Procedure for configuring SAP XI

Hi
Experts can anybody help me in configuring SAPXI.
And give me the requirements and produre of configuring the XI.
thanks and regards,

Hi
follow the below link and documentation, SAP note 30289,
if confused at any step please write back and we can guide you and this configured and make it working if you have all the required Hardware Enabled already and working.
https://websmp103.sap-ag.de/saprouter
Learn more
Uses of SAProuter
How Does SAProuter Process Route Strings?
Configuring SAProuter
Documentation
https://websmp103.sap-ag.de/~sapidb/011000358700001657781997/
Regards
Raj

Similar Messages

  • Kindly explain the step by step procedure for configuring sales order stock

    Hi friends,
    can anybody explain the step by step procedure for configuring sales order stock.
    Stock that is used for a sales order. It is directly allocated to a sales order. Components can only be used to produce material ordered by the customer and the finished product can only be delivered to the customer via the sales order.
    You can manage valuated or non-valuated sales order stock.
    If the sales order stock is not valuated, it is managed via a cost collector. The system does not carry out invoice verification postings for goods movements, and you cannot obtain an overview of how the stock is valuated until the end of the settlement period in Controlling.
    If the sales order stock is valuated, you have immediate access to its value in Financial Accounting. The assigned accounts are debited and credited as a result of the valuated goods movements.
    but i am not clear of how to map it into sap.kindly explain it step by step.
    regards,
    willaims

    Follow the link
    this will explain about complete config
    http://help.sap.com/bp_bblibrary/600/Documentation/V4J_BB_ConfigGuide_EN_US.doc

  • What r spool requests and procedure of configuring printer in SAP

    Hello Experts,
    i hv one question? wt r spools and wt are spool requests ? what are they used for? also i need a step wise step procedure for configuring printer in SAP . My email id is [email protected] . Requested to revert at earliest as this is very urgent.
    points guaranteed.
    regards,
    Somya

    hi
    whenevr u print ur output , spoll no. will be generated.
    Go to TCode Sp01/SP02 and give the spool No. which u generated and there u can find ur spool with outputlist,
    The basic transaction to set an printer within an SAP system is SPAD.
    I would recommend you to access the online SAP help at the following URL where you will find detailed information on how to set printers :
    http://help.sap.com/saphelp_46c/helpdata/en/d9/4aa45b51ea11d189570000e829fbbd/frameset.htm
    regards
    ajai

  • Procedure for Output types

    Hi Gurus,
    Can any one please tell me the complete procedure for  configuring output type.
    Requiremnt is I have to configure a o/p type for  Order Confirmation  &  Invoice.
    regards,
    Ajoy

    HI,
    Thanks.
    my  ID --- ajitmphadke  athe rate of g mail.com
    I want to know how a output type is configured, what is condition record, partner profile, access sequence.
    Or send reply on same mail
    Thanks
    in advance
    Ajoy

  • How to configure release procedure for rate contracts release

    Dear all,
    How to configure release procedure for rate  contract following are the requirements
    they are two release codes c1 & c2 <=100000,>=100000
                    if  c1 is not there c2 has to be approved
         Change in the value of the rate contract contract
         Change in the validity of the rate contract
         Addition of deletion of line items
    While using a non u2013 released rate contract in the PO an error message should shoot out.
    Also the logic should be changed while using the rate contract in the PO.
    The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
    It should be possible to refer existing valid rate contracts in purchase orders.
    Regards,
    bhaskar

    Hi,
    In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables  for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
    class in standard is the same FRG_EKKO, you can use the same for contract.
    To distinguish if it's a contract or PO, EKKO-BSART can be used.
    For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
    You can restrict the document type to set up the release strategy for only contract.
    Of cause, you can also create your own release class Z* for contract copying standard
    one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
    OLME:
    -> contract
    ->Release Procedure for Contracts
    ->Define Release Procedure for Contracts
    ->Release Groups
    If you have already created the PO release class.
    Assign a new chracteristic of Document Category -BSTYP
    Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

  • Procedure for Standby Database for SAP ERP 6.0

    Hello All,
    We are using SAP ERP 6.0 with Oracle 10g with AIX 5.3.
    We are planning to setup a standby database for our SAP ERP 6.0 production system as part of remote DR site using Oracle Data Guard.
    I was under the assumption that i can first install an erp 6.0 (ABAP) system using homogeneous system copy from my erp 6.0 (ABAP) production system and then start configuring oracle dataguard.
    But the System Copy Guide "System Copy for SAP Systems Based on SAP NetWeaver 7.0 SR3 ABAP" has mentioned that "You cannot create standby systems with a system copy".
    Please suggest the best practise or the procedure for creating standby database for SAP ERP 6.0 system. Iam not looking at the steps for creating a pure oracle 10g standby database, but with SAP instances as well.
    Thanks in advance.
    CVS

