Procedure Builder in 9iDS

Hi, I am looking for procedure builder in the Oracle 9i DS. Is there such a product? Has it been discontinued?
Thank you, -Cecil

Procedure Builder is no longer shipped as a stand alone product in Oracle9i Developer Suite.
What do you want to do with it? If you are looking for a PL/SQL development/debugging environment you can use Forms or even JDeveloper -
See : http://otn.oracle.com/products/jdev/htdocs/database/db_overview.html

Similar Messages

Procedure Builder does not come with Oracle 9iDS r2 (Complete)?

Hi All
I have enjoyed using Procedure Builder - but did not see opportunity to install with the Developer Suite.
Does anyone know where I could get PB? I am not interested in using the version that comes with Forms 6i...
Thank you!

Procedure Builder is no longer a stand alone product.
You can still edit and debug PL/SQL procedures from inside Oracle9i Forms.
You might also want to take a look at the PL/SQL development capabilities of Oracle9i JDeveloper.
It gives you the ability to debug PL/SQL stored procedures and it also has a helpful code insight when you write PL/SQL code in it.
Check out the Database Development viewlets at http://otn.oracle.com/products/jdev/viewlets/viewlet.html

Procedure Builder

Does Procedure Builder 6.0 support debugging of PL/SQL TABLE
type?
null

In first question I had ment Oracle 9i Developer Suit.
9i Developer Suit (9iDS) does not include The Procedure Builder or I can't find it :-).
I don't want to install Procedure Builder 6i.
Is there planned new version of The Procedure Builder?
Hello Can, e-mail adresin olmadigi icin buradan yaziyorum.
Henuz bulabilmis degilim. 9iDS ile birlikte gelmedi. Eger istersen
Internet Developer Suit 6i icerisinde geleni kullanabilirsin.
Ben sistemde sorun yaratabilecegini dusunerek kurmak istemiyorum.
Su an icin JDeveloper 9i'yi kullaniyorum. Istanbul'dan ve
bogazdan sevgilerle...
[email protected]

Procedure Builder - where to find

I can not find Procedure Builder. I have installed Oracle 9i (9.0.1.1.1) and Oracle 9iDS. Earlier on, proc builder used to be a part of application development where forms builder, schema builder, procedure builder, reports builder, etc., all were clubbed together in one location. I have looked at the bin subfolder of the client machine. I just can not find it.... Will somebody please help.
Thanks

Can't help you there, I never used Procedure Builder to debug. I've always done it the old fashioned way, with dbms_output and sqlplus. I only use PB to fix syntax errors and find line numbers...
I noticed that Forms 9i has a "Debug" menu containing several tools and a console. Maybe that's what you're looking for....

Execute Dynamic SQL statement using procedure builder

i want to execute a dynamic SQL statment using procedure builder not using forms
because my statement depending on a variable table name
i know that i can do that from forms using
FORMS_DDL('SQL_STAT');
but i wanna to use the procedure builder
which function i should use and how?
please explain in example if you don't mind.
thanks

Hi,
You can very well use DBMS_SQL Package supplied by Oracle for doing this.
Search for DBMS_SQL in OTN. You will get all info regarding this.
Regards.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by itslul:
i want to execute a dynamic SQL statment using procedure builder not using forms
because my statement depending on a variable table name
i know that i can do that from forms using
FORMS_DDL('SQL_STAT');
but i wanna to use the procedure builder
which function i should use and how?
please explain in example if you don't mind.
thanks<HR></BLOCKQUOTE>
null

Drag and Drop in Procedure Builder :-(

Drag and Drop works in SQL Worksheet BUT it does not work in procedure builder :'-(
It would be nice to have same feature working everywhere. The work around is first drag and drop table in SQL Worksheet to get syntax and then cutting and pasting it in procedure builder.
Production ver
Windows XP
10g

Just fixed this as well as the drop will drop the code where it is dropped instead of at the end or where the caret was when the drag started. Look for it when the first patch comes out.
-kris

Need sum help..........Regarding Oracle Procedure Builder

hi,
i wnt sum information abt oracle procedure builder.
i m preparing for 1zo-047,n wnt oracle procedure builder 2 practice.
cn ne1 plssssssssssss tel me whr shd i luk 4 it....
i cd nt found dis s/z newhr on internet,i even dnt knw whether i hv 2 download it from internet or its already present in the sql plus.
cn ne1 pls help me 2 resolve these queries.... its urgent....
thnx in advance

908759 wrote:
its urgent....It is urgent that you learn some language skills.
If you cannot express yourself with clarity and evidence of intelligence, then you will never get anywhere in life.
It actually hurt my head to try to understand whatever you typed into that post.

Problem in connecting to local db in procedure builder

I install oracle 8i for window 2000 personal edition in my local computer and also forms & reports 6i. I create a db during installing of oracle 8i. By using the sql worksheet I build up several tables. But when I try to use procedure builder in forms 6i to connect to my local data base, I can not. I do not know which userid and password and database name I should use. I tried scott/tigger or system/manager, all give me an error: can't find the service. Can somebody help me with the connection to my local database in the proceduce builder?
thanks

Hi,
The Oracle database is resided in another server.
Jo

Query builder, procedural builder - Oracle 8.17

I'm running Oracle 8.17 and I can't find query builder, procedural builder, report builder form builder and other builders. Where can I get these? I tried the universal installer and there are no options to install them.

