Procedure entry point could not be located

Just got CC three days ago. Now opening Bridge gets this error message:
The procedure entry point AMTRecordCodecInvocation could not be located in the dynamic link library C:\Program Files\Adobe\Adobe Bridge CC (64BIT) Bridge.exe.

There are several different scenarios that could lead up to the error, but typically it arises because an older version of the .dll has been copied into the wrong folder to workaround a different problem, and now after updating iTunes the outdated .dll that gets called cannot handle the request made of it.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The first box outlines the fix I suggested back in January. For some people it is all they need to do.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

  • Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly"  Error 7.....Help, please??

    Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library"  followed by "iTunes was not installed properly"  "Error 7".    Help, please??

    Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • The Procedure entry point Could not be located in the dynamic Link Library

    I have recently received an error message that starts out with "The Procedure entry point XXX Could not be located in the dynamic Link Library" and then I get an Error 7 (Windows error 127). iTunes will not start. I have uninstalled all Apple programs and then re-installed them. Still no luck. I am running Windows 8.1. I have tried systen restore too but with no luck.
    Any solutions or suggestions. This only started this evening when I tried to open iTunes!

    There are several different scenarios that could lead up to the error, but typically it arises because an older version of the .dll has been copied into the wrong folder to workaround a different problem, and now after updating iTunes the outdated .dll that gets called cannot handle the request made of it.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The first box outlines the fix I suggested back in January. For some people it is all they need to do.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • The procedure entry point  could not be located in the Dynamic link Library AuAudioComponentUI.dll in win 81.  adobe audition 7, The procedure entry point  could not be located in the Dynamic link Library AuAudioComponentUI.dll in win 81.  adobe audition

    New install - Win 8.1 - First run error.... trying to do some work for lifemasters.co.za - so testing it out....

    if using audition 7, is it patched to 7.2?  it sounds like that file is corrupt, unless someone here knows otherwise. adobe doesn't appear to take advantage of "the cloud" to repair installations or files, so if that file or the installation is corrupt you would need to do an uninstall and reinstall.
    Use the CC Cleaner Tool to solve installation problems

  • Procedure entry point could not be found

    I installed the trial version of PS CS6 on my Windows XP, but when I try to open the program I get an error message saying procedure entry point could not be located. How can i fix this so i can use the program?

    Photoshop CS6 requires Windows XP SP3.
    http://www.adobe.com/products/photoshop/tech-specs.html
    Is your XP up to date? Perhaps running SP2?

  • Dreawmeaver CS6 fails to launch: "entry point could not be located"

    I've tried to launch DW CS6 this morning and keep getting  "The procedure entry point could not be located in the dynamic link library D:\Adobe Creative Cloud\Adobe Dreamweaver CS6\Dreamweaver.exe"
    I recently installed Windows 8 Pro over the weekend and then had to re-isntall my Adobe software from my Creative Cloud subscrption, but DW was working fine yesterday.
    I've tried uninstalling DW and re-isntalling it without success - same error every time.
    InDesign, Illustrator and Photoshop launch without incident, there's nothing relevant I can find via Google, so I am stumped.
    Does ayone have any suggestions I might try?
    Update:
    Ikandi Design! reported a similar issue: http://forums.adobe.com/message/4757157
    - re-installing XP seems like an extreme solution, not really a viable option for me
    denniscking also reporting similar issue:  http://forums.adobe.com/message/4823191#4823191

    Same issue here. How could there still be no response to this? I was going to use CS6 since it has integrated PhoneGap support and actually knows what ColdFusion is. Very dissappointing!

  • "itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?

    I simply wanted to update my itunes and this is now the error message I get and can't access or even log into itunes or itunes store.
    "itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?
    Anyone have a solution?

    This error has the same pattern as those discussed in the first and third boxes of the user tip Troubleshooting issues with iTunes for Windows updates, suggesting that you've got an outdated .dll file that needs replacing. You should find libdispatch.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Apple Application Support
         C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    Delete it and then repair Apple Application Support from the control panel. If that doesn't work go for the full tear down and rebuild as outlined in the second box.
    tt2

  • When I boot my computer i get a message that says The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll.

    When I start up my laptop I get an error message that says 'The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll. I have tried to uninstall itunes and all its files, I have tried to install safari, i have tried to repair Apple application support but still when I boot laptop, I get the message....I am at a loss as to what will cure this!

