
If so, is there a wire i can purchase that will transfer both video and audio through rca component wires, or is there only an hd wire compatibility with this computer?
Thanks. I was in the process of checking out and stopped to think about that. The sooner someone can ansnwer the better. Thanks.

The wire will only carry video. That being said, you can buy a mini-jack-to-RCA cable for about 5 bucks at Walmart, Target, Meijer, Best Buy, etc. Plug that into your MBP's headphone jack and the back of your TV, and you're good to go.
I did this for years with both and iBook and a PowerBook, and would still be doing it, but for finding a DVI-to-HDMI cable on clearance last night. I still do the same thing for Audio though. This is the cable I use for audio.

No video or audio to HDTV

I have the 2007 13-inch white MacBook. I'm trying to connect it to my Sony Bravia HDTV which has two combined HDMI / audio inputs, one HDMI-only input and one audio-only (RCA jacks) input.
I bought an Apple Mini-DVI to DVI adapter, an HDMI-DVI video cable and a stereo cable (mini-plug to RCA plugs) at an Apple store to connect my MacBook to my HDTV. After connecting to the HDMI and audio jacks on either combined inout, I get a blank screen and no audio. Are there any settings I need to adjust on my MacBook? Is there anything else I need to do?
When I plug the audio cable into the audio-only input on my TV, I get sound from the MacBook. When I plug the HDMI-DVI cable into the video-only HDMI input, I get the desktop but no dock, no icons, nothing but the background screen of my desktop.
When I connect to either of my other two HDMI/audio inputs (video and audio on the same input) I get just the totally black screen and no audio.
Thanks for your help.

After connecting to the HDMI and audio jacks on either combined inout, I get a blank screen and no audio.
Generally there will be a setting on the TV to tell it whether to be looking for digital audio on the HDMI port or analog audio on the associated RCA-type audio inputs. But there should be a screen regardless, so I don't know why it's blank.
When I plug the HDMI-DVI cable into the video-only HDMI input, I get the desktop but no dock, no icons, nothing but the background screen of my desktop.
This is normal. It means the Mac is running in extended desktop mode and the TV is acting as an extension to the MB's built-in screen. If you go in Displays Preferences, you should see an Arrangement tab. Under that tab you will see two blue rectangles that are meant to represent the two screens. The smaller one associated with the MB will have a white stripe across the top meant to represent the menu bar. If you drag that white stripe from the smaller rectangle to the larger one, the real menu bar will then move to the TV and the MB will now be an extension to the TV as the main desktop.
An external screen can be run in a multitude of ways. One way would be to have the MacBook's lid closed and only the external screen running. Another way to run is with the lid up. In that case there are still two modes that can be considered. One is called mirror mode. Mirroring means the same thing is displayed on both the MB's built-in screen and the external screen. But the two screens can also be run independently. This is called extended desktop mode, and it sounds like that's the mode your set up is in now. Here are some links to Apple article that explains more about this.
http://support.apple.com/kb/HT3146
http://support.apple.com/kb/HT3131

With newer MacBook Air, sending both video and audio to an LG TV works fine, but I want to send the audio to a sound bar attached to the TV. Any way to do this?

I am trying to get audio to play through the soundbar attached to the TV for great sound. Works fine with Apple TV, but on the MacBook Air, system preferences will only find the TV speakers. If I change the settings on the TV to external speakers (the soundbar), then I get no sound at all. The HDMI connection does what it is supposed to do, providing video and audio, but the audio can only go to the TV. I don't know if you can go backward and send only video through HDMI and then connect to the soundbar through the mini jack ports on the computer and the soundbar. Any solutions will be appreciated.

its important to do this in the correct order so the camera will be senced by the Mac and to prevent the Firewire connection from electrical damage:
power down your Mac
connect firewire from camera to Mac
power on camera and insert tape in camera and play back
power up Mac
start QuickTime
File > Preferences > record tab
video source - select the camera you have
sound source - select the camera you have
quality - select device native
the video should show in the QuicTime window
a green line below video will show presence of sound-it will play through the speakers if they are selected in system prefernces
rewind tape and playback
click on red button to start recording

Video and audio transmission from MacBook to TV

Since I really get mixed up with various posts about connecting MacBooks to a TV set I would love to get simple answers to the following questions:
How can I connect my MacBook to a TV so that I have video and audio rendering? My MacBook has a mini-DVi output, my TV set has VGA, HDMI, and audio inputs. Since to my knowledge HDI carries no audio signals I suspect that I need an extra audio connection. Is this true?

to rapanuii
depending on your macbook model you may need a "converter", meritline.com/mini-hdmi-to-cvbs-converter-adapter---p-83103.aspx?source=fghdac& gclid=CO7J9NSU67QCFWGnPAodRBsAAw similar to this. Use a mini DVI to HDMI apple adaptor. if you have RGB connectors on your tv you want http://www.monoprice.com/products/product.asp?seq=1&format=2&p_id=8125&CAWELAID= 1329456201&cagpspn=pla&gclid=CKW25beg67QCFaGPPAodRHAAfg

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

ProBox23 - no video, no audio, no bios

Similar Messages

Maybe you are looking for