Probs with k8t neo and radeon 9500 non pro

Hi!
I´m totaly new with amd and i got a msi k8t neo and a sempron 2800+ with 1gb memory and a saphire radeon 9500 non pro and the computer does not start with that graphiccard.The processor fan just spins up a bit then it dies. But with a gforce 5200 card the computer works fine. I have tryed the saphire card in my server with a P4 1,6ghz and on that motherboard it works just fine.
Im from sweden so my english is not the best ;-)

Quote from: qTj on 17-November-05, 20:25:05
Yes i have tryed all those things. But my card works perfectly in 2 diffrent computers. So i dont think that the vidccard is broken.. But what do i know...
Well you know that othergfx cards do work oin ur board, so I still say you RMA it, or swap if with another card that will work
Quote
"drulleförsäkringen"
translates like "fools insurance", apperently in Sweden U get a refund when u buy something and wreck it

Similar Messages

MSI K7T266PRO2-RU and Radeon 9700 (non-pro)

Hi!
I'm thinking of upgrading to a Radeon 9700 non-pro,
and just thought I'd check this forum to see
if there are any compatibility issues between
my K7T266PRO2-RU and Radeon 9700 (like
there were between GF4mx).
If someone has a similar setup (k7t266pro2 w. 9700PRO/non-pro)
I would like to hear of your experience with this.
I appreciate your help.

Hi,
I can't remember any problems with it, as long as you make sure the powersupply can handle it.

K8T Neo and AGP ATI 9700 Pro...Video Problems!

This computer has been out of service for almost 6 months as I have replaced it with a new one. I grabed it today and loaded XP Pro on it without any problems. I have 2 monitors attached to the ATI 9700 Pro both running at 1600x1200. After configuring the new OS with updates and drivers I rebooted. This is where the problem surfaced.
PROBLEM:
I get to the XP PRO Loading screen with the progress bar. After a few seconds, 2 revolutions from the progress bar, the screens go black and a few seconds after that the monitors go into standby due to the lack of a video signal.
MORE INFO:
Several times when I tried to reboot, the PC would not display video at all and beep (the video error), 7 times (I think). Now this problem is not happening. Although I did get random characters all over the screen once.
I can boot into Safe Mode without any problems.
480w Thermaltake PSU
THEORIES:
The AGP slot is having problems changing the resolution from default to 1600x1200 for the monitors.
NOTE:
This computer has always had problems, 99% of which were playing video games. The problems I experienced in video games were that the computer would lock-up or automatically reboot after random time intervals when playing games. The games I noticed it having the most problems with were Everquest II and World of Warcraft. I replaced this machine with a Dell and have had no problems with either application. Therefore I can rule out faulty software. At the time before replacing this machine I tested everything, Memory, Hard Drives, etc...

AMD 64 (Don't Remember the Speed)
MSI KT8 Neo
2x512 MB PC????
Built-By-ATI 9700 Pro 128MB
1x200GB WD SATA
LiteOn DVD-ROM
Yamaha CD/RW
Realtek AC97 Onboard Audio w/ Cheap Dell Speakers
Some Realtek NIC (PCI)
Enermax Case wit ALOT of noisey fans (I hate noise)
Some dumb case light kit too.
Thermaltake 480W SilentPower
Windows XP SP2 (Installed a few days ago and still not working)
Click here for the PSU specs

Problem with K8T Neo and cdrom

Hi!
I have got a problem with my cdburner (LG). When i put in a new hdd in my computer the cd stoped workin. I have a seagate 200gig sata and with that it worked fine. And when i put in a WD 250gig sata disk to the computer the cd burner stoped working. But both the discs works fine. So What could help? The PSU should be enough. It´s a qtecnology 400w (NOT a Qtec). And i have used it on a more powerdemanding system.

Make sure that the Opticals and the HDD's do not share an ISE Channel. Typically both HDD would be on IDE0 and any Opticals would thenm be on IDE1. Also check that your jumpers for Master/Slave/Cable Select are set correctly for all drives. As you just added a driver you may have to remove the opticals drivers and reinstall them so that any positional changes are compensated for properly in your registry.

K7N2 AND radeon 9500 : NO post!!

Hallo @ all!
I have a big problem.
i read some similar issues all over the forum with the K7n2 and radeon 9500/9700 and Kingston RAM.
Well, i have 2x 256 MB 333 cl 2.5 kingston ram.
when i use the radeon 9500 non pro 128 MB, the fan just moves a short time and the system is off and can only be put on after PSU switched off.
So I cant switch on my SYSTEM ! (
PSU enermax 365 (3.3V 32A 5V 32A )
the graphics card works, tested on ECS K7S5a AND MSI KT400!
with SAME PSU.
AGP is OK tested with GF 2 mx.
but not the combination 9500 AND K7N2.
im so sad!
i have to run the syst with a VODDO BANSHEE :-(
the system is ok, if i remove the 4 pol aux power plug from the graphics card, BUT: then the graph card hinders system from booting. (intentionally , its made by sapphire)
If sombody has a solution or a tipp PLZ PLZ PLZ help.
Greetings, JENS.