    Hi,
    Please refer the below mentioned link for configuring data guard.
    http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10823/create_ps.htm
    Below mentioned are the sequence of stpes, which needs to be followed for setting up data guard.
    3.1 Configuring the Primary Database
    3.1.1 Enable archiving and define a local archiving destination
    3.1.2 Create a password file
    3.1.3 Configuring the Oracle networking files
    3.1.4 Set initialization parameters on the primary database
    3.1.5 Take Offline/Online backup of the primary database
    3.1.6 Create a control file for the standby database
    3.1.7 Prepare initialization parameter file for the standby database and start the primary database with the changed pfile.
    3.1.8 Copy all files from the primary host to the standby host
    3.2 Configuring the Standby Database
    3.2.1 Configuring the Oracle networking files
    3.2.2 Create a INIT parameter file for the standby database
    3.2.3 Copy the standby controlfile to the appropriate location
    3.2.4 Create Oracle Password File
    3.2.5 Start the physical standby database
    3.2.6 Initiate log apply services
    Regards,
    Ranjith

  • Complete procedure for implementing sms facility in SAP

    Hi All,
    Can you please tell me ? how can we enable SMS facility ( SAP to mobile ) .
    I know some settings thru tcode SCOT, but its still not working..  what will be the complete procedure for this?
    do we need to implement new SMS server for it.. or what new things need to do by me?
    plz tell me.. i know this que asked several times in SDN but i want more precise information on this...
    Thankss a lott in advance,
    Shailesh

    Hello,
    Check the below link, might help.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b03d0983-bda1-2b10-c09c-e93bb9956055&overridelayout=true
    http://sappandit.wordpress.com/2009/05/03/sms-setting-in-sap-scot-configuration-for-sms/
    Regards,
    Yoganand.V
    Edited by: Yoganand Vedagiri on Dec 11, 2009 2:02 PM

  • Maintain CIN configuration & Pricing Procedure for Trading Company

    Hi Experts,
    Our client is a Trading Company. In this company...first they purchase finish goods and than sale it. They are not selling their material to the manufactures. They are not creating the excise invoice.
    Please suggest us how to maintain CIN configuration & maintain Pricing Procedure for them.
    Thanks in advance.
    Regards,
    Shatrughan

    Hi,
    Create 2 tax codes in T-code FTXP
    1 for VAT, 2nd for CST
    then you define 2 condition types in v/06,
    ex:ZVAT,ZCST
    place these 2 condition types in your pricing procedure in V/08
    And in VK11 maintaine condition records.
    Thank you,

  • Real time Procedure for new configuration

    In real time what is the procedure for new configuration like new payment term. I want procedure in real time
    . thanks , Sravas   ...

    Hello,
       As long as your S2000 has an USB ADD, you will be able to use it with OmniDriver-SPAM.  The HR2000 will work fine.
      Here are two good videotutorials that will show you how to use OmniDriver-SPAM with its LabView dll to acquire spectra:
    http://spectroscopytv.com/2009/02/02/omnidriver-la​bview-part-1/
    http://spectroscopytv.com/2009/02/02/omnidriver-la​bview-part-2/
      Hope this helps,
    R

  • Document for configuration of the spend management in SAP E-Sourcing

    Hi All
    Is there any document for configuration of the spend management in SAP E-Sourcing 5.1
    I have checked the RG section of the application and also all the documentation delivered as a part of the ESO software download
    Unable to locate this, request you to redirect me to the link on the service marketplace from where I can download this, as far as I know, its not available there.
    Currently I get the following error mentioned below for every menu option clicked under the spend and Compliance Tab
    Error: The spend analysis environment is not ready to provide spend data
    Request feedback
    Regards
    Tridip

    Hi Kamalakar
    This is great piece of information, I checked the same place i found the following
    Module Name
    Auctions License       
    BOM License       
    Contracts License       
    Demand Aggregation License       
    Frictionless SRM Product License       
    Optimization License       
    Projects License       
    RFQuick License       
    RFx License       
    SRM Explorer License       
    XPress Print License
    Do you think am missing the spend license, whats that called, request you to let me know
    Regards
    Tridip
    Edited by: Tridip Chakraborthy on Apr 15, 2009 8:48 PM

  • Wlc 5508 : guest users to be configured only give access for internal SAP application

    Hi,
    I have one new requirement with one of the client.
    I have wlc 5508 with 6.0 firmware. I need to have one guest wlan which will have access only for internal SAP application.
    I have gone through cisco document for internet guest users , where web page will be redirected with user name and password once it is authenticated , we can access internet.
    Provided if we have access list configured in wlc ...  for internet access only /
    what about this mentioned scenario ?
    can anybody suggest on the same ?

    Hi Vinod,
    Go for the ACL on any Router or the switch.. i prefer not on the WLC..
    http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_tech_note09186a00800a5b9a.shtml
    Here is the link as well to do it on the WLC
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807810d1.shtml
    Lemme know if this answered ur question..
    Regards
    Surendra

  • SAP J2EE engine for configuring Java mail Service.

