Procedure for BI Systems after HSC

Hello,
My landscape of BI 7.0 is formed for:
BID - BI Desenvolvimento
BIQ - BI Qualidade
BIP - BI Production
The systems BID (DEV) and BIP (PRD) they were created starting from
Homogenêos System Copy (HSC) of BIQ (QAS) and they are OK.
We have a system DBW (Productive BW 3.5 still) and I need to connect
BIQ and BIP at the same time in DBW (BW 3.5). But when I execute the
connection of BIQ with DBW in the transaction RSA1, I lose the
connection of BIP with DBW. I am using Logical Systems and different
RFC'S but even so a connection eliminates the other.
Does it exist more some procedure that should be executed in BID and
BIP by them have been created starting from a homogenênos (HSC) of
BIQ?
Best Regards,
Martinho Freitas

Similar Messages

Could anybody advise the general procedure for SAP system migration?

I may have chance to be involved into a SAP system migration. Generlly speaking, there are several SAP instances will be migrated into 1 box.The existing instances are 4.6C, and the target instance is ECC6.
Could anybody provide me some reference material for SAP system migration? or Is there any tools or software can facilitate the migration?
Thank you so much!
null

We are currently running and upgrade from 46C to ECC6 and I have found the following very usefull:
<a href="https://websmp108.sap-ag.de/upgrade-erp">Upgrade Guides</a>
SAP Notes:
Note 825146 - Add. info. on upgrading to SAP NW04s (SR1, SR2) MSSQL
Note 913971 - Add. info. on upgrading to SAP ERP Central Component 6.0 SR
Note 813658 - Repairs for upgrades to products based on SAP NW 2004s AS
Hope this helps!!
Phil
Message was edited by:
Phil Wade

Backup and Recovery procedures for production system

I am trying to decide and test a best backup/recovery approach for our DBXML database in the production environment. Right now I am trying to go through the documentation.
http://www.oracle.com/technology/documentation/berkeley-db/db/gsg_txn/CXX/filemanagement.html
What is the best option among offline, hot and incremental backups?
I am thinking of implementing incremental backups.
What are the constraints in implementing incremental backups? Is there a detailed step by step example to do this?
Can I test the backup and recovery procedures by copying the db files and log files from Linux (production) environment to my local machine (Windows XP)? I see only one log.00000000xx file in production and staging environments. It is of same size 52428800 in all our environments (both production and staging) at this point of time.
What is __db.001 file? What is the significance of this file in backup and recovery procedures?
A detailed input with example is greatly appreciated.
Thanks in advancs

Raghu,
A couple of points, up front:
1. the __db* files are the environment (cache, locks, various shared memory regions), and are not part of backup, other than the fact that you need to checkpoint or otherwise flush your cache to your database(s) for a full backup.
2. log files are not architecture-neutral. That is you can't use a log file created on linux and just use it safely on another hardware platform. It's OK to copy them around, but they can only be used on the same architecture that created them. Database files (containers) are entirely portable among hardware and operating system platforms.
I don't know of a step-by-step cookbook for backups. This is because of the variations among application needs. However, the procedures described on this page are pretty straightforward:
http://www.oracle.com/technology/documentation/berkeley-db/db/gsg_txn/CXX/backuprestore.html
I'm not sure what you mean by "constraints" on incremental backups. The only constraint is that you need to have a full backup first, or you won't be able to recover properly. Based on what I said above, the other constraint is that you'll only be able to recover on a machine of the same architecture as the one that created the log files.
As for testing, you can certainly copy your database and log files to your Windows machine, treating Windows as an offline backup. If you want to test recovery, you need to copy the files back to Linux. You'll start seeing additional log files when your log data starts to exceed the configured log file size.
Let me know if you need more clarification,
Regards,
George

Procedure for BI System copy (ABAP+JAVA) what is the best ?