Hello!
I found a "solution". although u cant call it so... .
Well, 1st i tried an enermax 465 watts, but of course, the problem is the same.
the fans just moves 1 sec and then u cant do another till u switch PSU off/on.
its no RAM problem, because system ran fine with voodoo banshee PCI.
so i tried sth. "brave" :-D .
but what should happen bad, if the Graphics card is layed out for the 12V ???
I removed the 12v Power plug, booted the system till the Warning: plug in 12V aux power in ur radeon 9700....
(i posted before, that system starts till this point when power plug (12V) is removed).
And then I plugged in and hit the RESET button:
See, system booted well *sheesh*.
But, its no solution due to its necessary any start....
So, would U built in a delayed switch, which overtakes this work, or would u send in the Mainboard?
Greetings, Jens.
What a curies thing a PC is...

Booting "issues" with K8T Neo-FIS2R

Well hello everyone. First of all I want to say that my English isn't completely error-free and my problem might seem awkward because of my ways of expression.
I also want to say that i've read alot of threads and searched the forum for my problem.
For a couple of days ago I got all my parts for building my 64bit-system and I build her up. To my suprise it booted, with almost no errors. Although I could install Windows XP and use it completely, everytime I boot it (under the booting sequence) it says "Bios is not installed", although I can enter bios simply (like everyone else) just pushing the DEL-button.
But this isn't the only problem. When I enter PC Health Status it says that the cpu is running at whooping 62-65 degrees. When i have my hand around the cpu-cooler it doesn't even feel warm so I think it has something to do with my BIOS-version that i am running now (Yes, I've read that in much more threads)
Also I have problems using the Cool'n'Quiet technology. I have it supported in the BIOS and activated it although it will not work (maybe it has something to do with the bios?) With this i mean that i will not go underclocked (It's allways 2.2 GHz)
My final problem is that it sometimes takes the system 2 minutes to boot sometimes, it happend after i flashed the bios to 1.7 from 1.0
Under these circumstances I've used 1.0 AND 1.7 BIOS-versions.
I've never overclocked the computer either.
What could be wrong?
I'm using 3200+ 2.2GHz Athlon 64 cpu.
K8T Neo-FIS2R
Radeon 9800pro
Seagate 7200.7 200GB drive.
380W Antec PSU.

Quote
Originally posted by $post[username]
I've tested notebook, minial power savings and battery. C'n'q still doesn't seem to work. Yes i've enabled it in bios. I downloaded the AMD Athlon™ 64 Processor Driver for Windows XP, Version (zip) 1.1.0.14 -
Yesterday my CnQ began to work fine. I've done the same as you:
1- Enable CnQ Bios option
2- Install the AMD athlon64 driver for XP
3- Set "minimal power savings" at windows xp energy options
I have installed the CoreCenter 1.6.8.0 (is the last version) utility, and I've set enable the CnQ in this application. You'll can see that the CPU velocity change "on demmand" and the CPU fan too.
Of course, I've the last VIA 4in1 drivers, 1.7 Bios ver. etc
My temp & MHz values are:
~40ºC ~ 800 MHz idle
~50ºC ~ 2000 MHz playing or that kind of stuff
Note that the PC case is open, because the PC is under my table and there is no good ventilation.

Results for my browser has prob with 1st inch and harf from new babbilon crap will not hipolink i can not sign in or register on any thing please help

results for my browser has prob with 1st inch and harf from new babbilon crap will not hipolink i can not sign in or register on any thing please help

has anyone solve this problem? i upgraded my iphone 4 to 5.1.1 and now i can see only ""We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care."
i tried mani sim card, laptops, wifi. but for 7 days the problem is still exist....
Please help me!!!

I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. Tis does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. This does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

Luis Sequeira1 wrote:
I have run things that are unsupported too (like 10.3 Panther on a Wallstreet Powerbook, anyone remember those? )
Hey Luis. I not only remember…I still have mine (OS 9)! Works perfectly well…for some things; just need to be selective about what I ask it to do. (Also have its big brother Pismo running Tiger, which is still an extremely competent machine.) When I take them out of their cases, I'm still amazed at the G3's build quality.
Russ

Need help with k8t neo ms-6702 and cpu compatiblility question.

