Probs with imported swf file

Hi
I have imported a swf file which is displayed correctly
within the import dialog. After clicking OK only the placeholder of
the imported animation is seen. When running the captivate movie
the swf is not diplayed. When setting the swf to synchronize to
movie all frames of the swf are displayed but don't stop where they
are supposed to do. Unfortunately this swf file was exported from
the authoring system opus xe so I don't have a chance to edit it in
flash itself.
Maybe someone knows a solution for this prob?
T.

It sounds like the swf file may not be 30 frames per second.
I'm using v1.01 and I've had a lot of problems with swf files
loading consistently. A few times when I positioned the swf file at
the very beginning of the Captivate timeline it wouldn't load.
Moving it a half second up on the timeline fixed the
problem.

Similar Messages

Problem with import SWF file

I am trying to import a SWF file that i have exported from indesign CS5, as i want to create a pdf that has interactive page curl and page turn.
But whenever i reimport the file it is really low resolution.

I agree with Steve, you really should think is it absolutely necessery to try to place your SWF into PDF... you probably will face some problems if you do that.
If you really must, you have to understand some basic rules about working with palced SWF (and videos too) in InDesign.
The pixelated image you see above is not actual SWF. It´s an element called poster. When you place a SWF or video to your layout in InDesign, you may choose a poster for it. It´s kind of placeholder for actual SWF or video and will be shown when actual content is not playing. InDesign uses poster also as an appearance for your SWF/video file while you are working with your layout. InDesign can´t show actual SWF/video content in working area.
You have few options how to define your poster. The most popular one is to grab it from SWF or video file. You can choose any frame to be used as a poster. Except that poster is not that frame itself, it´s a "screenshot" of that frame. Which means of course a risk that it may be pixelated at some point. Resolution you will define in Export SWF window´s Advanced tab effects to posters too. So be careful with lower resolutions if you want to avoid pixelation.
Another, and IMO more professional method is to use good quality image as a poster. You can prepare your poster image in any regular image editing software.

Error while importing swf file in to Crystal Xcelsius Designer 4.5

help me...., Error while importing swf file in to Crystal Xcelsius Designer 4.5

I read in the book called "CRYSTAL XCELSIUS for DUMMIES" on page 243 under topic called Nesting a Dashboard within another Dashboard.
sorry i used the wrong word embed, here i am importing the swf using image component.
My requirement is somethis like this parent child dependency menu.
eg: i have to two tabs 1)alphabets 2) Numerics First levet menu
if you click alphabets tab then the following menu A/B/C/D/..... Z i have diff charts.. under each alphabet.
If you click numberic tab then the follwing menu should one/two/three/.......ten here also i have diff charts under number
in over to avoid complexity in dynamic visibility i divided the into 3 dashboards. 1- alphabets 2- number and 3 -importing both swfs.. everything works fine except first tab and last tab under alphabets and numerics.
If some one help me with some alernative ... would be great.
Thanks

Import swf files in CP3, but export without any voice?

Did anyone have the same problem with me?
I imported swf file in slide and published. But I can't hear any voice in the slide....
At the same time, I tried to import as flv file and published, then it works. Voice in slide can be heard with no problem.
How can I fix the problem? thanks!!

Hi,
Just a quick check. Go to menu item " Edit > Preferences" and select category "Publish Settings".
Confirm that option "Include Audio" is checked.
regards,
Mukul

Actions not working to imported swf files in Flash Catalyst

Hi,
I have a problem with manipulating my imported swf files (created in Flash professional) in Flash Catalyst CS5. Whenever I add any of the swf control actions to a swf file in the timeline such as 'stop', the animation ignores it and keeps replaying. I tried to add action sequence when a certain button is pressed, and also tried to create 'On application Start' and added 'stop' so that the animation stops immediately when the application opens. No matter what I do, the animation refuses to perform the actions and simply replays. The animation is a simple shape tween between 2 states with no action script attached to it. I published the animation as an swf and exported it to Flash Catalyst. Is there any suggestions whatsoever on why this is happening? Is it something to do with setting up my flash file prior to import? The only way I figured out to stop the animation from playing is adding action script to the flash file in Flash Professional however this is not what I want because I would like the animation to be controlled by components in my flash Catalyst document.
Thanks

You can make you swf a custom component with 2 states.
The first state will be empty and rename it "OFF" the second state will have your swf file and name it ON.
Then go back to your artboard/project, add your 2 buttons ON & OFF.
For the ON button add interaction "play transition to custom component ON"
For the OFF button add interaction "play transition to custom component OFF"
Here is an example swf_control