Hello to all !
First time is my that work with BI.
In my company desired to refresh the data of production of BI, in the system test de BI.
The instance is Abap + Java. The database is too large.
I have a question which is the best procedure to refresh my system of Quality of BI with the data of BI production?
I appreciate the help me.
Thanks a lot.
Desiré

Hi Dcardena,
Check out this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/200ebc93-dabe-2910-c1a6-c4ec30b20e04
Raja

External procedures for RAC system

Hi Experts,
I have 4 nodes 11.1 RAC in red hat. I saw some node listener configuration with IP=FIRST and other nodes does not have IP=FIRST entry.
I made a search onlin and get statement as IP=FIRST at listening endpoints are for external procedures in the database.
I want to know which means is for external procedures in RAC ? does expert can show some example ?
Thanks
JIm

No the IP=FIRST is not for external procedures. It is to restrict the listener to listening on the specific IP address specified not just the port on any address. This is explained in the NET SERVICES GUIDE

Including SPAU for subsequent systems after the upgrade

Hello All,
We are upgrading our landscape from 4.7 to ECC6.0 EHP4. We have completed the ugrade of DEV, but forgot to include the SPAU adjustments in the the Postprocessing phase and have completed the Finalization phase. Once the upgrade was completed we have made the SPAU adjustments and included it in a request. We want to include the request in the upgrade of the subsequent systems. We have gone through the note 68678 and have a few queries.
1. Do we release the task, then choose the transport in SPAU with "Select for transport" and then carry out the steps in the note
or
2. Release the request in DEV and then do the steps in the note 68678.
If there is any other method to follow please suggest
Any suggestion is highy appreciated.
Thanks & Regards
Deepak

Hey Cheng,
Follow the below steps to select the transport for the subsequent steps
1. Release all the tasks but not the request.
2. Go to your upgrade directory in DEV system /usr/sap/DEV/upg/abap/bin.
3. It will prompt for your root directory. Enter the path /usr/sap/DEV/upg/abap
4. Use the command in the note
./SAPup export TA=C11K904711 TYPE=SPAU LOG=EXP.LOG REL=701
Then if you check the umpdauto.lst the request will be in the list.
Regarding the 2 requests, I think you should ask your development team to combine it into 1 as I am not so sure if 2 requests can be included in SPAU.
Let me know if you have any issues
Regards
Deepak

Simple backup procedure for B1 system

Hello - Is there any simple document/help which can be used as a guide to set up the daily back up of B1 system (SAP application and SQL DB)?
Thanks

Please check through this thread and the link in the thread to see:
Re: SBO BackUp Problem
Thanks,
Gordon

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Services to be checked after system restart for getting system status

Hi,
We are trying to identify all the services that are to be checked before we confirm that a system is available.
While performing a system status check on J2EE instances after restart of the system , after getting a respone on TELNET to the HTTP Port sometimes the system was found to be not completely up.
We have observed that though the server processes are down HTTP service responds to user requests.
Could you please help identify the other services which must also be checked to be completely sure that the system is UP ?
We have gone through the document "TCP/IP Ports Used by SAP Applications" in SDN.
But It doesn't talk about the ports to check for Java server processes.
For ABAP we do a telnet on Message server and so far we got it right.
Should we check on other services as well in ABAP stack systems to confirm on their availability?
Thanks
Prateek
Edited by: Prateek Gupta on Dec 5, 2011 8:32 AM
Edited by: Prateek Gupta on Dec 5, 2011 8:48 AM

Hi Prateek,
Please use below command to check if JAVA Stack/Instance is UP and Running or not.
jcmon pf=/usr/sap/<SID>/SYS/profile/instace profile name (If your Server O.S. is Solaris or Unix)
Then goto option 20 and you can find there Dispatcher, Server0 and SDM are UP and Running or not.
If everything is Up and Running, then you can goto your browser and paste there:
http://Hostname:5<XX>00
where <XX> is the System Number where your Java enginee/Stack is present.
In order to check ABAP Enginee is Up or not, you can check like this:
dpmon pf=/usr/sap/<SID>/SYS/profile/instace profile name (If your Server O.S. is Solaris or Unix)
it will show your work process are running or not.

What is the procedure for verifying that my photos, after syncing up my iPad and my iMac, actually are in iTunes?

What is the procedure for verifying that my photos, after syncing up my iPad and my iMac, actually are in iTunes?

iTunes manages your photos between the iPad and iPhoto on the iMac. If you have things set up correctly, then the photos will go to iPhoto for safe keeping and later use.