I have a msi k8t neo motherboard socket 754 ms-6702 bios version 2.2 with a athlon 64 2800+ in my computer. I just bought a AMD Athlon 64 3700+ CPU Socket 754 .1MB cache. When i install it, my power goes on and i get no activity. Im wondering if i got a bad cpu off ebay or my bios isnt current enough ( i used msi live updating software and its currently at v 2.2) or does my motherboard not support this high of a cpu? Im not very computer literate. Thanks for any help and info. If i need to update my bios, i downloaded version 7.1 but i dont know how to flash it, can somone give me the steps

I had a bad experience with a 3700 bought on e bay ,turned out to be an engineering sample ."special m/b bios reqd" in my case I did get a boot and the engineering cmos message. genuine 3700 754's are quite rare and fetch premium prices.

PC with K8T Neo stopped powering up

Hello,
I built a pc with MSI K8T Neo motherboard, Athlon 64 3200+ processor, 1 Gig (2 x 512) Kingston value PC3200 RAM, ATI Radeon 9600 XT with 128 RAM, Maxtor 80 gig hd in a PowMax case with 400 W power supply. I installed Window 2000 on my machine with no problems. After I installed the video driver (3.10) the machine told me to reboot, which I did. However, the machine did not power back up and did not turn on through the power button. I used a volt meter to test both the power supply and the power button -- both work. I also took out the battery on the motherboard to reboot CMOS to no effect. I am starting to think that the problem could be with the motherboard but I am not sure.
Thanks for any advice.

did a cord maybe come loose or something?
this is the wierdest problem i have heard of so far...

K8T Neo V - Radeon X800 GTO Issues

Hi, I've just upgraded my PC to an MSI K8T Neo-V MB with an Athlon 3400 and am having
issues when running it with my Radeon X800 GTO :(
Everything boots up ok, until the point Windows XP has loaded and goes to the login screen.
At this point I get a variety of lockups, screen freezes until the monitor loses 'contact' with
the gfx card. It does seem like XP is still running in the background and only the gfx card has failed
but couldn't be sure
However, I can run it with my Radeon 9800 Pro (AGP 4X only mind you, AGP 8X locks up as well
but I can live with 4x based on what I've read elsewhere in this forum )
Steps I took:
When I found the 9800 worked, I performed a complete un-install of the drivers, rebooted to
make sure they were gone, powered down, swapped cards, booted and installed drivers, rebooted
and then it hung.
I'm running it with a 450 W power supply.
It's worth mentioning that this card/power supply worked fine on my ASROCK K7s8x MB before the upgrade.

Well, I'm now lighter in pocket to the tune of £70 ! I had to buy a new power supply in the end to test this one out. Whilst not my first choice, I ended up with a Jeantech Arctic 600W. Unfortunately the one I'd earmarked from PC World's website wasn't available in store (I couldn't wait for someone to deliver it to me lol ), however a quick check on the web namely 'Tom's Hardware' confirmed it as a reasonable PSU, and for £70 I should hope so to.
Now for the bad news...having uninstalled etc etc swapped cards out and installed new drivers....there is no difference at all. Same issue as before, you get to the XP login screen and it hangs in various different ways.
I don't think this is a power issue anymore, as all I am running with is:
The MSI Board
Athlon 64 3400(not overclocked)
80GB Maxtor 7200 IDE drive
1 x DVD Drive
1 x CDRW Drive
and possibly at some point, a Radeon X800!, but currently a Radeon 9800 Pro

High frequency sound with K8T Neo-FIS2R

Hello!
I have the MSI k8t neo-fis2r mainboard with bios v 1.6 and sometimes it makes a horrible high frequency sound and I cant figure out why.
My system are:
amd 64 3000 cpu and
Corsair Value S PC3200 DDR-DIMM 512MB Unbuffered, Non-parity, 64Megx64, CL2.5
My other components does not cause the sound (that I have found out by testing).
I wonder if the ram causes the sound? Can you please help me. The sound is so bad that I cant use my computer. It only appers during heavy system load, and not in windows. It has nothing to do with my video card (because I have tried with several different cards). My bios settings are default values + cool and quit enabled. I have the core center installed so the progam controls the cpu fan.
I really hope someone can help me.

The sound does not come from the speaker and I dont think it comes fom the cpu fan either. I think it comes from the motherboard, ram or the cpu. When I dont use my mouse it is quit but when I clik it makes this sound. Can it be that I have to set all values in bios for ram etc. manually instead of automatic?
When it comes to other electrical sources I have a TV standing 0.5 meter from the computer. Could thins cause the problem? I did not have the problem with my old motherboard which was a MSI K7T Turbo2.
The sound usually appers when I am benchamarking my system. For example 3dmark 2004. Because of this I thougt there was a problem wiht my vga card but after a changed to a new one...the situation was just the same.