    Hi
    I am experiencing following exception when trying to use JAVA mail API.
    javax.mail.SendFailedException: Invalid Addresses;
    nested exception is:
    javax.mail.SendFailedException: 554 <email@ddress>: Recipient address rejected:
    Relay access denied
    email address above is valid..
    I have to use SAP J2EE engine for configuring Java mail Service.
    But is does not hav any such access permissions to check....!!

    Relay access denied
    To send mails from SAP system through the mail server which you have configured, SAP server should be permitted to relay through the mailserver. Then only you will be able to send mail to external email address. Otherwise, you will get the above message.
    You must contact the mail server administrator and ask him to add the ip of SAP server into the allowed relay list.
    If you are using MS exchange server as your mail server and if you have administrative access to the Exchange box, you can do it yourself by following the below steps:
    1.Verify that your Exchange computer is not an open mail relay. To do this, follow these steps:
    a.      Click Start, point to Programs, point to Microsoft Exchange, and then click System Manager.
    b.      In Exchange System Manager, expand the following object:
    Servers\Your_Exchange_Server_Name\Protocols\SMTP
    c.      Right-click the virtual SMTP server where you want to prevent mail relay, and then click Properties.
    d.      Click the Access tab, and then click Relay.
    e.      By default, open relay is blocked. The default settings are as follows:
    u2022     The Only the list below check box is selected.
    u2022     The Allow all computers which successfully authenticate to relay, regardless of the list above check box is selected.
    f.      If you must permit a single computer, a group of computers, or a domain to relay through the server, click Add. In the Computer dialog box, click the appropriate selection for the computers you want to relay through the server. Then, type the required information.
    Note Enabling access by IP address or by domain name is helpful for users who do not authenticate with the Exchange computer.
    g.      In the Relay Restrictions dialog box, click OK.
    h.      Click Apply, and then click OK in the Default SMTP Virtual Server Properties dialog box.
    hope this helps you out...
    Cheers,
    Jazz

  • Configure SAP for server-side trust

    Hi all,
    I am installing BusinessObejcts XI integration for SAP Solution. I need configure SAP for server-side trust. I have read BussinessObjects XI Integration for SAP Solution Installation Guide. In chapter 6, It introduce how to configure SAP Server-Side trust. But I don't understand how to configure SAP for server-side trust, specially configure SAP Cryptographic. Would you please to give me more detailed explanation?
    Please advise,
    Duypm

    Hi Duypm,
    the SAP server side configuration is part of the Installation Guide Chapter 6. It starts on Page 94.
    If you unclear about this and what SNC configuration means for the SAP server make sure you talk to the administrator for the SAP system. You need administrative rights for the SAP system and the system will have to be restarted as outlined in the installation guide
    Ingo

  • Configure SAP authentication for BusinessObjects

    Hi,
    I am configuring SAP authentication for BusinessObjects. I created a user account for BusinessObjects Enterprise on SAP with Authorization object, field, Value as "BusinessObjects XI Integration for SAP Solution Installation Guide". After add an SAP entitlement system to BusinessObjects Enterprise, I checked that an entitlement system. It show "User CRYSTAL has no RFC authorization for function group SYST." with CRYSTAL is user of SAP.
    Please, help me!!!
    Thanks
    Duypm

    Hi,
    My CRYSTAL_ENTITLEMENT Role as below:
    CRYSTAL_ENTITLEMENT
    |
    |--Manually     Cross-application Authorization Objects
    |     |_Manually      Authoriaztion Check for RFC Access
    |       |_ Manually      Authorization Check for RFC Access
    |       |______Activity                    All activities
    |       |______Name of RFC to be protected          *
    |       |______Type of RFC objects to protected      All value     
    |     
    __Manually     Basic: Administration
    __Manually     Authorization for file acccess
    ___Manually      Authorization for file access
    __Activity                     Read, Write
    __Physical file name               *
    __Program Name with Search Help     *
    __Manually      User Master Maintenace: User Groups
    __manually      User Master Maintenance: User Groups
                 |___Activity                Change, Display
                 |___User group in user master main     *
    I login CRYSTAL user directly on your SAP BW server using SAPGUI. It is ok.I don't get any error messages there.
    My SAP entitlement system to BOE as below:
    System is: PTS
    Client: 100
    Application
        Application server: sap-vpmn (with sap-vpmn is hostname BO server)
       System number : 00 (this is value of central instance number)
       Username: crystal
       Password : pythis
    Thanks & Regards
    Duypm

  • Online license procedure for NW ABAP Sneak Preview and Mini SAP works again

    The online license procedure for the NetWeaver ABAP Sneak Preview and Mini SAP systems at www.sap.com/minisap
    works again.
    Sorry for the inconvenience.
    Dirk

    I finally resolved my problem yesterday. That is the answer. I did exactly what you mention now: to try and try. I don't know what happened, but when I insisted it worked !
    Anyway, Thanks a lot to all
    Investiga

Maybe you are looking for