I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Procedure for system refresh

Hi friends,
I want to make a system refresh. Can any one send me the procedure for doing it.
Thnks in advance
Nagesh

Maria Graziano wrote:>
> I would like to do a refresh of DEV/QAS on windows2003
As mentioned already - http://service.sap.com/systemcopy
> Also, many SAP BASIS highly discourage refresh of DEV from Production, as in most cases this is the transport controller, etc.
>
> Is this true, then what is the workaround to get DEV cleaned up ?
Delete TMS configuration from all affected systems and recreate it.
Markus

Print to Go stopped working after install of KB2992611 on Windows 7 for x64 system

A large number of critical and importatnt Microsoft security related updates showed up on 11Nov2014 that were installed. Subsequently several failures happened after the restart (i.e. IE would freeze when started, Print to Go
stopped working - indicated that there was no connection to the Internet, the PrintToGoLog.txt had much more detail).
Other BB playbook users reported similiar problem after one of the updates KB2992611 was applied,
After KB2992611 (Security Update for Windows 7 for x64 system) was uninstalled, Print To Go functioned properly. Unfortunately, I.E still failing. Firefox is OK.
Solved!
Go to Solution.

Hi,
I recently updated by Q10 to the latest Rogers 10.3.1 software release, and was going through my apps to verify they were all still functional. I found that Print-to-Go was not working. As I do not frequently use the app, I do not know if the recent device software update is the cause.
After a bunch of searching around the web, I came across two possible issues:
1) SSL 2.0 setting within the Internet Options settings on my PC
2) Windows Update kb2992611
My PC is running Windows 7 64-bit Pro, with latest Print-to-Go driver and BB Link installed. The problem I encountered is that when printing from the PC the pop-up window would fail to load the page that allows you to sign in to Blackberry ID and verify the link to your device. The https://ptg.blackberry.com page would return a server error.
Enabling SSL 2.0 within the Internet Options on my PC appeared to fix this problem, as I was able to access the BBID login page. However printing documents would still fail.
I then uninstalled Windows Update kb2992611. This fixed the problem. Print-to-Go functioned as expected, and documents would appear on my device.
I then disable SSL 2.0 within the Internet Options on my PC, and there was no effect. Print-to-Go still functioned.
I then reinstalled Windows Update kb2992611 and Print-to-Go appeared to work (ie you could sign-in with BBid), but printing of documents would fail and give an error message. Uninstalling the Windows Update again fixed the problem and PTG would work fine.
So, it appears there is a conflict between Print-to-Go and Windows Update kb2992611.
Will Blackberry be updating their desktop PTG driver so that it is compatible with this Windows Update?
The Windows Update addresses a security issue, so I'm not comfortable leaving my PC with this update not installed.

Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778.Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding.

Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha


Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
    /// <summary>
    /// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
    /// determine whether or not the entity class should be generated.
    /// </summary>
    public class CodeWriterFilter : ICodeWriterFilterService
        //list of entity names to generate classes for.
        private HashSet<string> _validEntities = new HashSet<string>();
        //reference to the default service.
        private ICodeWriterFilterService _defaultService = null;
        /// <summary>
        /// constructor
        /// </summary>
        /// <param name="defaultService">default
implementation</param>
        public CodeWriterFilter( ICodeWriterFilterService defaultService )
            this._defaultService = defaultService;
            LoadFilterData();
        /// <summary>
        /// loads the entity filter data from the filter.xml file
        /// </summary>
        private void LoadFilterData()
            XElement xml = XElement.Load("filter.xml");
            XElement entitiesElement = xml.Element("entities");
            foreach (XElement entityElement in entitiesElement.Elements("entity"))
                _validEntities.Add(entityElement.Value.ToLowerInvariant());
        /// <summary>
        /// /Use filter entity list to determine if the entity class should be generated.
        /// </summary>
        public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
            return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
        //All other methods just use default implementation:
       public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
            return _defaultService.GenerateAttribute(attributeMetadata, services);
        public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
            return _defaultService.GenerateOption(optionMetadata, services);
        public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
            return _defaultService.GenerateOptionSet(optionSetMetadata, services);
        public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
            return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
        public bool GenerateServiceContext(IServiceProvider services)
            return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
    <entity>systemuser</entity>
    <entity>team</entity>
    <entity>role</entity>
    <entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you.

Get error messages for those procedures in some system tables

Hi expert,
when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
Many Thanks,

>
when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
>
No - there is no system log table.
You need to create your own logging package and log table and modify your procedure code to call your own logging procedures to log into your own log table.
The procedures in the log package would typically be defined with PRAGMA AUTONOMOUS_TRANSACTION so that the exceptions get logged even if your procedure performs a ROLLBACK.
See AUTONOMOUS_TRANSACTION in the PL/SQL Language Reference
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/autotransaction_pragma.htm
Here is an Oracle-Base article that shows how to use the pragma to perform logging.
http://www.oracle-base.com/articles/misc/autonomous-transactions.php

Procedure for BI Systems after HSC

Similar Messages

Maybe you are looking for