Hi Fraser,
Thank you for responding.
I think I fixed that problem,actually there was a spelling
mistake in one of the parameter files.
But now I get another error message, says:
"ORA: 02068: following severe error from MSOLEDB
ORA: 28511: lost RPC connection to heterogenous
remote agent using
SID = (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)
(HOST=LOCAL_HOST)(PORT=1521)))(CONNECT_DATA=
(SERVICE_NAME=<SERVICE_NAME>)))
Do I have to configure the SQL Server network utilities?
I pinged both the servers ,they talk to each other.
But when I use tnsping ,the client machine (i.e.,the SQL Server
machine)talks to server(Oracle machine) but the server doesn't
talk to the client.
I am definitely not doing something right.
Asha.

Procedure Builder 9i developer suite

I have done a full install on my Windows 2000 machine, but can't find Procedure builder installed (or an option to install it). Does anyone know what I'm doing wrong?
thanks, robin

Nothing is wrong, it is simply not there. Check out the obsolesence paper on OTN.
You can still debug and create stored procedure from within Oracle Forms.

Cant find Procedure Builder...?

First of all, I am very new to this as if that isnt already apparent. I am following along in my PL/SQL book and got to the part where I am learning about procedure builder and I went to run it and it doesnt seem to be installed or included in what I am using. I downloaded 9i Database R2 Personal for Windows.
I have searched a good bit but have not been able to come up with any info on procedure builder after release 6. Is it called something else now or am I just missing it?
TIA!

Firstly, they give different colours to keywords, strings, comments, variables etc. You can get add-ins to TextPad to do this.
Secondly, compilation reports errors and attempts to pinpoint their location. Again, you can get line numbers in TextPad.
I agree that SQL*Plus and Notepad is a hairs shirt combo, but TextPad is a much moe flexible tool.
Why I prefer using TextPad and SQL*Plus rather than TOAD is that using TextPad forces me to work from scripts. This means I have an audit trail of the changes I've made, and a set of scripts to run whenever I need to recreate my work.
Using TOAD's GUI to (say) add a column to a table is tremendously productive the first time you do it. What happens when you need to roll out that change to UAT? Well, assuming you documented the need to make the change somewhere, you have to find a form of words to explain the change to your less-than-friendly live systems DBA and hope they click on the correct icon. How much simpler it id to just hand them two scripts - one to add the column and another to remove it we should need to regress the release.
Perhaps it is different for people who never make errors in their codeOn the contrary, it is precisely because I do make mistakes that I avoid using TOAD as an IDE for developing PL/SQL . TextPad and SQL*Plus (and poperly implemented source control - this is key) are the tools for me.
Cheers, APC

Encryption in Procedure Builder

Could anybody tell to me how to encrypt program units in Procedure Builder, like happens with SYS Program Units for every users?

There is a utlity called wrap.exe you can use it.

Procedure builder for 8i Personal

Hi
Had my 1070 training (PL/SQL) and want to prepare for exam.
I downloaded (and installed) the 8i personal edition. Now there's no procedure builder included in this package, only SQL*Plus.
Found out that ProcBuilder is included in the Developer package, so I downloaded this also.
8i Personals Universal Installer is V 1.6.0.9.0. When You try to install additional Products with it, it wants You to search for "products.jar", which is nowhere to find in the developer temporary installation directory (created from the zip).
So I ran setup from there (developer), and installed Procedure Builder only. I had to make another Oracle home, as he didn't let me install into d:\ora\ora81, so I made a d:\ora\orant. (A bunch of other stuff was installed also). Now I can start Procedure builder, but he doesn't connect (even when I type in exactly the same as in the SQL*Plus in my ora81 startgroup).
Error: PDE-POC011 ORA -12154 Servicename could not be resolved (Additional error depoc4).
What did I do wrong? (I had no dba training, so actually I'm in a blind flight, not knowing what actually I'm doing!)
All I want is the environment as in the training room, where I can run SQL*Plus and procedure builder to train and learn what they told me there. I spent several days now, don't ask me for my phonecosts for downloading several houndred megs, as the CD I got in the training didn't work at all, and I had to remove everything several times manually (including registry) No idea what all I missed to remove.
Any help possible with this sparse description?
Thank's in advance
Martin

I already have Oracle 8.0 Personal Edition, and I can start that database without any
password. But If I want to run SQL*Plus, then
I use SCOTT/TIGER as username/password and that works fine. But with this newer version
(Oracle 8i Personal Edition), I am having problem just starting the database.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by coolguy:
Did you try the default one? Tiger
<HR></BLOCKQUOTE>
null

Dbms_output in Procedure Builder

Is there some package (like dbms_output in SQL Plus) that can display text lines in programs on the server through Procedure Builder. I know about text_io package, but it only works on the client side.
Thanks.
Rajeev.

Firstly you need to do a dbms_output.enable(100000);
Then you need to use dbms_output.get_line(v_line,v_status);
to bring the data back into a variable.
Then you need to use .DESCRIBE to tell you the value of the variable.

Regarding "Procedure Builder"

In my PC I installed Oracle9iDS which is downloaded free form Oralce website, but I couldn't find "Procedure Builder" in this suite. So "Procedure Builder" is not included in DS free version? Or I didn't install properly?
Thanks in advance

As far as I know, Procedure builder is not available beginning with Oracle9ids(Experts, correct me if I am wrong). You may want to start looking at Oracle's JDeveloper.

Procedure Builder in 9iDS

Similar Messages

Maybe you are looking for