    You should have one copy of CoreFoundation.dll in C:\Program Files\Common Files\Apple Application Support or C:\Program Files (x68)\Common Files\Apple Application Support if this is a 64-bit Windows.
    The detailed file properties should be as shown.
    If the file you have is correct check to see if there is another copy in the main iTunes folder. If so delete it and see if that helps.
    Otherwise try uninstalling/deleting folders/reinstalling iTunes again. See Troubleshooting issues with iTunes for Windows updates for more details. Your issue looks a bit like it might be a variation of the issue in the first box.
    Also worth checking that you have uninstalled the MobileMe control panel and any third party software that might try to talk to iTunes.
    tt2

  • Received error message "the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll.  unable to launch ICloud.  Any suggections?

    received error message  - the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll.  unable to launch iCloud.  Any suggections?

    I had roughly the same error. I fixed it by running the iCloud control panel update from apple software update. The problem cropped up after I ran the most recent iTunes update, I've personally been having issues with iTunes updates being finicky since upgrading to Windows 8.1, I've had to download installers rather than running the update directly through Software Update, so it's possible Apple is not fully addressing compatibility issues for newer versions of Windows. Ultimately it seems to be a missing file issue, so any update, installer, or install verification/repair that directly addresses the iCloud files should see and replace the missing file.
    Also it looks like Apple is either unaware of this problem or not addressing it at all, there are about a dozen support requests from within the last month all asking this same question regarding iCloud, just with different specific files unable to be found. None of them have answers.
    Hopefully this works for you

  • When I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP

    when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP in English
    == This happened ==
    Every time Firefox opened
    == start mozila firefox

    This issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
    The file dwmapi.dll is a Vista file and should not be present in Windows XP.
    See also [tiki-view_forum_thread.php?forumId=1&comments_parentId=417674]

  • HT1349 my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll"  then another window will come up telling to to uninstall the apple mobile and

    my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll"  then another window will come up telling to to uninstall the apple mobile and itunes and reinstall them?  will this delete everythin in the itunes account?  please help

    This might help https://discussions.apple.com/thread/5821701

  • HT4847 the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll. How do I fix?

    the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll. How do I fix?

    I am having the same problem.
    There is another link conversation going on with this. One suggestion was to open Itunes, click the help button and click updates.  This is supposes to open a windown with Iclould and itunes update but that did not work for me!
    I am continuing to search the Community Support area.

  • The procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll

    Please can you explain what this is the procedure entry point_objc_init_image could not be located in the dynamic link library objc.dll

    I am having the same problem.
    There is another link conversation going on with this. One suggestion was to open Itunes, click the help button and click updates.  This is supposes to open a windown with Iclould and itunes update but that did not work for me!
    I am continuing to search the Community Support area.

  • QT 7 gives install error prcedure entry point could not be located

    Installed QT7.
    When I tried to start it, got message
    Procedure entry point CFUniCharGetNumberofPlanesforUnicodePropertyData
    could not be located in the Dynamic Link Library QTCF.dll
    followed by
    Quick Time failed to initialize Error# - 2093

    Thank you Georgia!
    Those look okay. QuickTime.qts and QuickTimeVR.qtx are QuickTime files that are supposed to be there. qtintf.dll is a Delphi-Qt2.x Interface Library. Quick.IME is an input manager used to display East Asian language on the PC, and QUTIL.dll is associated with your quarantine utilities for your Windows filewalls.
    So if there isn't a misplaced QTCF.dll, there might be damage to the one in the right place. So we'll try a repair install again, taking a few extra explicit precautions this time.
    Restart the PC. Do not open any applications after the restart. Disconnect from the internet and/or your network. Now switch off all your security software (firewall, antivirus, antispyware).
    Now navigate to C:\Program Files\QuickTime\QYSystem\ and drag the QTCF.dll out onto your desktop.
    Now open your "Uninstall a program" control panel. Select QuickTime and click "repair".
    Reenable all your security software prior to reconnecting to the internet and/or your network.
    With the fresh QTCF.dll in place, does QuickTime now launch without the error message?

  • I tried to uninstall itunes and appropriate apple products on my computer.  It will not let me uninstall message I keep getting is"THE PROCEDURE ENTRY POINT_OBJC_INIT_IMAGE COULD NOT BE LOCATED IN THE DYNAMIC LINK LIBRARY OBJ.DLL.  CAN ANYONE HELP?

    I tried to update Itunes on my desktop computer and for some reason it did not work properly.  I am receiving the following message:
    "the procedure entry point_objec_ init_image could not be locaed in the dynamic link library objc.dll.  can you help?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

Maybe you are looking for