Procedure entry point OCIPCacheRollbackTx could not be located in...OCI.DLL
I had a Vb.net (vs2003) app on my desktop that I was running - everything was fine until I had to reboot my machine.
Now I get the following error:
The procedure entry point OCIPCacheRollbackTx could bot be located in the dynamic link library OCI.DLL
Note that I 3 different versions of Oracle - 9.2, 10.2 and 11.1 on my machine.
It is currently configured to use the Oracle 11's Oracle.dataaccess.dll
What is this error? and why would a reboot create a problem that was working before?
Any help on resolving this would be great. Note that I don't have that much experience with Oracle,so not familiar with all the DLLs and what they do and how they are used.
Sean
Hi Sean,
You can use [Process Explorer|http://sysinternals.com] to check to see what version of OCI.dll is loaded and from where.
I just checked my 11107p5 oci.dll using DependencyWalker and I have OCIPCacheRollbackTx in my oci.dll anyway. The oci.dll that comes with 1110620 also has it.
The error would indicate it found oci.dll, but oci.dll didnt have that entry point defined. The entry point is new to 11g so older versions wouldnt have it. So check to see where oci.dll is getting picked up from.
Greg
Similar Messages
-
The procedure entry point lnxnfft2 could not be located in the dll oracore8.dll
We had installed Oracle9iAS. We had not installed certain
optional tools such as Oracle Portals etc.
Now we had an application running on Tomcat earlier.
We were trying to port it into the Oracle9iAS.The application
was using Type 1 drivers(ie, used DSN on the local machine).
However after the installation while running the application the
following error occurs.
"The procedure entry point lnxnfft2 could not be located in the
dll oracore8.dll"
Could you help please.And please explain why it is happening and
how do i resolve it.??Metalink note 398937.1
-
The procedure entry point lnxnft2 could not be located in the dll oracore8.dll
We had installed Oracle9iAS. We had not installed certain
optional tools such as Oracle Portals etc.
Now we had an application running on Tomcat earlier.
We were trying to port it into the Oracle9iAS.The application
was using Type 1 drivers(ie, DSN type connections). However
after the installation while running the application the
following error occurs.
"The procedure entry point lnxnft2 could not be located in the
dll oracore8.dll"
Could anyone help please.And please explain why it is happening
and how do i resolve it.??I see that you have installed MDAC & Oracle ODBC but have you installed the NET8 Client? ODBC will not work unless NET8 Client installed along with Oracle ODBC. Then go into NET8 Easy Configuration and specify the server IP & SID etc... and then go to ODBC Administrator and specify the NET8 Connection you created without the "@TNS:" that you used with SQLNET.
I prefer to test my odbc configurations with Microsoft Excel since it is best suited to use ODBC to acquire data. -
Procedure entry point psoasyn could not be located in orapls.dll
hello every one,
I am run the report and show the folowing error.
procedure entry point psoasyn could not be located in orapls.dll !
help me for that..Thanks,
I set the path to
PATH=my_ora_home_dir\bin;my_ora_home_dir\jdk\jre\bin;my_ora_home_dir\jdk\jre\bin\classic;my_ora_home_dir\jdk\jre\bin\classic;my_ora_home_dir\jlib;my_ora_home_dir\jdk\bin
and it worked without ay errors.
(here my_ora_home_dir is the Oracle Home where the Reports 10g is installed)
One thing I noticed is, the path was already there, but a new Oracle Home was before everything else (I installed another product recently) , so it was looking in the new oracle home and giving up if it cannot find. -
When starting the iPlanet Calendar Server(iCS) 2.x on Windows NT, the following
error occurs:<BR>
<P>
The procedure entry point _chkesp could not be located in the dynamic link
library MSVCRT.dll
<P>
There are two ways to ensure that you have the correct version of the
MSVCRT.dll file.<BR>
<P>
<OL>
<LI>Install the latest Netscape Communicator browser, which will update the
MSVCRT.dll file to the
correct version.
<P>
<LI>Copy the MSVCRT.dll
file from a system that has the latest Communicator browser to the iCS
system.
</OL>
<P>
The calendar server should now start up.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
Not an error message I recognise personally but the error has the same pattern as those discussed in the first and third boxes, suggesting that you've got an outdated .dll file that needs replacing. You should find AVFoundationCF.dll in the Apple Application Support folder. Delete it and then repair Apple Application Support. If that doesn't work go for the full tear down and rebuild.
tt2 -
Complete text of error message when attempting to start Firefox.
The procedure entry point PL_Clear ArenaPod could not be located in the dynamic link library plds4.dll
Firefox never opens before or after the error message.
After I close the error message window, I also get message from ZoneAlarm (my security software) asking me to send them an error report.
I had just accepted an automatic update from Firefox prior to the problems occurring.Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
ugh...can anyone help me reload itunes on my pc...itunes 10 worked fine but I uninstalled it when i was having problems loading itunes 11...I am not sure how to correct my procedure entry point error...i have used my uninstall programs on my control panel numerous times to unistall my itunes and quik time downloads and every single time i shut down and reinstall them I am getting this same procedure entry point error...is there something else i can do ??? ugh !!!
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?
Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear. -
2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.
This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.
-
Please help
Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?
-
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.
I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps. -
When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?
Maybe you are looking for
-
Forms 6.0 Crashing When I press ALT button without any menu on a form, including the Window menu. Are there any patches available for this. Steps to Repeat. 1.Create a form using Forms Wizard. 2.Remove the Default Menu and Navigation Bar. 3.Make the
-
I have a fillable form that is used by everyone in the office. When the fields are filled we print using the form fields only option to print on our invoices. When I go to print it in Acrobat XI standard using the form fields only option, none of the
-
Running Adobe premiere in samung rv 520
Hello all I am wondering if I can run and install Adobe Premiere Elements on a Samsung RV 520 ? heres all the spec thanks ! Christian Specifications: Colour: Metallic Silver Operating System Genuine Windows 7 Home Premium (64 bit) Processor Intel Cor
-
How to access the currentPage and currentNode Objects in a Sling Servlet
I have a requirement to write a Sling Servlet instead of regular CQ5 JSP In a standard CQ5 JSP it's easy to use the currentPage and currentNode objects, as they are automatically added by the default includes <%@include file="/libs/foundation/global.
-
Hello, I am more of a windows person with not all too much in-depth knowledge about the Unix/Mac world (or anything, actually, as I feel right now ), please bear with me. Here's the situation: We have a number of Intel-based MacMinis at our institute