6600GT not working with K8T neo-FIS2R

I recently returned a K8T NEO-FIS2R MB for repair. The problem was that the PS/2 and USB ports were broken. However the MB has been returned and the PS/2 and USB ports work fine. I posted about this several months ago.
Now the AGP port seems to be broken (not the actual slot). I have tried a 6800 Ultra and a 6600 GT (AGP version) GFX card in this slot. Both cards fail at the driver installation point. I have tried driver versions 66.93, 67.02 and 67.03. I also tried 3 versions of the via drivers 451, 453 and 455. Even tried XP with SP1 and SP2. The PC will sometimes BSOD, reset, won't boot into windows. The drivers sometimes install then other times they won't, etc. The problems only seem to be with the drivers for the GFX cards.
The 6600 GT works as I have tried it in another MB without any problems.
I know the memory works fine as I used memtest86+ for a couple of hours on the default settings without any errors and it works in another PC.
The spec of the PC is:
XP pro
K8T NEO-FIS2R MB
512MB corsair XMS at 2.5-3-7-3
XFX 6600GT
40gig HDD
FDD
Plextor CD writer
DVD Rom
PSU is a Q-tec 550W
I know Q-tec PSUs are not up to much from what I have read elsewhere in this forum, but I have had it running in a similar system with the 6800 Ultra installed without any trouble (even with the above MB before it went faulty). I have also tried a 400W PSU, that came with the case. The Voltages on the 12V line are between 12.00 and 12.03 when using the Q-tec PSU.
Has any body else had these problems with the 6600GT in the mentioned MB.
Also, how can I check the serial number on the MB with the label on the box, as this MB that was returned to me looks to “clean” to be the one I sent away for repair.
Thanks for any help

Hey, I'm glad to see a post on the new Gforce 6600GT AGP card. I just recently put together a brand new system (see my sig for specs). System runs great. The only thing I wanted to do was replace the video card, and after a great deal of anxiety I decided the Geforce 6600GT AGP was the best bang for the buck.
Well I got home, installed the card and never get passed the bios screen. (shows your processor, memory, memory siz), the screen u hit DEL to go into the bios.
The system doens't lock up, NUM LOCK can still be turned on and off, and CAPS can be turned of and on... but thats it. Just sits on that screen. I can't go into the bios either.
what settings do I need to do prior to isntalling this card to get it to work.
Let me know if you all need anymore details to help me out.
oh, I did reset my frequency to 10x200 (which is what I think the 3000+ is supposed to be at).

Big pb with k8T neo that cant' power up

Hello, my new K8T neo won't power up, fans turn for a seconde then everything stops ....
the green led flash every 2 sec
It start without the proc... (but the proc is good)
Here my config :
K8T neo
Athlon 64 3200 +
1Go ram samsung
Geforce 4 Ti 4200
I see on another forum that it could be an incompatibility with the graphic card !
If anyone could help me. thanks a lot
PS: sorry for my poor english

Quote
Originally posted by $post[username]
$post[Hello, my new K8T neo won't power up, fans turn for a seconde then everything stops ....
the green led flash every 2 sec
It start without the proc... (but the proc is good)
Here my config :]
Hi
welcome
The power led flashing is the power protection system, to reset take power cable out for 5 secs, then replace and re start. If it continues to do this, there is someting shorting, or not connected. The 4 pin square CPU power supply is connected to mobo.? Are all the stand off posts on the mobo lined up with the shielded holes in mobo - no extra ones fitted.
Other things it could be are PSU, the board needs over 18amps on the +12v line to boot, what are the amps on the 3.3v, the +5v, and the +12v lines, get them from label on side of PSU.
Could be several other things, like Heatsink not sitting on CPU properly, or a bent pin, loose wire or screw on mobo, etc.
cheers
jocko

K8T Neo and Kingmax Problems!!!!

Hi
Ok so basically ive got a K8T Neo Series K8T800 with a 64bit 3200+.
When I bought it came with 2x 256 Mb Sticks of PC2700 I think DDR-333.
Recently I bought 2x 512 sticks of Kingston Kingmax DDR-400 (MPXC22D-38KT3R)
It wont boot at all with them in it, the monitor doesn’t even get a signal.
Ive read the manual countless times and can’t find anything saying its incompatible.
I Have Tried using both sticks by them selves with no difference.
The ram is in slot 1 (I have tried all three just in case I was doing something wrong
I Have tried the Ram in another Computer and it worked great.
The Ram IS on the tested memory list Under Test Reports
If you could help me it would be greatly appreciated.
Cheers,
Zysen,

You may have Bios Timing issues. Timing in Bios for that RAM is 2.5,4,4,8 or you can set to auto. VDIMM should be auto and you may have to try using sockets 1 and 3 as mine gave issues in sockets 1 and 2.
You may also have to do a Bios reset.

Probs with k8t neo and radeon 9500 non pro

Similar Messages

Maybe you are looking for