Can Adobe Interactive PDFs play sound from imported .swf files

Hello.
I'm really really stuck, can anyone help? I'm on 10.8.3 using In Design CS6
I am trying to get an interactive PDF with imported .sfw files with sound to play ....the sound. Preview is fine in the working file - but as per the previous query on thishttp://forums.adobe.com/message/4772574 - The interactive PDF loses the sound. I tried installing ezPDF - but it's an app and I don't know how to install it to work (I think it's meant for iPADs). So...does anyone know if I can have an imported .swf file play when exported to an Interactive PDF and also work on an end users PC?...should I be able to install ezPDF reader on my MAC and get everything working?
Any help would be good as this is day 3 having called Adobe on Day 1 which was fruitless.
Thanks
Ads

Really hard to say without seeing the whole project, but my guess is that you have moved your exported SWF somewhere from it´s original location (where you exported it to) without moving Resources folder to same target location too... when you place video, audio or SWF to your layout, indesign does not embedd it to resulting SWF. Those files will be stored into a resources folder which always has to be at same root with exported SWF. Media files will be loaded dynamically from that folder at runtime.
So you can guess what happens if that folder does not exist....

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Creating IPA file with Multiple SWF files using ADT

Iam successfully able to create ipa files using the ADT package but my next requirement is to create an IPA file with multiple swf files.I think it might be easy if your SWF files are regular the tough part is my swf file has lot of action script in it so the only option is to through the command prompt and using the ADT package of Adobe AIR.So now i have 10 SWF files like this and iam creating ipa file for each swf seperatly but now I want to put all of the swf files into one ipa file.Please let me know if i was not clear in my description

I think you are trying to explain how to load two swf's one with action
script and loading an other swf file which should be non action script.If
you read my requirement carefully.I have all the same type of swf's and
these swf are automatically created as a form of output for xcelsius dash
board software.Iam capable of creating individialu ipa files from these swf
files.So when I try to combine the same kind of swf files the first error
its giving is the file name which I have used in the xml.in the main file
name for the swf file its not considering the two swf file name in the
initial window.so the adt package in the command line is not understanding
the file name from the xml and the command prompt and giving error this swf
file does not exist.So please consider how to combine two swf files with AS3
into one ipa file.These swf files are not editable,Let me know if you find
any idea to achieve this

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Webpage with a swf file reloads on safari on every visit

can anyone explain why a webpage with a swf file reloads on safari on every visit? it's a 1.2 MB swf file - it takes about 5-10 seconds to load but apparently doesn't get stored in the browser's cache. when you go to another page and back to the original page it loads again. (in internet explorer, once the file has loaded it is stored in the cache and doesn't repeat the loading process)

Yes, similar to your experience, Safari reloads the page on my system too, i.e. does not write it to cache. So when I backspace, the page reloads. Same, if I enter the site on a new tab after an initial load on another tab. By contrast, Firefox, on the backspace or new tab, displays the page immediately without the reload being necessary. Very nice site by the way. Very effective use of Flash content. Is it your web design?
You may find it helpful to send feedback to Apple. Perhaps, they'll change the caching, or perhaps offer it as an option, in Safari's next version due to make its debut with OS X Leopard in early 2007 (I'm an optimist - ).
Let me know if you need any further help on this end. Aloha from Big Island.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.8) LaCie 160gb d2 HD Canon i960 printer

After effects cs6 will not import swf files...

after effects cs6 will not import swf files...keeps saying it's unsupported. why would this be? what do i need to change?

What SWF file? What source? How was it generated? SWF generated by Flex/ Flash Server may contain constructs that are incompatible and SWFs that render all their elements dynamically using Flash drawing primitives and use lots of ActionScript may also not work...
Mylenium

Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Urgent please
anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Sounds like the folder Write permissions issue described here with a solution:
"Some import operations were not performed" from camera import

Import swf file with drag & drop action

Hello!
I created a flash animation with drag & drop.
I imported the swf into Captivate 3, but when I publish the
project, the animation don't work.
Can you suggest me some workaround to understand the problem?
Best regards

Hi kpurple and welcome to our community
When you published the project, did you ensure to copy all
the associated files? Normally the added .SWF files exist as
external files that need to exist in the same folder as your
Captivate files.
Cheers... Rick

Importing swf file with skin and closed captioning problems

I created a flv file in Preimere and I pulled it into flash to create close captioning. When I publish it, it creates a swf file that I can open up on its own and it has the skin with the button to push to show the closed caption. When I try to bring that file into captivate, it doesnt bring in the skin and it just automatically shows the captions. How do I get it to bring the skin in with it?

Are you seeing this problem when you preview you project. or only after you publish it? If it is when you publish, is it in both the local version and/or in the web version?
Also, which version of Flash Catalyst? 1.0 or 5.5.?
Chris

Probs with imported swf file

Similar Messages

Maybe you are looking for